Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Color centers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Comparison of Multispectral Imaging and Traditional Fundoscopy in the Detection of Terrestrial Retinal and Optic Nerve Pathologies like those Encountered During and/or Immediately Following Long-Duration Spaceflight

INTRODUCTION: The purpose of this investigation was to evaluate if MultiColor Imaging (MCI) can replace color fundus photography (CFP) as a diagnostic screening tool during spaceflight. MCI significantly reduces crew time (approx. 115 minutes/session, 36 hours/year) by eliminating nominal on-orbit fundoscopy sessions, while also providing the option to capture a larger field of view (55 vs. 35). METHODS: A comprehensive PubMed literature search was conducted using the following key words: multicolor, multispectral, imaging, retina, choroid, optic nerve, optic disc, and papilledema. Publications were filtered based on optic nerve and chorioretinal pathologies matching those seen during or immediately after spaceflight: optic disc edema (ODE), cotton wool spots (CWS), retinal hemorrhage, pigment epithelial detachment (PED), and serous chorioretinopathy (SCR). In a separate effort, 44 multicolor images (30 abnormal) of terrestrial patients were graded and compared to corresponding color fundus images acquired at the Doheny Eye Centers and UCLA. RESULTS: The search identified 340 articles; 9 describing MCI in relevant pathologies, 6 comparing MCI to CFP. MCI is superior in detecting CWS (1 paper), PED (2 papers), retinal hemorrhages (2 papers), and choroidal folds (1 paper), and can better delineate extent or boundaries of subretinal fluid and identify areas of RPE damage in SCR (2 papers). On MCI, ODE was described as a hyperreflective ring with a green shift and indistinct disc margins, with equaldetectability as using CFP (3 papers). Grading at Doheny Eye Institute confirmed these findings. DISCUSSION: MCI can effectively detect all retinal and optic nerve findings detectable by CFP during and immediately post-spaceflight and represents a suitable replacement as an on-orbit diagnostic screening tool. Additionally, by eliminating the nominal on-orbit fundoscopy sessions, dozens of crew hours are spared per year by utilizing MCI.

Jorge Nagel↗
NASA NTRS2016

Pick and Eat Crop Testing: Dwarf Tomato and Pepper as Candidate Space Crops

Several dwarf tomato and pepper varieties were evaluated under International Space Station (ISS)-simulated growth conditions (22 degrees Centigrade, 50 percent relative humidity, 1500 parts per million CO2, and 300 micromoles per square meter per second of light for 16 hours per day) with the goal of selecting those with the best growth, nutrition, and organoleptic potential for use in a pick and eat salad crop system on ISS and future exploration flights. Testing included six cultivars of tomato (Red Robin, Scarlet Sweet 'N' Neat, Tiny Tim, Mohamed, Patio Princess, and Tumbler) and six cultivars of pepper (Red Skin, Fruit Basket, Cajun Belle, Chablis, Sweet Pickle, and Pompeii). Plants were grown to an age sufficient to produce fruit (up to 106 days for tomato and 109 days for pepper) using Turface (arcillite) potting media with 18-6-8 control-release fertilizer and supplemental nutrient solution beginning around 60-days-age. Tomato fruits were harvested when they showed full red color, beginning around 70-days age and then at weekly intervals thereafter, while peppers were grown until fruits showed color and were harvested twice (first test) and just once at the end of the second test, with the final harvests including colored and green fruit. Plant sizes, yields, and nutritional attributes were measured and used to down-select to three cultivars for each species. In particular, we were interested in cultivars that were short (dwarf) but still produced high yields. Nutritional data included elemental (Ca, Mg, Fe, and K) content, vitamin K, phenolics, lycopene (for tomato), anthocyanin, lutein, and zeaxanthin. The three down-selected cultivars for each species were grown again and the harvested fruit sent to NASA's Johnson Space Center for sensory evaluation, which included overall acceptability, appearance, color intensity, aroma, flavor and texture. The combined data were compared and given weighting factors to rank the cultivars as candidates for testing in space. Weightings gave maximum importance to plant size (smaller being good) and fruit yield (greater yields being good). For tomato, the ranking was 1) cultivar Mohamed and cultivar Red Robin (tied), and 3) cultivar Sweet N' Neat. For pepper, the ranking was 1) cultivar Pompeii, 2) cultivar Red Skin, and 3) cultivar Fruit Basket. These rankings are somewhat subjective but provide a starting point for conducting higher fidelity testing with these crops (e.g., testing with light emitting diode lighting similar to the Veggie plant unit on ISS), and ultimately conducting a flight experiment.

Food↗
NASA NTRS1999

Space Environmental Effects on Colored Coatings and Anodizes

Colored coatings and anodizes are used on spacecraft as markers and astronaut visual aids. These materials must be stable in the space environment and withstand atomic oxygen, ultraviolet radiation, particulate radiation, thermal cycling, and high vacuum without significant change in optical and mechanical properties. A variety of colored coatings and anodizes have been exposed to simulated space environments at Marshall Space Flight Center and also actual space environment as part of the Passive Optical Sample Assembly (POSA) - I flight experiment. Colored coatings were developed by AZ Technology, Huntsville, AL, under a NASA contract for International Space Station (ISS). These include yellow, red, blue, and black paints suitable for Extra-Vehicular Activity (EVA) visual aids and ISS emblems. AaChron, Inc., Minneapolis, MN, developed stable colored anodizes, also in yellow, red, blue, and black, for astronaut visual aids. These coatings were exposed in the laboratory to approximately 550 equivalent sun-hours of solar ultraviolet radiation and approximately 1 x 10(exp 21) atoms/sq cm of atomic oxygen in vacuum. The AZ Technology yellow colored coating, designated TMS800IY, and all four AaChron colored anodizes were flown on POSA-I. POSA-I was a Risk Mitigation Experiment for ISS. It was attached to the exterior of the Mir space station docking module by EVA and was exposed for 18 months. The laboratory-simulated space environment, the natural space environment and the unique environment of an orbiting, active space station and their effects on these developmental materials are discussed.

Kamenetzky, Rachel R.↗
NASA NTRS1993

Ocean Observation Instrument

The Airborne Ocean Color Imager (AOCI) was developed by Daedalus Enterprises, Inc. for Ames Research Center under a Small Business Innovation Research (SBIR) contract as a simulator for an advanced oceanographic satellite instrument. The instrument measures water temperature and detects water color in nine wavelengths. Water color indicates chlorophyll content or phytoplankton. After EOCAP assistance and technical improvements, the AOCI was successfully commercialized by Daedalus Enterprises, Inc. One version provides commercial fishing fleets with information about fish locations, and the other is used for oceanographic research.

Source record↗
NASA NTRS1984

NIMBUS-7 CZCS. Coastal Zone Color Scanner Imagery for Selected Coastal Regions. North America - Europe. South America - Africa - Antarctica. Level 2 Photographic Product

The Nimbus-7 Coastal Zone Color Scanner (CZCS) is the first spacecraft instrument devoted to the measurement of ocean color. Although instruments on other satellites have sensed ocean color, their spectral bands, spatial resolution, and dynamic range were optimized for geographical or meteorological use. In the CZCS, every parameter is optimized for use over water to the exclusion of any other type of sensing. The signal-to-noise ratios in the spectral channels sensing reflected solar radiance are higher than those required in the past. These ratios need to be high because the ocean is such a poor reflecting surface that the majority of the signal seen by the reflected energy channels at spacecraft altitudes is backscattered solar radiation from the atmosphere rather than reflected solar energy from the ocean. The CZCS is a conventional multichannel scanning radiometer utilizing a rotating plane mirror at a 45 deg angle to the optic axis of a Cassegrain telescope. The mirror scans 360 deg; however, only 80 deg of data centered on the spacecraft nadir is collected for ocean color measurements. Spatial resolution at spacecraft nadir is 825x825 m with some degradation at the edges of the scan swath. The useful swath width from a spacecraft altitude of 955 km is 1600 km.

Source record↗
NASA NTRS1988

Global color and albedo variations on Io

The present Voyager imaging data multispectral mosaics of Io include global mosaics from each of the Voyager 1 and 2 data sets and a high-resolution mosaic of the region centered on the Ra Patera volcano. The constancy of the disk-integrated color and albedo of Io over recent decades despite volcanic activity may be due to the regular occurrence of large Pele-type plumes with relatively dark, red deposits. Io's intrinsic spectral variability involves continuous variation among three major spectral end members. Attention is given to the mapping of the data into five spectral units for the purposes of comparison with laboratory measurements of Io surface material candidates.

Mcewen, Alfred S.↗
NASA NTRS1994

Applying Costs, Risks and Values Evaluation (CRAVE) methodology to Engineering Support Request (ESR) prioritization

Given limited budget, the problem of prioritization among Engineering Support Requests (ESR's) with varied sizes, shapes, and colors is a difficult one. At the Kennedy Space Center (KSC), the recently developed 4-Matrix (4-M) method represents a step in the right direction as it attempts to combine the traditional criteria of technical merits only with the new concern for cost-effectiveness. However, the 4-M method was not adequately successful in the actual prioritization of ESRs for the fiscal year 1995 (FY95). This research identifies a number of design issues that should help us to develop better methods. It emphasizes that given the variety and diversity of ESR's one should not expect that a single method could help in the assessment of all ESR's. One conclusion is that a methodology such as Costs, Risks, and Values Evaluation (CRAVE) should be adopted. It also is clear that the development of methods such as 4-M requires input not only from engineers with technical expertise in ESR's but also from personnel with adequate background in the theory and practice of cost-effectiveness analysis. At KSC, ESR prioritization is one part of the Ground Support Working Teams (GSWT) Integration Process. It was discovered that the more important barriers to the incorporation of cost-effectiveness considerations in ESR prioritization lie in this process. The culture of integration, and the corresponding structure of review by a committee of peers, is not conducive to the analysis and confrontation necessary in the assessment and prioritization of ESR's. Without assistance from appropriately trained analysts charged with the responsibility to analyze and be confrontational about each ESR, the GSWT steering committee will continue to make its decisions based on incomplete understanding, inconsistent numbers, and at times, colored facts. The current organizational separation of the prioritization and the funding processes is also identified as an important barrier to the pursuit of cost-effectiveness. Perhaps the greatest barrier is that, at the working level, KSC's culture is so preoccupied with technical concerns that it seems almost oblivious to any cost concerns, let alone cost-effectiveness concerns. It is recommended that we must urgently begin to change that culture and seek a better balance between these two concerns.

Joglekar, Prafulla N.↗
NASA NTRS1992

Further evidence for a color gradient in M15

Using data obtained at the Canada-France-Hawaii Telescope (CFHT) in subarcsecond seeing color maps are constructed in B - V and H-alpha - R of the central regions of the globular cluster M15. Comparison in B - V of the region within 0.31 pc of the cluster center with a coadded sample taken from the surrounding region demonstrates a color gradient, in the sense that the central region is bluer than the surrounding region at a high level of statistical significance. Analysis of the H-alpha - R color map indicates that the central region is 'H-alpha deficient', i.e., has a stronger H-alpha absorption line on average than the coadded region. This result argues against the possibility that the excess blue light from the central region is due to cataclysmic variables. Instead, two possible causes of the color gradient are (1) it may be due to a centrally concentrated population of faint blue stars, possibly resulting from binary-single star interactions, and (2) it may result from a central deficit of low-mass main-sequence stars.

Cederbloom, S. E.↗
NASA NTRS1983

Surface density of quasars in two high-latitude fields

Fourty-four objects selected for ultraviolet excess have been identified spectroscopically. The objects lie in two Palomar 1.2 m Schmidt fields in the north galactic polar cap, one of 7.7 sq deg centered on Kapteyn Selected Area 29, the other of 36 sq deg centered on SA 55. The objects are characterized by Color Classes (CC) 1A, 1, 1B, 1C, 2, and 3. Quasars comprise 75 percent of the CC 1A objects and 44 percent of the objects in the SA 29 field. Twelve quasars in the SA 29 field comprise a complete sample to B = 18.5 mag, and given an uncorrected surface density of 1.6 quasars/sq deg. This value is essentially that derived by Sandage (1969). Corrections are applied to account for the lack of high redshift quasars. An empirical correction is derived to account for lack of simultaneity in selection and photometry. A corrected lower limit to the surface density is estimated to be 1.85 quasars/sq deg to B = 18.5 mag.

Usher, P. D.↗
NASA NTRS1986

Radiometric responsivity determination for Feature Identification and Location Experiment (FILE) flown on space shuttle mission

A procedure was developed to obtain the radiometric (radiance) responsivity of the Feature Identification and Local Experiment (FILE) instrument in preparation for its flight on Space Shuttle Mission 41-G (November 1984). This instrument was designed to obtain Earth feature radiance data in spectral bands centered at 0.65 and 0.85 microns, along with corroborative color and color-infrared photographs, and to collect data to evaluate a technique for in-orbit autonomous classification of the Earth's primary features. The calibration process incorporated both solar radiance measurements and radiative transfer model predictions in estimating expected radiance inputs to the FILE on the Shuttle. The measured data are compared with the model predictions, and the differences observed are discussed. Application of the calibration procedure to the FILE over an 18-month period indicated a constant responsivity characteristic. This report documents the calibration procedure and the associated radiometric measurements and predictions that were part of the instrument preparation for flight.

Wilson, R. G.↗
NASA NTRS1989

Computational fluid dynamics analysis of space shuttle main propulsion feed line 17-inch disconnect valves

A steady incompressible three-dimensional (3-D) viscous flow analysis was conducted for the Space Shuttle Main Propulsion External Tank (ET)/Orbiter (ORB) propellant feed line quick separable 17-inch disconnect flapper valves for liquid oxygen (LO2) and liquid hydrogen (LH2). The main objectives of the analysis were to predict and correlate the hydrodynamic stability of the flappers and pressure drop with available water test data. Computational Fluid Dynamics (CFD) computer codes were procured at no cost from the public domain, and were modified and extended to carry out the disconnect flow analysis. The grid generator codes SVTGD3D and INGRID were obtained. NASA Ames Research Center supplied the flow solution code INS3D, and the color graphics code PLOT3D. A driver routine was developed to automate the grid generation process. Components such as pipes, elbows, and flappers can be generated with simple commands, and flapper angles can be varied easily. The flow solver INS3D code was modified to treat interior flappers, and other interfacing routines were developed, which include a turbulence model, a force/moment routine, a time-step routine, and initial and boundary conditions. In particular, an under-relaxation scheme was implemented to enhance the solution stability. Major physical assumptions and simplifications made in the analysis include the neglect of linkages, slightly reduced flapper diameter, and smooth solid surfaces. A grid size of 54 x 21 x 25 was employed for both the LO2 and LH2 units. Mixing length theory applied to turbulent shear flow in pipes formed the basis for the simple turbulence model. Results of the analysis are presented for LO2 and LH2 disconnects.

Kandula, Max↗
NASA NTRS1996

Images of Earth and Space: The Role of Visualization in NASA Science

Fly through the ocean at breakneck speed. Tour the moon. Even swim safely in the boiling sun. You can do these things and more in a 17 minute virtual journey through Earth and space. The trek is by way of colorful scientific visualizations developed by the NASA/Goddard Space Flight Center's Scientific Visualization Studio and the NASA HPCC Earth and Space Science Project investigators. Various styles of electronic music and lay-level narration provide the accompaniment.

Source record↗
NASA NTRS1994

Citrus Inventory

An aerial color infrared (CIR) mapping system developed by Kennedy Space Center enables Florida's Charlotte County to accurately appraise its citrus groves while reducing appraisal costs. The technology was further advanced by development of a dual video system making it possible to simultaneously view images of the same area and detect changes. An image analysis system automatically surveys and photo interprets grove images as well as automatically counts trees and reports totals. The system, which saves both time and money, has potential beyond citrus grove valuation.

Source record↗
NASA NTRS2001

Portable Instrument to Measure CDOM Light Absorption in Aquatic Systems: WPI Success Story

World Precision Instruments, Inc. (WPI), of Sarasota, FL, in collaboration with NASA's John C. Stennis Space Center, has developed an innovative instrument to accurately measure Colored Dissolved Organic Matter (CDOM) absorption in the field. This successful collaboration has culminated in an exciting new device, called the UltraPath, now commercially available through WPI. Traditional methods of measuring absorption of dissolved materials require special handling and storage prior to measurement. Use of laboratory spectrophotometers as the measuring devices have proven time consuming, cumbersome, and delicate to handle. The UltraPath provides a low-cost, highly sensitive, rugged, portable system that is capable of high sensitivity measurements in widely divergent waters.

Source record↗
NASA NTRS1976

High-resolution far-infrared observations of the galactic center

A map at 53 microns with 17-arcsec resolution and three-color observations at 53, 100, and 175 microns with 30-arcsec beams of Sgr A are presented. Sagittarius A is resolved into two main sources, one associated with the cluster of strong 10-micron sources and another about 45 arcsec to the southwest coincident with a weak 10-micron source. The dust temperature peaks near the strong 10-micron sources, but the 100-micron and 175-micron fluxes and the far-infrared optical depth are greatest near the southwest source. The amount of dust required to explain the far-infrared emission is comparable to that observed in absorption in the near-infrared.

Harvey, P. M.↗
NASA NTRS2003

Satellite Ocean-Color Validation Using Ships of Opportunity

The investigation s main objective is to collect from platforms of opportunity (merchant ships, research vessels) concomitant normalized water-leaving radiance and aerosol optical thickness data over the world s oceans. A global, long-term data set of these variables is needed to verify whether satellite retrievals of normalized water-leaving radiance are within acceptable error limits and, eventually, to adjust atmospheric correction schemes. To achieve this objective, volunteer officers, technicians, and scientists onboard the selected ships collect data from portable SIMBAD and Advanced SIMBAD (SIMBADA) radiometers. These instruments are specifically designed for evaluation of satellite-derived ocean color. They measure radiance in spectral bands typical of ocean-color sensors. The SIMBAD version measures in 5 spectral bands centered at 443, 490, 560, 670, and 870 nm, and the Advanced SIMBAD version in 11 spectral bands centered at 350, 380, 412, 443, 490, 510, 565, 620, 670, 750, and 870 nm. Aerosol optical thickness is obtained by viewing the sun disk like a classic sun photometer. Normalized water-leaving radiance, or marine reflectance, is obtained by viewing the ocean surface through a vertical polarizer in a specific geometry (nadir angle of 45o and relative azimuth angle of 135deg) to minimize direct sun glint and reflected sky radiation. The SIMBAD and SIMBADA data, after proper quality control and processing, are delivered to the SIMBIOS project office for inclusion in the SeaBASS archive. They complement data collected in a similar way by the Laboratoire d'Optique Atmospherique of the University of Lille, France. The SIMBAD and SIMBADA data are used to check the radiometric calibration of satellite ocean-color sensors after launch and to evaluate derived ocean-color variables (i.e., normalized water-leaving radiance, aerosol optical thickness, and aerosol type). Analysis of the SIMBAD and SIMBADA data provides information on the accuracy of satellite retrievals of normalized water-leaving radiance, an understanding of the discrepancies between satellite and in situ data, and algorithms that reduce the discrepancies, contributing to more accurate and consistent global ocean color data sets.

Frouin, Robert↗
NASA NTRS2008

Reversible Chemochromic Hydrogen Detectors

The Florida Solar Energy Center (FSEC), affiliated with the University of Central Florida, has invented a reversible pigment that changes from light beige to blue when exposed to hydrogen and back to light beige when exposed to atmospheric oxygen. In laboratory and environmental studies, the FSEC pigment in its tape form failed to change color adequately when exposed to hydrogen after one day of exposure at Kennedy Space Center's Beach Corrosion Test Facility. The reversible hydrogen-detecting tape also lost its ability to change color after being placed in an environmental chamber at 45 C for one day. The first attempts at extruding the reversible pigment into various polymers were unsuccessful because of the pigment's poor thermal stability. The goal of this project was to formulate a pigment with improved thermal and environmental stability for extrusion into a variety of appropriate polymer matrices. The formulation of the reversible hydrogen-detecting pigment was modified by removing one reagent and chemically modifying the hydrogen sensitive ingredient. This was intended to improve the hydrophobicity of the pigment and alter the thermal degradation mechanism.

Source record↗
NASA NTRS1988

Nonselective enrichment for yeast adenine mutants by flow cytometry

The expression of certain adenine biosynthetic mutations in the yeast Saccharomyces cerevisiae results in a red colony color. This phenomenon has historically provided an ideal genetic marker for the study of mutation, recombination, and aneuploidy in lower eukaryotes by classical genetic analysis. In this paper, it is reported that cells carrying ade1 and/or ade2 mutations exhibit primary fluorescence. Based on this observation, the nonselective enrichment of yeast cultures for viable adenine mutants by using the fluorescence-activated cell sorter has been achieved. The advantages of this approach over conventional genetic analysis of mutation, recombination, and mitotic chromosomal stability include speed and accuracy in acquiring data for large numbers of clones. By using appropriate strains, the cell sorter has been used for the isolation of both forward mutations and chromosomal loss events in S. cerevisiae. The resolving power of this system and its noninvasiveness can easily be extended to more complex organisms, including mammalian cells, in which analogous metabolic mutants are available.

Non-NASA Center↗