Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Constructive Tree”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Geometric-optical modeling of a conifer forest canopy

A geometric-optical model of a conifer forest canopy was constructed to describe the variance of a remotely-sensed image of a forest stand. The model is driven by interpixel variance generated from three sources: (1) the number of crowns in the pixel; (2) the size of the individual crowns; and (3) the overlapping of crowns and shadows. The illumination of a tree and its shadow is described as a cone using parallel-ray geometry. The model can also be inverted to provide estimates of the size, shape and spacing of the trees using remotely-sensed imagery and a minimum of ground measurements. The results of field tests using 10-meter and 80-meter multispectral imagery of two test conifer stands in northeastern California are presented. It is shown that the model produces reasonable estimates for the geometric parameters of the stand and appears to be sufficiently robust for application to other geometric shapes corresponding to different types of vegetation.

Li, X.↗

Preliminary analysis of thermal-infrared multispectral scanner data of the Iron Hill, Colorado carbonatite-alkalic rock complex

The Iron Hill carbonatite-alkalic igneous rock complex is in the Powderhorn mining district, approximately 40 km south-southwest of Gunnison, Colorado. The complex, which occupies about 30 sq km, was emplaced in metasedimentay and metavolcanic rocks during the later Precambrian or early Cambrian. The main rock types in the complex, from oldest to youngest, are fenite, pyroxenite, uncompahgrite, ijolite, nepheline syenite, and dolomitic carbonatite. The carbonatite is limonitic and forms an elliptially shaped 4 sq km stock. Calcitic and dolomitic carbonatite dikes are also numerous throughout the complex and in the pre-existing rocks. Pyroxenite is the most widespread rock type within the complex, but pyroxene is extensively altered to biotite, phlogopite, and vermiculite. Fenite, which formed through Na, K-metasomatism of the country rocks, typically contains more feldspar and less quartz than the equivalent unaltered country rocks. The other alkalic rock types are less widespread and less well exposed. Parts of the complex are covered by Oligocene ash-flow tuff and alluvial, colluvial, and glacial deposits. Sagebrush and grass cover is moderately dense to very dense at low to intermediate elevations; coniferous tree cover is dense at high elevations and on some north-facing slopes at lower elevations. A new algorithm was used to compute spectral emissivity ratios, independent of any emissivity assumptions. This algorithm has the advantage that any of the possible emissivity ratios can be computed and, thus, a large variety of composite ratio images can be constructed, which permits examination of various geologic hypotheses based on the spectral properties of the surface materials.

Rowan, Lawrence C.↗

SkICAT: A cataloging and analysis tool for wide field imaging surveys

We describe an integrated system, SkICAT (Sky Image Cataloging and Analysis Tool), for the automated reduction and analysis of the Palomar Observatory-ST ScI Digitized Sky Survey. The Survey will consist of the complete digitization of the photographic Second Palomar Observatory Sky Survey (POSS-II) in three bands, comprising nearly three Terabytes of pixel data. SkICAT applies a combination of existing packages, including FOCAS for basic image detection and measurement and SAS for database management, as well as custom software, to the task of managing this wealth of data. One of the most novel aspects of the system is its method of object classification. Using state-of-theart machine learning classification techniques (GID3* and O-BTree), we have developed a powerful method for automatically distinguishing point sources from non-point sources and artifacts, achieving comparably accurate discrimination a full magnitude fainter than in previous Schmidt plate surveys. The learning algorithms produce decision trees for classification by examining instances of objects classified by eye on both plate and higher quality CCD data. The same techniques will be applied to perform higher-level object classification (e.g., of galaxy morphology) in the near future. Another key feature of the system is the facility to integrate the catalogs from multiple plates (and portions thereof) to construct a single catalog of uniform calibration and quality down to the faintest limits of the survey. SkICAT also provides a variety of data analysis and exploration tools for the scientific utilization of the resulting catalogs. We include initial results of applying this system to measure the counts and distribution of galaxies in two bands down to Bj is approximately 21 mag over an approximate 70 square degree multi-plate field from POSS-II. SkICAT is constructed in a modular and general fashion and should be readily adaptable to other large-scale imaging surveys.

Weir, N.↗

Shuttle radar images for geologic mapping in tropical rainforest

Images of forested low-relief terrain in the Amazon basin of Brazil, obtained with airborne imaging radar in the Radambrasil project, are compared with SIR-A and Landsat MSS band-7 images to evaluate their usefulness in constructing geologic maps. Sample images are shown, and it is found that Radam images are more useful in distinguishing drainage patterns and mapping the region distribution of stream channels due to their relatively low depression angles (less than 25 deg as opposed to 43-37 deg for SIR-A), but that SIR-A images give superior discrimination of alluvial forest, where trees stand in water, due to the higher reflectivity of branches and water at the SIR-A wavelength (23.5 cm as opposed to 3 cm for Radam). Alluvial forest is also identified by Landsat band 7.

Ford, J. P.↗

Enabling Assurance in the MBSE Environment

A number of specific benefits that fit within the hallmarks of effective development are realized with implementation of model-based approaches to systems and assurance. Model Based Systems Engineering (MBSE) enabled by standardized modeling languages (e.g., SysML®) is at the core. These benefits in the context of spaceflight system challenges can include [1]: • Improved management of complex development • Reduced risk in the development process • Improved cost management • Improved design decisions With appropriate modeling techniques the assurance community also can improve early oversight and insight into project development. NASA has shown the basic constructs of SysML in an MBSE environment offer several key advantages, within a Model Based Mission Assurance (MBMA) initiative [2, 3]. These include the following: • Model viewpoints that promote rapid and systematic assessment of requirements coverage, hazard tagging and risk management • Embedded safety assessments for launch vehicles • Deployment of model assisted development of reliability products - Failure Modes and Effects Analyses (FMEAs) and Fault Trees • Test Planning • Validation and Verification of complex functions • Support of Assurance Case development for complex systems In addition, while there are benefits to be harvested, there is a realization that these do not come without effort and cost. Enabling model-based approaches requires structure, not only in an organizational context, but in a modeling context as well. There can be a steep learning curve and costs associated to train skilled modelers. But, on the other hand, not all of the assurance community need to be modelers. Models themselves must conform to ontologies that enable assurance. This places constraints upon the models and modelers. Optimums have yet to be developed where resources and constraints on modeling must be traded off in the organization and modeling efforts for projects. A number of barriers need to be overcome, as well, which pose challenges to the developers of the software that supports MBSE/MBMA. Information and data must be made to flow seamlessly through the life cycle. Because there is a wide variety of tools used in the community, to avoid the problems of the past of silos, delays, and diverging interests, information should flow among these tools to support the “single source of truth” paradigm of MBSE. This will greatly facilitate MBMA and advancement of assurance functions.

Evans, John W.↗

BOREAS TE-4 Gas Exchange Data from Boreal Tree Species

The BOREAS TE-4 team collected steady-state gas exchange and reflectance data from several species in the BOREAS SSA during 1994 and in the NSA during 1996. Measurements of light, CO2, temperature, and humidity response curves were made by the BOREAS TE-4 team during the summers of 1994 and 1996 using intact attached leaves of boreal forest species located in the BOREAS SSA and NSA. These measurements were conducted to calibrate models used to predict photosynthesis, stomatal conductance, and leaf respiration. The 1994 and 1996 data can be used to construct plots of response functions or for parameterizing models. Parameter values are suitable for application in SiB2 (Sellers et al., 1996) or the leaf model of Collatz et al. (1991), and programs can be obtained from the investigators. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Hall, Forrest G.↗

Tree-oriented interactive processing with an application to theorem-proving, appendix E

The concept of unstructured structure editing and ted, an editor for unstructured trees, is described. Ted is used to manipulate hierarchies of information in an unrestricted manner. The tool was implemented and applied to the problem of organizing formal proofs. As a proof management tool, it maintains the validity of a proof and its constituent lemmas independently from the methods used to validate the proof. It includes an adaptable interface which may be used to invoke theorem provers and other aids to proof construction. Using ted, a user may construct, maintain, and verify formal proofs using a variety of theorem provers, proof checkers, and formatters.

Hammerslag, David↗

Identification of phenological stages and vegetative types for land use classification

The author has identified the following significant results. A large grassland was located on the Kenai Peninsula which may be a potential grazing land. Two 1:250 K vegetation maps were constructed from ERTS-1 scenes 1049-20505 and 1066-20453 using 70 mm MSS chips and black and white prints for an area of 3.5 million acres. Another area (464,000 acres) was mapped using digital data. The latter map is the most accurate and detailed vegetation map of that area produced to date. Areal extents of identified vegetation types were derived for the area mapped from digital data. Early spring (prior to leafing out of deciduous trees) is suspected as being the best time for mapping Alaskan vegetation from MSS data due to the best time for mapping Alaskan vegetation from MSS data due to the radiometrically distinctness of the vegetation communities at that time. Vegetative overlays produced at 1:250 K compare favorably with vegetative maps compiled by Lloyd A. Spetzman and assembled by the joint Federal-State Land Use Planning Commission for Alaska.

Branton, C. I.↗

Identification of phenological stages and vegetative types for land use classification

The author has identified the following significant results. A large grassland was located on the Kenai Peninsula which may be a potential grazing land. Two 1:250,000 vegetation maps were constructed from ERTS-1 scenes 1049-20505 and 1066-20453 using 70 mm MSS chips and black and white prints for an area of 3.5 million acres. Another area (464,000 acres) was mapped using digital data. The latter map is the most accurate and detailed vegetation map of that area produced to date. Areal extents of identified vegetation types were derived for the area mapped from digital data. Early spring (prior to leafing out of the deciduous trees) is suspected as being the best time for mapping Alaskan vegetation from MSS data due to the radiometrically distinctness of the vegetation communities at that time.

Branton, C. I.↗

How Did I Get Here?

What country was responsible for much of the early work in laser altimetry, who was the first scientist to look at a vegetation profile generated by a laser, who first related laser ranges to forest structure? The purpose of this paper is to look back 3+ decades ago when forestry lidar was in its formative years and to give credit to those who first thought to employ a laser to measure the Earth's surface. As with much scientific research, advances were often made independently and concurrently in a number of countries. Functioning lasers were first demonstrated in 1960 in the USA and in 1961 in the USSR, but research into the use of lasers as forest measurement tools did not begin for another IS years. Initially, with respect to Earth resources, lasers were employed to measure sea ice surface roughness, to make near-shore bathymetric measurements, to penetrate forests to make detailed topographic measurements, and to fluoresce oceanic phytoplankton for surface current studies. Some of these early studies noted that forest profiles were evident but in fact added noise to topographic retrievals. Trees became the signal rather than noise in 1976 when researchers in the Canadian Forest Service went to an IUFRO conference in Oslo and reported on efforts to better estimate timber volume in tropical forests. They employed large-scale airphotos (1:500 up to 1:4000) to measure the top of the tropical canopy, an avionic radar to measure the location of the ground beneath the canopy, and a barometric sensor to record aircraft/radar height above a datum (e.g., sea level). Their radar did not work well in dense vegetation and mentioned in passing that a laser altimeter had worked well in Canadian forests. But in a report 2 years later they reported that, on a study area in Costa Rica, the radar ground line was much improved and no mention is made of a lidar altimeter. In the USSR in 1977, Russian researchers felled a birch and a spruce, aimed a helium-neon, 0.63 micron laser with a spot size of approx 25mm, at the horizontal trees, produced a profilograph, compared it to tape measurements, and concluded that, with increased power, such a laser could be mounted on an aircraft to remotely measure forest canopies. In 1979, they mounted their He-Ne laser on an AN-2 biplane and acquired their fIrSt airborne profiles. Scientists with TRANARG, a mapping/surveying company in Caracas, Venezuela, reported on 1976 flights employing a helium-neon lidar to collect over 11,000 km of lidar profiles spaced 1.5 km apart in order to construct a topographic map to help site a new reservoir. They noted 35-40 m median canopy heights with emergents up to 55 m in their profiles. These studies and others that utilize these height and canopy density metrics for forest mensuration are reviewed in this glance backwards at the history of forestry lidar.

Nelson, Ross↗

Boundary to Constructive Solid Geometry Mappings: a Focus on 2-D Issues

The problem of converting boundary representation (B-rep) to constructive solid geometry representation (CSG-rep) (and vice versa) is discussed in two phases. The first phase entails finding a CSG-rep that defines the region bounded by a polygonal profile curve. The second phase utilizes the results of the first phase to find a CSG-rep for many non-polygonal profile curves. A mathematically concise representation of a region bounded by a polygonal is presented. Namely, any polygonal region bounded by an n sided polygon may be represented by a binary tree which has at most n planar halfspaces as leaves. A structure for this representation and an algorithm for calculating is discussed.

Peterson, D. P.↗

Woody Plant Decline in the Sahel of Western Niger (1996-2017): Is it Driven by Climate or Land Use Changes?

Although a recovery of woody vegetation has been observed throughout the Sahel, western Niger has not followed the overall satellite-derived greening trend. While satellite imagery can be used to study overall patterns and trends, only field observations can provide insights in the dynamics of woody plant populations. Here we used field data from 29 sites in the Dantiandou district in Niger to study woody species composition, plant density, crown cover, basal area, foliage and wood mass from 1996 to 2017. All sites show a decrease in woody plant parameters with a faster decrease in rangeland than in agricultural land. Most of the decrease is due to the loss of shrubs, while trees do not change significantly. When field observations were scaled up to the district level using land use maps, shrub density decreased from 342 to 155 ha-1in agricultural land, and from 1567 to 250 ha-1in rangeland. Trends in annual rainfall and soil moisture during the study period were not significant and cannot explain the decrease of woody vegetation. Instead, the expansion of cropped areas, shortened crop-fallow cycles and the increasing pressure on wood resources to satisfy demand for fuel and construction materials may have contributed to the decline.

Pierre Hiernaux↗

Odyssey personal communications satellite system

The spectacular growth of cellular telephone networks has proved the demand for personal communications. Large regions of the world are too sparsely populated to be economically served by terrestrial cellular communications. Since satellites are well suited to this application, TRW filed with the FCC on May 31, 1993 for the Odyssey construction permit. Odyssey will provide high quality wireless communication services worldwide from satellites. These services will include: voice, data, paging, and messaging. Odyssey will be an economical approach to providing communications. A constellation of 12 satellites will be orbited in three, 55 deg. inclined planes at an altitude of 10,354 km to provide continuous coverage of designated regions. Two satellites will be visible anywhere in the world at all times. This dual visibility leads to high line-of-sight elevation angles, minimizing obstructions by terrain, trees and buildings. Each satellite generates a multibeam antenna pattern that divides its coverage area into a set of contiguous cells. The communications system employs spread spectrum CDMA on both the uplinks and downlinks. This signaling method permits band sharing with other systems and applications. Signal processing is accomplished on the ground at the satellite's 'Gateway' stations. The 'bent pipe' transponders accommodates different regional standards, as well as signaling changes over time. The low power Odyssey handset will be cellular compatible. Multipath fade protection is provided in the handset.

Spitzer, Christopher J.↗

Southern Indiana Ecological Conservation: Assessing Canopy Cover Dynamics and Forest Type Groupings in Southern Indiana to Inform Restoration Activities

As human influence continues to negatively impact natural habitats, timely assessment of ecosystem changes and restoration is critical to protect forest health and biodiversity. In our study, we focused on oak-hickory forests in southern Indiana. Oak-hickory forests were the dominant ecosystem dynamic in present-day Indiana for centuries until European colonization, which brought about fire suppression and, eventually, fire exclusion. Anthropogenic fire exclusion in this fire-adapted habitat led to the encroachment of mesic species, such as beech and maple trees. This process, commonly referred to as mesophication, was the focus of our study. Our team performed a feasibility study in using NASA Earth observations to support our end-user partners, Let the Sun Shine In and the US Forest Service, Hoosier National Forest, in their selection of oak-hickory restoration sites. To aid in our analysis of the forest dynamics of southern Indiana, our team used Landsat 5, 8, and 9 imageries, along with other ancillary datasets to create maps to illustrate areas that would most benefit from partners’ forest restoration and management practices. By constructing a Green Vegetation Fraction change map across our 39-year study period (1984-2023) to visualize the change in forest cover and creating a restoration suitability assessment map to reveal sites that met requirements for oak-hickory growth, we provided our partners with suitable site selection for restorative management and found that 3.3% of our entire study area and 4.4% of the Hoosier National Forest were deemed suitable. Our feasibility study benefits southern Indiana restoration by aiding our partners in efficiently selecting sites for prescribed burning, forest thinning, and other restoration management practices.

restoration↗

RSRM Nozzle Anomalous Throat Erosion Investigation Overview

In September, 1996, anomalous pocketing erosion was observed in the aft end of the throat ring of the nozzle of one of the reusable solid rocket motors (RSRM 56B) used on NASA's space transportation system (STS) mission 79. The RSRM throat ring is constructed of bias tape-wrapped carbon cloth/ phenolic (CCP) ablative material. A comprehensive investigation revealed necessary and sufficient conditions for occurrence of the pocketing event and provided rationale that the solid rocket motors for the subsequent mission, STS-80, were safe to fly. The nozzles of both of these motors also exhibited anomalous erosion similar to, but less extensive than that observed on STS-79. Subsequent to this flight, the investigation to identify both the specific causes and the corrective actions for elimination of the necessary and sufficient conditions for the pocketing erosion was intensified. A detailed fault tree approach was utilized to examine potential material and process contributors to the anomalous performance. The investigation involved extensive constituent and component material property testing, pedigree assessments, supplier audits, process audits, full scale processing test article fabrication and evaluation, thermal and thermostructural analyses, nondestructive evaluation, and material performance tests conducted using hot fire simulation in laboratory test beds and subscale and full scale solid rocket motor static test firings. This presentation will provide an over-view of the observed anomalous nozzle erosion and the comprehensive, fault-tree based investigation conducted to resolve this issue.

Clinton, R. G., Jr.↗

Three-Dimensional Modeling of the Solar Wind: From the Coronal Base to the Outer Heliosphere

We have developed a global fully three-dimensional magnetohydrodynamic solar wind model for the region that extends from the coronal base to 100 AU. The simulation domain consists of tree spherical shell subdomains with computational boundaries between them placed at 20 solar radii and 0.3 AU. The location of the first boundary ensures that the flow at the boundary is both supersonic and super-Alfvenic. A steady-state solution in the innermost (coronal) region is obtained by the time-relaxation method. The solution uses a tilted dipole model or solar magnetograms as the boundary condition at the coronal base and includes a flux of Alfven waves in the WKB approximation which provide additional acceleration for the coronal outflow in the open field regions. The intermediate region solution is constructed by the integration of steady-state equations along radius using a marching scheme. The outer region solution (0.3-100 AU) is obtained again by the time relaxation and takes into account turbulence transport and heating as well as heating, flow deceleration, and other effects due to the interstellar pickup protons treated as a separate fluid. We use the model to simulate the global steady-state structure of the solar wind from the coronal base to the heliospheric boundary and compare the results with Ulysses and Voyager observations.

Usmanov, A. V↗

Sequential Testing Algorithms for Multiple Fault Diagnosis

In this paper, we consider the problem of constructing optimal and near-optimal test sequencing algorithms for multiple fault diagnosis. The computational complexity of solving the optimal multiple-fault isolation problem is super-exponential, that is, it is much more difficult than the single-fault isolation problem, which, by itself, is NP-hard. By employing concepts from information theory and AND/OR graph search, we present several test sequencing algorithms for the multiple fault isolation problem. These algorithms provide a trade-off between the degree of suboptimality and computational complexity. Furthermore, we present novel diagnostic strategies that generate a diagnostic directed graph (digraph), instead of a diagnostic tree, for multiple fault diagnosis. Using this approach, the storage complexity of the overall diagnostic strategy reduces substantially. The algorithms developed herein have been successfully applied to several real-world systems. Computational results indicate that the size of a multiple fault strategy is strictly related to the structure of the system.

Shakeri, Mojdeh↗

Sequential Test Strategies for Multiple Fault Isolation

In this paper, we consider the problem of constructing near optimal test sequencing algorithms for diagnosing multiple faults in redundant (fault-tolerant) systems. The computational complexity of solving the optimal multiple-fault isolation problem is super-exponential, that is, it is much more difficult than the single-fault isolation problem, which, by itself, is NP-hard. By employing concepts from information theory and Lagrangian relaxation, we present several static and dynamic (on-line or interactive) test sequencing algorithms for the multiple fault isolation problem that provide a trade-off between the degree of suboptimality and computational complexity. Furthermore, we present novel diagnostic strategies that generate a static diagnostic directed graph (digraph), instead of a static diagnostic tree, for multiple fault diagnosis. Using this approach, the storage complexity of the overall diagnostic strategy reduces substantially. Computational results based on real-world systems indicate that the size of a static multiple fault strategy is strictly related to the structure of the system, and that the use of an on-line multiple fault strategy can diagnose faults in systems with as many as 10,000 failure sources.

Shakeri, M.↗