Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Materials Data on Cs(Zr3I7)2 by Materials Project

Cs(Zr3I7)2 crystallizes in the orthorhombic Cmce space group. The structure is two-dimensional and consists of two Cs(Zr3I7)2 sheets oriented in the (1, 0, 0) direction. Cs1+ is bonded in a 12-coordinate geometry to eight I1- atoms. There are a spread of Cs–I bond distances ranging from 3.96–4.21 Å. There are two inequivalent Zr+2.17+ sites. In the first Zr+2.17+ site, Zr+2.17+ is bonded to five I1- atoms to form corner-sharing ZrI5 square pyramids. There are a spread of Zr–I bond distances ranging from 2.88–3.10 Å. In the second Zr+2.17+ site, Zr+2.17+ is bonded in a distorted see-saw-like geometry to four I1- atoms. All Zr–I bond lengths are 2.93 Å. There are five inequivalent I1- sites. In the first I1- site, I1- is bonded in a 2-coordinate geometry to two Zr+2.17+ atoms. In the second I1- site, I1- is bonded in a distorted bent 120 degrees geometry to two equivalent Zr+2.17+ atoms. In the third I1- site, I1- is bonded in a 3-coordinate geometry to one Cs1+ and two equivalent Zr+2.17+ atoms. In the fourth I1- site, I1- is bonded in a 2-coordinate geometry to one Cs1+ and two equivalent Zr+2.17+ atoms. In the fifth I1- site, I1- is bonded in a 3-coordinate geometry to one Cs1+ and two Zr+2.17+ atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Radiochronometric analysis of an historic Cs-137 activity standard

In this work, a 137 Cs activity standard discovered during routine inventory was analyzed to determine its model age using radiochronometry. The aqueous activity standard was separated using an established separation method that employs commercially available Sr resin. The method was also tested against a nuclear forensics reference material developed specifically for benchmarking 137 Cs radiochronometry methods. Results of the analyses showed good agreement between the results and the certified values of the reference material. Analysis of the discovered activity standard were also in good agreement with the activity certification date, though uncertainty was higher due to natural Ba contaminating the sample and the stable 133 Cs used as a carrier during the standard’s production.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Comparison and calibration of dose delivered by 137 Cs and x-ray irradiators in mice

Objective. The Office of Radiological Security, U.S. Department of Energy's National Nuclear Security Administration, is implementing a radiological risk reduction program which seeks to minimize or eliminate the use of high activity radiological sources, including 137 Cs, by replacing them with non-radioisotopic technologies, such as x-ray irradiators. The main goal of this paper is to evaluate the equivalence of the dose delivered by gamma- and x-ray irradiators in mice using experimental measurements and Monte Carlo simulations. We also propose a novel biophantom as an in situ dose calibration method. Approach. We irradiated mouse carcasses and 3D-printed mouse biophantoms in a 137 Cs irradiator (Mark I-68) and an x-ray irradiator (X-Rad320) at three voltages (160 kVp, 225 kVp and 320 kVp) and measured the delivered radiation dose. A Geant4-based Monte Carlo model was developed and validated to provide a comprehensive picture of gamma- and x-ray irradiation in mice. Main Results. Our Monte Carlo model predicts a uniform dose delivered in soft-tissue for all the explored irradiation programs and in agreement with the absolute dose measurements. Our Monte Carlo model shows an energy-dependent difference between dose in bone and in soft tissue that decreases as photon energy increases. Dose rate depends on irradiator and photon energy. We observed a deviation of the measured dose from the target value of up to –9% for the Mark I-68, and up to 35% for the X-Rad320. The dose measured in the 3D-printed phantoms are equivalent to that in the carcasses within 6% uncertainty. Significance. Our results suggest that 320 kVp irradiation is a good candidate to substitute 137 Cs irradiation barring a few caveats. There is a significant difference between measured and targeted doses for x-ray irradiation that suggests a strong need for in situ calibration, which can be achieved with 3D-printed mouse biophantoms. A dose correction is necessary for bone doses, which can be provided by a Monte Carlo calculation. Lastly, the biological implications of the differences in dose rates and dose per photon for the different irradiation methods should be carefully assessed for each small-animal irradiation experiment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2020

A Comparison of Cs-137 γ Rays and 320-kV X-Rays in a Mouse Bone Marrow Transplantation Model

US homeland security concerns regarding the potential misuse of some radiation sources used in radiobiological research, for example, cesium-137 ( 137 Cs), have resulted in recommendations by the National Research Council to conduct studies into replacing these sources with suitable X-ray instruments. The objective of this research is to compare the effectiveness of an X-RAD 320 irradiator (PXINC 2010) with a 137 Cs irradiator (Gammacell-1000 Unit) using an established bone marrow chimeric model. Using measured radiation doses for each instrument, we characterized the dose–response relationships for bone marrow and splenocyte ablation, using a cytotoxicity-hazard model. Our results show that the X-RAD 320 photon energy spectrum was suitable for ablating bone marrow at the 3 exposure levels used, similar to that of 137 Cs photons. However, the 320-kV X-rays were not as effective as the much higher energy γ rays at depleting mouse splenocytes. Furthermore, the 3 X-ray levels used were less effective than the higher energy γ rays in allowing the successful engraftment of donor bone marrow, potentially as a result of the incomplete depletion of the spleen cells. More defined studies are warranted for determining whether bone marrow transplantation in mice can be successfully achieved using 320-kV X-rays. A higher X-ray dose then used is likely needed for transplantation success.

320-kV X-rays↗
DOE OSTI2021

Influence of Cs Promoter on Ethanol Steam-Reforming Selectivity of Pt/m-ZrO 2 Catalysts at Low Temperature

The decarboxylation pathway in ethanol steam reforming ultimately favors higher selectivity to hydrogen over the decarbonylation mechanism. The addition of an optimized amount of Cs to Pt/m-ZrO 2 catalysts increases the basicity and promotes the decarboxylation route, converting ethanol to mainly H 2 , CO 2 , and CH 4 at low temperature with virtually no decarbonylation being detected. This offers the potential to feed the product stream into a conventional methane steam reformer for the production of hydrogen with higher selectivity. DRIFTS and the temperature-programmed reaction of ethanol steam reforming, as well as fixed bed catalyst testing, revealed that the addition of just 2.9% Cs was able to stave off decarbonylation almost completely by attenuating the metallic function. This occurs with a decrease in ethanol conversion of just 16% relative to the undoped catalyst. In comparison with our previous work with Na, this amount is—on an equivalent atomic basis—just 28% of the amount of Na that is required to achieve the same effect. Thus, Cs is a much more efficient promoter than Na in facilitating decarboxylation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Colloidal Synthesis of Palladium Nanocluster‐Decorated Cs 3 Sb 2 Cl 9 Perovskite Heterostructural Nanorods for Enhanced CO 2 Photoreduction

Developing efficient and sustainable photocatalysts for CO 2 reduction remains a significant challenge, particularly with environmentally benign materials. Here, in this study, we report the first one-step synthesis of metal–lead-free perovskite heterostructural nanocrystals by decorating Cs 3 Sb 2 Cl 9 perovskite nanorods with size-controlled Pd nanoclusters via a one-step hot-injection method. The resulting Pd-Cs 3 Sb 2 Cl 9 heteronanorods (HNRs) exhibit strong interfacial electronic coupling, enhanced charge separation, and excellent colloidal stability. Transient absorption spectroscopy and DFT calculations reveal a built-in electric field that drives directional electron transfer from the perovskite host to the Pd domains. Under UV irradiation, the Pd-Cs 3 Sb 2 Cl 9 HNRs demonstrate excellent CO 2 photoreduction activity with high CH 4 selectivity, achieving a record apparent quantum yield (AQY) of 2.62% among halide perovskite nanocrystal-based systems with a large electronic yield of 689.3 ± 12.2 µmol·g cat −1 . In situ spectroscopic monitoring and Gibbs free energy analysis further unveil a Pd-facilitated reaction pathway involving stabilization of key intermediates. This work introduces a new class of lead-free perovskite-based heterostructures through a facile one-step synthesis strategy and offers a new design principle for next-generation photocatalysts for solar fuel production.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Cs retention and diffusion in C-S-H at different Ca/Si ratio

Cement and concrete are commonly used in the construction of repository sites for radioactive wastes. The correct isolation of those contaminants requires good adsorption and low diffusion rates. Both parameters are highly affected by many factors, such as pH, temperature or composition. The large variability of experimental conditions and formulations makes it extraordinarily difficult to tackle the influence of each of them independently in experimental samples. To this effect, molecular dynamics simulations have been employed in this study to investigate the role of the composition in the capacity to retain Cs and diffusivity of these ions in calcium silicate hydrate (C-S-H) gel pores. The results indicate that the adsorption of Cs ions is worsened at high Ca/Si ratios due to a lower interaction of the cations with the C-S-H surface, while hydrophilicity of the C-S-H nanopore rises, resulting in higher long-range ordering and lower diffusion coefficients of Cs ions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Influence of porous aluminosilicate grain size materials in experimental and modelling Cs + adsorption kinetics and wastewater column process

This paper focuses on the influence of the grain size of a geopolymer based adsorbent on its Cs + adsorption performances both in batch and fixed-bed process. The geopolymer phase was used as a binder to support NaY zeolite particle in a 20 wt% charged porous composite with 160 m 2 .g –1 of porous surface area. These samples were shaped with three grain sizes (50 /100/500 µm) to remove 80–90 mg/g of Cs + in batch and column operations. After their microstructural and porous characterizations, their efficiency and adsorption characteristics were investigated through adsorption isotherms and kinetic in the two processes. While the grain size has no influence on the maximal extraction capacity of the adsorbent, it strongly affects the sorption kinetic. By coupling experimental data and a modelling approach, the complex sorption mechanism was highlighted, suggesting a new insight of the contaminant sorption kinetic. Then, comparison of batch and column adsorption experiments illustrates the detailed explanation of various process parameters for column study. The results show challenges for fixed-bed column utilization by the choice of the appropriate grain size as a compromise between the material sorption kinetic and hydrodynamic considerations. Furthermore, this is of high importance to more accurately optimize the design of column adsorption to assess the transport of Cs+ in multi-porous tailored grain size materials.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Colloid-facilitated transport of 238 Pu, 233 U and 137 Cs through fractured chalk: Laboratory experiments, modelling, and implications for nuclear waste disposal

The influence of montmorillonite colloids on the mobility of 238 Pu, 233 U and 137 Cs through a chalk fracture was investigated to assess the transport potential for radioactive waste. Radioisotopes of each element, along with the conservative tracer tritium, were injected in the presence and absence of montmorillonite colloids into a naturally fractured chalk core. In parallel, batch experiments were conducted to obtain experimental sorption coefficients (K d , mL/g) for both montmorillonite colloids and the chalk fracture material. Breakthrough curves were modelled to determine diffusivity and sorption of each radionuclide to the chalk and the colloids under advective conditions. Uranium sorbed sparingly to chalk (log K d = 0.7 ± 0.2) in batch sorption experiments. 233 U(VI) breakthrough was controlled primarily by the matrix diffusion and sorption to chalk (15 and 25% recovery with and without colloids, respectively). Cesium, in contrast, sorbed strongly to both the montmorillonite colloids and chalk (batch log K d = 3.2 ± 0.01 and 3.9 ± 0.01, respectively). The high affinity to chalk and low colloid concentrations overwhelmed any colloidal Cs transport, resulting in very low 137 Cs breakthrough (1.1–5.5% mass recovery). Batch and fracture transport results, and the associated modelling revealed that Pu migrates both as Pu (IV) sorbed to montmorillonite colloids and as dissolved Pu(V) (7% recovery). Transport experiments revealed differences in Pu(IV) and Pu(V) transport behavior that could not be quantified in simple batch experiments but are critical to effectively predict transport behavior of redox-sensitive radionuclides. Finally, a brackish groundwater solution was injected after completion of the fracture flow experiments and resulted in remobilization and recovery of 2.2% of the total sorbed radionuclides which remained in the core from previous experiments. In general, our study demonstrates consistency in sorption behavior between batch and advective fracture transport. Finally, the results suggest that colloid-facilitated radionuclide transport will enhance radionuclide migration in fractured chalk for those radionuclides with exceedingly high affinity for colloids.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2021

Two-Dimensional and Three-Dimensional Tetrel-Arsenide Frameworks Templated by Li and Cs Cations

Two new ternary tetrel pnictide phases, Li 1.08 Ge 4.92 As 7 and Cs 0.11 Zn 0.05 Si 0.95 As, have been synthesized. Both compounds crystallize in new structure types, which demonstrate the flexibility of Ge(Si)–As layers when accommodating electropositive cations of various sizes. Li 1.08 Ge 4.92 As 7 displays a Ge-As layer motif that has not been observed in ternary Ge-As systems, while Cs 0.11 Zn 0.05 Si 0.95 As exhibits a 3D framework composed of fragments of the 2D parent-phase SiAs. For Li 1.08 Ge 4.92 As 7 , a combination of computational modeling and solid-state 7 Li MAS NMR was used to establish the correct crystal structure with one mixed occupied Ge/Li site. The compositions of the phases were confirmed through energy-dispersive X-ray spectroscopy. Transport properties and UV–Vis spectroscopy reveal both reported compounds to be semiconductors. Cs 0.11 Zn 0.05 Si 0.95 As shows high thermal stability with congruent melting at 1300 K and an exceptionally low thermal conductivity of 0.5 W m –1 K –1 at 300 K. Temperature-dependent Li-ion hopping dynamics in Li 1.08 Ge 4.92 As 7 was characterized using 7 Li solid-state NMR.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Size-Dependent Onset of Nitric Acid Dissociation in Cs + ·(HNO 3 )(H 2 O) n =0–11 Clusters at 20 K

We report the water-mediated charge separation of nitric acid upon incorporation into size-selected Cs + ∙(HNO 3 )(H 2 O) n=0-11 clusters at 20 K. Dramatic spectral changes are observed in the range n=7-9 that are traced to the formation of many isomeric structures associated with intermediate transfer of the acidic proton to the water network. This transfer is complete by n=10, which exhibits much simpler vibrational band patterns consistent with those expected for a tri-coordinated hydronium ion (the Eigen motif) along with the NO stretching bands predicted for a hydrated NO 3 – anion that is directly complexed to the Cs + cation. Theoretical analysis of the n=10 spectrum indicates that the dissociated ions adopt a solvent-separated ion-pair configuration such that the Cs + and H 3 O + cations flank the NO 3 – anion in a microhydrated salt bridge. In conclusion, this charge separation motif is evidently assisted by the electrostatic stabilization of the product NO 3 – /H 3 O + ion pair by the proximal metal ion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Enhanced Neutron and γ-Ray Detection via 6 Li Substitution in Undoped and Tl-Doped Zero-Dimensional Perovskite Cs 3 Cu 2 I 5 Scintillators

Radiation detectors are crucial in a wide variety of research and commercial applications, such as oil and gas exploration, medical imaging, nuclear nonproliferation, and homeland security. Neutron and gamma-ray detectors are fundamental components in portal monitors at ports and border crossings, bolstering national security against radiological threats. This study presents a dual-mode scintillator, undoped and Tl-doped 6 Li-Cs 3 Cu 2 I 5 , and demonstrates its potential as a promising material for simultaneous thermal neutron and gamma-ray detection. We explore the Bridgman growth of both undoped and thallium doped Li → Cu and Li → Cs substitutional systems with various Li doping levels and assess their impact on scintillation properties. Under 662 keV gamma-ray excitation, the undoped crystals had light yields up to 35,900 ph/MeV, with energy resolutions down to 4.5%. The Tl-doped crystals performed better than the undoped crystals with light yields peaking at 65,900 ph/MeV and energy resolutions as low as 3.5%. When exposed to a moderated 252 Cf excitation source, our crystals had light yields between 102,900 and 167,200 photons per thermal neutron capture, with a full energy thermal neutron peak reaching 3 MeV in gamma equivalent energy. Pulse shape discrimination studies reveal well-separated gamma and neutron events, resulting in Figure-Of-Merit (FOM) as high as 3.7. Furthermore, these findings highlight the potential of Li-doped Cs 3 Cu 2 I 5 as a viable candidate for next-generation dual-mode scintillators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

FA x Cs 1–x PbI 3 Nanocrystals: Tuning Crystal Symmetry by A-Site Cation Composition

Nanoscale semiconductors show remarkably tunable properties. For metal halide perovskite (MHP) nanocrystals (NCs), surface energy and lattice strain stabilize desirable MHP compositions and crystallographic phases that are unstable in the bulk. We report an X-ray scattering study of the average room-temperature crystal structure of ~15 nm FA x Cs 1–x PbI 3 (FA = formamidinium) NCs. All compositions crystallize in the perovskite structure; however, the average structure lowers in symmetry from the a (cubic) to ß (tetragonal) to γ (orthorhombic) perovskite phases with decreasing x (Cs addition). The corresponding a- to ß- and ß- to γ-phase transitions occur between x = 0.75–0.5 and x = 0.25–0.1, respectively. Furthermore, structural refinements also indicate large octahedral tilt angles (10–30°) in the ß- and γ-phases and an increase in (pseudo)cubic unit cell volume upon FA addition. This work establishes the composition–structure relationship for FA x Cs 1–x PbI 3 NCs and demonstrates the ability to target average crystal symmetry with facile synthetic control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Colloidal AInSe 2 (A = K, Rb, Cs) Nanocrystals with Tunable Crystal and Band Structures

Wide band gap AInSe 2 (A = K, Rb, Cs) is an important interlayer material for improving the efficiency of Cu(In,Ga)(S,Se) 2 (CIGS) solar cells. Compared to high-vacuum deposition and solid-state synthesis, a less energyintensive method is of interest for its fabrication. Herein, we present the rapid, low-temperature colloidal synthesis of AInSe 2 nanocrystals that opens a pathway for convenient solution processing. The crystal structures and electronic band structures of the nanocrystals were studied, and their particle morphology was found to be dependent on the choice of alkali metal and selenium precursors. Homogeneous solid solution (K,Rb,Cs)InSe 2 nanocrystals were synthesized using a mixture of alkali metal precursors. Their compositions, lattice parameters, and band gaps were easily tuned based on the K:Rb:Cs precursor ratio, providing potential for interface engineering of CIGS nanocrystal-based solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Lead-Free Cs 4 CuSb 2 Cl 12 Layered Double Perovskite Nanocrystals

Concerns about the toxicity of lead-based perovskites have aroused great interest for the development of alternative lead-free perovskite-type materials. Recently, theoretical calculations predict that Pb 2+ cations can be substituted by a combination of Cu 2+ and Sb 3+ cations to form a vacancy-ordered layered double perovskite structure with superior optoelectronic properties. However, accessibilities to this class of perovskite-type materials remain inadequate, hindering their practical implementations in various applications. Here, we report the first colloidal synthesis of Cs 4 CuSb 2 Cl 12 perovskite-type nanocrystals (NCs). The resulting NCs exhibit a layered double perovskite structure with ordered vacancies and a direct bandgap of 1.79 eV. A composition-structure-property relationship has been established by investigating a series of Cs 4 Cu x Ag 2-2x Sb 2 Cl 12 perovskite-type NCs (0 ≤ x ≤ 1). The composition-induced crystal structure transformation, thus the electronic bandgap evolution has been explored by experimental observations and further confirmed by theoretical calculations. Taking advantages of both the unique electronic structure and solution processability, we demonstrate that the Cs 4 CuSb 2 Cl 12 NCs can be solution-processed as high-speed photodetectors with ultrafast photo-response and narrow bandwidth. We anticipate that our study will prompt future research to design and fabricate novel and high-performance lead-free perovskite-type NCs for a range of applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Impact of processing conditions on the film formation of lead-free halide double perovskite Cs 2 AgBiBr 6

Lead-free halide double perovskites with enhanced stability have gained attention as a promising environmentally friendly alternative to lead-based halide perovskites. Amongst different halide double perovskites, Cs 2 AgBiBr 6 has shown attractive optoelectronic properties and stability, making it a promising candidate for stable high-efficiency optoelectronic devices. Motivated by a data mining effort, we present here in this study the effects of different processing strategies on the microstructure and thin-film formation dynamics of Cs 2 AgBiBr 6 . We apply some of the most successfully used solvent engineering approaches from the halide perovskite research to halide double perovskites, namely antisolvent- and additive-assisted synthesis. Using in situ spectroscopy and diffraction, the film formation of Cs 2 AgBiBr 6 is investigated during spin coating, and the subsequent post-deposition thermal annealing. Dropping antisolvents during spin coating induces immediate supersaturation and crystallization of the wet film, whereas the time of dropping the antisolvent has implications on the film formation dynamics and the final microstructure. For additive (HBr)-assisted synthesis, we show how the addition of HBr affects colloid formation in solution and thus influences the crystallization pathway during thin-film processing. Finally, HBr additive simplifies synthesis in that it doesn't require solution and substrate preheating to obtain pinhole-free films even with higher thickness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High-throughput reaction discovery for Cs–Pb–Br nanocrystal synthesis

High-throughput reaction discovery is necessary to understand complex reaction spaces for inorganic nanocrystal synthesis. Here, we implemented a high-throughput continuous flow millifluidic reactor to perform reaction discovery for Cs–Pb–Br nanocrystal synthesis using a ligand assisted reprecipitation (LARP)-type approach. 3D-printed flow resistors enable the screening of up to 16 different mixing ratios within a single 90 s run, allowing for >270 different precursor concentration ratios to be quickly tested to explore the phase space that results in CsPbBr 3 , Cs 4 PbBr 6 , a biphasic mixture, or no product. To construct a full phase map from these high-throughput experiments, a neural network was trained and validated to predict the product composition (~500 000 points in precursor concentration space). The phase map predicts product composition/phase as a function of Cs–Pb–Br feed ratio. As a result, this approach demonstrates how high-throughput flow chemistry can be used in tandem with machine learning to rapidly explore nanocrystal reaction spaces in flow.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ultrasonication-assisted trace amount solvent synthesis of Cs 4 PbBr 6 crystal with ultra-bright green light emission

Cs 4 PbBr 6 crystals have been synthesized by an ultrasonication-assisted trace amount polar solvent method. The prepared green Cs 4 PbBr 6 material was found to have high photoluminescence (PL) brightness and 10 ns PL lifetime. The prepared green light emitting device can achieve the maximum brightness of 3.8 × 10 9 cd/m 2 , which is nearly 100 times higher than a wick. The white light emitting device based on Cs 4 PbBr 6 crystals has better performance than commercial products, which can cover 32.3% of the color gamut and achieves 107.3% coverage for International Commission on Illumination (CIE)1931 and 84.8% coverage for CIE1976.

36 MATERIALS SCIENCE↗