Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Combustion modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Evaluation of a locally homogeneous flow model of spray combustion

A simplified model of spray combustion was evaluated. The model was compared with measurements in both a gaseous propane flame and an air atomized n-pentane spray flame (35 micron Sauter mean diameter). Profiles of mean velocity, temperature, and species concentrations, as well as velocity fluctuations and Reynolds stress, were measured. The predictions for the gas flame were in excellent agreement with measurements, except for product species concentrations where errors due to finite reaction rates were detected. Predictions within the spray were qualitatively correct, but the model overestimated the rate of development of the flow; e.g., predicted flame lengths were 30% shorter than measured. Calibrated drop-life-history calculations showed that finite interphase transport rates caused the discrepancy and that initial drop diameters less than 20 microns would be required for quantitative accuracy of the model.

Mao, C.-P.↗
DOE OSTI2023

Cost-constrained adaptive simulations of transient spray combustion in a gas turbine combustor

Predictive high-fidelity simulations of turbulent spray combustion must capture the combined effects of complex chemistry, multiphase evaporating flow and spray-flame interactions to achieve physical accuracy. Finite-rate chemistry (FRC) combined with a realistic chemical mechanism is a combustion model well-suited for this purpose, but has a high computational cost due to the large number and stiffness of transported chemical species. In contrast, flamelet-based models achieve lower cost by transporting a small number of quantities of reduced stiffness, but assumptions regarding local flame topology, boundary conditions and inter-phase coupling limit their physical accuracy. Recently, the Pareto-efficient combustion (PEC) framework was developed to dynamically assign combustion models based on local cost and accuracy metrics in gas-phase reacting flows. In this work, we extend this PEC framework to spray combustion through the rigorous analysis of the multiphase coupling terms in the governing equations. The derivation shows that spray evaporation causes errors in the prediction of species mass fractions for flamelet-based models due to the sensitivity of the local thermo-chemical state to changes in composition caused by fuel vaporization across combustion regimes present in practical spray combustion devices. Sub-model assignment is formulated as a multiple-choice knapsack problem, where computational cost is directly controlled through the fraction of the domain assigned to the FRC sub-model. The extended PEC formulation is applied to the simulation of a realistic rich-quench-lean gas turbine combustor at steady-state conditions, as well as transient operation resulting in lean blow-out (LBO). Analysis of transient simulations during LBO demonstrates the extended PEC formulation’s capacity to dynamically adapt to changing conditions within the combustor. Transient combustor dynamics are shown to approach convergence with limited increases in computational cost, while retaining substantial computational cost reduction compared to monolithic FRC simulations. Through PEC simulations with increasing fractions of the domain assigned to FRC, monolithic flamelet simulations are shown to over-predict flame stability during LBO. Finally, the extended PEC formulation is thus shown to overcome deficiencies of monolithic models by controlling modeling error for multiphase combustion modeling.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Machine-Learned Manifold-Based Models for Large Eddy Simulation of Turbulent Combustion

Reduced-order manifold combustion models are commonly used to lower the cost of reacting Large Eddy Simulations (LES) and may be derived either from physical principles as in flamelet models or from data-driven methods like Principal Component Analysis (PCA). In either case, neural networks are increasingly used as part of these models to provide a nonlinear mapping between a small set of pre-defined variables that parameterize the manifold and outputs of interest, such as reaction rates. In this work, we propose a new manifold-based modeling approach that combines the definition of the manifold-parameterizing variables (linear combinations of species), the nonlinear mapping to the outputs, and closure of filtered quantities for LES into the structure of a single neural network. This allows the process used to train the neural network to simultaneously optimize both the functional form of the model and the identities of the inputs to the model. The new approach can flexibly incorporate thermochemical data from any combustion system; if trained on data from 1D flames it can be interpreted as an optimized flamelet model, but it can also be used to learn models from data from more complex configurations. This work presents a priori evaluations of the new approach in both contexts. Evaluation using data from 1D premixed flames demonstrates the physical interpretability of the manifold variables generated by the new approach. Evaluation using data from direct numerical simulations of turbulent flames shows improved predictions relative to either flamelet or PCA-based models in a more complex configuration.

47 OTHER INSTRUMENTATION↗
NASA NTRS1992

A two-phase restricted equilibrium model for combustion of metalized solid propellants

An Eulerian-Lagrangian two-phase approach was adopted to model the multi-phase reacting internal flow in a solid rocket with a metalized propellant. An Eulerian description was used to analyze the motion of the continuous phase which includes the gas as well as the small (micron-sized) particulates, while a Lagrangian description is used for the analysis of the discrete phase which consists of the larger particulates in the motor chamber. The particulates consist of Al and Al2O3 such that the particulate composition is 100 percent Al at injection from the propellant surface with Al2O3 fraction increasing due to combustion along the particle trajectory. An empirical model is used to compute the combustion rate for agglomerates while the continuous phase chemistry is treated using chemical equilibrium. The computer code was used to simulate the reacting flow in a solid rocket motor with an AP/HTPB/Al propellant. The computed results show the existence of an extended combustion zone in the chamber rather than a thin reaction region. The presence of the extended combustion zone results in the chamber flow field and chemical being far from isothermal (as would be predicted by a surface combustion assumption). The temperature in the chamber increases from about 2600 K at the propellant surface to about 3350 K in the core. Similarly the chemical composition and the density of the propellant gas also show spatially non-uniform distribution in the chamber. The analysis developed under the present effort provides a more sophisticated tool for solid rocket internal flow predictions than is presently available, and can be useful in studying apparent anomalies and improving the simple correlations currently in use. The code can be used in the analysis of combustion efficiency, thermal load in the internal insulation, plume radiation, etc.

Sabnis, J. S.↗
DOE OSTI2022

Combustion Kinetics Model Development & Fluid Property Experimental Investigation For Improved Design Of Supercritical CO 2 Power Cycle Components

Supercritical carbon dioxide (sCO 2 ) cycles are being investigated for the future of power generation and will contribute to a carbon-neutral future to combat the effects of climate change. These direct-fired closed cycles will produce power without adding significant pollutants to the atmosphere. For such cycles to be efficient, they will need to operate at significantly higher pressures (e.g., 300 atm for Allam Cycle) than existing systems (typically less than 40 atm). There is limited knowledge on combustion at these high pressures and with a high dilution of carbon dioxide. Also, various experimental and computational investigations and model developments have been performed by the University of Central Florida (UCF), Embry-Riddle Aeronautical University (ERAU), and Stanford University (S.U.) to improve the current knowledge base and support the design and development of sCO 2 combustors. This project's technical aspects include chemical kinetics development, fundamental sCO 2 combustion, combustion model and sub-model development, supercritical fluid injection characterization, and heat transfer characterization.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

Development of a high temperature pyrolysis mechanism for cyclopentanone, a potential biofuel derived from biomass

Cyclopentanone (CPO) is a promising biofuel for spark-ignition engines due to its ring strain and high auto-ignition resistance. The Department of Energy has identified CPO as a potential biofuel candidate because of its unique chemical properties. Understanding CPO decomposition is crucial to building a high-temperature combustion model. In this study, we present a comprehensive kinetic model for high-temperature pyrolysis of CPO with verified results from high-pressure shock tube (HPST) measurements. The time histories of carbon monoxide (CO), ethylene (C2H4), and CPO absorbances over the temperature range of 1156-1416 K and 8.53-10.06 atm were measured. A corresponding kinetic model was generated using the Reaction Mechanism Generator (RMG) with the parameters of dominant pathways from either previous studies or quantum calculation within current work. The final model containing 821 species and 79,859 reactions exhibited a good agreement with the experimental results. In this study, the C2H4/CO ratio was used as an essential factor to validate the model and to prove that radical-involved bimolecular pathways were as significant as unimolecular decomposition of CPO. The rate of production (ROP) analysis showed that H radicals play major roles in both primary reactions and product pyrolysis. The insights from this work can be used to generate a better CPO combustion model and help evaluate CPO as a biofuel. Such understanding can also be helpful when proposing pyrolysis or combustion models for other biofuels.

cyclopentanone, reaction mechanism, pyrolysis, sho↗
NASA NTRS2003

Field Effects of Buoyancy on Lean Premixed Turbulent Flames

The study of field effects of buoyancy on premixed turbulent flames is directed towards the advancement of turbulent combustion theory and the development of cleaner combustion technologies. Turbulent combustion is considered the most important unsolved problem in combustion science and laboratory studies of turbulence flame processes are vital to theoretical development. Although buoyancy is dominant in laboratory flames, most combustion models are not yet capable to consider buoyancy effects. This inconsistency has impeded the validation of theories and numerical simulations with experiments. Conversely, the understanding of buoyancy effects is far too limited to help develop buoyant flame models. Our research is also relevant to combustion technology because lean premixed combustion is a proven method to reduce the formation of oxides of nitrogen (NOx). In industrial lean premixed combustion systems, their operating conditions make them susceptible to buoyancy thus affecting heat distribution, emissions, stability, flashback and blowoff. But little knowledge is available to guide combustion engineers as to how to avoid or overcome these problems. Our hypothesis is that through its influence on the mean pressure field, buoyancy has direct and indirect effects on local flame/turbulence interactions. Although buoyancy acts on the hot products in the farfield the effect is also felt in the nearfield region upstream of the flame. These changes also influence the generation and dissipation of turbulent kinetic energy inside the flame brush and throughout the flowfield. Moreover, the plume of an open flame is unstable and the periodic fluctuations make additional contributions to flame front dynamics in the farfield. Therefore, processes such as flame wrinkling, flow acceleration due to heat release and flame- generated vorticity are all affected. Other global flame properties (e.g. flame stabilization limits and flame speed) may all be coupled to buoyancy. This problem poses major challenges to combustion modeling due to its need for a computation domain extending into the farfield and full specifications of upstream, wall and downstream boundary conditions.

Cheng, R. K.↗
NASA NTRS1992

The present state and future directions of PDF methods

The objectives of the workshop are presented in viewgraph format, as is this entire article. The objectives are to discuss the present status and the future direction of various levels of engineering turbulence modeling related to Computational Fluid Dynamics (CFD) computations for propulsion; to assure that combustion is an essential part of propulsion; and to discuss Probability Density Function (PDF) methods for turbulent combustion. Essential to the integration of turbulent combustion models is the development of turbulent model, chemical kinetics, and numerical method. Some turbulent combustion models typically used in industry are the k-epsilon turbulent model, the equilibrium/mixing limited combustion, and the finite volume codes.

Pope, S. B.↗
NASA NTRS1990

Control-oriented modeling of combustion and flow processes in liquid propellant rocket engines

This paper presents a control-oriented model of the flow, reaction, and transport processes in liquid propellant rocket combustion chambers, based on the multicomponent conservation laws of gas dynamics. This model provides a framework for the inclusion of detailed chemical kinetic relations, viscous and other dissipative effects, a variety of actuators and sensors, as well as process and measurement disturbances. In addition to its potential usefulness to the designer in understanding the dynamical complexity of the system and the sources of model uncertainty, the model provides a rigorous basis for control system design. An appraisal of current and feasible actuators and sensors, and their mathematical representation are included.

Bentsman, Joseph↗
DOE OSTI2021

A systematic comparison of machine learning methods for modeling of dynamic processes applied to combustion emission rate modeling

Ten established, data-driven dynamic algorithms are surveyed and a practical guide for understanding these methods generated. Existing Python programming packages for implementing each algorithm are acknowledged, and the model equations necessary for prediction are presented. A case study on a coal-fired power plant’s NO x emission rates is performed, directly comparing each modeling method’s performance on a mutual system. Each model is evaluated by its root mean squared error (RMSE) on out-of-sample future horizon predictions. Optimal hyperparameters are identified using either an exhaustive search or genetic algorithm. The top five model structures of each method are used to recursively predict future NO x emission rates over a 60-step time horizon. The RMSE at each future timestep is determined, and the recursive output prediction trends compared against measurements in time. The GRU neural network is identified as the best candidate for representing the system, demonstrating accurate and stable predictions across the future horizon by all considered models, while satisfactory performance was observed in several of the ARX/NARX formulations. Finally, these efforts have contributed 1) a concise resource of multiple proven dynamic machine learning methods, 2) a practical guide explaining the use of these methods, effectively lowering the “barrier-to-entry” of deploying such models in control systems, 3) a comparison study evaluating each method’s performance on a mutual system, 4) demonstration of accurate multi-timestep emissions modeling suitable for systems-level control, and 5) generalizable results demonstrating the suitability of each method for prediction over a multi-step future horizon to other complex dynamic systems.

42 ENGINEERING↗
NASA NTRS1997

Numerical Modeling for Combustion of Thermoplastic Materials in Microgravity

A time-dependent, three-dimensional model is under development to predict the temperature field, burning rate, and bubble bursting characteristics of burning thermoplastic materials in microgravity. Model results will be compared with experiments performed under microgravity and normal gravity conditions. The model will then be used to study the effects of variations in material properties and combustion conditions on burning rate and combustion behavior.

Butler, Kathryn M.↗
NASA NTRS1979

Review of composite propellant burn rate modeling

Steady-state combustion modeling of composite solid propellants is discussed with emphasis on the Beckstead-Derr-Price (BDP) model. The BDP model and some revisions are considered with respect to the analysis of monomodal ammonium perchlorate/inert binder propellants: topics examined include continuity relations, surface area relations, characteristic surface dimension, flame heights, and energy balance. Application of the BDP model to more complicated propellants containing multiple active ingredients is described. These propellants include multimodal, mixed oxidizer, active binder, aluminized, catalyzed, and nitramine propellants. Example cases of modeling (with comparison to experimental data) are presented, and strengths and weaknesses of current modeling approaches are evaluated.

Cohen, N. S.↗
NASA NTRS1988

Modeling of combustion processes of stick propellants via combined Eulerian-Lagrangian approach

This research is motivated by the improved ballistic performance of large-caliber guns using stick propellant charges. A comprehensive theoretical model for predicting the flame spreading, combustion, and grain deformation phenomena of long, unslotted stick propellants is presented. The formulation is based upon a combined Eulerian-Lagrangian approach to simulate special characteristics of the two phase combustion process in a cartridge loaded with a bundle of sticks. The model considers five separate regions consisting of the internal perforation, the solid phase, the external interstitial gas phase, and two lumped parameter regions at either end of the stick bundle. For the external gas phase region, a set of transient one-dimensional fluid-dynamic equations using the Eulerian approach is obtained; governing equations for the stick propellants are formulated using the Lagrangian approach. The motion of a representative stick is derived by considering the forces acting on the entire propellant stick. The instantaneous temperature and stress fields in the stick propellant are modeled by considering the transient axisymmetric heat conduction equation and dynamic structural analysis.

Kuo, K. K.↗
NASA NTRS1980

Chemical kinetic models for combustion of hydrocarbons and formation of nitric oxide

The formation of nitrogen oxides NOx during combustion of methane, propane, and a jet fuel, JP-4, was investigated in a jet stirred combustor. The results of the experiments were interpreted using reaction models in which the nitric oxide (NO) forming reactions were coupled to the appropriate hydrocarbon combustion reaction mechanisms. Comparison between the experimental data and the model predictions reveals that the CH + N2 reaction process has a significant effect on NO formation especially in stoichiometric and fuel rich mixtures. Reaction models were assembled that predicted nitric oxide levels that were in reasonable agreement with the jet stirred combustor data and with data obtained from a high pressure (5.9 atm (0.6 MPa)), prevaporized, premixed, flame tube type combustor. The results also suggested that the behavior of hydrocarbon mixtures, like JP-4, may not be significantly different from that of pure hydrocarbons. Application of the propane combustion and nitric oxide formation model to the analysis of NOx emission data reported for various aircraft gas turbines showed the contribution of the various nitric oxide forming processes to the total NOx formed.

Jachimowski, C. J.↗
NASA NTRS1992

Analytical flow/thermal modeling of combustion gas flows in Redesigned Solid Rocket Motor test joints

A one-dimensional analytical tool, TOPAZ (Transient One-dimensional Pipe flow AnalyZer), was used to model the flow characteristics of hot combustion gases through Redesigned Solid Rocket Motor (RSRM) joints and to compute the resultant material surface temperatures and o-ring seal erosion of the joints. The capabilities of the analytical tool were validated with test data during the Seventy Pound Charge (SPC) motor test program. The predicted RSRM joint thermal response to ignition transients was compared with test data for full-scale motor tests. The one-dimensional analyzer is found to be an effective tool for simulating combustion gas flows in RSRM joints and for predicting flow and thermal properties.

Woods, G. H.↗
NASA NTRS1991

Computational modelling of dump combustors flowfield

A computational model aimed at predicting the flowfield of dump combustors is presented. The turbulent combustion model is based on the conserved scalar approach and on a convenient specification of its probability density function, which reduces the computation of the mean density to a closed form. Turbulence is modeled by means of the k-epsilon model. The averaged conservation equations are solved by a technique based on a staggered grid and on the SIMPLE solver. The computational model is applied to a simple dump combustor to assess the computer time requirements and accuracy. The turbulent combustion model is shown to reduce the computer time by an order of magnitude when compared to evaluating the mean density by numerical quadrature.

Lentini, D.↗
DOE OSTI2020

Mesh-Sequenced Realizations for Evaluation of Subgrid-Scale Models for Turbulent Combustion

This paper develops a new approach for analysis of subgrid closures for turbulent combustion as modeled using direct quadrature (finite-rate chemistry) techniques. The approach, termed multiresolution analysis through mesh-sequenced realizations (MRA-MSR), conducts simultaneous, constrained large-eddy simulations on a set of hierarchically coarsened meshes. Furthermore, the availability of underlying fine-mesh (subgrid) data corresponding to coarse-mesh locations allows a clearer assessment of the effects of unresolved fluctuations on apparent reactivity. A key to MRA-MSR is the correlation of eddy structures at coarser mesh levels, which is facilitated by the transfer of filtered fine-mesh velocity information. A seven-mesh MRA-MSR hierarchy using three resolution levels is applied to one of the Sydney bluff-body stabilized methane–hydrogen flames. Analysis of the simultaneously evolved data at different resolution levels reveals several interesting trends. First, at high Damköhler numbers, there is clear evidence of attenuation of apparent reactivity due to the effects of unresolved fluctuations. Secondly, single-point, single-time filtered density functions of a normalized subgrid Damköhler number show a characteristic beta probability density function (PDF) form and display evidence of scale similarity. Interrogation of the MRA-MSR database also shows that the recently-proposed least-squares minimization (LSM) turbulence–chemistry interaction model can account for the observed diminishment in reactivity at high Damköhler numbers but cannot reduce scatter significantly. A new form of the LSM model, which makes use of the normalized subgrid Damköhler number beta PDF distribution, performs slightly better than the original model, illustrating the potential of MRA-MSR both in assessing existing closure concepts and in developing new ones.

42 ENGINEERING↗