Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coupled cluster”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A Correlated Ab Initio Study of Linear Carbon-Chain Radicals C(sub n)H (n=2-7)

Linear carbon-chain radicals C(sub n) H for n = 2-7 have been studied with correlation consistent valence and core-valence basis sets and the coupled cluster method RCCSD(T). Equilibrium structures, rotational constants, and dipole moments are reported and compared with available experimental data. The ground state of the even-n series changes from 2Sigma(+) to 2Pi as the chain is extended. For C4H, the 2Sigma(+) state was found to lie only 72 cm(exp -1) below the 2Pi state in the estimated complete basis set limit for valence correlation. The C2H(-) and C3H(-) anions have also been characterized.

Woon, David E.↗

Accurate Quartic Force Fields and Vibrational Frequencies for HCN and HNC

The quartic force fields of HCN and HNC are determined using atomic natural orbital one-particle basis sets of spdf/spd and spdfg/spdf quality in conjunction with the CCSD(T) electron correlation method (singles and doubles coupled-cluster theory plus a perturbation estimate of the effects of connected triple excitations). The HCN force field is in good agreement with a recent experimentally derived force field and also with the force field recently computed by Wong and Bacskay. On the basis of the good agreement obtained for HCN, it is argued that the ab initio quartic force field for HNC is superior to a prior force field derived from experiment. The harmonic frequencies of HNC are predicted to be 3822 +/- 10, 472 +/- 5, and 2051 +/- 10 cm(exp -1) for omega(sub 1), omega(sub 2), and omega(sub 3), respectively; the experimentally derived values are above these values and fall outside the estimated uncertainties. Using the quartic force field, spectroscopic constants are predicted for HNC based on a vibrational second-order perturbation theory analysis. It is also asserted that the gas-phase fundamental nu(sub 3) for HNC is slightly lower than the matrix isolation value. The range of validity of the quartic force fields is investigated by comparison of variational vibrational energies computed with the quartic force fields to those obtained from our recently reported global HCN/HNC potential energy surface and also to experimental data.

Lee, Timothy J.↗

A Doubles Correction to Electronic Excited States from Configuration Interaction in the Space of Single Substitutions

A perturbative correction to the method of configuration interaction with single substitutions (CIS) is presented. This CIS(D) correction approximately introduces the effect of double substitutions which are absent in CIS excited states. CIS(D) is a second-order perturbation expansion of the coupled-cluster excited state method, restricted to single and double substitutions, in a series in which CIS is zeroth order, and the first-order correction vanishes. CIS (D) excitation energies are size consistent and the calculational complexity scales with the fifth power of molecular size, akin to second-order Moller-Plesset theory for the ground state. Calculations on singlet excited states of ethylene, formaldehyde, acetaldehyde, butadiene and benzene show that CIS (D) is a uniform improvement over CIS. CIS(D) appears to be a promising method for examining excited states of large molecules, where more accurate methods are not feasible.

Head-Gordon, Martin↗

Theoretical Study of the H2-ML(+) Binding Energies

The cooperative ligand effects are studied in MLH2(+) and the results are compared to the recent experiments of Kemper et al. The bonding in these compounds is principally electrostatic in origin; however, ligand to metal and metal to ligand donations are important, especially for H2. We show that differences arise among the vanadium, cobalt, and copper complexes which are due to 3d donation to H2. Electron correlation is required to describe the dative interaction, and we find that second order Moller-Plesset perturbation theory (MP2) yields a good description of these systems compared with higher levels of correlation (such as the modified coupled pair functional and coupled cluster approaches) and experiment. However, obtaining quantitative results requires higher levels of theory than MP2.

Maitre, Philippe↗

An Ab Initio Study of CuCO

Modified coupled-pair functional (MCPF) calculations and coupled cluster singles and doubles calculations, which include a perturbational estimate of the connected triples [CCSD(T)], yield a bent structure for CuCO, thus, supporting the prediction of a nonlinear structure based on density functional (DF) calculations. Our best estimate for the binding energy is 4.9 +/- 1.4 kcal/mol; this is in better agreement with experiment (6.0 +/- 1.2 kcal/mol) than the DF approach which yields a value (19.6 kcal/mol) significantly larger than experiment.

Bauschlicher, Charles W., Jr.↗

High Performance Distributed Computing in a Supercomputer Environment: Computational Services and Applications Issues

This tutorial proposes to be a practical guide for the uninitiated to the main topics and themes of high-performance computing (HPC), with particular emphasis to distributed computing. The intent is first to provide some guidance and directions in the rapidly increasing field of scientific computing using both massively parallel and traditional supercomputers. Because of their considerable potential computational power, loosely or tightly coupled clusters of workstations are increasingly considered as a third alternative to both the more conventional supercomputers based on a small number of powerful vector processors, as well as high massively parallel processors. Even though many research issues concerning the effective use of workstation clusters and their integration into a large scale production facility are still unresolved, such clusters are already used for production computing. In this tutorial we will utilize the unique experience made at the NAS facility at NASA Ames Research Center. Over the last five years at NAS massively parallel supercomputers such as the Connection Machines CM-2 and CM-5 from Thinking Machines Corporation and the iPSC/860 (Touchstone Gamma Machine) and Paragon Machines from Intel were used in a production supercomputer center alongside with traditional vector supercomputers such as the Cray Y-MP and C90.

Kramer, Williams T. C.↗

On the Interaction of CO and NH3 with BH3 and BF3

BH3CO, BF3CO, BH3NH3, and BF3NH3 have been studied using density functional theory (DFT). The computed geometries are in reasonable agreement with experiment. BF3CO is found to be weakly bound. The binding energies of BH3CO, BH3NH3 , and BF3NH3 have also been computed using the coupled cluster singles and doubles level of theory, including a perturbational estimate of the connected triples [CCSD(T)]. These CCSD(T) calculations are performed using correlation consistent polarized-valence triple-zeta basis sets. These are expected to be the most accurate binding energies to date. The DFT binding energies are in good agreement with those obtained at the CCSD(T) level. The bonding is analyzed using the constrained space orbital variation (CSOV) technique. In addition to analyzing the bonding in BH3CO, BH3NH3, and BF3NH3, the CSOV approach is used to study why the bonding in BF3CO is so weak.

Bauschlicher, Charles W., Jr.↗

Electron Correlation in 4-Component Relativistic Calculations

The full 4-component Dirac-Coulomb equation can nowadays be used in molecular calculations, The first step in solving this relativistic many-electron equation usually consists of solving the closed or open-shell Diarc-Fock equations. Like in non-relativistic calculations the outcome does not account for the effects of electron correlation. This can in principle be remedied by developing relativistic variants of electron correlation methods like Configuration Interaction or Coupled Cluster. In this talk the differences and similarities of such relativistic approaches as compared to non-relativistic methods will be reviewed. Results of Configuration Interaction calculations on the PtH molecule and on the MeF(sub 6, sup 2-) (Me= Co, Rh, Ir) complexes will be presented to give an impression of the kind of results that currently can be obtained.

Visscher, Luuk↗

The Molecular Structure of cis-FONO

The molecular structure of cis-FONO has been determined with the CCSD(T) correlation method using an spdf quality basis set. In agreement with previous coupled-cluster calculations but in disagreement with density functional theory, cis-FONO is found to exhibit normal bond distances. The quadratic and cubic force fields of cis-FONO have also been determined in order to evaluate the effect of vibrational averaging on the molecular geometry. Vibrational averaging is found to increase bond distances, as expected, but it does not affect the qualitative nature of the bonding. The CCSD(T)/spdf harmonic frequencies of cis-FONO support our previous assertion that a band observed at 1200 /cm is a combination band (upsilon(sub 3) + upsilon(sub 4)), and not a fundamental.

Lee, Timothy J.↗

The G2(B3LYP/MP2/CC) Approach: A Modification of the G2(MP2) Approach and a Comparison with B3LYP Results

The quadratic configuration interaction calculation in the G2(MP2) approach is replaced by a coupled-cluster singles and doubles calculation including a perturbational estimate of the triples excitations. In addition, the SCF and MP2 geometry optimizations and SCF frequency calculation in the G2(MP2) approach are replaced by a B3LYP geometry optimization and frequency calculation in the proposed G2(B3LYP/MP2/CC) approach. This simplification does not affect the average absolute deviation from experiment, but decreases the maximum error compared with the G2(MP2) approach. The G2(B3LYP/MP2/CC) results are compared with those obtained using the B3LYP approach, and the G2(B3LYP/MP2/CC) model is found to be more reliable, even if the B3LYP calculations are performed using a large basis set.

Bauschlicher, Charles W., Jr.↗

The Sensitivity of B3LYP Atomization Energies to the Basis Set and a Comparison of the Basis Set Requirements for CCSD(T) and B3LYP

The atomization energies of the 55 G2 molecules are computed using the B3LYP approach with a variety of basis sets. The 6-311 + G(3df) basis set is found to yield superior results to those obtained using the augmented - correlation - consistent valence-polarized triple-zeta set. The atomization energy of SO2 is found to be the most sensitive to basis set and is studied in detail. Including tight d functions is found to be important for obtaining good atomization energies. The results for SO2 are compared with those obtained using the coupled-cluster singles and doubles approach including a perturbational estimate of the triple excitations.

Bauschlicher, Charles W., Jr.↗

Ab Initio Studies of Fluorine and Chlorine Oxide and Nitrogen Oxide Species of Interest in Stratospheric Chemistry

The quality of fundamental vibrational frequencies determined using the CCSD(T) method (singles and doubles coupled-cluster theory plus a perturbational estimate of the effects of connected triple excitations) is shown to be very good, usually predicting band centers to within plus or minus 8 per centimeter. This approach is applied to several molecules of interest in atmospheric chemistry, such as HNO, cis-FONO, cis-ClONO, and ClOOH. The HNO molecule displays a large and unusual anharmonicity in the H-N stretch. For the calculation of ultraviolet (UV) spectra, the linear response CCSD (LRCCSD) approach (which is equivalent to EOM-CCSD) has been shown to yield vertical excitation energies that are accurate to approximately equal to 0.1 eV for singly excited electronic states. This method together with more approximate methods is used to examine the UV spectra of several molecules important in stratospheric chemistry, including HOCl, Cl2O, ClONO2, HONO2, ClOOCl, ClOOH, and HOOH.

Lee, Timothy J.↗

The Ozonide Anion: A Theoretical Study

Complete active space self-consistent field (CASSCF) and CASSCF second order perturbation theory (CASPT2) methods have been used for the geometry optimization and calculation of harmonic and fundamental frequencies of the ozonide ion O3(-) and the ozonide lithium complex Li(+)O3(-). For O3(-) harmonic frequencies have also been obtained using the coupled-cluster method, CCSD(T). Infrared intensities are computed from dipole moment derivatives at the CASSCF level. The predicted equilibrium geometry for O3(-) is: Roo = 1.361 Angstroms and angle ooo = 115.4 degrees, and the fundamental frequencies are: nu(sub 1) = 989 per centimeter, nu(sub 2) 556 per centimeter, nu(sub 3) = 870 per centimeter (experimental values are: Roo =1.36 plus or minus 0.02 Angstroms, angle (ooo) = 111.8 plus or minus 2.0 degrees, nu(sub 1) = 975(50) per centimeter, nu(sub 2) = 550(50) per centimeter, nu(sub 3) = 880(50) per centimeter). Corresponding data for the lithium ozonide complex have also been obtained. The presented data contradict the previous interpretation of the IR and Raman spectrum obtained after deposition of ozone in N2, argon, or neon matrices with atomic beams of alkali metals. The presence of the lithium cation raises the asymmetric stretch frequency to about 940 per centimeter, which is contradictory to assumptions made in the assignments of the matrix spectra. Calculations made in a dielectric medium strongly suggest that the effect of the matrix on the IR spectrum is small for O3(-) itself. The dissociation and atomization energies of O3(-) are found to be in agreement with experiment.

Borowski, Poitr↗

Using Density Functional Theory (DFT) for the Calculation of Atomization Energies

The calculation of atomization energies using density functional theory (DFT), using the B3LYP hybrid functional, is reported. The sensitivity of the atomization energy to basis set is studied and compared with the coupled cluster singles and doubles approach with a perturbational estimate of the triples (CCSD(T)). Merging the B3LYP results with the G2(MP2) approach is also considered. It is found that replacing the geometry optimization and calculation of the zero-point energy by the analogous quantities computed using the B3LYP approach reduces the maximum error in the G2(MP2) approach. In addition to the 55 G2 atomization energies, some results for transition metal containing systems will also be presented.

Bauschlicher, Charles W., Jr.↗

On the Reaction of FNO2 with CH3, t-butyl, and C13H21

Theoretical studies are reported for the reaction of FN02 with the radicals CH3, t-butyl, and C13H21, which are templates for the radical site of a hydrogenated diamond surface. All structures axe fully optimized using density functional theory (DFT) based on the B3LYP functional. Calibration calculations axe performed for CH3 + FNO2 using the coupled cluster approach, the the internally contracted multireference configuration. interaction method, and second order perturbation theory based upon complete active space SCF (CASSCF) reference wave function. These calibration calculations support the B3LYP approach for the calculation of bond energies, but show the B3LYP barrier is too low. Combining the calibration calculations with the larger clusters yields our best estimate of a barrier of about 10 kcal/mol. for the reaction of FNO2 with a radical site on hydrogenated diamond.

Thuemmel, H. T.↗

The Structure of Li7 and K7

The self-consistent-field (SCF) approach and density functional theory, using the B3LYP hybrid functional, yield three low-lying structures for Li7(-). The relative separations differ for the SCF and B3LYP approaches, however the B3LYP results are in good agreement with the coupled cluster results. For K7(-), only an octahedron with one face capped is found to be a minimum; this the second most stable structure for Li7(-). A comparison of the computed separations between the low-lying states of K7 and the photoelectron detachment spectra does not allow an unambiguous assignment of the structure of K7(-).

Bauschlicher. Charles W., Jr.↗

The Dissociation Energies of AlH2 and AlAr

The D(sub 0) values for AlH2 and AlAr are computed using the coupled cluster approach in conjunction with large basis sets. Basis set superposition and spin-orbit effects are accounted for as they are sizeable due to the small binding energy. The computed dissociation energy for AlAr is 101 /cm , which is 83% of the experimental value (122.4/ cm). Our best estimate for the H2 binding energy in AlH2 is 40 +/- 28 /cm.

Ricca, Alessandra↗

Application of Density Functional Theory to Systems Containing Metal Atoms

The accuracy of density functional theory (DFT) for problems involving metal atoms is considered. The DFT results are compared with experiment as well as results obtained using the coupled cluster approach. The comparisons include geometries, frequencies, and bond energies. The systems considered include MO2, M(OH)+(sub n), MNO+, and MCO+(sub 2). The DFT works well for frequencies and geometries, even in cases with symmetry breaking; however, some examples have been found where the symmetry breaking is quite severe and the DFT methods do not work well. The calculation of bond energies is more difficult and examples of the successes as well as failures of DFT will be given.

Bauschlicher, Charles W., Jr.↗