Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Class VI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Carbon Dioxide Plume Evolution Following Injection into a Depleted Natural Gas Reservoir: Modeling of Conformance Uncertainty Reduction Over Time

The uncertainty in the long-term fate of CO 2 injected for geologic carbon sequestration (GCS) is a significant barrier to the adoption of GCS as a greenhouse gas emission mitigation approach for industry and regulatory agencies alike. Here we present a modeling study that demonstrates that the uncertainty in forecasts of GCS site performance decreases over time as monitoring data are used to inform and update operational models. The approach we take is to consider a case study consisting of a depleted natural gas reservoir that is used for GCS with CO 2 injection occurring over 20 years, with a 50-year post-injection site care (PISC) period. We constructed a detailed model of the system and ran this model out to 200 years to generate the actual site data. A series of simpler operational models based on limited data and assumptions about how an actual operator would model such a site are then run and compared against the actual model output at various specific monitoring points after one year, two years, etc. The operational model is then updated and improved using the observations (synthetic data from the actual model) at the same time intervals. We found that both model parameter values and model features needed to be added over time to improve matches to the actual system. These kinds of model adjustments are expected to be a normal part of reservoir engineering and site management at GCS sites. We found that the uncertainty in two key measures related to site performance at various locations decreases with time. This overall conclusion should help allay the concerns of industry and regulators about the uncertainty in GCS operations.

03 NATURAL GAS↗

Subtask 1.3 – Integrated Carbon Capture and Storage for North Dakota Ethanol Production

The Energy & Environmental Research Center (EERC), in partnership with Red Trail Energy, LLC (RTE), a North Dakota ethanol producer; the North Dakota Industrial Commission (NDIC) Renewable Energy Program (REP); and the U.S. Department of Energy (DOE), conducted a feasibility and implementation study for a commercial carbon capture and storage (CCS) effort. This subtask provided technical support and developed recommended practices of how small-scale industrial CO2 emitters (<1,000,000 tonnes of CO2 emitted annually) may economically deploy CCS. The 64-million-gallon dry mill RTE ethanol facility, emitting an average 180,000 tonnes of CO2 annually, was the subject of the case study. The positive outcome of this research, which shows technical and economic potential for ethanol–CCS in North Dakota, has resulted in RTE acquiring an approved Permit to Drill on December 2, 2019, for a stratigraphic test well in early 2020, a necessary step toward a North Dakota CO2 Storage Facility Permit (SFP) for the RTE CCS effort. Outcomes include 1) validating the Broom Creek Formation as a regional target for CCS, 2) determining the full carbon life cycle of an industrial fuel production facility with CCS, 3) developing a field implementation plan (FIP) for small-scale CCS, and 4) determining the validity and pathway for using CCS to meet low-carbon fuel (LCF) standards. The technical team included the EERC, RTE, Trimeric Corporation, Schlumberger Carbon Services, and Computer Modelling Group (CMG). Findings from activities conducted November 2016 – May 2020 are summarized as follows. Several key steps have been accomplished toward validating the Broom Creek Formation as a CO2 injection and storage target at the RTE CCS site, including verification of the presence and structure of sandstone layers that may comprise the potential CO2 storage reservoir and the several thousand feet of overlying confining zone. Work included site characterization using existing data, interpretation of seismic data within the study area, and geologic modeling simulation of CO2 injection. Interpreted results estimate 3000 feet of confining zone between the Broom Creek Formation (storage target) and the lowermost underground source of drinking water (e.g., the Fox Hills Formation). The thickness of the Broom Creek injection target varies 230–420 ft within the survey area. Results were used to inform the location of a stratigraphic test well and associated characterization test program. No impediments were identified within the targeted CO2 storage complex that would prevent the project from moving forward. A stratigraphic test well is the next step to validate these results and to acquire remaining data necessary to develop a North Dakota CO2 SFP application. The EERC generated full carbon life cycle estimates for CCS integration with the RTE ethanol facility. Results indicated that an average 40% reduction in CO2 emissions is possible through CCS implementation. Approximately half of the carbon in the overall life cycle for a dry mill ethanol plant is generated through the fermentation process and emitted to the atmosphere; this is the CO2 stream targeted for CCS. The remaining carbon is attributed to corn feedstock farming (diesel, fertilizer), energy for fuel processing (natural gas, electricity), and transportation (diesel) of the fuel product. Life cycle carbon estimates are also affected by the anticipated energy consumption of a potential capture facility, which depend on the type of CO2 product generated. For example, a 30%–40% net CO2 emission reduction is estimated if a liquefied CO2 facility were incorporated compared to a 40%–50% net CO2 reduction if a supercritical “injection-grade” CO2 product is generated; i.e., more energy is required to further refine the CO2 stream, affecting the full carbon life cycle estimates. A CCS FIP was developed and initiated at the RTE CCS site, resulting in the development of several guidance documents: a CO2 Capture Process Design Package, a North Dakota CO2 geologic Storage Permits Template, and a Public Outreach Package for CCS in North Dakota. General FIP components include CO2 capture system, pipeline and well designs; monitoring, verification, and accounting (MVA) plans; geologic characterization and testing programs; and permitting and outreach plans. Vendor bids were also acquired for the CO2 liquefaction facility. Near-surface characterization (groundwater and soil gas sampling) and geologic characterization (seismic survey) were initiated to inform development of a UIC Class VI-compliant MVA plan compliant with a North Dakota CO2 SFP. Designs (well and geologic testing) were completed for a stratigraphic test well compliant with a North Dakota CO2 SFP. In addition, the outreach plan was executed, including community open houses, meetings with city/county/state officials, and development of public materials. Although other entities continued to mature incentive programs in 2019–2020, California and the Internal Revenue Service (IRS) currently provide the most advanced economic opportunities for CCS integrated with fuel production. The California Low-Carbon Fuel Standard (LCFS) adopted a CCS Protocol in January 2019, allowing submittal of a design-based pathway (DBP) application for an approved temporary (not certified) carbon intensity value for a fully engineered facility. An ethanol–CCS DBP application to the California LCFS Program (officially approved February 28, 2020) was developed to show that the RTE CCS effort meets LCFS requirements. The approved DBP provides confidence to advance the project and supports potential investments. Other entities continue to mature incentive programs. The IRS issued guidance in February 2020 that addresses the definition of beginning of construction and revenue procedure on partnerships for the Enhancement of Carbon Dioxide Sequestration Credit (a.k.a. Section 45Q) CCS tax credit program; the IRS anticipates issuing further guidance on issues such as secure geologic storage, utilization qualifications, and recapture of claimed credits. Maturing incentive programs coupled with workable permitting regulations provide confidence to advance CCS projects in North Dakota and support financial investment to proceed with designing, constructing, and implementing CCS projects at small-scale fuel production facilities. The largest hurdles for CCS implementation at small-scale industrial systems are often business/economic-related (i.e., not technical). Market uncertainty already exists for agriculture-based alternative fuels such as corn ethanol, for which production has increased by ~33%, and prices have correspondingly lowered since 2015. Passing the Section 45Q tax credit program improves economic feasibility for CCS but may require external investors for a small business to achieve maximum benefits. Public–private partnerships with NDIC and DOE have resulted in foundational technical and regulatory knowledge, growing stakeholder confidence, and a pathway to implementation that enables similar industrial CCS projects in the region to advance. This subtask was funded through the EERC–DOE Joint Program on Research and Development for Fossil Energy-Related Resources Cooperative Agreement No. DE-FE0024233. Nonfederal funding was provided by NDIC and RTE. The authors would also like to thank CMG, ESRI, IHS, Neuralog, and Schlumberger for allowing the use of their software packages in support of this work.

42 ENGINEERING↗

The future of subsurface monitoring: AEC’s breakthroughs in CCS technology

Carbon capture and storage (CCS) has emerged as a key solution in the fight against climate change. However, for CCS to succeed, it is crucial to ensure that the sequestered CO2 stays safely trapped underground. The U.S. Department of Energy (DOE) has emphasized the need for advancements in subsurface monitoring, measurement, reporting, and verification. Aside from caprock integrity failure, the other primary failure points usually involve defective cement in the casing annulus of wellbores or plugged and abandoned wells. In addition, many energy producers (e.g., oil and gas, geothermal) and storage and disposal operators (e.g., H2 and water) must deal with the same issue. Poorly placed or degraded cement can create pathways for gas or fluid to escape from casing annuli and in plugged and abandoned or orphan wells, posing environmental risks. Yet, a reliable and cost-effective way to monitor cement and well integrity over multiple decades is still unavailable. Traditional geophysical methods like 4D seismic imaging and surface-based electromagnetic monitoring lack the resolution and accuracy for detecting these types of failures (Vasco et al., 2022; Fawad and Mondol, 2021). Wireline logging is expensive to run continuously and is obtrusive to the operation. While fiber optics can potentially be a solution, its bulkiness can significantly compromise the cement's integrity. To address these challenges, the Advanced Energy Consortium (AEC) at The University of Texas at Austin’s Bureau of Economic Geology (the Bureau) has been pioneering research in subsurface monitoring using its portfolio of distributed autonomous microfabricated sensors for harsh subsurface environments since 2008. A class of these microsensors [System on a Chip (SoC)] can be mixed in cement and permanently placed without compromising the cement column; the sensors would then communicate with each other or a data acquisition (DAQ) master node. Another class of the AEC microsensors can be fully autonomous, with rechargeable micro-batteries capable of exceeding 100°C, flash memory, and, currently, a pressure and temperature sensor. They are designed to circulate in mud, geothermal fluids, U-loops, or pipelines. They can log data into memory and are unobtrusive to operations. Our team has been working on a multi-year DOE-funded project (DE-FE0031856)—supported by $2.95M in federal funding and $0.75M in cost-matching from the AEC—to demonstrate SoC sensor utility for CO2 leakage monitoring in CCS applications. This multi-institutional collaboration developed a novel sensing architecture utilizing radiofrequency (RF) microsensors embedded within the cement sheath. These sensors detect CO2 migration and are interrogated via a Smart Casing Collar (SCC).

58 GEOSCIENCES↗

Stability of the anisotropically inflating Bianchi type VI expanding solutions

A special class of the Bianchi type VI expanding solutions was speculated to break the cosmic no-hair theorem that will not approach the late-time de Sitter solution. We will show that an unstable mode always exists when the perturbation of the field equations is applied to the system. In addition to a model-independent perturbation formula, a simplification is also achieved by the introduction of a {delta}R=0 solution good for quadratic models in all Bianchi spaces. The result shows that this special class of anisotropically expanding solutions is unstable.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improved Guarantees for Optimal Nash Equilibrium Seeking and Bilevel Variational Inequalities

We consider a class of hierarchical variational inequality (VI) problems that subsumes VI-constrained optimization and several other problem classes, including the optimal solution selection problem and the optimal Nash equilibrium (NE) seeking problem. Our main contribution is threefold. (i) We consider bilevel VIs with monotone and Lipschitz continuous mappings and devise a single-timescale iteratively regularized extragradient method, named IR-EG 𝚖,𝚖 . We improve the existing iteration complexity results for addressing both bilevel VI and VI-constrained convex optimization problems. (ii) Under the strong monotonicity of the outer-level mapping, we develop a method named IR-EG 𝚜,𝚖 and derive faster guarantees than those in (i). We also study the iteration complexity of this method under a constant regularization parameter. These results appear to be new for both bilevel VIs and VI-constrained optimization. (iii) To our knowledge, complexity guarantees for computing the optimal NE in nonconvex settings do not exist. Motivated by this lacuna, we consider VI-constrained nonconvex optimization problems and devise an inexactly projected gradient method, named IPR-EG, where the projection onto the unknown set of equilibria is performed using IR-EG 𝚜,𝚖 with a prescribed termination criterion and an adaptive regularization parameter. We obtain new complexity guarantees in terms of a residual map and an infeasibility metric for computing a stationary point. Here, we validate the theoretical findings using preliminary numerical experiments for computing the best and the worst NEs.

bilevel optimization↗

Accelerated Hypofractionated Intensity-Modulated Radiotherapy With Concurrent and Adjuvant Temozolomide for Patients With Glioblastoma Multiforme: A Safety and Efficacy Analysis

Purpose: Despite multimodality treatments, the outcome of patients with glioblastoma multiforme remains poor. In an attempt to improve results, we have begun a program of accelerated hypofractionated intensity-modulated radiotherapy (hypo-IMRT) with concomitant and adjuvant temozolomide (TMZ). Methods and Materials: Between March 2004 and June 2006, 35 unselected patients with glioblastoma multiforme were treated with hypo-IMRT. During a 4-week period, using a concomitant boost technique, a dose of 60 Gy and 40 Gy were delivered in 20 fractions prescribed to the periphery of the gross tumor volume and planning target volume, respectively. TMZ was administered according to the regimen of Stupp et al. Results: The median follow-up was 12.6 months. Of the 35 patients, 29 (82.8%) completed the combined modality treatment, and 25 (71.4%) received a median of four cycles of adjuvant TMZ. The median overall survival was 14.4 months, and the median disease-free survival was 7.7 months. The median survival time differed significantly between patients who underwent biopsy and those who underwent partial or total resection (7.1 vs. 16.1 months, p = 0.035). The median survival was also significantly different between patients with methylated vs. unmethylated 0-6-methylguanine-DNA methyltransferase promoters (14.4 vs. 8.7 months, p = 0.049). The pattern of failure was predominantly central, within 2 cm of the initial gross tumor volume. Grade 3-4 toxicity was limited to 1 patient with nausea and emesis during adjuvant TMZ administration. Conclusion: The results of our study have shown that hypo-IMRT with concomitant and adjuvant TMZ is well tolerated with a useful 2-week shortening of radiotherapy. Despite a high number of patients with poor prognostic features (74.3% recursive partitioning analysis class V or VI), the median survival was comparable to that after standard radiotherapy fractionation schedules plus TMZ.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Valence band electronic structure of the van der Waals ferromagnetic insulators: VI 3 and CrI 3

Ferromagnetic van der Waals (vdW) insulators are of great scientific interest for their promising applications in spintronics. It has been indicated that in the two materials within this class, CrI 3 and VI 3 , the magnetic ground state, the band gap, and the Fermi level could be manipulated by varying the layer thickness, strain or doping. To understand how these factors impact the properties, a detailed understanding of the electronic structure would be required. However, the experimental studies of the electronic structure of these materials are still very sparse. Here, we present the detailed electronic structure of CrI 3 and VI 3 measured by angle-resolved photoemission spectroscopy (ARPES). Our results show a band-gap of the order of 1 eV, sharply contrasting some theoretical predictions such as Dirac half-metallicity and metallic phases, indicating that the intra-atomic interaction parameter (U) and spin-orbit coupling (SOC) were not properly accounted for in the calculations. We also find significant differences in the electronic properties of these two materials, in spite of similarities in their crystal structure. In CrI 3 , the valence band maximum is dominated by the I 5p, whereas in VI 3 it is dominated by the V 3d derived states. Our results represent valuable input for further improvements in the theoretical modeling of these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE SPITZER SURVEY OF INTERSTELLAR CLOUDS IN THE GOULD BELT. IV. LUPUS V AND VI OBSERVED WITH IRAC AND MIPS

We present Gould's Belt (GB) Spitzer IRAC and MIPS observations of the Lupus V and VI clouds and discuss them in combination with near-infrared (2MASS) data. Our observations complement those obtained for other Lupus clouds within the frame of the Spitzer 'Core to Disk' (c2d) Legacy Survey. We found 43 young stellar object (YSO) candidates in Lupus V and 45 in Lupus VI, including two transition disks, using the standard c2d/GB selection method. None of these sources was classified as a pre-main-sequence star from previous optical, near-IR, and X-ray surveys. A large majority of these YSO candidates appear to be surrounded by thin disks (Class III; {approx}79% in Lupus V and {approx}87% in Lupus VI). These Class III abundances differ significantly from those observed for the other Lupus clouds and c2d/GB surveyed star-forming regions, where objects with optically thick disks (Class II) dominate the young population. We investigate various scenarios that can explain this discrepancy. In particular, we show that disk photoevaporation due to nearby OB stars is not responsible for the high fraction of Class III objects. The gas surface densities measured for Lupus V and VI lie below the star formation threshold (A{sub V} {approx} 8.6 mag), while this is not the case for other Lupus clouds. Thus, few Myr older age for the YSOs in Lupus V and VI with respect to other Lupus clouds is the most likely explanation of the high fraction of Class III objects in these clouds, while a higher characteristic stellar mass might be a contributing factor. Better constraints on the age and binary fraction of the Lupus clouds might solve the puzzle but require further observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Relativistic Effects on a Metal–Metal Bond: Osmium Corrole Dimers

A series of metal–metal bonded osmium corrole dimers, {Os[T p XPC]} 2 , were synthesized in reasonably good yields (35–46%) via the interaction of the corresponding free-base meso -tris( p -X-phenyl)corroles (H 3 [T p XPC], X = CF 3 , H, CH 3 , and OCH 3 ), Os 3 (CO) 12 , and potassium carbonate in 1,2,4-trichlorobenzene under an inert atmosphere at 180 °C over several hours. The complexes are only the second class of Os corroles reported to date (the first being Os VI N corroles) and also the second class of metal–metal bonded metallocorrole dimers (the other being Ru corrole dimers). Comparison of the X-ray structures, redox potentials, and optical spectra of analogous Ru and Os corrole dimers, along with scalar-relativistic DFT calculations, has provided an experimentally calibrated account of relativistic effects in these complexes. Three of the Os corrole dimers (X = CF 3 , H, and OCH 3 ) were analyzed with single-crystal X-ray diffraction analysis, revealing inversion-related corrole rings with eclipsed Os–N bonds and Os–Os distances of ~2.24 Å that are ~0.06 Å longer than the Ru–Ru distances in the analogous Ru corrole dimers. Interestingly, a comparison of scalar-relativistic and nonrelativistic DFT calculations indicates that this difference in metal–metal bond distance does not, in fact, reflect a differential relativistic effect. Additionally, for a given corrole ligand, the Ru and Os corrole dimers exhibit nearly identical oxidation potentials but dramatically different reduction potentials, with the Os values ~0.5 V lower relative to Ru, suggesting that whereas oxidation occurs in a ligand-centered manner, reduction is substantially metal-centered, which indeed was confirmed by scalar-relativistic calculations. The calculations further indicate that approximately a third of the ~0.5 V difference in reduction potentials can be ascribed to relativity. The somewhat muted value of this relativistic effect appears to be related to the finding that reduction of an Os corrole dimer is not exclusively metal-based but that a significant amount of spin density is delocalized over to the corrole ligand; in contrast, reduction of an Ru corrole dimer occurs exclusively on the Ru–Ru linkage. For isoelectronic complexes, the Ru and Os corrole dimers exhibit substantially different UV–vis spectra. Furthermore, a key difference is a strong near-UV feature of the Os series, which in energy terms is blue-shifted by ~0.55 V relative to the analogous feature of the Ru series. TDDFT calculations suggest that this difference may be related to higher-energy Os(5d)-based LUMOs in the Os case relative to analogous MOs for Ru.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-Dependent Conformations of Model Viscosity Index Improvers

Lubricants are comprised of base oils and additives where additives are chemicals that are deliberately added to the oil to enhance properties and inhibit degradation of the base oils. Viscosity index (VI) improvers are an important class of additives that reduce the decline of fluid viscosity with temperature [1], enabling optimum lubricant performance over a wider range of operating temperatures. These additives are typically high molecular weight polymers, such as, but not limited to, polyisobutylenes, olefin copolymer, and polyalkylmethacrylates, that are added in concentrations of 2-5% (w/w). Appropriate polymers, when dissolved in base oil, expand from a coiled to an uncoiled state with increasing temperature [2]. The ability of VI additives to increase their molar volume and improve the temperature-viscosity dependence of lubricants suggests there is a strong relationship between molecular structure and additive functionality [3]. In this work, we aim to quantify the changes in polymer size with temperature for four polyisobutylene (PIB) based molecular structures at the nano-scale using molecular simulation tools. As expected, the results show that the polymers adopt more conformations at higher temperatures, and there is a clear indication that the expandability of a polymer is strongly influenced by molecular structure.

lubricants, base oils, viscosity↗

On Painleve VI transcendents related to the Dirac operator on the hyperbolic disk

Dirac Hamiltonian on the Poincare disk in the presence of an Aharonov-Bohm flux and a uniform magnetic field admits a one-parameter family of self-adjoint extensions. We determine the spectrum and calculate the resolvent for each element of this family. Explicit expressions for Green's functions are then used to find Fredholm determinant representations for the tau function of the Dirac operator with two branch points on the Poincare disk. Isomonodromic deformation theory for the Dirac equation relates this tau function to a one-parameter class of solutions of the Painleve VI equation with {gamma}=0. We analyze long-distance behavior of the tau function, as well as the asymptotics of the corresponding Painleve VI transcendents as s{yields}1. Considering the limit of flat space, we also obtain a class of solutions of the Painleve V equation with {beta}=0.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical, electrical, and EPR studies of polycrystalline Al:Cr:ZnSe gain elements

Transition metal-doped II-VI (TM:II-VI) chalcogenides are well-known laser materials for optically pumped middle-infrared lasers. Cr:ZnSe is a key representative of this class of transition metal doped II-VI gain media and is arguably considered the material of choice for optically pumped middle-infrared lasers. In addition to effective mid-IR lasing under optical excitation, these crystals, being wide-band semiconductors, hold the potential for direct electrical excitation. One way to form n-type conductivity in ZnSe crystals is by annealing them in a melt of Zn-Al alloy. However, this annealing of Cr:ZnSe crystals results in their purification and transfer of chromium to the melt of Zn-Al alloy. In this article, we report on optimizing the doping technique for providing n-type conductivity in Al:Cr:ZnSe crystals while preserving the chromium concentration. Al:Cr:ZnSe samples with resistivities ranging from 10.8 to 992 Ω-cm were fabricated. While the 2 + valence state of Cr is typically dominant in Cr:ZnSe, both Cr 2+ and Cr + were detected in Al:Cr:ZnSe samples. The maximum level of Cr + concentration was measured to be 4 × 10 18 cm -3 .

36 MATERIALS SCIENCE↗

Pyroelectric response and temperature-induced α-β phase transitions in α -In 2 Se 3 and other α -III 2 VI 3 (III = Al, Ga, In; VI = S, Se) monolayers

The pyroelectric response of materials is a promising phenomenon that is used in many applications, but two-dimensional (2D) pyroelectricity has not received due attention. Here, in this study, we report ab initio molecular dynamics simulations to investigate the pyroelectric effect in α-III 2 VI 3 (III = Al, Ga, In; VI = S, Se) monolayers, an emerging class of 2D pyroelectric materials. The in-plane and out-of-plane spontaneous polarizations are found to be robust at room temperature. We demonstrate large pyroelectric response in these materials that is associated with temperature-induced ferroelectric-to-paraelectric phase transitions. Identifying the high-temperature nonpolar phase as the β-phase, we demonstrate strong displacive character in the α-β phase transition, which is achieved through relative displacements of the top three and bottom two atomic sublayers in opposite directions. The present work unravels and highlights the primary pyroelectric effect and the α-β phase transitions that are responsible for the promising pyroelectricity in α-III 2 VI 3 monolayers.

36 MATERIALS SCIENCE↗

Synthesis and emerging properties of 2D layered III–VI metal chalcogenides

Atomically thin layered III–VI metal chalcogenides are an emerging class of 2D materials that have attracted increasing attention in recent years due to their remarkable physical properties and technological applications. Thanks to the recently developed theoretical and experimental methods, a number of exciting discoveries for these materials have revealed their new phases, a unique “Mexican hat”-shaped electronic band structure, and superior optical and electronic properties that distinguish them from other 2D materials such as transition metal dichalcogenides. This review summarizes the novel properties, structures, and synthesis strategies for these materials and emphasizes the most cutting-edge and seminal achievements in this rapidly growing field in order to provide input for future research works. We first present the rich crystal structure and phases that have been found in these materials, with an emphasis on the possibility of phase engineering. Then, we discuss the synthesis strategies for 2D layered III–VI metal chalcogenides from the top-down, bottom-up, and template-based chemical conversion approaches. We focus on the highly controlled synthesis methods that provide fine-tuning of the thickness, phase, edge structure, and other morphological characteristics. Third, we discuss the properties and applications of these materials, focusing on their unique electronic structure including the Mexican hat-shaped valence band, their superior nonlinear optical properties, high-performance electronic devices, promising photoelectrochemical properties, and emerging quantum properties such as quantum emission, exciton condensation, ferromagnetism, and topological quantum phase transition. To conclude, we provide our perspective on the current challenges and future directions in this field.

36 MATERIALS SCIENCE↗

Triel-Defined Helicity in One-Dimensional III–VI–VII van der Waals Crystals

Inorganic extended lattice solids that bear complex helical motifs manifest unusual physical and quantum states that arise due to their noncentrosymmetric or chiral nature. However, the systematic understanding of how elemental composition influences the structure and physical properties in helical inorganic crystals has been precluded by the rarity of these materials and the lack of modular phases that display such motifs. Here, we report the synthesis of AlSeI single crystals, the first aluminum-containing helical crystal in the III-VI-VII 1D van der Waals class. AlSeI completes the experimentally accessible triel series in the helical selene iodides alongside InSeI and GaSeI. Using the Al, Ga, and In triel series in this selene iodide class, we experimentally demonstrate the evolution of the local quasi-tetrahedral building unit geometry, chain packing, helical parameters, and band gaps based primarily on the identity of the triel atom. Our results underscore the chemical modularity of these phases, the broad range of helical parameters, and the spectrum of electronic states from the visible to the ultraviolet range in this emergent class of 1D, exfoliable, and helical extended lattice solids.

Chemical structure↗

Guanidinium-Based Ionic Covalent Organic Framework for Rapid and Selective Removal of Toxic Cr(VI) Oxoanions from Water

Ionic covalent organic frameworks make up an emerging class of functional materials in which the included ionic interfaces induce strong and attractive interactions with ionic species of the opposite charge. Here, the strong and selective binding forces between the confined diiminoguanidinium groups in the framework and tetrahedral oxoanions have led to unparalleled effectiveness in the removal of the toxic chromium(VI) pollutant from aqueous solutions. Lastly, the new functional framework can take up from 90 to 200 mg/g of chromium(VI), depending on the solution pH, and is capable of decreasing the chromium(VI) concentration in water from 1 ppm to 10 ppb within minutes (an order of magnitude below the current U.S. Environmental Protection Agency maximum contaminant level of 100 ppb), demonstrating superior properties among known ion exchange materials and natural sorbents.

36 MATERIALS SCIENCE↗

Evaluating the oxidative, photothermal and electrical stability of colloidal nanocrystal solids

IV-VI quantum dot (QD) solids are a novel class of granular electronic materials with great technological potential (e.g., in photodetectors, field-effect transistors (FETs), and solar cells), but their oxidative and thermal instability present a barrier to practical applications [1]. Poor stability is a fundamental issue facing many nanoscale materials due to high surface area and surface energy. Basic studies are needed to elucidate the most important mechanisms of degradation and develop robust countermeasures if QD materials are to become technologically important. This project determined the degradation mechanisms of IV-VI QD solids (primarily PbSe and PbS) and introduced new chemical strategies to drastically improve their performance, stability, and operating lifetimes [2-5]. Our approach was based on (1) detailed testing of QD thin film materials (principally FETs and solar cells) as a function of oxidative and thermal stress, and (2) the use of organic and inorganic approaches to link the QDs into strongly electronically coupled, high-mobility films, prevent their oxidation, and eliminate internal degrees of freedom that lead to film instability and degradation in response to electrical and thermal stress. Stability against oxidation and thermal degradation was the major focus of this project. We have evaluated the stability of QD thin films and interfaces at temperatures less than 100°C (the regime most relevant to solar and transistor applications). Low-temperature oxidation and sintering of QD films have been investigated using optical absorption spectroscopy, Fourier transform infrared spectroscopy (FTIR), current-voltage scanning of transistors and solar cells, X-ray photoelectron spectroscopy, and scanning Kelvin probe microscopy (SKPM). SKPM was used to map the potential profiles of operating QD FETs and solar cells as a function of bias and illumination, which provides detailed information on how the work functions, potential drops and electric field within these devices determine device operation, and set the stage for future studies targeted at understanding and preventing device failure. We pursued two strategies to fabricate QD films with stable electrical characteristics: (1) the use of robust molecular surface ligands [2], and (2) “matrix engineering,” i.e., infilling the QD solid with metal oxide or metal sulfide matrices by low-temperature atomic layer deposition (ALD) to passivate surface states, prevent oxidation, lock the QDs into position, inhibit diffusion, and tune the height and width of the inter-QD potential barriers that govern charge transport [5,6]. Poor stability is a common feature of nanoscale electronic materials, yet stability is all too rarely the focus of basic research. Fundamental studies are therefore needed to elucidate the most important mechanisms of degradation and develop simple yet effective countermeasures. By revealing both how QD solids degrade in response to environmental stresses (oxidative, photothermal, and electric) and how to prevent this degradation, the project has greatly improved our ability to develop stable, high-performance QD materials for real-world applications.

36 MATERIALS SCIENCE↗