Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Colloidal systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Nonequilibrium design strategies for functional colloidal assemblies

Here, we use a nonequilibrium variational principle to optimize the steady-state, shear-induced interconversion of self-assembled nanoclusters of DNA-coated colloids. Employing this principle within a stochastic optimization algorithm allows us to identify design strategies for functional materials. We find that far-from-equilibrium shear flow can significantly enhance the flux between specific colloidal states by decoupling trade-offs between stability and reactivity required by systems in equilibrium. For isolated nanoclusters, we find nonequilibrium strategies for amplifying transition rates by coupling a given reaction coordinate to the background shear flow. We also find that shear flow can be made to selectively break detailed balance and maximize probability currents by coupling orientational degrees of freedom to conformational transitions. For a microphase consisting of many nanoclusters, we study the flux of colloids hopping between clusters. We find that a shear flow can amplify the flux without a proportional compromise on the microphase structure. This approach provides a general means of uncovering design principles for nanoscale, autonomous, functional materials driven far from equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Voltage-controlled reversible modulation of colloidal quantum dot thin film photoluminescence

Active modulation of quantum dot thin film photoluminescence (PL) has been far-reaching potential applications in biomedical and optoelectronic systems, but challenges remain in achieving large PL modulation depth and fast temporal response. Here, we report an efficient voltage-controlled optical down-converter by optically exciting a colloidal quantum dot thin film within a quantum dot light-emitting diode under reverse bias. Utilizing field-induced luminescence quenching, we show that a large electric field can strongly modify carrier dynamics in this nanostructured device, resulting in stable and reversible photoluminescence quenching. The device exhibits photoluminescence reduction of up to 99.5%, corresponding to a contrast ratio of 200:1 under the applied electric field of 3 MV cm -1 with a 300 ns response time. Using excitation wavelength dependent and transient PL spectroscopy, we further show that the high degree of quenching is achieved by a synergistic interplay of quantum-confined Stark effect and field-induced exciton dissociation.

42 ENGINEERING↗
DOE OSTI2021

Polar state reversal in active fluids

Spontaneous emergence of correlated states such as flocks and vortices is a prime example of collective dynamics and self-organization observed in active matter. In geometrically confined systems, the formation of globally correlated polar states proceeds through the emergence of a macroscopic steadily rotating vortex, which spontaneously selects a clockwise or counterclockwise global chiral state. In this work, we reveal that a global vortex formed by colloidal rollers exhibits polar state reversal and that a subsequent formation of the collective states upon re-energizing the system is not random. We combine experiments and simulations to elucidate how a combination of hydrodynamic and electrostatic interactions leads to hidden asymmetries in the local particle positional order, reflecting the chiral state of the system. These asymmetries can be exploited to systematically command subsequent polar states of active liquids through temporal control of the activity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Unveiling the Structure and Dynamics of Water Confined in Colloidal Boehmite Suspensions

Thin fluid layers confined between nanoparticles play an important role in several natural and industrial systems, including radioactive wastes stored in tanks at the U.S. Department of Energy’s Hanford site. Multimodal neutron and computational approaches have been integrated to examine the properties of one, two, and four layers of water (H 2 O or D 2 O) on nanoparticulate, hydrous, or deuterated boehmite (γ-AlOOH or γ-AlOOD). Exposure of deuterated boehmite to H 2 O at 90 °C yielded rapid H/D isotopic exchange likely driven by a Grotthus-like proton-hopping mechanism. The in-plane and out-of-plane vibrations of the structural hydroxyls involved in this exchange were observed for both the hydrated and deuterated boehmite. These observations were confirmed by molecular dynamics simulations that also showed that single water molecules on the (010) surface bond to the structure via four bonds: two from hydrogens (deuteriums) on the water to surrounding oxygens and two from the water’s oxygen to surrounding OD/OH. Bulk water-like properties began to appear once four monolayers of water had been added, but steric crowding limited water diffusion rates once two monolayers had been added. The super-Arrhenius temperature dependence observed at four monolayers indicated glass-like behavior in a well-formed hydrogen-bonding network. Such a network is not sufficiently developed, however, when the surface water coverage is less than four layers. In conclusion, the unique nature of these layers can provide critical information for understanding forces between particles in proximity, and resultant effects on suspension rheology.

Anovitz, Lawrence M. [Oak Ridge National Laborator↗
DOE OSTI2024

Non-classical crystallization in soft and organic materials

Classical nucleation and crystal growth theories describe how nuclei form, become stable after reaching a critical size and then enlarge through monomer attachment. More than two decades ago, non-classical pathways have been proposed for various types of (bio)molecules and materials, which can substantially alter the crystallization kinetics and outcomes. Direct observation of non-classical crystallization of inorganic nanomaterials, including metastable structure-mediated and particle attachment-based pathways that usually occur on the nanoscale, was enabled by in situ liquid-phase electron microscopy. However, it was not until recently that the crystallization dynamics of beam-sensitive soft materials were directly imaged with sufficient spatial resolution, and a level of microstructural understanding of defects and interfaces emerged. This article provides a high-level review of the non-classical crystallization pathways discovered in soft and organic materials and a forward-looking guide for future research. We first analyse how the characteristics of soft materials affect their crystallization pathways and kinetics. We then identify technical approaches to studying the crystallization trajectories of soft materials and discuss strategies to properly select and apply them to different systems. Breakthroughs made in understanding the crystallization of small organic molecules, (bio)macromolecules, colloids and reticular framework materials are examined. Lastly, we provide an outlook on the challenges in elucidating soft material crystallization pathways and the opportunities for assisting the design and synthesis of new materials and structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bridging microscopic dynamics and rheology in the yielding of charged colloidal suspensions

The yielding of soft materials is critical to many natural and industrial processes, yet experimental insights into microscopic aspects of yielding are limited. This study combines angle X-ray scattering, X-ray photon correlation spectroscopy, and in situ rheology (Rheo-SAXS-XPCS) with fast lubrication dynamics simulations to examine how interparticle interactions influence yielding in charged colloidal suspensions. By tuning attraction through salt addition, we compare repulsive and attractive systems under deformation. Repulsive suspensions yield uniformly with Andrade-like creep and minimal structural change. In contrast, attractive suspensions show complex behaviors, including shear banding, delayed yielding, and resolidification, governed by transient dynamics at shear band interfaces. These results directly link microscopic particle dynamics to macroscopic flow and demonstrate how interaction potentials control rheological behavior. This work offers a framework for designing soft materials with tailored properties for applications in coatings, food processing, drug delivery, and other technologies requiring precise mechanical control.

Molecular Dynamics Simulation↗
DOE OSTI2022

Mass Changes the Diffusion Coefficient of Particles with Ligand-Receptor Contacts in the Overdamped Limit

Inertia does not generally affect the long-time diffusion of passive overdamped particles in fluids. Yet a model starting from the Langevin equation predicts a surprising property of particles coated with ligands that bind reversibly to surface receptors: heavy particles diffuse more slowly than light ones of the same size. We show this by simulation and by deriving an analytic formula for the mass-dependent diffusion coefficient in the overdamped limit. We estimate the magnitude of this effect for a range of biophysical ligand-receptor systems, and find it is potentially observable for tailored micronscale DNA-coated colloids.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Probing the Self-Assembly dynamics of cellulose nanocrystals by X-ray photon correlation spectroscopy

Charge-stabilized colloidal cellulose nanocrystals (CNCs) can self-assemble into higher-ordered chiral nematic structures by varying the volume fraction. The assembly process exhibits distinct dynamics during the isotropic to liquid crystal phase transition, which can be elucidated using X-ray photon correlation spectroscopy (XPCS). Anionic CNCs were dispersed in propylene glycol (PG) and water spanning a range of volume fractions, encompassing several phase transitions. Coupled with traditional characterization techniques, XPCS was conducted to monitor the dynamic evolution of the different phases. Additionally, simulated XPCS results were obtained using colloidal rods and compared with the experimental data, offering additional insights into the dynamic behavior of the system. The results indicate that the particle dynamics of CNCs undergo a stepped decay in three stages during the self-assembly process in PG, coinciding with the observed phases. The phase transitions are associated with a total drop of Brownian diffusion rates by four orders of magnitude, a decrease of more than a thousand times slower than expected in an ideal system of repulsive Brownian rods. Given the similarity in the phase behaviors in CNCs dispersed in PG and in water, we hypothesize that these dynamic behaviors can be extrapolated to other polar solvent environments. Importantly, these findings represent the direct measurement of CNC dynamics using XPCS, underscoring the feasibility of directly assessing the dynamic behavior of other rod-like colloidal suspensions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High Temperature, Isothermal Growth Promotes Close Packing and Thermal Stability in DNA-Engineered Colloidal Crystals

Here, we report a strategy to accelerate the synthesis and increase the crystallinity of colloidal crystals engineered with DNA. Specifically, by holding the DNA-modified Au particle building blocks above the T m of the individual nanoparticle building blocks, but slightly below the T m of the anticipated colloidal crystal during the assembly process, crystallinity is increased, and enthalpically-favored phases with high degrees of facet registration are observed. We studied the utility of this approach with systems for which the commonly adopted slow-cooling approach yielded primarily amorphous aggregates. In particular, we used it to synthesize high-volume fraction colloidal crystals from large (80 nm) anisotropic nanoparticles (cubes and rhombic dodecahedra) with short (<14 nm) DNA designed to restrict the degrees of freedom for the DNA bonds and maintain the anisotropy of the particle building block. Small-angle X-ray scattering and electron microscopy studies show that the crystalline phases synthesized via this method are more thermally stable than their corresponding aggregate phases, likely due to an increased number of DNA-DNA bonds between particles. Crystal size tunability (between 0.5 and 15 µm edge lengths) and epitaxial growth were demonstrated using this strategy by modulating the NaCl concentration in tandem with previously synthesized colloidal crystal nuclei. Taken together, this isothermal strategy provides a route to deliberately crystallize a wide variety of anisotropic colloidal materials and expands the phase space accessible to nanoparticles modified with DNA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Arrested coarsening and large density fluctuations in driven particle mixtures in two dimensions

Abstract Using molecular dynamics simulations, we study a driven, nonadditive binary mixture of spherical particles confined to move in two dimensions and immersed in an explicit solvent consisting of point particles with purely repulsive interactions. We show that, without a drive, the mixture of spherical particles phase separates and coarsens with kinetics consistent with an Ising-like conserved dynamics. Conversely, when the drive is applied, the coarsening is arrested and the system develops large density fluctuations. We show that the drive creates domains of a characteristic size which decreases with an increasing force. Furthermore, we find that these domains are anisotropic and can be oriented either parallel or perpendicular to the drive direction. Finally, we connect our findings to existing theories of strongly-driven systems, pointing out the importance of introducing the explicit solvent particles to break the Galilean invariance of the system.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Enhancing nanoscale charged colloid crystallization near a metastable liquid binodal

Achieving predictive control over crystallization using non-classical nucleation while avoiding kinetic traps would be a step towards designing materials with new functionalities. We address these challenges by inducing the bottom-up assembly of nanocrystals into ordered arrays, or superlattices. Using electrostatics—rather than density—to tune the interactions between particles, we watch self-assembly proceed through a metastable liquid phase. Here, we systematically investigate the phase behaviour as a function of quench conditions in situ and in real time using small-angle X-ray scattering. By fitting to colloid, liquid and superlattice models, we extract the time evolution of each phase and the system phase diagram, which we find to be consistent with short-range attractive interactions. Using the predictive power of the phase diagram, we establish control of the self-assembly rate over three orders of magnitude, and we identify one- and two-step self-assembly regimes, with only the latter implicating the metastable liquid as an intermediate. The presence of the metastable liquid increases the superlattice formation rate relative to the equivalent one-step pathway, and the superlattice order increases with the rate, revealing a generalizable kinetic strategy for promoting and enhancing ordered assembly.

Tanner, Christian P. N. [University of California,↗
DOE OSTI2023

Colloidal superionic conductors

Nanoparticles with highly asymmetric sizes and charges that self-assemble into crystals via electrostatics may exhibit behaviors reminiscent of those of metals or superionic materials. Here, we use coarse-grained molecular simulations with underdamped Langevin dynamics to explore how a binary charged colloidal crystal reacts to an external electric field. As the field strength increases, we find transitions from insulator (ionic state), to superionic (conductive state), to laning, to complete melting (liquid state). In the superionic state, the resistivity decreases with increasing temperature, which is contrary to metals, yet the increment decreases as the electric field becomes stronger. Additionally, we verify that the dissipation of the system and the fluctuation of charge currents obey recently developed thermodynamic uncertainty relation. Our results describe charge transport mechanisms in colloidal superionic conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Kibble-Zurek mechanism for nonequilibrium phase transitions in driven systems with quenched disorder

Abstract We show that the Kibble-Zurek mechanism applies to nonequilibrium phase transitions found in driven assemblies of superconducting vortices and colloids moving over quenched disorder where a transition occurs from a plastic disordered flowing state to a moving anisotropic crystal. We measure the density of topological defects as a function of quench rate through the nonequilibrium phase transition, and find that on the ordered side of the transition, the topological defect density ρ d scales as a power law, $${\rho }_{{{{{{{{\rm{d}}}}}}}}}\propto 1/{t}_{{{{{{{{\rm{q}}}}}}}}}^{\beta }$$ ρ d ∝ 1 / t q β , where t q is the quench time duration, consistent with the Kibble-Zurek mechanism. We show that scaling with the same exponent holds for varied strengths of quenched disorder and that the exponents fall in the directed percolation universality class. Our results suggest that the Kibble-Zurek mechanism can be applied to the broader class of systems that exhibit absorbing phase transitions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

The nanocaterpillar's random walk: diffusion with ligand–receptor contacts

Particles with ligand–receptor contacts bind and unbind fluctuating “legs” to surfaces, whose fluctuations cause the particle to diffuse. Quantifying the diffusion of such “nanoscale caterpillars” is a challenge, since binding events often occur on very short time and length scales. Here, in this work, we derive an analytical formula, validated by simulations, for the long time translational diffusion coefficient of an overdamped nanocaterpillar, under a range of modeling assumptions. We demonstrate that the effective diffusion coefficient, which depends on the microscopic parameters governing the legs, can be orders of magnitude smaller than the background diffusion coefficient. Furthermore it varies rapidly with temperature, and reproduces the striking variations seen in existing data and our own measurements of the diffusion of DNA-coated colloids. Our model gives insight into the mechanism of motion, and allows us to ask: when does a nanocaterpillar prefer to move by sliding, where one leg is always linked to the surface, and when does it prefer to move by hopping, which requires all legs to unbind simultaneously? We compare a range of systems (viruses, molecular motors, white blood cells, protein cargos in the nuclear pore complex, bacteria such as Escherichia coli, and DNA-coated colloids) and present guidelines to control the mode of motion for materials design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Unveiling Structural Heterogeneity and Imbalance of Gold Decahedral Nanoparticles using Four-dimensional Scanning Transmission Electron Microscopy

Multi-twinned structures have been observed in technologically important crystal systems, for example diamond cubic and face-centered cubic (FCC) lattices, that include materials such as diamond, silicon, a wide range of noble metals, and their nanoscale counterparts. Beyond atomic building blocks, the special arrangements also occur in the self-assembly of nanoparticles (NP) and μm-sized colloidal particles and occupy parts of their phase diagrams. Spanning a wide range of length scales, the universality of the structures arises when the systems attempt to achieve multitwinned structures by overcoming geometric misfits during minimizing surface energies with entirely {111} or close-packing facets. While it is fundamental to understand how strain is sustained upon twinned structures and symmetry breaking, the knowledge will be paramount in practical aspects such as guiding and controlling the thin film growth, anisotropic NP growth, and self-assembly of NPs. Au decahedral (Dh) NP, as the most prevalent multi-twinned model system, fits five tetrahedral motifs into a circle by sharing an axis resulting in a geometric misfit angle of 7.35°, or a disclination with power of -7.35°. Postulating how Au FCC lattice adopts the misfit, theoretical models have been developed to address the underlying lattice symmetry and inhomogeneous strain distribution separately. Yet, experimental reports regarding the former have been limited due to the relatively large X-ray beam sizes that do not fit the sizes of NPs. On the other hand, though the latter has been widely adapted in the thermodynamics of small (<10 nm) multi-twinned nanoparticles, previous literature has shown that, at edge length of 17 nm, the theory’s is invalidated by shear strain that is observed in a defect-free Au Dh NP by high-resolution transmission electron microscopy (HR-TEM) imaging. Though the advancement of aberrationcorrected scanning transmission electron microscopy (AC-STEM) imaging and ab initio calculation techniques brings new opportunities, along with challenges in complicated image analysis and limitation in particle size (usually below 10 nm), the gap between nanoscale and mesoscale has never been extended to gain insight from atomic system with straightforward interaction potentials.

4D-STEM↗
DOE OSTI2025

Ultrafast Dynamics of Plasmon-Coupled Excitons in Semiconducting Nanoplatelets

Exciton-plasmon coupling in nanomaterials produces many relevant phenomena for photonics applications including increased light-matter interactions, enhanced radiative rates of quantum emitters, and coherent energy exchange. In the case of exciton coupling to surface plasmon polaritons (SPPs), dispersive interactions controlled by the wavevector of optical excitation create the opportunity for tunable optical emission. Strong temporal impacts on exciton lifetimes can also occur in coupled systems, creating the opportunity for ultrafast control of exciton lifetime via changes in electronic coupling magnitude to a dispersive SPP. The coupling strength can be impacted by the morphology of the nanomaterials. Here, in this study, we utilize colloidal semiconductor nanoplatelets deposited onto thin silver plasmonic films, and compare the results to semiconductor quantum dots deposited on the silver films. We map the dispersion of the coupled systems and measure the ultrafast transient absorption response of the coupled systems. Due to the larger interaction areas of the nanoplatelets that lie flat on the silver films, a greater degree of coupling is found for the nanoplatelets, and much faster temporal responses are found as compared to quantum dots. Fresnel theory calculations that incorporate heavy and light hole features can reproduce the dispersion of the nanoplatelet-silver film, and a simple three-state model is developed to provide insights into the nature of the coupling at different photon energies along the dispersion curve.

colloidal semiconductor nanoplatelets↗
DOE OSTI2023

2022 American Conference on Neutron Scattering (ACNS 2022)

The 11th American Conference on Neutron Scattering (ACNS 2022) will be held on June 5-9, 2022, in Boulder, CO. The Conference will provide essential information on the breadth and depth of current neutron-related research worldwide. Hosted by the Neutron Scattering Society of America, this year’s Conference will feature a combination of invited and contributed talks, poster sessions, and tutorials. Topics of the conference are: Advances in Neutron Facilities, Instrumentation and Software: Developments in sources, instrumentation, sample environments and control software. Hard Condensed Matter: Magnetism, correlated metals, quantum/topological materials, superconductors, ferroelectrics, multiferroics, glasses, and disorder phenomena. Submissions outlining examples of neutron scattering in industrial and engineering applications involving hard condensed matter systems are also encouraged. Soft Matter: Neutron studies of soft materials and related fields including in situ and in operando studies. Polymers, surfactants, emulsions, gels, nanoparticles, colloidal suspensions and more. Submissions of computational studies or applications of machine learning beneficial to neutron scattering experiments, as well as examples of neutron scattering in industrial and engineering applications are strongly encouraged. Biology, Biophysics and Biotechnology: Neutron studies of biological and biologically relevant systems. Proteins, bio membranes, biological assemblies, natural materials, nucleic acids, drug-delivery platforms and biomedical systems. Submissions of computational studies or applications of machine learning beneficial to biological neutron scattering experiments, as well as examples of neutron scattering in applied research involving biological systems, are strongly encouraged. Materials Chemistry and Energy: Neutron-based studies of functional materials and materials for energy applications. Examples include porous materials such as metal organic frameworks (MOFs), zeolites; phosphors; novel pigments; electrolytes; catalysts; ionic conductors/cathode materials; photovoltaic materials (hybrid perovskites); thermoelectrics; magnetocalorics/electrocalorics. Structural Materials and Engineering: Neutron scattering studies of materials and engineering processes including structural materials, concrete and metals, as well as engineering processes including combustion, corrosion, additive manufacturing, and others. Neutron Physics: Fundamental physical studies of the neutron and related areas. Emerging Applications in Neutron Scattering: Machine Learning and Data Science: Advances in computing power have contributed to rapidly evolving machine learning and data science fields that can be leveraged to the benefit of the neutron scattering community. The purpose of this session is to highlight recent advances in machine learning and data science and to serve as the foundation of a parallel data and computation track highlighting computation advances and applications in neutron scattering throughout the conference.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Reactivity of Pd–MO 2 encapsulated catalytic systems for CO oxidation

In this work, we present an investigation aimed at characterizing and understanding the synergistic interactions in encapsulated catalytic structures between the metal core (i.e., Pd) and oxide shell (i.e., TiO 2 , ZrO 2 , and CeO 2 ). Encapsulated catalysts were synthesized using a two-step procedure involving the initial colloidal synthesis of Pd nanoparticles (NPs) capped by various ligands and subsequent sol–gel encapsulation of the NPs with porous MO 2 (M = Ti, Zr, Ce) shells. The encapsulated catalytic systems displayed higher activity than the Pd/MO 2 supported structures due to unique physicochemical properties at the Pd–MO 2 interface. Pd@ZrO 2 exhibited the highest catalytic activity for CO oxidation. Results also suggested that the active sites in Pd encapsulated by an amorphous ZrO 2 shell structure were significantly more active than the crystalline oxide encapsulated structures at low temperatures. Furthermore, CO DRIFTS studies showed that Pd redispersion occurred under CO oxidation reaction conditions and as a function of the oxide shell composition, being observed in Pd@TiO 2 systems only, with potential formation of smaller NPs and oxide-supported Pd clusters after reaction. This investigation demonstrated that metal oxide composition and (in some cases) crystallinity play major roles in catalyst activity for encapsulated catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗