Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Configuration interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ab initio molecular dynamics on quantum computers

Ab initio molecular dynamics (AIMD) is a valuable technique for studying molecules and materials at finite temperatures where the nuclei evolve on potential energy surfaces obtained from accurate electronic structure calculations. In this work, we present an approach to running AIMD simulations on noisy intermediate-scale quantum (NISQ)-era quantum computers. The electronic energies are calculated on a quantum computer using the variational quantum eigensolver (VQE) method. Algorithms for computation of analytical gradients entirely on a quantum computer require quantum fault-tolerant hardware, which is beyond NISQ-era. Therefore, we compute the energy gradients numerically using finite differences, the Hellmann-Feynman theorem, and a correlated sampling technique. This method only requires additional classical calculations of electron integrals for each degree of freedom without any additional computations on a quantum computer beyond the initial VQE run. As a proof of concept, AIMD simulations are demonstrated for the H-2 molecule on IBM quantum devices. In addition, we demonstrate the validity of the method for larger molecules using full configuration interaction wave functions. As quantum hardware and noise mitigation techniques continue to improve, the method can be utilized for studying larger molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A hybrid approach to excited-state-specific variational Monte Carlo and doubly excited states

We extend our hybrid linear-method/accelerated-descent variational Monte Carlo optimization approach to excited states and investigate its efficacy in double excitations. In addition to showing a superior statistical efficiency when compared to the linear method, our tests on small molecules show good energetic agreement with benchmark methods. We also demonstrate the ability to treat double excitations in systems that are too large for a full treatment by using selected configuration interaction methods via an application to 4-aminobenzonitrile. Finally, we investigate the stability of state-specific variance optimization against collapse to other states’ variance minima and find that symmetry, Ansatz quality, and sample size all have roles to play in achieving stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thermal mean-field theories

Several closely related ab initio thermal mean-field theories for fermions, both well-established and new ones, are compared with one another at the formalism level and numerically. The theories considered are Fermi–Dirac theory; thermal Hartree–Fock (HF) theory; two modifications of the thermal single-determinant and the first-order finite-temperature many-body perturbation theory based on a zero-temperature or thermal HF reference. Furthermore, thermal full-configuration-interaction theory is used as the benchmark.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Optical telecommunications-band clock based on neutral titanium atoms

Here, we propose an optical clock based on ultranarrow transitions in neutral titanium, which exhibit small blackbody radiation and quadratic Zeeman shifts and have wavelengths in the S-, C-, and L-telecommunications fiber bands, allowing for integration with robust laser technology. We calculate relevant properties using a high-precision relativistic hybrid method that combines configuration interaction and coupled-cluster approaches. To identify magic wavelengths, we have completed the largest-to-date direct dynamical polarizability calculations. Finally, we identify challenges that arise from magnetic dipole-dipole interactions and describe an approach to overcome them. A telecommunications-band atomic frequency standard will aid the deployment of optical clock networks and clock comparisons over long distances.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Atomic isotropic hyperfine properties for first row elements (B–F) revisited

Benchmark quality isotropic hyperfine properties have been obtained for first row elements (B–F) using a systematic composite approach consisting of a sequence of core/valence correlation consistent basis sets, up through aug-cc-pCV8Z, along with configuration interaction and coupled cluster theory methods. The best nonrelativistic final values (in MHz) are 10.64 (B), 20.22 (C), 10.59 (N), –31.74 (O), and 318.30 (F) and are in very good agreement with available experimental values for these difficult-to-describe properties. Agreement is especially close in the case of N, which has the most accurate experimental value. The spin densities derived from the best composite level of theory were found to closely follow a simple quadratic scaling with the atomic number, Z. Finally, observed convergence rates in the 1-particle and n-particle expansions obtained here may be useful in judging likely accuracy that can be expected in studies of molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Surrogate Hessian accelerated structural optimization for stochastic electronic structure theories

In this work, we present an efficient energy-based method for structural optimization with stochastic electronic structure theories, such as diffusion quantum Monte Carlo (DMC). This method is based on robust line-search energy minimization in reduced parameter space, exploiting approximate but accurate Hessian information from a surrogate theory, such as density functional theory. The surrogate theory is also used to characterize the potential energy surface, allowing for simple but reliable ways to maximize statistical efficiency while retaining controllable accuracy. We demonstrate the method by finding the minimum DMC energy structures of the selected flake-like aromatic molecules, such as benzene, coronene, and ovalene, represented by 2, 6, and 19 structural parameters, respectively. In each case, the energy minimum is found within two parallel line-search iterations. The method is near-optimal for a line-search technique and suitable for a broad range of applications. It is easily generalized to any electronic structure method where forces and stresses are still under active development and implementation, such as diffusion Monte Carlo, auxiliary-field Monte Carlo, and stochastic configuration interaction, as well as deterministic approaches such as the random-phase approximation. Accurate and efficient means of geometry optimization could shed light on a broad class of materials and molecules, showing high sensitivity of induced properties to structural variables.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electronic specific heat capacities and entropies from density matrix quantum Monte Carlo using Gaussian process regression to find gradients of noisy data

In this work, we present a machine learning approach to calculating electronic specific heat capacities for a variety of benchmark molecular systems. Our models are based on data from density matrix quantum Monte Carlo, which is a stochastic method that can calculate the electronic energy at finite temperature. As these energies typically have noise, numerical derivatives of the energy can be challenging to find reliably. In order to circumvent this problem, we use Gaussian process regression to model the energy and use analytical derivatives to produce the specific heat capacity. From there, we also calculate the entropy by numerical integration. We compare our results to cubic splines and finite differences in a variety of molecules in which Hamiltonians can be diagonalized exactly with full configuration interaction. We finally apply this method to look at larger molecules where exact diagonalization is not possible and make comparisons with more approximate ways to calculate the specific heat capacity and entropy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Flexibility of the factorized form of the unitary coupled cluster Ansatz

The factorized form of the unitary coupled cluster Ansatz is a popular state preparation Ansatz for electronic structure calculations of molecules on quantum computers. It is often viewed as an approximation (based on the Trotter product formula) for the conventional unitary coupled cluster operator. In this work, we show that the factorized form is quite flexible, allowing one to range from a conventional configuration interaction, to conventional unitary coupled cluster, to efficient approximations that lie in between these two. The variational minimization of the energy often allows simpler factorized unitary coupled cluster approximations to achieve high accuracy, even if they do not accurately approximate the Trotter product formula. This is similar to how quantum approximate optimization algorithms can achieve high accuracy with a small number of levels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Hybrid gausslet/Gaussian basis sets

We introduce hybrid gausslet/Gaussian basis sets, where a standard Gaussian basis is added to a gausslet basis in order to increase accuracy near the nuclei while keeping the spacing of the grid of gausslets relatively large. The Gaussians are orthogonalized to the gausslets, which are already orthonormal, and approximations are introduced to maintain the diagonal property of the two electron part of the Hamiltonian so that it continues to scale as the second power of the number of basis functions rather than the fourth. We introduce several corrections to the Hamiltonian designed to enforce certain exact properties, such as the values of certain two-electron integrals. We also introduce a simple universal energy correction that compensates for the incompleteness of the basis stemming from the electron–electron cusps based on the measured double occupancy of each basis function. We perform a number of Hartree Fock and full configuration interaction (full-CI) test calculations on two electron systems and Hartree Fock on a ten-atom hydrogen chain to benchmark these techniques. The inclusion of the cusp correction allows us to obtain complete basis set full-CI results for the two electron cases at the level of several micro-Hartrees, and we see similar apparent accuracy for Hartree Fock on the ten-atom hydrogen chain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Quantum computation solves a half-century-old enigma: Elusive vibrational states of magnesium dimer found

The high-lying vibrational states of the magnesium dimer (Mg 2 ), which has been recognized as an important system in studies of ultracold and collisional phenomena, have eluded experimental characterization for half a century. Until now, only the first 14 vibrational states of Mg 2 have been experimentally resolved, although it has been suggested that the ground-state potential may support five additional levels. Here, we present highly accurate ab initio potential energy curves based on state-of-the-art coupled-cluster and full configuration interaction computations for the ground and excited electronic states involved in the experimental investigations of Mg 2 . Our ground-state potential unambiguously confirms the existence of 19 vibrational levels, with ~1 cm -1 root mean square deviation between the calculated rovibrational term values and the available experimental and experimentally derived data. Our computations reproduce the latest laser-induced fluorescence spectrum and provide guidance for the experimental detection of the previously unresolved vibrational levels.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Atomic isotropic hyperfine properties for second row elements (Al–Cl)

Isotropic hyperfine properties have been obtained for the second row elements Al–Cl using a systematic composite approach consisting of a sequence of core/valence correlation consistent basis sets, up through aug-cc-pCV7Z, along with configuration interaction and coupled cluster methods. The best nonrelativistic final values for the atomic ground states (in MHz) are -1.80 27 Al ( 2 P o 1/2 ), -24.31 29 Si ( 3 P 0 ), 63.70 31 P ( 4 So 3/2 ), 20.77 33 S ( 3 P 2 ), and 35.42 35 Cl ( 2 P o 3/2 ). We find a large K shell contribution to the spin density at the nucleus that is almost canceled by the L and M shell contributions. The spin density in atomic units is approximately linear with respect to the atomic number.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Optimization of the Reax force field for the lithium–oxygen system using a high fidelity charge model

Studies using molecular dynamics (MD) have long struggled to simulate the failure modes of materials, predicting unrealistically high ductility and failing to capture brittle fracture. The primary cause of this shortcoming is an inadequate description of bond breaking. While reactive force fields such as ReaxFF show improvements compared to traditional force fields, the charge models used yield unphysical partial charges, especially during dissociation of ionic bonds. This flaw may be remedied by using the atom-condensed Kohn–Sham density functional theory (DFT) approximated to a second order (ACKS2) charge model for determining partial charges. In this work, we present a new ACKS2-enabled Reax force field for fracture simulations of lithium oxide systems, which was obtained by training against an extensive set of DFT, multireference configuration interaction (MRCI), and MRCI+Q reference data using genetic optimization techniques. This new force field significantly improves the bond breaking behavior, but still cannot fully capture the brittle fracture in MD simulations, suggesting more research is needed to improve simulation of brittle fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Computing x-ray absorption spectra from linear-response particles atop optimized holes

State specific orbital optimized density functional theory (OO-DFT) methods, such as restricted open-shell Kohn–Sham (ROKS), can attain semiquantitative accuracy for predicting x-ray absorption spectra of closed-shell molecules. OO-DFT methods, however, require that each state be individually optimized. In this Communication, we present an approach to generate an approximate core-excited state density for use with the ROKS energy ansatz, which is capable of giving reasonable accuracy without requiring state-specific optimization. Herein, this is achieved by fully optimizing the core-hole through the core-ionized state, followed by the use of electron-addition configuration interaction singles to obtain the particle level. This hybrid approach can be viewed as a DFT generalization of the static-exchange (STEX) method and can attain ~0.6 eV rms error for the K-edges of C–F through the use of local functionals, such as PBE and OLYP. This ROKS(STEX) approach can also be used to identify important transitions for full OO ROKS treatment and can thus help reduce the computational cost of obtaining OO-DFT quality spectra. ROKS(STEX), therefore, appears to be a useful technique for the efficient prediction of x-ray absorption spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Evaluating the gradients of localized diabatic state energies and couplings at minimum cost

We calculate the gradients of Boys diabatic state energies and couplings when the electronic vector space is generated by configuration interaction singles. Our approach follows the Lagrangian approach of Paz and Glover (rather than direct differentiation of the adiabatic-to-diabatic approaches that have been published previously). The result is that we achieve a dramatic increase in savings over previous approaches, and the present approach should be immediately useful to scientists focused on electronic relaxation, especially chemists studying electron transfer who wish to go beyond the Condon approximation. Here, a future extension to time-dependent density functional theory in the Tamm–Dancoff approximation is clear.

Chemical physics↗
DOE OSTI2024

Ground state property calculations of LiH n complexes using IBM Qiskit’s quantum simulator

In this study, the variational quantum eigensolver (VQE) on a quantum simulator is used in calculating ground state electronic structure properties of the LiH n , n = 1–3, complexes including their singly charged ions. Results calculated using classical electronic structure algorithms are also included. We investigate the use of the unitary coupled cluster with singles and doubles (UCCSD) Ansatz using VQE within Qiskit and compare results to full configuration interaction (FCI) calculations. Computed ground state energies, electron affinities, ionization potentials, and dipole moments are considered. We report the first-of-its-kind simulated quantum computing results of selected LiH n species and use the parity orbital to qubit mapping scheme. We find that VQE/UCCSD results are comparable to classical coupled clusters with singles and doubles for all considered systems with respect to FCI. A VQE calculation cost evaluation is included in which we evaluate performance using both Jordan–Wigner and parity orbital to qubit mapping schemes. We also discuss some of the current limitations of utilizing VQE for the study of chemical systems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Probing ab initio emergence of nuclear rotation

Structural phenomena in nuclei, from shell structure and clustering to superfluidity and collective rotations and vibrations, reflect emergent degrees of freedom. Ab initio theory describes nuclei directly from a fully microscopic formulation. We can therefore look to ab initio theory as a means of exploring the emergence of effective degrees of freedom in nuclei. For the illustrative case of emergent rotational bands in the $Be$ isotopes, we establish an understanding of the underlying oscillator space and angular momentum (orbital and spin) structure. We consider no-core configuration interaction (NCCI) calculations for 7, 9, 11 Be with the Daejeon16 internucleon interaction. Although shell model or rotational degrees of freedom are not assumed in the ab initio theory, the NCCI results are suggestive of the emergence of effective shell model degrees of freedom (0$\hbar$ω and 2$\hbar$ω excitations) and LS-scheme rotational degrees of freedom, consistent with an Elliott–Wilsdon SU(3) description. Finally, these results provide some basic insight into the connection between emergent effective collective rotational and shell model degrees of freedom in these light nuclei and the underlying ab initio microscopic description.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Calculation of spin–orbit couplings using RASCI spinless one-particle density matrices: Theory and applications

Here we present the formalism and implementation for calculations of spin–orbit couplings (SOCs) using the Breit–Pauli Hamiltonian and non-relativistic wave functions described by the restricted active space configuration interaction (RASCI) method with general excitation operators of spin-conserving spin-flipping, ionizing, and electron-attaching types. The implementation is based on the application of the Wigner–Eckart theorem within the spin space, which enables the calculation of the entire SOC matrix based on the explicit calculation of just one transition between the two spin multiplets. Numeric results for a diverse set of atoms and molecules highlight the importance of a balanced treatment of correlation and adequate basis sets and illustrate the overall robust performance of RASCI SOCs. The new implementation is a useful addition to the methodological toolkit for studying spin-forbidden processes and molecular magnetism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

The electron affinity of the uranium atom

The results of a combined experimental and computational study of the uranium atom are presented with the aim of determining its electron affinity. Experimentally, the electron affinity of uranium was measured via negative ion photoelectron spectroscopy of the uranium atomic anion, U – . Computationally, the electron affinities of both thorium and uranium were calculated by conducting relativistic coupled-cluster and multi-reference configuration interaction calculations. The experimentally determined value of the electron affinity of the uranium atom was determined to be 0.309 ± 0.025 eV. The computationally predicted electron affinity of uranium based on composite coupled cluster calculations and full four-component spin–orbit coupling was found to be 0.232 eV. Predominately due to a better convergence of the coupled cluster sequence for Th and Th – , the final calculated electron affinity of Th, 0.565 eV, was in much better agreement with the accurate experimental value of 0.608 eV. In both scenarios, the ground state of the anion corresponds to electron attachment to the 6d orbital.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗