Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Convergent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Surface wind convergence as a short-term predictor of cloud-to-ground lightning at Kennedy Space Center

Cloud-to-ground lightning is a significant forecast problem at the Kennedy Space Center (KSC) in Florida. In this study, cloud-to-ground lightning is related in time and space to surface convergence for 244 days during the convective seasons of 1985 and 1986 over a 790 sq-km network at KSC. The method uses surface convergence, particularly the average over the area, to identify the potential for new, local thunderstorm growth, and it can be used to specify the likely time and location of lightning during the life cycle of the convection. A threshold of 75 x 10 to the -6th/s change in divergence is the main criterion used to define a convergence event, and a set of flashes less than 30 min apart defines a lightning event. Time intervals are found from the study to be approximately 1 h from beginning convergence to first flash, and another hour to the end of lightning. The influences of low-level winds and midlevel moisture in determining the location and intensity of convection are discussed. This is the first known dynamically-based forecast method for lightning prediction. The technique, currently in use at KSC, has been shown to be a systematic, quantitative tool for predicting lightning onset in situations where conventional analysis tools such as radar and satellite are limited.

Watson, Andrew I.↗

Mantle downwelling and crustal convergence - A model for Ishtar Terra, Venus

Models of viscous crustal flow driven by gradients in topography are presented in order to explore quantitatively the implications of the hypothesis that Ishtar is a crustal convergence zone overlying a downwelling mantle. Assuming a free-slip surface boundary condition, it is found that, if the crustal convergence hypothesis is correct, then the crustal thickness in the plains surrounding Ishtar can be no more than about 25 km thick. If the geothermal gradient is larger or the rheology is weaker, the crust must be even thinner for net crustal convergence to be possible. This upper bound is in good agreement with the several independent estimates of crustal thickness of 15-30 km in the plains of Venus based on modeling of the spacing of tectonic features and of impact crater relaxation. Although Ishtar is treated as a crustal convergence zone, this crustal flow model shows that under some circumstances, near-surface material may actually flow away from Ishtar, providing a possible explanation for the grabenlike structures in Fortuna Tessera.

Kiefer, Walter S.↗

The effect of grid aspect ratio on convergence

Vector stability theory and computational experiments are used to examine the effects of high aspect ratio grids on algorithm convergence. Emphasis is placed on identifying the degree of convergence deterioration that ADI schemes experience as grid aspect ratio increases and on deriving methods for circumventing this problem. Approximately factored implicit schemes are found to experience convergence deterioration because of nonoptimum local time stepping procedures and the increased need for viscous preconditioning. An enhanced algorithm is devised on the basis of improved selection of the local time step, appropriate definition of viscous preconditioning matrix, and proper implementation of boundary conditions. The novel algorithm provides uniformly efficient convergence at all aspect ratios for both Euler and Navier-Stokes computations for a variety of test problems.

Buelow, P. E. O.↗

Preferred latitudes of the intertropical convergence zone

The latitude preference of the intertropical convergence zone (ITCZ) is examined on the basis of observations, theory, and a modeling analysis. Observations show that convection is enhanced at latitudes of about 4 deg to 10 deg relative to the equator, even in regions where the sea surface temperature (SST) is maximum on the equator. Both linear shallow-water theory and a moist primitive equation model suggest a new explanation for the off-equatorial latitude preference of the ITCZ that requires neither the existence of zonally propagating disturbances nor an off-equatorial maximum in SST. The shallow-water theory indicates that a finite-width, zonally oriented, midtropospheric heat source (i.e., an ITCZ) produces the greatest local low-level convergence when placed a finite distance away from the equator. This result suggests that an ITCZ is most likely to be supported via low-level convergence of moist energy when located at these "preferred" latitudes away from the equator. For a plausible range of heating widths and damping parameters, the theoretically predicted latitude is approximately equal to the observed position (s) of the ITCZ (s). Analysis with an axially symmetric, moist, primitive equation model indicates that when the latent heating field is allowed to be determined internally, a positive feedback develops between the midtropospheric latent heating and the low-level convergence, with the effect of enhancing the organization of convection at latitudes of about 4 deg to 12 deg. Numerical experiments show that (1) two peaks in convective precipitation develop straddling the equator when the SST maximum is located on the equator; (2) steady ITCZ-like structures form only when the SST maximum is located away from the equator; and (3) peaks in convection can develop away from the maximum in SST, with a particular preference for latitudes of about 4 deg to 12 deg, even in the ('cold') hemisphere without the SST maximum. The relationship between this mechanism and earlier theories is discussed, as are implications for the coupled ocean-atmosphere system and the roles played by midlevel latent heating and SST gradients in forcing the low-level atmospheric circulation in the tropics.

Waliser, Duane E.↗

Idealized Simulations of the Effects of Amazon Convection and Baroclinic Waves on the South Atlantic Convergence Zone

The South Atlantic Convergence Zone (SACZ) is a NW-SE oriented, stationary region of enhanced convergence and convection that extends southeastward from the ITCZ convection anchored over the Amazon region. On daily satellite images each SACZ episode is seen as a progression of one or several midlatitude cold fronts that intrude into the subtropics and tropics, becoming stationary over southeastern Brazil for a few days. Previous studies have shown that while Amazon convection plays a fundamental role in the formation of the SACZ, Atlantic sea surface temperatures and the Andes Mountains play a relatively minor role in the strength and location of the SACZ. The role of interactions between Amazon convection and midlatitude baroclinic waves in establishing the origin, position, and maintenance of the SACZ is studied here using idealized dry, multilayer global model simulations that do not include the effects of topography. The model simulations produce SACZ-like regions of low-level convergence in the presence of Amazon convection embedded in a mean-flow that contains propagating baroclinic waves. The results of these simulations indicate that Amazon convection plays two fundamental roles in the formation and location of the SACZ. First, it produces a NW-SE oriented region of low-level convergence to the SE of Amazon convection. Second, it produces a storm-track region and accompanying stronger midlatitude baroclinic waves in the region of the SACZ. It is suggested that in the presence of moist effects, the 'seedling' SACZ regions produced in these simulations can be enhanced to produce the observed SACZ.

Ferreira, Rosana Nieto↗

Binocular Convergence and Errors in Judged Distance While Using Head-mounted See-through Displays

Previous observations have shown that optical superposition of a physical backdrops at the judged depth of a stereoscopic virtual image moves the judged depth closer to the observer. This effect was more pronounced for slowly moving physical backdrops and was not enhanced when the virtual image was rendered as a flat shaded solid object rather than a open wire-frame. Since this change in rendering making the virtual image more completely occlude the backdrop did not effect its judged depth and since the motion of the backdrop which would have attracted visual attention and binocular convergence did Increase its perceptual displacement, it was concluded that the change In Judged depth was not due to the perceived occlusion. Rather it was concluded to be due to an increase in binocular convergence. An experimental test of this hypothesis using a unobtrusive nonius technique to detect absolute and relative convergence has confirmed the presence of convergence correlated with the magnitude of the change in judged position of this virtual Image. The practical implications of this cause are demonstrated by a second study using monocular, biocular and stereoscopic viewing conditions and the consequences for the design of head-mounted see-through displays for near work are discussed.

Ellis, Stephen R.↗

On the Numerical Convergence to Steady State of Hypersonic Flows Over Bodies with Concavities

Two recent numerical studies of hypersonic flows over bodies with concavities revealed problems with convergence to a steady state with an oft-used application of local-time-stepping. Both simulated flows showed a time-like, periodic shedding of vortices in a subsonic domain bounded by supersonic external flow although the simulations, using local-time-stepping, were not time accurate. Simple modifications to the numerical algorithm were implemented to enable implicit, first-order accurate in time simulations. Subsequent time-accurate simulations of the two test problems converged to a steady state. The baseline algorithm and modifications for temporal accuracy are described. The requirement for sub-iterations to achieve convergence is demonstrated. Failure to achieve convergence without time accuracy is conjectured to arise from temporal errors being continuously refocused into a subsonic domain.

Gnoffo, Peter A.↗

Experimental and Computational Investigation of Multiple Injection Ports in a Convergent-Divergent Nozzle for Fluidic Thrust Vectoring

A computational and experimental study was conducted to investigate the effects of multiple injection ports in a two-dimensional, convergent-divergent nozzle, for fluidic thrust vectoring. The concept of multiple injection ports was conceived to enhance the thrust vectoring capability of a convergent-divergent nozzle over that of a single injection port without increasing the secondary mass flow rate requirements. The experimental study was conducted at static conditions in the Jet Exit Test Facility of the 16-Foot Transonic Tunnel Complex at NASA Langley Research Center. Internal nozzle performance was obtained at nozzle pressure ratios up to 10 with secondary nozzle pressure ratios up to 1 for five configurations. The computational study was conducted using the Reynolds Averaged Navier-Stokes computational fluid dynamics code PAB3D with two-equation turbulence closure and linear Reynolds stress modeling. Internal nozzle performance was predicted for nozzle pressure ratios up to 10 with a secondary nozzle pressure ratio of 0.7 for two configurations. Results from the experimental study indicate a benefit to multiple injection ports in a convergent-divergent nozzle. In general, increasing the number of injection ports from one to two increased the pitch thrust vectoring capability without any thrust performance penalties at nozzle pressure ratios less than 4 with high secondary pressure ratios. Results from the computational study are in excellent agreement with experimental results and validates PAB3D as a tool for predicting internal nozzle performance of a two dimensional, convergent-divergent nozzle with multiple injection ports.

Waithe, Kenrick A.↗

Experimental and Computational Investigation of Multiple Injection Ports in a Convergent-Divergent Nozzle for Fluidic Thrust Vectoring

A computational and experimental study was conducted to investigate the effects of multiple injection ports in a two-dimensional, convergent-divergent nozzle, for fluidic thrust vectoring. The concept of multiple injection ports was conceived to enhance the thrust vectoring capability of a convergent-divergent nozzle over that of a single injection port without increasing the secondary mass flow rate requirements. The experimental study was conducted at static conditions in the Jet Exit Test Facility of the 16-Foot Transonic Tunnel Complex at NASA Langley Research Center. Internal nozzle performance was obtained at nozzle pressure ratios up to 10 with secondary nozzle pressure ratios up to 1 for five configurations. The computational study was conducted using the Reynolds Averaged Navier-Stokes computational fluid dynamics code PAB3D with two-equation turbulence closure and linear Reynolds stress modeling. Internal nozzle performance was predicted for nozzle pressure ratios up to 10 with a secondary nozzle pressure ratio of 0.7 for two configurations. Results from the experimental study indicate a benefit to multiple injection ports in a convergent-divergent nozzle. In general, increasing the number of injection ports from one to two increased the pitch thrust vectoring capability without any thrust performance penalties at nozzle pressure ratios less than 4 with high secondary pressure ratios. Results from the computational study are in excellent agreement with experimental results and validates PAB3D as a tool for predicting internal nozzle performance of a two dimensional, convergent-divergent nozzle with multiple injection ports.

Waithe, Kenrick A.↗

Vestibular convergence patterns in vestibular nuclei neurons of alert primates

Sensory signal convergence is a fundamental and important aspect of brain function. Such convergence may often involve complex multidimensional interactions as those proposed for the processing of otolith and semicircular canal (SCC) information for the detection of translational head movements and the effective discrimination from physically congruent gravity signals. In the present study, we have examined the responses of primate rostral vestibular nuclei (VN) neurons that do not exhibit any eye movement-related activity using 0.5-Hz translational and three-dimensional (3D) rotational motion. Three distinct neural populations were identified. Approximately one-fourth of the cells exclusively encoded rotational movements (canal-only neurons) and were unresponsive to translation. The canal-only central neurons encoded head rotation in SCC coordinates, exhibited little orthogonal canal convergence, and were characterized with significantly higher sensitivities to rotation as compared to primary SCC afferents. Another fourth of the neurons modulated their firing rates during translation (otolith-only cells). During rotations, these neurons only responded when the axis of rotation was earth-horizontal and the head was changing orientation relative to gravity. The remaining one-half of VN neurons were sensitive to both rotations and translations (otolith + canal neurons). Unlike primary otolith afferents, however, central neurons often exhibited significant spatiotemporal (noncosine) tuning properties and a wide variety of response dynamics to translation. To characterize the pattern of SCC inputs to otolith + canal neurons, their rotational maximum sensitivity vectors were computed using exclusively responses during earth-vertical axis rotations (EVA). Maximum sensitivity vectors were distributed throughout the 3D space, suggesting strong convergence from multiple SCCs. These neurons were also tested with earth-horizontal axis rotations (EHA), which would activate both vertical canals and otolith organs. However, the recorded responses could not be predicted from a linear combination of EVA rotational and translational responses. In contrast, one-third of the neurons responded similarly during EVA and EHA rotations, although a significant response modulation was present during translation. Thus this subpopulation of otolith + canal cells, which included neurons with either high- or low-pass dynamics to translation, appear to selectively ignore the component of otolith-selective activation that is due to changes in the orientation of the head relative to gravity. Thus contrary to primary otolith afferents and otolith-only central neurons that respond equivalently to tilts relative to gravity and translational movements, approximately one-third of the otolith + canal cells seem to encode a true estimate of the translational component of the imposed passive head and body movement.

Non-NASA Center↗

Super-convergence of Discontinuous Galerkin Method Applied to the Navier-Stokes Equations

The practical benefits of the hyper-accuracy properties of the discontinuous Galerkin method are examined. In particular, we demonstrate that some flow attributes exhibit super-convergence even in the absence of any post-processing technique. Theoretical analysis suggest that flow features that are dominated by global propagation speeds and decay or growth rates should be super-convergent. Several discrete forms of the discontinuous Galerkin method are applied to the simulation of unsteady viscous flow over a two-dimensional cylinder. Convergence of the period of the naturally occurring oscillation is examined and shown to converge at 2p+1, where p is the polynomial degree of the discontinuous Galerkin basis. Comparisons are made between the different discretizations and with theoretical analysis.

Atkins, Harold L.↗

Converging Supergranular Flows and the Formation of Coronal Plumes

Earlier studies have suggested that coronal plumes are energized by magnetic reconnection between unipolar flux concentrations and nearby bipoles, even though magnetograms sometimes show very little minority-polarity flux near the footpoints of plumes. Here we use high-resolution extreme-ultraviolet (EUV) images and magnetograms from the Solar Dynamics Observatory (SDO) to clarify the relationship between plume emission and the underlying photospheric field. We find that plumes form where unipolar network elements inside coronal holes converge to form dense clumps, and fade as the clumps disperse again. The converging flows also carry internetwork fields of both polarities. Although the minority-polarity flux is sometimes barely visible in the magnetograms, the corresponding EUV images almost invariably show loop-like features in the core of the plumes, with the fine structure changing on timescales of minutes or less. We conclude that the SDO observations are consistent with a model in which plume emission originates from interchange reconnection in converging flows, with the plume lifetime being determined by the approximately 1-day evolutionary timescale of the supergranular network. Furthermore, the presence of large EUV bright points and/or ephemeral regions is not a necessary precondition for the formation of plumes, which can be energized even by the weak, mixed-polarity internetwork fields swept up by converging flows.

Sun: corona↗

Fundamental Improvement of a Convergence Test for Iterative Strain-Gage Balance Load Predictions

A fundamental improvement of a convergence test for wind tunnel strain-gage balance load iterations was developed. The improvement became necessary because incorrect test results were obtained whenever the original test was applied to multi-component balances with large load capacity differences. The original test was first published in NASA TN D-6860. It uses an upper bound of the Lipschitz constant to assess convergence characteristics of balance load predictions whenever the Iterative Method is applied. The Lipschitz constant is a function of the partial derivatives of each balance load component with respect to all other load components. Unfortunately, the original definition of the convergence test overlooked the fact that the Lipschitz constant is a dimensionless quantity and that the partial derivative of one load component with respect to another load component is not always dimensionless. Therefore, an improvement of the original test was successfully developed that uses load capacities to make all inputs for the calculation of the Lipschitz constant dimensionless before use. Results from the calibration data analysis of a six-component force balance and a five-component semi-span balance are used to illustrate the application of the improved load iteration convergence test.

Strain-Gage Balance↗

Converging towards atomic and nuclear pressures (Final Report)

his report details the development of transformational tools and techniques, allowing the accurate characterization of matter at the most extreme conditions yet studied in the high energy density (HED) domain. Before this work, most experiments quantitatively mapping the nature of matter in the HED realm were performed using planar geometry, which allows for the isolation and measurement of variables in a single thermodynamic state. Such measurements include equation of state variables, optical conductivity, heat transport and more. However, due to a variety of plasma processes, such experiments are limited to below ~10 TPa (100 Mbar) pressures. To achieve higher pressures, convergent experiments are needed. Historically, convergent experiments have not been used for benchmark data because they are integral measurements. That is each part of a convergent target undergoes a time dependent wide range of states, making it difficult to accurately isolate any particular quantity for a given thermodynamic state. This effort developed innovative convergent HED platforms and techniques enabling the exploration of matter from atomic to nuclear scale pressures. This effort also performed pioneering experiments that yielded the first rigorous benchmark data at these extreme conditions. This funding award began with the overarching goal to understand the behavior of matter at extreme (atomic-to-nuclear scale) pressures. The motivation for these goals lie in the fact that every time scientists explore matter beyond the threshold of an atomic unit, there is a fundamental shift in science. The atomic unit for energy, mass, charge, length, and time have each been explored, and each time such a threshold was crossed, a new sequence of discoveries was made resulting in significant awards such as the Nobel Prize. The only unexplored atomic unit is pressure, and this effort set the course for exploring matter at and beyond such pressures. That most of the recently discovered extrasolar planets and stars, as well as matter in the late implosion stages of inertial fusion targets, have deep internal pressures at and beyond atomic pressures amplifies the importance of this effort. Much of the initial work in developing techniques to create these atomic-to-nuclear pressures already existed within the HED community, predominantly at large scale laser facilities such as the National Ignition Facility (NIF) and the Omega60 laser the University of Rochester and although these experiments were routinely performed the ability to extract information about the underlying physical states and processes remained elusive due to the complexity of the experiments, extreme scales in both time and space, and the integrated nature of all the measurements. This work built a rigorous framework so such measurements can routinely be made. This was done in part through the introduction of Bayesian inference techniques into the field of HED science. These techniques allow for the self-consistent extraction of the relevant variables and their explicit and implicit correlations, so as to make use of integrated experimental data to constrain physical models and provide accurate uncertainty bounds for the data. The techniques developed here are fully transparent and proved immediately useful providing quantitative rigorous benchmarks for physical states and processes at some of the most extreme conditions yet explored on Earth. This funding is directly or partly responsible for 7 publications in major peer-reviewed scientific journals, a doctoral thesis, 3 invited talks at major conferences, and the training of a post-doc, 2 graduate students, and 1 undergraduate student. Beyond the effort supported by this award launched the introduction of Bayesian inference into the HED physics community and helped push the usage if modern data-science techniques within the physics community at large.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Local convergence analysis of an inexact trust-region method for nonsmooth optimization

In Baraldi, we introduced an inexact trust-region algorithm for minimizing the sum of a smooth nonconvex function and a nonsmooth convex function in Hilbert space—a class of problems that is ubiquitous in data science, learning, optimal control, and inverse problems. Furthermore, this algorithm has demonstrated excellent performance and scalability with problem size. In this paper, we enrich the convergence analysis for this algorithm, proving strong convergence of the iterates with guaranteed rates. In particular, we demonstrate that the trust-region algorithm recovers superlinear, even quadratic, convergence rates when using a second-order Taylor approximation of the smooth objective function term.

97 MATHEMATICS AND COMPUTING↗

Nonlinear convergence in contact mechanics: Immersed boundary finite volume

In this report we present an immersed boundary finite volume (IBM) method for simulating quasistatic contact mechanics of linearly elastic domains at small strains. In IBM, all external boundaries and internal contacts of an object are represented by embedded surfaces inside a Cartesian mesh, which need not conform to the grid lines. The contact constraints consist of the non-penetrability condition and Coulomb’s friction law, which are discretized using special interpolation stencils and enforced via penalty parameters. The resulting nonlinear system depends on displacement unknowns only. To solve it, we use the Newton method but find that it diverges frequently. To understand the divergence pattern, we analyze a simplified 2-cell problem and show that the global convergence of Newton cannot be ensured for any choice of penalty parameters. We thus propose a modified Newton solver, which guarantees convergence for the 2-cell problem and is numerically verified to converge for all the challenging simulations considered herein. While both 1 st - and 2 nd -order variants of IBM, in displacement unknowns, are proposed, the modified Newton solver applies only to the 1 st -order variant.

42 ENGINEERING↗

Convergence in nonlinear laser wakefield accelerators modeling in a Lorentz-boosted frame

Laser wakefield acceleration modeling using the Lorentz-boosted frame technique in the particle-in-cell code has demonstrated orders of magnitude speedups. A convergence study was previously conducted in cases with external injection in the linear regime and without injection in the nonlinear regime, and the obtained results have shown a convergence within the percentage level. Here, a convergence study is carried out to model electron self-injection in a 2D–3V configuration. It is observed that the Lorentz-boosted frame technique is capable of modeling complex particle dynamics with a significant speedup. This result is crucial to curtail the computational time of the modeling of future chains of laser wakefield accelerator stages with high accuracy.

43 PARTICLE ACCELERATORS↗

Improving convergence of the Matrix Power Control Algorithm for random vibration testing

Herein, this paper describes modifications to the Matrix Power Control Algorithm (MPCA) to improve convergence for Random Vibration Control (RVC) testing. In particular, this paper presents Multiple-Input Multiple-Output (MIMO) implementations of MPCA in simulation and experiment. An Euler–Bernoulli beam model was simulated with applied base excitations and the Box Assembly with Removable Component (BARC) was used in experiment to validate results. The Bayesian optimization package Dragonfly was used to optimize control parameters. Additionally, a moving-average was employed and optimized to improve the measured response feedback for MPCA, reduce the number of averages needed to be taken between control updates, and further improve convergence. The key results of this paper show that the performance of MPCA can be improved by tuning the control parameters and by applying an optimized moving-average. Furthermore, it is demonstrated that convergence can be achieved within 12 drive-frames, which greatly enhances vibration control capability.

42 ENGINEERING↗