Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Component effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Radiation and temperature effects on electronic components investigated under the CSTI high capacity power project

The effects of nuclear radiation and high temperature environments must be fully known and understood for the electronic components and materials used in both the Power Conditioning and Control subsystem and the reactor Instrumentation and Control subsystem of future high capacity nuclear space power systems. This knowledge is required by the designer of these subsystems in order to develop highly reliable, long-life power systems for future NASA missions. A review and summary of the experimental results obtained for the electronic components and materials investigated under the power management element of the Civilian Space Technology Initiative (CSTI) high capacity power project are presented: (1) neutron, gamma ray, and temperature effects on power semiconductor switches, (2) temperature and frequency effects on soft magnetic materials; and (3) temperature effects on rare earth permanent magnets.

Schwarze, Gene E.↗
NASA NTRS1975

Effect of halo component on bar-formation in disk galaxies

Numerical experiments are performed to determine the effect of a fixed halo component of mass on the stability of purely stellar disks. The rotation curve of the fixed halo component corresponds to the Schmidt model of the galaxy. It is found that when the stellar disk contains less than 50% of the total mass, the large-scale bar-making instability is effectively suppressed. For disks containing 50% or more of the total mass, a bar structure quickly forms.

Hohl, F.↗
NASA NTRS1988

The extinction properties of forest components

The effect of each forest component on the extinction of electromagnetic waves is investigated by modeling the branches with finite cylinders, deciduous leaves with elliptic disks, and coniferous leaves with needles. The inner field is estimated by the field inside an infinitely long cylinder of similar properties for the branches, and by the Shifrin approximation for the leaves. For each forest component analytic expressions were derived for the extinction cross section via the forward scattering theorem and for ohmic and scattered losses. For branches, the variation of the extinction cross section obtained via the forward scattering theorem is illustrated numerically as a function of the branch radius and the imaginery part of its dielectric constant. It is compared with the measurements from a single branch. For the leaves, the forward scattering theorem gives value for the extinction cross section equal to the ohmic cross section.

Karam, M. A.↗
NASA NTRS1992

Negative-energy states in the Dirac-Hartree-Fock problem - The effect of omission of two-electron integrals involving the small component

The effect of omission of two-electron integrals involving basis functions for the small component of the wavefunction on the eigenvalue spectrum in the Dirac-Hartree-Fock problem is studied. From an analysis of the Fock matrix it is shown that omission of these integrals moves the negative-energy states down, not up. Their complete omission does not give rise to intruder states. The appearance of intruder states occurs when only some of the core integrals are omitted, due to the nature of particular contraction schemes used for the core basis functions. Use of radially localized functions rather than atomic functions alleviates the intruder state problem.

Dyall, Kenneth G.↗
DOE OSTI2019

The effect of atmosphere on the composition of wire arc additive manufactured metal components

The effects of atmospheric contamination on wire arc additively manufactured (WAAM) components were studied by producing AM multilayer parts under controlled conditions. Gas impurity levels were maintained using an argon purge box at levels from atmospheric (210,000 ppm O 2 ) to 1 ppm O 2 , and with corresponding levels of nitrogen. Stainless steel (308L), titanium (Ti–6Al–4V) and pure Ta were studied, each having different affinities for oxygen and nitrogen. Results show that WAAM parts made in air produce unacceptable oxygen and/or nitrogen levels for most applications. However, with moderate purging, all three metals can be deposited by WAAM with compositions similar to the starting wire, and the results are used to provide recommended minimum purge box atmospheres for each metal.

36 MATERIALS SCIENCE↗
NASA NTRS1974

The effect of engine component noise on V/STOL aircraft noise contours

An analytical study of fly-over noise using noise contours to show the effects of varying airplane and path parameters. The method of approach was to synthesize engine component noise spectra and exercise these components along given flight paths to measure the individual and total fly-over effect as a function of noise footprint area. The study was carried out in two phases. Phase 1 utilized a research type aircraft and Phase 2 used an advanced VTOL aircraft. The effect of cross flow was considered for both inlet and exhaust sections of the engine.

Fogg, R. G.↗
DOE OSTI2017

Two-component quantum Hall effects in topological flat bands

Here in this paper, we study quantum Hall states for two-component particles (hardcore bosons and fermions) loading in topological lattice models. By tuning the interplay of interspecies and intraspecies interactions, we demonstrate that two-component fractional quantum Hall states emerge at certain fractional filling factors ν = 1/2 for fermions (ν = 2/3 for bosons) in the lowest Chern band, classified by features from ground states including the unique Chern number matrix (inverse of the K matrix), the fractional charge and spin pumpings, and two parallel propagating edge modes. Moreover, we also apply our strategy to two-component fermions at integer filling factor ν = 2 , where a possible topological Neel antiferromagnetic phase is under intense debate very recently. For the typical π -flux checkerboard lattice, by tuning the onsite Hubbard repulsion, we establish a first-order phase transition directly from a two-component fermionic ν = 2 quantum Hall state at weak interaction to a topologically trivial antiferromagnetic insulator at strong interaction, and therefore exclude the possibility of an intermediate topological phase for our system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1979

Interference effects of aircraft components on the local blade angle of attack of a wing-mounted propeller

The aerodynamic interference effects on a propeller operating in the presence of different wing-body-nacelle combinations was studied. The unsteady blade angle of attack variation with azimuth angle by varying the pitch and yaw of the nacelle was minimized. Results indicate for the particular configuration of interest the minimum blade angle of attack variation occurred with the nacelle pitched downward 4.5 deg and yawed inward 3.0 deg.

Mendoza, J. P.↗
DOE OSTI2020

Degradability of Biodegradable Soil Moisture Sensor Components and Their Effect on Maize (Zea mays L.) Growth

Inexpensive and no-maintenance biodegradable soil moisture sensors could improve existing knowledge on spatial and temporal variability of available soil water at field-scale. Such sensors can unlock the full potential of variable-rate irrigation (VRI) systems to optimize water applications in irrigated cropping systems. The objectives of this study were to assess (i) the degradation of soil moisture sensor component materials and (ii) the effects of material degradation on maize (Zea Mays L.) growth and development. This study was conducted in a greenhouse at Colorado State University, Colorado, USA, by planting maize seeds in pots filled with three growing media (field soil, silica sand, and Promix commercial potting media). The degradation rate of five candidate sensor materials (three blends of beeswax and soy wax, balsa wood, and PHBV (poly(3-hydroxybutyrate-co-3-hydroxyvalerate))) was assessed by harvesting sensor materials at four maize growth stages (30, 60, 90, and 120 days after transplanting). All materials under consideration showed stability in terms of mass and dimension except PHBV. PHBV was degraded entirely within 30 days in soil and Promix, and within 60 days in sand. Balsa wood did now show any significant reduction in mass and dimensions in all growth media. Similarly, there was no significant mass loss across wax blends (p = 0.05) at any growth stage, with a few exceptions. Among the wax blends, 3:1 (beeswax:soy wax) was the most stable blend in terms of mass and dimension with no surface cracks, making it a suitable encapsulant for soil sensor. All materials under consideration did not have any significant effect on maize growth (dry biomass, green biomass, and height) as compared to control plants. These results indicated that 3:1 beeswax:soy wax blend, PHBV, and balsa wood could be suitable candidates for various components of biodegradable soil moisture sensors.

Dahal, Subash (ORCID:0000000205489103)↗
DOE OSTI2016

Laser-assisted simulation of transient radiation effects in heterostructure components based on A{sup III}B{sup V} semiconductor compounds

The possibility of the simulation of transient radiation effects using laser radiation in microwave heterostructure elements based on A{sup III}B{sup V} semiconductor compounds is studied. The results of the laser simulation of transient radiation effects in pseudomorphous high-electron mobility transistors (pHEMTs) based on AlGaAs/InGaAs/GaAs heterostructures are reported. It is shown that, for the adequate simulation of transient effects in devices on GaAs substrates, one should use laser radiation with a wavelength of λ = 880–900 nm taking into account the dominant mechanisms of ionization in the transistor regions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Oxidation of lithium plasma facing components and its effect on plasma performance in the lithium tokamak experiment-β

The characteristics of lithium-coated plasma-facing components (PFCs) have been correlated with plasma performance on the lithium tokamak experiment-β (LTX-β). Previous experiments on LTX showed that the application of lithium to PFCs was needed to achieve higher performance discharges with flat electron temperature profiles and high edge temperatures. Samples that match the LTX-β PFCs were exposed to plasmas before and after PFCs were coated with lithium and transferred under vacuum to a surface analysis station. Measurements using x-ray photoelectron spectroscopy (XPS) revealed that the primary surface constituent was lithium oxide. Earlier XPS analysis of lithium-coated PFCs on LTX was only able to show the presence of surface oxygen. The new XPS data from LTX-β have sufficient resolution to clearly identify lithium compounds for the first time, and enable them to be correlated with how lithium-coated PFCs can reduce impurities and retain hydrogen to reduce recycling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2015

Circadian Effects on Simple Components of Complex Task Performance

The goal of this study was to advance understanding and prediction of the impact of circadian rhythm on aspects of complex task performance during unexpected automation failures, and subsequent fault management. Participants trained on two tasks: a process control simulation, featuring automated support; and a multi-tasking platform. Participants then completed one task in a very early morning (circadian night) session, and the other during a late afternoon (circadian day) session. Small effects of time of day were seen on simple components of task performance, but impacts on more demanding components, such as those that occur following an automation failure, were muted relative to previous studies where circadian rhythm was compounded with sleep deprivation and fatigue. Circadian low participants engaged in compensatory strategies, rather than passively monitoring the automation. The findings and implications are discussed in the context of a model that includes the effects of sleep and fatigue factors.

circadian effects↗