Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cross points”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Surface fitting three-dimensional bodies

The geometry of general three-dimensional bodies is generated from coordinates of points in several cross sections. Since these points may not be smooth, they are divided into segments and general conic sections are curve fit in a least-squares sense to each segment of a cross section. The conic sections are then blended in the longitudinal direction by fitting parametric cubic-spline curves through coordinate points which define the conic sections in the cross-sectional planes. Both the cross-sectional and longitudinal curves may be modified by specifying particular segments as straight lines and slopes at selected points. Slopes may be continuous or discontinuous and finite or infinite. After a satisfactory surface fit has been obtained, cards may be punched with the data necessary to form a geometry subroutine package for use in other computer programs. At any position on the body, coordinates, slopes and second partial derivatives are calculated. The method is applied to a blunted 70 deg delta wing, and it was found to generate the geometry very well.

Dejarnette, F. R.↗
NASA NTRS1975

Surface fitting three-dimensional bodies

The geometry of general three-dimensional bodies was generated from coordinates of points in several cross sections. Since these points may not be on smooth curves, they are divided into groups forming segments and general conic sections are curve fit in a least-squares sense to each segment of a cross section. The conic sections are then blended in the longitudinal direction through longitudinal curves. Both the cross-sectional and longitudinal curves may be modified by specifying particular segments as straight lines or specifying slopes at selected points. This method was used to surface fit a 70 deg slab delta wing and the HL-10 Lifting Body. The results for the delta wing were very close to the exact geometry. Although there is no exact solution for the lifting body, the surface fit generated a smooth surface with cross-sectional planes very close to prescribed coordinate points.

Dejarnette, F. R.↗
NASA NTRS1996

Isolating the foreground of the X-ray background

The foreground component of the X-ray background can be studied by cross-correlating its intensity with galaxy catalogs. The two-point cross-correlation function between 67 Einstein X-ray fields and the APM galaxy catalogs was computed. A signal with an amplitude of W(sub xg) = 0.04 +/- 0.01, significant at the 3.5 sigma level, was computed. The reality of this signal was tested. The way in which this signal can be used to constrain models of the X-ray background is discussed.

Refreigier, A.↗
DOE OSTI2022

Performance improvements of the windowed multipole formalism using a rational fraction approximation of the Faddeeva function

The windowed multipole (WMP) formalism was introduced as a way to calculate Doppler broadened cross sections on the fly during Monte Carlo simulations. While more arithmetic is needed compared to point-wise cross section look-ups, performance remained competitive from the large memory reductions and sequential data access. The single most expensive function call in a depleted fuel assembly problem using WMP comes from the evaluation of the Faddeeva function, which previously relied on a highly accurate, highly-branching algorithm. This paper explores the use of rational fraction approximations tailored to the domain interest of reactor physics applications and the development of lower accuracy approximations sufficient for our application. The rational approximations were implemented and tested in OpenMC on an infinite medium problem to stress the cross section calculation routine and a PWR assembly problem. In both cases, the rational approximation nearly eliminated the ∼ 20% penalty previously observed when comparing to point-wise libraries. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1977

The estimation of pointing angle and normalized surface scattering cross section from GEOS-3 radar altimeter measurements

The statistical error of the pointing angle estimation technique is determined as a function of the effective receiver signal to noise ratio. Other sources of error are addressed and evaluated with inadequate calibration being of major concern. The impact of pointing error on the computation of normalized surface scattering cross section (sigma) from radar and the waveform attitude induced altitude bias is considered and quantitative results are presented. Pointing angle and sigma processing algorithms are presented along with some initial data. The intensive mode clean vs. clutter AGC calibration problem is analytically resolved. The use clutter AGC data in the intensive mode is confirmed as the correct calibration set for the sigma computations.

Brown, G. S.↗
NASA NTRS1987

Shuttle computational grid generation

The well known Karman-Trefftz conformal transformation, consisting of repeated applications of the same basic formula, were found to be quite successful to body, wing, and wing-body cross sections. This grid generation technique is extended to cross sections of more complex forms, and also more automatic. Computer programs were written for the selection of hinge points on cross section with angular shapes, the Karman-Trefftz tranformation of arbitrary shapes, and the special transform of hinge point on the imaginary axis. A feasibility study is performed for the future application of conformal mapping grid generation to complex three dimensional configurations. Examples such as Orbiter vehicle section and a few others were used.

Ing, Chang↗
DOE OSTI2020

A Cross-correlation Study of High-energy Neutrinos and Tracers of Large-scale Structure

The origin of the bulk of the astrophysical neutrinos detected by the IceCube Observatory remains a mystery. Previous source-finding analyses compared the directions of IceCube events and individual sources in astrophysical catalogs. The source association method is technically challenging when the number of source candidates is much larger than the number of the observed astrophysical neutrinos. In this paper, we show that in this large source number regime, a two-point cross-correlation analysis of neutrino data and source catalog can instead be used to constrain potential source populations for the high-energy astrophysical neutrinos, and provide spatial evidence for the existence of astrophysical neutrinos. We present an analysis of the cross-correlation of the IceCube 2010–2012 point-source data and a WISE–2MASS galaxy sample. While we find no significant detection of cross-correlation with the publicly available neutrino data set, we show that, when applied to the full IceCube data, which has a longer observation time and higher astrophysical neutrino purity, our method has sufficient statistical power to detect a cross-correlation signal if the neutrino sources trace the large-scale structure of the universe.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1982

Development of a high stability pointing mechanism for wide application

A recurrent requirement of spaceborne instruments and communications equipment is that of accurate pointing. This need is recognizable in such diverse applications as Star Sensor trimming, Momentum Wheel gimballing, in-orbit adjustment or alignment of equipment, inter-satellite communication and Antenna Pointing. A pointing mechanism of novel design having several advantages over the more conventional gimbal, centre-pivoted, or cross axis pointing concepts is described.

Brunnen, A. J. D.↗
NASA NTRS1975

Quantization and symmetry in periodic coverage patterns with applications to earth observation

Analytical approaches based on an idealized physical model and concepts from number theory show that in periodic coverage patterns, uniquely defined by their revolution numbers R (orbital) and N (rotational), the subnodal points are earth-fixed, and they divide the equator into R equal segments of length s. The ascending subsatellite trace crosses each point once (only) each period. The descending subnodal points coincide with the ascending points if the integers N and R have like parity, and bisect the intervals between them if opposite. The interval between consecutive unidirectional crossings is Ns. Symmetries extend the equatorial results to all parallels of latitude. Complete periodic patterns of traces exhibit an overall symmetry, with trace intersections confined to discrete coordinate values which are quantized in longitude (basic s-unit) and symmetric in latitude.

King, J. C.↗
NASA NTRS2004

Circular Data Images for Directional Data

Directional data includes vectors, points on a unit sphere, axis orientation, angular direction, and circular or periodic data. The theoretical statistics for circular data (random points on a unit circle) or spherical data (random points on a unit sphere) are a recent development. An overview of existing graphical methods for the display of directional data is given. Cross-over occurs when periodic data are measured on a scale for the measurement of linear variables. For example, if angle is represented by a linear color gradient changing uniformly from dark blue at -180 degrees to bright red at +180 degrees, the color image will be discontinuous at +180 degrees and -180 degrees, which are the same location. The resultant color would depend on the direction of approach to the cross-over point. A new graphical method for imaging directional data is described, which affords high resolution without color discontinuity from "cross-over". It is called the circular data image. The circular data image uses a circular color scale in which colors repeat periodically. Some examples of the circular data image include direction of earth winds on a global scale, rocket motor internal flow, earth global magnetic field direction, and rocket motor nozzle vector direction vs. time.

Morpet, William J.↗
NASA NTRS1992

HIRIS - NASAS's High-Resolution Imaging Spectrometer for the Earth Observing System

Modern Earth science is beginning to examine interactions among the different terrestrial components at all temporal and spatial scales. Such a global perspective requires an integrated remote-sensing program, the Earth Observing System (EOS), which uses instruments throughout the electromagnetic spectrum to collect data about the Earth's surface, oceans and atmosphere over a range of selected scales. At the finest scales, we will require instruments capable of detailed sampling both spatially and spectrally. We have designed the High-Resoulution Imaging Spectrometer (HIRIS) to acquire simultaneous images in 192 spectral bands in the dominant wavelengths of the solar spectrum, 0.4 to 2.5 micrometers, at a spectral sampling interval of 10 nm. The ground instantaneous field of view (GIFOV) will be 30 m over a 24 km swath. A pointing capability will allow image acquisition up to +52 deg/-30 deg down track and +/-45 deg or more cross-track. Thus we will be able to study surface spectral bidirectional reflectance properties and variations in atmospheric attenuation with viewing angle. The cross-track pointing will also allow multiple viewing opportunities during one 16-day orbital revisit cycle, so that any part of the Earth may be imaged in a two-day period.

Dozier, J.↗
DOE OSTI2023

Ion-Selective Scattering Studied Using the Variable-Energy Electron Irradiation in the Ba 0.2 K 0.8 Fe 2 As 2 Superconductor

Low-temperature variable-energy electron irradiation was used to induce non-magnetic disorder in a single crystal of a hole-doped iron-based superconductor, Ba $1-x$ K $x$ Fe 2 As 2 , $x$ = 0.80. To avoid systematic errors, the beam energy was adjusted non-consequently for five values between 1.0 and 2.5 MeV when sample resistance was measured in situ at 22 K. For all energies, the resistivity raises linearly with the irradiation fluence suggesting the creation of uncorrelated dilute point-like disorder (confirmed by simulations). The rate of the resistivity increase peaks at energies below 1.5 MeV. Comparison with calculated partial cross-sections points to the predominant creation of defects in the iron sublattice. Simultaneously, superconducting $T_c$, measured separately between the irradiation runs, is monotonically suppressed as expected, since it depends on the total scattering rate, hence on the total cross-section, which is a monotonically increasing function of the energy. Our work experimentally confirms an often-made assumption of the dominant role of the iron sub-lattice in iron-based superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Exclusive π 0 p electroproduction off protons in the resonance region at photon virtualities 0.4 GeV 2 ≤ Q 2 ≤ 1 GeV 2

The limited electroproduction process e p → e ' p ' π 0 was measured in the range of photon virtualities Q 2 = 0.4 – 1.0 GeV 2 and the invariant mass range of the p π 0 system of W = 1.1 – 1.8 GeV. These kinematics are covered in exclusive π 0 electroproduction off the proton with nearly complete angular coverage in the p π 0 center-of-mass system and with high statistical accuracy. Nearly 36 000 cross-section points were measured, and the structure functions σ T + ε σ L , σ L T , and σ T T , were extracted via fitting the φ π 0 dependence of the cross section. A Legendre polynomial expansion analysis demonstrates the sensitivity of our data to high-lying N * and Δ * resonances with M > 1.6 GeV. As part of a broad effort to determine the electrocouplings of the N * and Δ * resonances using both single- and double-pion electroproduction, this dataset is key for the reliable extraction of the high-lying resonance electrocouplings from the combined isospin analysis of the N π and π + π - p channels.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2012

Critical Reflectance Derived from MODIS: Application for the Retrieval of Aerosol Absorption over Desert Regions

Aerosols are tiny suspended particles in the atmosphere that scatter and absorb sunlight. Smoke particles are aerosols, as are sea salt, particulate pollution and airborne dust. When you look down at the earth from space sometimes you can see vast palls of whitish smoke or brownish dust being transported by winds. The reason that you can see these aerosols is because they are reflecting incoming sunlight back to the view in space. The reason for the difference in color between the different types of aerosol is that the particles arc also absorbing sunlight at different wavelengths. Dust appears brownish or reddish because it absorbs light in the blue wavelengths and scatters more reddish light to space, Knowing how much light is scattered versus how much is absorbed, and knowin~ that as a function of wavelength is essential to being able to quantify the role aerosols play in the energy balance of the earth and in climate change. It is not easy measuring the absorption properties of aerosols when they are suspended in the atmosphere. People have been doing this one substance at a time in the laboratory, but substances mix when they are in the atmosphere and the net absorption effect of all the particles in a column of air is a goal of remote sensing that has not yet been completely successful. In this paper we use a technique based on observing the point at which aerosols change from brightening the surface beneath to darkening it. If aerosols brighten a surface. they must scatter more light to space. If they darken the surface. they must be absorbing more. That cross over point is called the critical reflectance and in this paper we show that critical reflectance is a monotonic function of the intrinsic absorption properties of the particles. This parameter we call the single scattering albedo. We apply the technique to MODIS imagery over the Sahara and Sahel regions to retrieve the single scattering albedo in seven wavelengths, compare these retrievals to ground-based retrievals from AERONET instruments and compute error bars on each retrieval. The results show that we can retrieve single scattering albedo for pure dust to within +/-0.02 and mixtures of dust and smoke to within +/-0.03. No other space based instrument has achieved a retrieval of single scattering albedo that spans the spectrum from 0.47 microns to 2.13 microns and produces regional maps of aerosol absorption showing gradients and changes. Applied in a more operational fashion, such information will narrow uncertainties in estimating aerosol forcing on climate.

Wells, Kelley C.↗
NASA NTRS2016

Optic Nerve Sheath Mechanics in VIIP Syndrome

Visual Impairment Intracranial Pressure (VIIP) syndrome is a major concern in current space medicine research. While the exact pathology of VIIP is not yet known, it is hypothesized that the microgravity-induced cephalad fluid shift increases intracranial pressure (ICP) and drives remodeling of the optic nerve sheath. To investigate this possibility, we are culturing optic nerve sheath dura mater samples under different pressures and investigating changes in tissue composition. To interpret results from this work, it is essential to first understand the biomechanical response of the optic nerve sheath dura mater to loading. Here, we investigated the effects of mechanical loading on the porcine optic nerve sheath.Porcine optic nerves (number: 6) were obtained immediately after death from a local abattoir. The optic nerve sheath (dura mater) was isolated from the optic nerve proper, leaving a hollow cylinder of connective tissue that was used for biomechanical characterization. We developed a custom mechanical testing system that allowed for unconfined lengthening, twisting, and circumferential distension of the dura mater during inflation and under fixed axial loading. To determine the effects of variations in ICP, the sample was inflated (0-60 millimeters Hg) and circumferential distension was simultaneously recorded. These tests were performed under variable axial loads (0.6 grams - 5.6 grams at increments of 1 gram) by attaching different weights to one end of the dura mater. Results and Conclusions: The samples demonstrated nonlinear behavior, similar to other soft connective tissue (Figure 1). Large increases in diameter were observed at lower transmural pressures (approximately 0 to 5 millimeters Hg), whereas only small diameter changes were observed at higher pressures. Particularly interesting was the existence of a cross-over point at a pressure of approximately 11 millimeters Hg. At this pressure, the same diameter is obtained for all axial loads applied to the tissue; i.e., as the axial load is varied, the diameter of the dura mater remains constant. This cross-over in the pressure-diameter curves occurred in all optic nerve sheaths that were tested, and may correspond with in vivo ICP levels for pigs. These data suggest that diameter of the dura mater of the optic nerve remains nearly constant in vivo despite being stretched axially. This may be a homeostatic mechanism aimed at maintaining target stresses/strains on the cells in the dura mater, and deviations from these stresses may play an important role in optic nerve sheath remodeling. Future studies will involve subjecting the dura mater to varying pressures and axial tensions for extended periods of time, while monitoring changes in the biomechanical properties. The data can then be used to study the effects of changes in ICP on the remodeling of the dura mater.

biomechanics↗
DOE OSTI2022

Current and Future γ-Ray Searches for Dark Matter Annihilation Beyond the Unitarity Limit

For decades, searches for electroweak-scale dark matter (DM) have been performed without a definitive detection. This lack of success may hint that DM searches have focused on the wrong mass range. A proposed candidate beyond the canonical parameter space is ultraheavy DM (UHDM). In this work, we consider indirect UHDM annihilation searches for masses between 30 TeV and 30 PeV—extending well beyond the unitarity limit at ~100 TeV—and discuss the basic requirements for DM models in this regime. We explore the feasibility of detecting the annihilation signature, and the expected reach for UHDM with current and future very-high-energy (VHE; >100 GeV) γ-ray observatories. Specifically, we focus on three reference instruments: two Imaging Atmospheric Cherenkov Telescope arrays, modeled on VERITAS and CTA-North, and one extended air shower array, motivated by HAWC. With reasonable assumptions on the instrument response functions and background rate, we find a set of UHDM parameters (mass and cross section) for which a γ-ray signature can be detected by the aforementioned observatories. Here, we further compute the expected upper limits for each experiment. With realistic exposure times, the three instruments can probe DM across a wide mass range. At the lower end, it can still have a point-like cross section, while at higher masses the DM could have a geometric cross section, indicative of compositeness.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Mechanisms and Impacts of Earth System Tipping Elements

Tipping elements are components of the Earth system which may respond nonlinearly to anthropogenic climate change by transitioning toward substantially different long-term states upon passing key thresholds or “tipping points.” In some cases, such changes could produce additional greenhouse gas emissions or radiative forcing that could compound global warming. Improved understanding of tipping elements is important for predicting future climate risks and their impacts. Here we review mechanisms, predictions, impacts, and knowledge gaps associated with 10 notable Earth system components proposed to be tipping elements. We evaluate which tipping elements are approaching critical thresholds and whether shifts may manifest rapidly or over longer timescales. Some tipping elements have a higher risk of crossing tipping points under middle-of-the-road emissions pathways and will possibly affect major ecosystems, climate patterns, and/or carbon cycling within the 21st century. However, literature assessing different emissions scenarios indicates a strong potential to reduce impacts associated with many tipping elements through climate change mitigation. The studies synthesized in our review suggest most tipping elements do not possess the potential for abrupt future change within years, and some proposed tipping elements may not exhibit tipping behavior, rather responding more predictably and directly to the magnitude of forcing. Nevertheless, uncertainties remain associated with many tipping elements, highlighting an acute need for further research and modeling to better constrain risks.

58 GEOSCIENCES↗