Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chemical Looping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Final Report – Cooperative Research and Development Agreement between National Energy Technology Laboratory and Praxair, Inc.

Praxair and DOE-NETL entered into a collaborative research and development agreement (CRADA) in March 2019 to evaluate economic viability of chemical looping processes for hydrogen, CO, and syngas production in comparison to state-of-the-art conventional processes. Praxair had developed process configurations for producing hydrogen and CO using chemical looping processes. NETL had modeling and system design experience for the chemical looping reactor system. The goal for NETL is to provide performance and design information regarding the chemical looping portion of a potential commercial plant. Praxair’s goal is to evaluate chemical looping processes and try to identify a process that can be commercially relevant within a few years. A key to success for the program will be to develop a chemical looping reactor system that enables significant capital cost reduction and performance improvement for the overall process. This report describes chemical looping-based CO production process, chemical looping reactor system and oxygen carrier material as well as summary of technoeconomic analysis results. Also included in the report are a list of assumptions that were used for designing the chemical looping plant and a list of areas for further study required to validate some of these assumptions in future efforts. The initial goal was to design two chemical looping plants. Case 1 would produce 1 MM scfd Hydrogen from NG, and Case 2 would co-produce hydrogen and 5 MM scfd CO from NG. However, later in the collaboration, it was decided to drop Case 1 as Case 2 process already included hydrogen production.

Bayham, Samuel↗
DOE OSTI2024

Catalytic Resonance Theory: Forecasting the Flow of Programmable Catalytic Loops

Chemical transformations on catalyst surfaces occur through series and parallel reaction pathways. These complex networks and their behavior can be most simply evaluated through a three-species surface reaction loop (A* to B* to C* to A*) that is internal to the overall chemical reaction. Application of an oscillating dynamic catalyst to this reactive loop has been shown to exhibit one of three types of behavior: (1) a positive net flux of molecules about the loop in the clockwise direction, (2) a negative net flux of molecules about the loop in the counterclockwise direction, or (3) negligible flux of molecules about the loop at the limit cycle of reaction. Three-species surface loops were simulated with microkinetic modeling to assess the reaction loop behavior resulting from a catalytic surface oscillating between two or more catalyst surface energy states. Selected input parameters for the simulations spanned an 11-dimensional parameter space using 127 688 different parameter combinations. Their converged limit cycle solutions were analyzed for their loop turnover frequencies, the majority of which were found to be approximately zero. Classification and regression machine learning models were trained to predict the sign and magnitude of the loop turnover frequency and successfully performed above accessible baselines. Notably, the classification models exhibited a baseline weighted F1 score of 0.49, whereas trained models achieved weighted F1 scores of 0.94 and 0.96 when trained on the parameters used to define the simulations and derived rate constants, respectively. The trained models successfully predicted catalytic loop behavior, and interpretation of these models revealed all input parameters to be important for the prediction and performance of each model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Development of a Techno-Economic Analysis Framework for a Solar Thermochemical Fuel Production Process

Synthetic liquid fuels can provide a drop-in substitute for fossil-based fuels in sectors such as aviation and maritime, where electrification is not a viable option due to the need for high specific energy density. However, for these alternative fuels to be adopted at a commercial scale, their price must be competitive compared to their fossil-based counterparts. The reverse water-gas shift (RWGS) reaction offers a promising pathway, using hydrogen (sourced from electrolysis) and carbon dioxide as the feed and reacting to produce syngas - a mixture of H2 and CO at a specific ratio. Syngas is a useful precursor that can be converted into fuels and chemicals via known downstream processes, such as liquid transportation fuels via Fischer-Tropsch (FT) synthesis. The RWGS reaction is currently not applied in commercial scale, unlike the rest of the components in the process chain (electrolyzers and syngas-to-fuel synthesis units). The RWGS reaction poses several challenges due to its restrictive thermodynamics. Being an equimolar reaction, high temperatures and a large excess of H2 are needed to achieve reasonable CO2 conversion at equilibrium. This has detrimental effects on practical process implementation and the quality of syngas that can be produced, with direct effect on the energy and capital requirements, as well as the need for expensive downstream separation. In this work, we are proposing to develop a new concentrating solar thermal (CST) compatible RWGS reactor, performing the reaction in a 2-step chemical looping process using metal oxide at a temperature range of 600-800 degrees Celsius. By decoupling the reactor from the solar receiver, the Generation 3 (Gen3) CST technology could be utilized, together with its proposed thermal energy storage (TES) technology, benefitting from a good match to the required temperatures. CST technology is a viable option for supplying the heat that could be rapidly deployed in scale, thus being a good match to the gas-to-liquid (GTL) process which requires a large minimal scale to be commercially viable. The integration of TES with CST also allows operating the plant at large annual capacity factors and avoids multiple shutdown/startup cycles, thus fitting into the steady-state operation mode that most GTL processes require. The main innovation in the proposed design hinges on a countercurrent reaction design using a packed bed reactor. In 2019 Metcalfe et al. showed the benefits of countercurrent species exchange could be realized in a redox chemical-looping processes, by storing the favorable countercurrent chemical potential profiles in a packed bed of non-stoichiometric oxide. Metcalfe et al. applied this breakthrough concept to the WGS reaction, which is conventionally a co-feed catalytic process, showing a dramatic improvement. Bulfin et al. (2023) performed a similar proof-of-concept demonstration for the RWGS reaction using CeO2, achieving cumulative and peak CO2 conversions of 88% and 95%, respectively, compared to a thermodynamic limit of 58% for the co-feed catalytic process at the same conditions. In our new REGENLOOP project, we are developing a reactor prototype from the heat-exchange packed bed reactor-type, a commonly used reactor in the chemical industry. The endothermic heat of reduction will be supplied to the reactor using CST, while the same heat transfer fluid (HTF) mechanism will be used to extract the exothermic heat of oxidation. An array of multiple reactors is used to supply constant high-purity CO stream, that is then mixed with H2 from electrolysis to produce a high-purity syngas at the required composition. By removing the CO-CO2 separation after the RWGS process, significant energy and cost reduction can be achieved. A physics-based TEA framework is currently being developed, covering all the major plant processes, from the solar collection through storage, chemical looping RWGS, GTL, and auxiliary unit operations, up to the liquid hydrocarbon product. This modeling framework will utilize reduced-order models for the chemical looping RWGS and TES, CST modeling using SolarPILOT, and Aspen Plus for the GTL. By using this combined physics-based approach, the effects of design/operating parameters on the performance and cost can be elucidated. In our presentation, the modeling framework will be presented in detail, including preliminary cost predictions of using this plant configuration under a few selected relevant case studies. This study will be used to identify the major cost drivers, informing further system design and optimization needed to chart the way for a commercially viable pathway.

14 SOLAR ENERGY↗
DOE OSTI2024

Catalytic resonance theory: Circumfluence of programmable catalytic loops

Chemical reactions on heterogeneous catalyst surfaces exhibit complex networks of elementary reactions with multiple pathways to fluid phase products, sometimes leading to surface reaction loops consisting of a closed cycle reaction pathway. While conventional catalysts at steady state exhibit zero net flux in either direction around a catalytic loop, the loop turnover frequency of three-species surface loops was evaluated in this work via microkinetic modeling to assess the reaction loop behavior resulting from a catalytic surface oscillating between two or more surface energy states. For dynamic heterogeneous catalysts undergoing applied oscillations of surface energy (i.e., programs), surface reaction loops of three species were shown to exhibit non-zero net flow of molecules around the loop, with the extent of loop turnover frequency varying with the applied frequency and amplitude of a sinusoidal or square wave oscillation. Alternatively, some dynamic surface reactions exhibited oscillations only between two surface species or resulted in surfaces covered by a single species at all times. Here, more complex behavior was observed for dynamic surface programs of three distinct electronic states, with the temporal order of applied states controlling the direction of flow of molecules within a three-molecule surface loop. Catalytic loops have the potential to limit overall catalytic reaction rates and use energy in programmable catalysts, while some applications could purposely impose non-zero loop turnover frequency for improved surface reaction control.

Catalysis↗
DOE OSTI2025

CO2-Utilization Facilitated by Solid Reaction Mediums—A Review

Abstract This short review examines solid reaction mediums—specifically oxygen, CO 2 , and carbon carriers—within the framework of Chemical Looping (CL) to illuminate various CO 2 utilization pathways. The thermodynamic consideration for carrier selection is first discussed. This is followed by a summary of the key carrier types investigated to date, with an emphasis on elucidating the roles of compositional, structural, and surface properties of the various carriers toward their reactive performances. Besides assessing the performances of various oxygen carriers, their long-term performance, potential deactivation mechanism in the presence of CO 2, and strategies for their reactivation are also discussed in the context of chemical looping dry reforming of methane (CLDRM). While relatively underexplored, the current status of development, advantages, and potential limitations of CO 2 carriers in sorbent looping dry reforming of methane (SLDRM) and carbon carriers in chemical looping methane cracking (CLMC) are also reviewed and discussed. Emerging topics such as combined carriers are also covered along with a perspective for future research directions. Overall, this review aims to offer insights into the sustainable use of CO 2 through chemical looping, emphasizing the potential of solid reaction mediums across different carriers and the challenges associated with these solid reaction mediums.

Iftikhar, Sherafghan↗
DOE OSTI2020

10 MWE CDCL Large Pilot Plant – pre-FEED Study

Coal Direct Chemical Looping (CDCL) is an advanced oxy-combustion technology that has the potential to substantially reduce the energy penalty and the cost of electricity (COE) for coal-fired power generation with CO₂ capture. The Babcock & Wilcox Company (B&W) and The Ohio State University (OSU) have been collaborating on the development of an iron oxide oxygen-carrier based chemical looping technology for clean power generation with inherent carbon capture. In this process, coal is dried and pulverized prior to being transported into a moving-bed reducer. In the reducer, coal reacts with the oxygen-carrier particles, forming combustion byproducts, predominantly CO₂ and H₂O, while reducing the iron oxide oxidation state from Fe₂O₃ to a mixture of FeO and Fe. The reduced state particles are then transported to a combustor reactor and re-oxidized with air. Following the oxidation, the oxygen-carrier particles are regenerated, and a large amount of heat is released for steam production. The produced steam is sent to a turbine for electricity generation. Meanwhile, the CO₂–rich stream leaving the reducer is cooled, cleaned, and compressed for subsequent pipeline transportation and sequestration. By combining air separation and fuel conversion into a single system, the CDCL technology enables the intensification of oxy-combustion processes by eliminating the energy and cost intensive cryogenic air separation unit and thereby results in higher overall plant efficiencies and lower COE’s. The use of a moving-bed reducer results in high conversions of volatile hydrocarbons and high CO₂ purity, which reduces the cost of downstream CO₂ purification for sequestration or utilization. The Babcock & Wilcox Company in collaboration with The Ohio State University, Johnson & Matthey, The Electric Power Research Institute, and Dover Light & Power completed a Preliminary Front-End Engineering and Design (Pre-FEED) study of a 10 MWe coal-direct chemical looping (CDCL) pilot plant. The planned system is a modular 10 MWe CDCL large pilot facility consisting in 4 modules of 2.5 MWe each, working in parallel and to be hosted within the current structure at the City of Dover’s Municipal Power Plant. The CDCL system can achieve auto-thermal operation and includes a sub-critical steam cycle for power generation. The pilot system was designed to demonstrate full commercial operation at a reduced scale. The coal distribution per plan area is a representative slice of larger commercial arrangements. The system includes a CO₂ recycle system, but it does not include a compression system. The large pilot includes all the environmental control equipment and oxygen carrier and ash handling systems. As part of the project, the Team performed laboratory testing and carried out multiple pilot test campaigns to obtain design and performance information at the 250 kWth CDCL pilot facility at the Babcock & Wilcox Company’s Research Center. The Team demonstrated sustained operations at designed coal inputs, high coal conversion, high CO₂ purity, heat generation on the combustor, low carbon carryover between reactors and low particle attrition. Emissions generated in the reducer reactor were identified as SO₂ and NO x . The commercial manufacturing cost of oxygen carrier particle was evaluated by JM. A particle manufacturing report was generated and submitted to the DOE. Based on the results from the pilot tests and the pre-FEED design efforts, a techno-economic analysis was performed. The study shows that the CDCL process is a promising carbon-friendly technology capable of producing electricity with high efficiency. The estimated COE of the supercritical CDCL plant is $83.3 / MWh, which meets DOE’s target of less than 30% increase in COE when compared to a supercritical PC plant without CO₂ capture. This is the lowest among the existing carbon capture technologies (post-combustion and oxy-combustion) for fossil fuel power plant. CDCL is evaluated to be the most promising technology for carbon capture from the economic aspect.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Experimental Combustion and Flame Characterization of a Chemical Looping-Based Oxidative Dehydrogenation Byproduct Fuel Mixture Containing High CO2 Dilution

Abstract This study investigates the combustion performance of a CO2-rich fuel mixture containing ethane and methane as active species using a constant volume combustion chamber. This fuel is obtained as a byproduct of a chemical looping-based oxidative dehydrogenation (Cl-ODH) process ethylene production. The byproduct gas mixture has 40.79% CO2, 39.49% ethane, and 4.88% methane by weight with other minor compounds. Using this fuel for energy extraction would improve the process efficiency of the ethane to ethylene conversion. After initial combustion modeling, the gas fuel mixture was reduced to just the major species: CO2, ethane, and methane. The mixture was then tested for flammability limits and combustion performance under spark-ignition conditions. Effects of ambient conditions like temperatures between 300 and 400 K with initial pressures from 1 to 10 bar were tested. The effects of stoichiometry were tested to understand flame velocities and heat release. The fuel mixture showed an overall reduced flame velocity compared to gasoline. Instability in combustion was believed to be caused by the dissociation of ethane under elevated conditions. At higher pressures, the flame produces lower cumulative heat release. Simulations were also performed using a model tuned to replicate the operations of the combustion chamber used in the experiments. Heat release and unburnt fuel mass data were calculated to identify the discrepancies in the combustion completeness at elevated pressures. The effects of CO2 quenching the flame coupled with the increased dissociation of the fuel species can lead to up to more than 75% of the fuel mixture being unburnt. Data from this study were used to modify a small-scale spark-ignition engine to use this fuel and produce usable energy.

Energy & Fuels↗
DOE OSTI2022

LaNi x Fe 1–x O 3 as flexible oxygen or carbon carriers for tunable syngas production and CO 2 utilization

The current study reports LaFe 1–x Ni x O 3–δ redox catalysts as flexible oxygen or carbon carriers for CO2 utilization and tunable production of syngas at relatively low temperatures (~700 °C), in the context of a hybrid redox process. Specifically, perovskite-structured LaFe 1–x Ni x O 3–δ with seven different compositions (x = 0.4–1) were prepared and investigated. Cyclic experiments under alternating methane and CO 2 flows indicated that all the samples exhibited favorable reactive performance: CH 4 and CO 2 conversions varied between 85% and 98% and 70–88%, respectively. While H 2 /CO ratio from Fe-rich redox catalysts was ~2.3:1 in the methane conversion step, Ni-rich catalysts produced a concentrated (~ 93.7 vol%) hydrogen stream via methane cracking. The flexibility of LaFe 1–x Ni x O 3–δ to produce syngas (or hydrogen) with tunable compositions was found to be governed by the iron/nickel (Fe/Ni) ratio. Redox catalysts with higher Fe contents act as a lattice oxygen carrier via chemical looping partial oxidation (CLPOx) of methane whereas those with higher Ni contents function as a carbon carrier via chemical looping methane cracking (CLMC) scheme. XRD analysis and temperature-programmed reactions revealed that both types of catalysts involve the formation of La 2 O 3 and Ni 0 /Ni-Fe phases under the methane environment. The ability to re-incorporate La 2 O 3 and Ni/Fe into a perovskite structure gives rise to oxygen-carrying capacity whereas stable Ni 0 or Ni/Fe phases would catalyze methane cracking without lattice oxygen exchange in the reaction cycles. Here, temperature programmed oxidation and Raman spectroscopy indicated the presence of graphitic and amorphous carbon species, which were effectively gasified by CO 2 to produce concentrated CO. Stability tests over LaFe 0.5 Ni 0.5 O 3 and LaNiO 3 revealed that the redox performance was stable over a span of 50 cycles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Redox oxide@molten salt as a generalized catalyst design strategy for oxidative dehydrogenation of ethane via selective hydrogen combustion

Here, the current study demonstrates a redox oxide @ molten salt core-shell architecture as a generalized redox catalyst design strategy for chemical looping – oxidative dehydrogenation of ethane. 17 combinations of redox active oxides and molten salts were prepared, evaluated, and characterized. X-ray diffraction indicates that the redox oxides and molten salts are fully compatible, forming separate and stable phases. X-ray photoelectron spectroscopy demonstrates that the molten salts aggregate at the redox oxide surface, forming a core-shell structure to block the non-selective sites responsible for CO x formation. Up to ~74% single-pass olefin yields were achieved using the proposed redox catalyst design strategy. Statistical analyses of the performance data indicate the potential to achieve up to 86.7% single-pass yield by simply optimizing the operating conditions using the redox catalysts reported in this study. Meanwhile, the generalizability of the catalyst design strategy offers exciting opportunities to further optimize the composition and performance of the redox catalysts for ethane ODH under a chemical looping scheme with significantly reduced energy consumption and CO 2 emissions.

03 NATURAL GAS↗
DOE OSTI2022

Techno-economic Analysis for a Low Cost and Recyclable Oxygen Carrier

The novelty of a chemical looping combustion (CLC) process is its ability to oxidize solid or gaseous fuels in a nitrogen-free environment eliminating the need for post combustion carbon dioxide capture. The technology is based on the oxygen carrier (OC); a metal oxide that at high temperatures can undergo a reduction reaction with a fuel, followed by an oxidation reaction with air. Successful development of CLC processes is dependent on the OC having: low cost, high attrition resistance under CLC conditions, and high reactivity for coal. In this paper, we discuss the development of a novel iron-based OC formulation produced from low cost and abundant raw materials. The active OC components are recyclable, with reformulated material performance comparable to the virgin OC, even when reformulated with ash contents of up to 10%. Furthermore, we discuss a techno-economic analysis for a centrally located OC facility for the novel OC, with a production capacity of 1 million metric tonnes per year. The facility serves a hypothetical market comprising 25 chemical looping combustion facilities, averaging 5 tonnes per hour OC replacement per facility. Estimates for the cost of the OC are around $150/tonne, and include an energy-to-power option to improve process economics.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

OSU/NETL/Sandia/LBNL IDAES (CRADA Final Report)

The objective of this CRADA is to facilitate the cooperation among the Ohio State Univesity and the collaborators for the Institute for the Design of Advanced Energy Systems (IDAES). The goal is to develop, validate, and use a suite of process models based on the Ohio State's Fe-based coal direct chemical looping (CDCL) combustion process. This collaboration will provide Ohio State with a greater fundamental understanding of their chemical looping process, will help to improve the process efficiency, and will thus enable a greater probability of developing a commercial success. This collaboration will provide the IDAES team with detailed real-world process data to validate and demonstrate the effectiveness of its toolset.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Metal ferrite oxygen carriers for conversion of CO2 to CO and fuel to syngas or CO

The invention provides a use of metal ferrite oxygen carrier for converting carbon dioxide to carbon monoxide or synthesis gas via three processes: catalytic dry reforming of methane, chemical looping dry reforming of fuel and promoting coal gasification with CO2. The metal ferrite oxygen carrier comprises MzFexOy, where MzFexOy is a chemical composition with 0 0 and 0<y≤6 and M is one of Ca, Ba, and/or combinations thereof. For example, MzFexOy may be one of CaFe2O4, BaFe2O4, MgFe2O4, SrFe2O4 and/or combinations thereof. In catalytic dry reforming, methane and carbon dioxide react in the presence of metal ferrites generating a product stream comprising at least 50 vol. % CO and H2. In another embodiment, chemical looping dry reforming process where metal ferrite is reduced with a fuel and then oxidized with carbon dioxide is used for production of CO from carbon dioxide. In another embodiment, the metal ferrite is used as a promoter to produce CO continuously from coal gasification with CO2.

Siriwardane, Ranjani V.↗
DOE OSTI2023

Synthesis and Structural Study of Substituted Ternary Nitrides for Ammonia Production

Over the past few decades, inorganic nitride materials have grown in importance in part due to their potential as catalysts for the synthesis of NH 3 , a key ingredient in fertilizer and precursor to industrial chemicals. Of particular interest are the ternary (ABN) or higher-order nitrides with high metal-to-nitrogen ratios that show promise in enhancing NH 3 synthesis reaction rates and yields via heterogeneous catalysis or chemical looping. Although metal nitrides are predicted to be numerous, the stability of nitrogen triple bonds found in N 2 , especially in comparison to the metal–nitrogen bonds, has considerably hindered synthetic efforts to produce complex nitride compounds. In this study, we present an exhaustive down-selection process to identify ternary nitrides for a promising chemical looping NH 3 production mechanism. We also report on a facile and efficient two-step synthesis method that can produce well-characterized η-carbide Co 3 Mo 3 N/Fe 3 Mo 3 N or filled β-manganese Ni 2 Mo 3 N ternaries, as well as their associated quaternary, (Co,Fe) 3 Mo 3 N, (Fe,Ni) 2 Mo 3 N, and (Co,Ni) 2 Mo 3 N, solid solutions. To further explore the quaternary space, syntheses of (Co,Ni) 3 Mo 3 N (Ni ≤ 10 mol %) and Co 3 (Mo,W) 3 N (W ≤ 10 mol %) were also investigated. The structures of the nitrides were characterized via X-ray powder diffraction. The morphology and compositions were characterized with scanning electron microscopy. In conclusion, the multitude of chemically unique, but structurally related, nitrides suggests that properties such as nitrogen activity may be tunable, making the materials of great interest for NH 3 synthesis schemes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

10 MWE CDCL Large Pilot Plant – pre-FEED Study (Final Report)

The Following Document is the Final Technical Scientific Report for the project tittle “10 MWE CDCL Large Pilot Plant – pre-FEED Study” performed by The Babcock & Wilcox Company in collaboration with The Ohio State University, Johnson & Matthey, The Electric Power Research Institute, and the Dover Light & Power Municipal Power Plant. The project Team performed a pre-Front End Engineering Design study of a 10 MWe Coal-Direct Chemical Looping power plant to be hosted at the Dover Light & Power Municipal Plant. As part of the pre-FEED study, the project Team performed multiple pilot test campaigns to obtain design and performance information at the 250 kWth CDCL pilot facility at the Babcock & Wilcox Company’s Research Center. The Techno-Economic analysis was updated based on the FEED study and the pilot tests results. The study shows that the CDCL process is a promising carbon-friendly technology capable of producing electricity with a high efficiency with a cost of electricity of $83.3 / MWh, which corresponded to less than 30% increase in cost of electricity compared to the cost of electricity of a base case study of a supercritical PC boiler.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Analysis of hematite attrition in a grid jet apparatus

Particulate attrition is of interest for novel carbon-capture processes such as chemical looping combustion because the makeup cost of oxygen carrier is a significant portion of operating cost. As such, models to study and predict attrition of various oxygen carriers in fluidized bed systems are being developed. One of the regions of concern in fluidized bed systems is the high-velocity jet region near gas distributors in a fluid bed. This work studies the attrition of hematite particles using a modified ASTM apparatus to measure the particle size distribution throughout the experiment. Bed weight and gas velocity were varied. Hematite particles above the corresponding threshold value had a severe variation of particle size distributions which decreased with time. Weight fractions of the sieves over time were fit to a linear, time-variant population balance model to offer insight into particle attrition. The first-order rate constant was modified as a decaying exponential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Technoeconomic and Emissions Analysis of the Hybrid Redox Process for the Production of Acetic Acid with CO 2 Utilization

The production of oxygenated hydrocarbons, such as acetic acid, using captured CO 2 is a promising pathway to reduce greenhouse gas emissions in the chemical industry. The use of a chemical looping‐based hybrid redox process (HRP) is proposed to convert CO 2 and natural gas into separate CO and syngas streams that can be used to produce various commodity oxygenates, while allowing the beneficial utilization of captured CO 2 . Here, a detailed technoeconomic analysis of HRP applied to the production of acetic acid is presented. Emissions and energy analyses show the ability of HRP to lower the CO 2 emissions for acetic acid synthesis by 74% compared to a conventional steam and autothermal reforming route. HRP also offers a potential 34% reduction in capital costs. Compared to a dry reforming based acetic acid production route, HRP has the potential for significantly lower costs. If integrated with a low carbon energy source, HRP has the potential to achieve a negative emission of greenhouse gas (‐0.50 kg CO 2 per kg acetic acid).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗