Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISSOLVERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Biogenic U(IV) oxidation by dissolved oxygen and nitrate in sediment after prolonged U(VI)/Fe(III)/SO 4 2- reduction

Sediment column experiments were performed to quantify the effect of biogenic iron sulfide precipitates on the stability of bioreduced uranium during and after a simulated bioremediation scenario. In particular, this study examined the effect of different oxidants (dissolved oxygen and nitrate) on biogenic U(IV) oxidation in sediment that experienced significant sulfate reduction in addition to Fe(III) and U(VI) reduction. The experimental set-up included five replicate columns (each 5 cm in diameter, 15 cm long and packed with background sediment from a site contaminated with uranium) that were bioreduced for 70 days by injecting a nutrient media containing 3 mM acetate and 6 mM sulfate prior to oxidation. Upon oxidation, iron sulfide precipitates formed during bioreduction acted as a buffer to partially prevent biogenic U(IV) oxidation. The iron sulfides were more effective at protecting biogenic U(IV) from oxidation when dissolved oxygen was the oxidant compared to nitrate. A constant supply of 0.25 mM and 1.6 mM nitrate over a 50 day period resulted in uranium resolubilization of 11% and 60%, respectively, while less than 1% of the uranium was resolubilized in the column supplied 0.27 mM dissolved oxygen during the same time period. Over time, oxidation increased pore water channeling, which was more pronounced during oxidation with nitrate. Finally, increased channeling with time of oxidation could affect the transport of an oxidant through the previously reduced zone, and hence the oxidation dynamics of the reduced species.

Moon, H. S.↗

Large-scale paleo water-table rise in a deep desert aquifer recorded by dissolved noble gases

Illuminating past hydrological and climatological conditions in arid regions may provide insights into future trends in groundwater availability. The main objective of this study is to explore paleorecharge processes in the deep regional Nubian Sandstone Aquifer (NSA), which stretches below the hyperarid deserts of the Sinai Peninsula (Egypt) and the Negev (Israel), using dissolved noble gas data. Extremely high amounts of dissolved excess air (Ne concentrations up to 4 × solubility equilibrium) were observed in the ancient ( 81 Kr-depleted) groundwater that was recharged during past pluvial epochs in the basin. Here, the observed unique excess air signal and the clear spatiotemporal structure of the noble gas compositions in the aquifer are hypothesized to reflect two major characteristics of the groundwater system: (a) large-scale, long-term rises in the water table that facilitate the entrapment and dissolution of air bubbles under increased hydrostatic pressure, and (b) the geological settings in the southern recharge area in Sinai, including an almost horizontal position of the layers and intercalation of low-permeability rock formations within the aquifer, which inefficiently reject air bubbles from groundwater, thereby allowing for substantial entrapment of bubbles that dissolve as the water table rises. Enhanced dissolution of entrapped air was also observed in other paleo-groundwater-containing regional sandstone aquifers across North Africa, which, together with the recent findings from the NSA, suggest that largescale water table fluctuations have likely extensively occurred during past pluvial periods over these (and possibly other) arid regions. A preliminary assessment of noble gas recharge temperatures (NGTs) indicates an apparent decoupling of surface and water table temperatures in the case of deep aquifers with a thick (hundreds of m) unsaturated zone. This observed decoupling calls for a re-evaluation of previously obtained NGT records and a need for future work to consider the modification of NGTs due to soil air fractionation and geothermal heating of the underlying deep unsaturated zones.

54 ENVIRONMENTAL SCIENCES↗

Neutron powder diffraction and difference maximum entropy method analysis of protium- and deuterium-dissolved BaSn{sub 0.5}In{sub 0.5}O{sub 2.75+{alpha}}

We propose a new method, a difference maximum entropy method (MEM) analysis of the neutron diffraction data, for revealing the detailed structure around hydrogen atoms in proton-conducting oxides. This MEM analysis uses the differences between the structure factors of protium- and deuterium-dissolved crystals. Simulations demonstrate that it not only provides the distribution of hydrogen atoms alone, but also improves the spatial resolution of MEM mapping around hydrogen atoms. Applied to actual diffraction data of protium- and deuterium-dissolved BaSn{sub 0.5}In{sub 0.5}O{sub 2.75+{alpha}} at 9 K, difference MEM analysis reveals that O-D bonds mostly tilt towards the second nearest oxygen atoms, and that the distributions of deuterium and oxygen atoms are probably insignificant in interstitial regions. - Graphical abstract: A novel method, difference maximum entropy method (MEM) analysis of the neutron diffraction data, is proposed for revealing the detailed structure around hydrogen atoms in proton-conducting oxides. This MEM analysis uses the differences between the structure factors of protium- and deuterium-dissolved crystals and improves the spatial resolution of the MEM mapping around the hydrogen atoms.

36 MATERIALS SCIENCE↗

Dissolving Nonionic Surfactants in CO 2 to Improve Oil Recovery in Unconventional Reservoirs via Wettability Alteration

CO 2 injection is a promising method for enhanced oil recovery (EOR) in unconventional shale reservoirs. Here, in this work, we postulate that CO 2 EOR may be improved by the dissolution of surfactants into CO 2 . Although CO 2 is a relatively good solvent for oil, we show that CO 2 and Eagle Ford oil are immiscible at compositions above 70 wt % CO 2 , even at pressures as high as 62 MPa. The presence of a CO 2 –oil interface at reservoir conditions indicates that the addition of a surfactant has the potential to improve oil recovery–via wettability alteration from oil-wet to CO 2 -wet, CO 2 –oil interfacial tension (IFT) reduction, or both. Three nonionic surfactants (branched tridecyl ethoxylate Indorama SURFONIC TDA-9, branched nonylphenol ethoxylate Indorama SURFONIC N-100, and linear dodecyl ethoxylate Indorama SURFONIC L12-6) were evaluated for CO 2 -solubility, shale wettability alteration, effect on CO 2 –oil IFT, ability to generate CO 2 –oil foams, and ability to increase oil extraction from Eagle Ford, Mancos, and Bakken shale cores. Each surfactant dissolved in CO 2 up to 1 wt % at pressures and temperatures commensurate with CO 2 EOR. CO 2 -dissolved surfactants did not significantly affect CO 2 –oil IFT or generate CO2–oil foams, but they did induce a dramatic change in the contact angle of an oil droplet on an oil-aged shale chip in CO 2 from strongly oil-wet (11°) toward intermediate CO 2 –oil wettability (82°) (at 80 °C, 27.6 MPa). The branched tridecyl ethoxylated surfactant, SURFONIC TDA-9, afforded the highest oil recovery in core soaking experiments–75%, compared to 71% by pure CO 2 . Analysis of oil extracts by gas chromatography revealed that heavier oil components were produced when the surfactant was added to CO 2 . These results indicate that CO 2 -dissolved surfactants may increase oil recovery from shale by wettability alteration from oil-wet toward CO 2 -wet.

04 OIL SHALES AND TAR SANDS↗

Dynamic Surface Incorporation of Pb 2+ Ions at the Actively Dissolving Calcite (104) Surface

The reaction of dissolved Pb 2+ with calcite surfaces at near-equilibrium conditions involves adsorption of Pb 2+ and precipitation of secondary heteroepitaxial Pb-carbonate minerals. A more complex behavior is observed under far-from-equilibrium conditions, including strong inhibition of calcite dissolution, development of microtopography, and near-surface incorporation of multiple monolayers (ML) of Pb 2+ without precipitation of secondary phases [where 1 ML ≡ 1 Ca/20.2 Å 2 , the crystallographic site density of the calcite (104) lattice plane]. However, the mechanistic controls governing far-from-equilibrium reactivity are not well understood. Here, in this study, we observe the interfacial incorporation of dissolved Pb 2+ during the dissolution of calcite (104) surfaces at pH ~3.7 in a flow-through reaction cell, revealing the formation of a ~1 nm thick Pb-rich calcite layer with a total Pb coverage of ~1.4 ML. These observations of the sorbed Pb distribution used resonant anomalous X-ray reflectivity, X-ray fluorescence, and nanoinfrared atomic force microscopy. We propose that this altered surface layer represents a novel sorption mode that is stabilized by conditions of sustained disequilibrium. This behavior may significantly impact the transport of dissolved metals during disequilibrium processes occurring in acid mine drainage and subsurface CO 2 injection and, if appropriately accounted for, could improve the predictive capability of geochemical reactive-transport models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning the Deoxygenation of Bulk-Dissolved Oxygen in Copper

Using synchrotron-based ambient-pressure X-ray photoelectron spectroscopy, we report the tuning of the deoxygenation process of bulk dissolved oxygen in copper via a combination of H 2 gas flow and elevated temperature. Here, we show that a critical temperature of ~580 °C exists for driving segregation of bulk dissolved oxygen to form chemisorbed oxygen on the Cu surface, which subsequently reacts with hydrogen to form OH species and then H 2 O molecules that desorb from the surface. This deoxygenation process is tunable by a progressive stepwise increase of temperature that results in surface segregation of oxygen from deeper regions of bulk Cu. Using atomistic simulations, we show that the bulk-dissolved oxygen occupies octahedral sites of the Cu lattice and the deoxygenation process involves oxygen migration between octahedral and tetrahedral sites with a diffusion barrier of ~0.5 eV.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dissolvable Template Nanoimprint Lithography: A Facile and Versatile Nanoscale Replication Technique

Nanoimprinting lithography (NIL) is a next-generation nanofabrication method, capable of replicating nanostructures from original master surfaces. In this work, we develop highly scalable, simple, and nondestructive NIL using a dissolvable template. Termed dissolvable template nanoimprinting lithography (DT-NIL), our method utilizes an economic thermoplastic resin to fabricate nanoimprinting templates, which can be easily dissolved in simple organic solvents. Additionally, we used the DT-NIL method to replicate cicada wings which have surface nanofeatures of ~100 nm in height. The master, template, and replica surfaces showed a >~94% similarity based on the measured diameter and height of the nanofeatures. The versatility of DT-NIL was also demonstrated with the replication of re-entrant, multiscale, and hierarchical features on fly wings, as well as hard silicon wafer-based artificial nanostructures. The DT-NIL method can be performed under ambient conditions with inexpensive materials and equipment. Our work opens the door to opportunities for economical and high-throughput nanofabrication processes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mapping Three-dimensional Dissolution Rates of Calcite Microcrystals: Effects of Surface Curvature and Dissolved Metal Ions

The morphological evolution of micron-sized calcite crystals dissolved in static acidic solutions, with and without dissolved Pb 2+ ions, was imaged using transmission X-ray microscopy (TXM). The area-normalized dissolution rates measured by TXM increased with time in both Pb-free and Pb-rich solutions but with distinct morphological evolution. Calcite reacted in Pb-free solutions exhibited rounding at corners and edges with faster dissolution at acute corners/edges than obtuse corners/edges. Numerical simulations indicate that this is controlled primarily by solution mass transport that is faster near the acute corners/edges. In comparison, dissolution of calcite in Pb-rich solutions was 50% slower than that in Pb-free solutions and exhibited less rounding at corners. Faces of the calcite rhombs exhibited increased surface roughness and the subsequent development of surface micropyramids that formed preferentially near the acute edges of the calcite rhombs. Spatially resolved dissolution rates reveal that pyramid formation is associated with reduced dissolution rates near the pyramid apex. Here, the results demonstrate the role of impurity metal ions in controlling the dissolution rate and the associated complexities in the morphological evolution of dissolving mineral surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oxidation of dissolved elemental mercury by thiol compounds under anoxic conditions

Mercuric mercury, Hg(II), forms strong complexes with thiol compounds that commonly dominate Hg(II) speciation in natural freshwater. However, reactions between dissolved elemental Hg(0) and thiols are not well understood although these processes are likely to be important in determining Hg speciation and geochemical cycling in the environment. In this study, reaction rates and mechanisms between dissolved Hg(0) and a number of selected organic ligands with varying molecular structures and sulfur (S) oxidation states were determined to assess the role of these ligands in Hg(0) redox transformation. We found that all thiols caused oxidation of Hg(0) under anoxic conditions but, contrary to expectation, compounds with higher S-oxidation states (e.g., disulfide) than thiols exhibited little or no reactivity with Hg(0) at pH 7. The rate and extent of Hg(0) oxidation varied widely, with smaller aliphatic thiols showing the greatest degree of oxidation. The mechanism of the oxidation is attributed to a two-step process involving adsorption of Hg(0) to thiols followed by the charge transfer from Hg(0) to electron acceptors. These observations demonstrate a unique thiol-induced oxidation pathway of dissolved Hg(0), with important implications for the redox transformation, speciation, and bioavailability of Hg for microbial methylation in anoxic environments.

Zheng, Wang↗

Kinetic controls on the complexation between mercury and dissolved organic matter in a contaminated environment

The interaction of mercury (Hg) with dissolved natural organic matter (NOM) under equilibrium conditions is the focus of many studies but the kinetic controls on Hg-NOM complexation in aquatic systems has often been overlooked. We examined the rate of Hg-NOM complexation using reactive Hg (HgR) measurements and C18 solid phase extraction in Upper East Fork Poplar Creek (UEFPC) in Oak Ridge, Tennessee, and in controlled laboratory experiments using a reference NOM isolate. Greater than 90% of the dissolved Hg at the headwaters of UEFPC was present as HgR and this fraction decreased downstream but remained >25% of the dissolved Hg at all sites. Equilibrium calculations indicate that Hg-NOM complexes should dominate throughout UEFPC, but the presence of HgR suggests that equilibrium conditions are not established. Rate constants for Hg-NOM complexation varied between 0.05 and 0.29 hr-1 in laboratory experiments. This study demonstrates the need to consider Hg-NOM complexation kinetics on processes such as Hg methylation and solid phase partitioning.

54 ENVIRONMENTAL SCIENCES↗

Linking Dissolved Organic Matter Composition to Landscape Properties in Wetlands Across the United States of America

Abstract Wetlands are integral to the global carbon cycle, serving as both a source and a sink for organic carbon. Their potential for carbon storage will likely change in the coming decades in response to higher temperatures and variable precipitation patterns. We characterized the dissolved organic carbon (DOC) and dissolved organic matter (DOM) composition from 12 different wetland sites across the USA spanning gradients in climate, landcover, sampling depth, and hydroperiod for comparison to DOM in other inland waters. Using absorption spectroscopy, parallel factor analysis modeling, and ultra‐high resolution mass spectroscopy, we identified differences in DOM sourcing and processing by geographic site. Wetland DOM composition was driven primarily by differences in landcover where forested sites contained greater aromatic and oxygenated DOM content compared to grassland/herbaceous sites which were more aliphatic and enriched in N and S molecular formulae. Furthermore, surface and porewater DOM was also influenced by properties such as soil type, organic matter content, and precipitation. Surface water DOM was relatively enriched in oxygenated higher molecular weight formulae representing HUP High O/C compounds than porewaters, whose DOM composition suggests abiotic sulfurization from dissolved inorganic sulfide. Finally, we identified a group of persistent molecular formulae (3,489) present across all sites and sampling depths (i.e., the signature of wetland DOM) that are likely important for riverine‐to‐coastal DOM transport. As anthropogenic disturbances continue to impact temperate wetlands, this study highlights drivers of DOM composition fundamental for understanding how wetland organic carbon will change, and thus its role in biogeochemical cycling.

Environmental Sciences & Ecology↗

Thermal responses of dissolved organic matter under global change

The diversity of intrinsic traits of different organic matter molecules makes it challenging to predict how they, and therefore the global carbon cycle, will respond to climate change. Here we develop an indicator of compositional-level environmental response for dissolved organic matter to quantify the aggregated response of individual molecules that positively and negatively associate with warming. We apply the indicator to assess the thermal response of sediment dissolved organic matter in 480 aquatic microcosms along nutrient gradients on three Eurasian mountainsides. Organic molecules consistently respond to temperature change within and across contrasting climate zones. At a compositional level, dissolved organic matter in warmer sites has a stronger thermal response and shows functional reorganization towards molecules with lower thermodynamic favorability for microbial decomposition. The thermal response is more sensitive to warming at higher nutrients, with increased sensitivity of up to 22% for each additional 1 mg L -1 of nitrogen loading. The utility of the thermal response indicator is further confirmed by laboratory experiments and reveals its positive links to greenhouse gas emissions.

54 ENVIRONMENTAL SCIENCES↗

Quantification of Dissolved O 2 in Bulk Aqueous Solutions and Porous Media Using NMR Relaxometry

Effects of dissolved paramagnetic oxygen (O 2 ) in water on 1 H nuclear magnetic resonance (NMR) Carr-Purcell-Meiboom-Gill (CPMG) experiments is evaluated at a 1 H Larmor frequency of 2 MHz. Dissolution of O 2 into water significantly reduces the 1 H transverse relaxation coefficient (T 2 ). For deoxygenated water, T 2 is 3388 ms, water at ambient atmospheric conditions (7.4 mg/L O2) exhibits a T2 of 2465 ms, and dissolution of 2710 mg/L O 2 further reduces T 2 to 36 ms. The results were fit with an empirical model to facilitate prediction of T 2 times for bulk water as a function of paramagnetic oxygen concentrations in solution. Dissolved O 2 also greatly influences 1 H NMR CPMG experiments of confined water in a model system composed of Berea sandstone. For this system, 90 mg/L O 2 in H 2 O enhances T 2 relaxation of bulk water such that the relaxation time is comparable to physically confined water in the sandstone pores. Given the sensitivity of NMR T 2 coefficients to paramagnetic oxygen, low-field NMR-based characterization of fluid and porous media structure requires control of dissolved oxygen, as geospatial variation in the partial pressure of O 2 alone is expected to perturb fluid and pore relaxation times by up to 60 and 36%, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data for Kim et al., "Variations in the optical and molecular composition of dissolved organic matter exported from coastal wetlands"

Knowledge about sources and composition of marsh-derived dissolved organic matter (DOM) is critical for understanding the role of marshes in coastal biogeochemical cycling and the fate of marsh-derived DOM in the ocean. To investigate tidal variability in composition of marsh-derived DOM, Kim et al. examined the optical and molecular characteristics of hourly surface water samples at three tidal creeks in the Chesapeake Bay. Groundwater samples along the terrestrial landscape gradient as well as estuarine water from the adjacent estuary at each site were also collected to help resolve sources of surface water DOM. Samples were collected in summer 2024 at three sites – SWH: Sweet Hall Marsh, GCW: Kirkpatrick Marsh, and GWI: Goodwin Islands – which are part of synoptic sites in the Chesapeake Bay region of the COMPASS-FME (Coastal Observations, Mechanisms, and Predictions Across Systems and Scales - Field, Measurements, and Experiments) project. Surface water samples were collected hourly over a 48-hour period at each site. Groundwater and estuarine water samples were collected once. This dataset includes- Surface water depth and salinity- Dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) concentrations- Optical indices and relative composition of parallel factor analysis (PARAFAC) components- High resolution mass spectrometry data.

54 ENVIRONMENTAL SCIENCES↗

Designs of Column Separation Processes for Recovery of Molybdenum from Dissolved High-Density LEU Target - Further Studies

The Global Threat Reduction Initiative (GTRI) Conversion Program develops technology necessary to convert civilian facilities that use high enriched uranium (HEU) to low enriched uranium (LEU) fuels and targets. The conversion of conventional HEU dispersion targets to LEU for the production of 99 Mo production requires approximately five times the uranium in a target to maintain the 99 Mo yield per target. Under GTRI, Argonne National Laboratory (Argonne) is developing two frontend options for the current processes to allow the use of LEU-foil targets. In both processes, the aim is to produce a product after the frontend that will be compatible with current purification operations and that will, with the same number of targets irradiated, provide the same or a higher yield of 99 Mo at the end of processing. The goal of the frontend process is to deliver a product solution that is of the same or higher Mo purity than the current solution and is of equal or better compatibility with current purification process. In the first frontend option, the LEU foil (contained in a thin [10–15 µm] Ni fission-recoil barrier) is removed from the annular target and dissolved in nitric acid. In the dissolution, the uranium, nickel, and all fission and activation products are dissolved; the solution will be ~7 mM Mo and ~450 g-U/L, and the nitricacid concentration after dissolution will be ~1 M. The resultant solution will then be run through a column to recover Mo from other target components; the Mo will be stripped from the column with a sodium hydroxide solution that will be compatible with the current purification processes used for dispersion targets. The volume of dissolved-foil solution is assumed to be 500 mL, and the pressure drop, ΔP, constraint of 0.8 atm is based on the use of vacuum/gravity fluid transfer system. Therefore pressure loss is limited to <1 atm; hence a value of 0.8 was chosen.

Stepinski, Dominique C.↗

Wavelength Dispersive X-ray Fluorescence Analysis of Actinides in Dissolved Nuclear Fuels

There is an urgent need for an instrument that can quickly measure the concentration of Plutonium and other Actinides mixed with Uranium in liquids containing dissolved spent fuel rods. Parallax Research, Inc. proposes to develop an x-ray spectrometer capable of measuring U, Np and Pu in dissolved nuclear fuel rod material to less than 10 ppm levels to aid in material process control for these nuclear materials. Due to system noise produced by high radioactivity, previous x-ray spectrometers were not capable of low level measurements but the system Parallax proposed has no direct path for undesired radiation to get to the detector and the detector in the proposed device is well shielded from scatter and has very low dark current. In addition, the proposed spectrometer could measure these three elements simultaneously, also measuring background positions with an energy resolution of roughly 100 eV making it possible to see a small amount of Pu that would be hidden under the tail of the U peak in energy dispersive spectrometers. Another nearly identical spectrometer could be used to target Am and Cm if necessary. The proposed spectrometer needs only a tiny sample of roughly 1 micro-liter (1 mm 3 ) and the measurement can be done with the liquid flowing in a radiation and chemical immune quartz capillary protected by a stainless steel rod making it possible to continuously monitor the liquid or to use a capillary manifold to measure other liquid streams. Unlike other methods such as mass spectroscopy where the sample must be taken to a remote facility and might take days for turn-around, the proposed measurement should take less than an hour. This spectrometer could enable near real-time measurement of U, Pu and Np in dilute dissolved spent nuclear fuel rod streams.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Amount and reactivity of dissolved organic matter export are affected by land cover change from old-growth to second-growth forests in headwater ecosystems

Headwater forest ecosystems of the western USA generate a large portion of the dissolved organic matter (DOM) transported in streams across North America. Land cover changes that alter forest structure and species composition affect the quantity and composition of DOM transferred to aquatic ecosystems. Clear-cut harvesting affects ~1% of the forest area of North America annually, leaving most western forests in varying stages of regrowth and the total area of old-growth forest is decreasing. The consequences of this widespread management practice on watershed carbon cycling remain unknown. We investigated the role of land cover change, because of clear-cut harvesting, from mixed-species old-growth to lodgepole pine-dominated second-growth forest on the character and reactivity of hillslope DOM exports. We evaluated inputs of DOM from litter leachates and export of DOM collected at the base of trenched hillslopes during a 3-year period (2016–2018) at the Fraser Experimental Forest in north-central Colorado, USA. Dissolved organic carbon and total dissolved nitrogen were higher in lateral subsurface flow draining old- versus second-growth forest. Fluorescence spectroscopy showed that the DOM exported from the old-growth forest was more heterogeneous and aromatic and that proteinaceous, microbially processed DOM components were more prevalent in the second-growth forest. Biological oxygen demand assays revealed much lower microbial metabolism of DOM in litter leachate and subsurface exports from the old-growth forest relative to second growth. Old-growth and second-growth forests are co-mingled in managed ecosystems, and our findings demonstrate that land cover change from a mixture of conifer species to lodgepole pine dominance influences DOM inputs that can increase the reactivity of DOM transferred from terrestrial to aquatic ecosystems.

54 ENVIRONMENTAL SCIENCES↗

H-Canyon Dissolver Offgas Monitoring Using Raman Spectroscopy

This report describes the development and in facility demonstration of a Raman spectrometer to monitor known aluminum offgas components generated during the dissolution of Spent Nuclear Fuel at the Savannah River Site H-Canyon facility. The presence of these gases is an indicator that material is actively being dissolved. This process monitoring technique, which measures the offgas in real time, has the potential to improve the efficiency of facility operations. If the dissolution time is too short, time is wasted due to extended dissolution periods with additional probing of the dissolver pot to confirm that fragment levels are below the thresholds for continuing to the next charge or moving the dissolvent to a receiving tank. If the dissolution time is too long, time and energy are wasted.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗