Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Charge transfer efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Highly Responsive Near-Infrared Photodetector Based on Contactless PdSe 2 Integration with a Few-Layered MoSe 2 Field-Effect Transistor

Two-dimensional (2D) semiconductors with narrow bandgaps are promising candidates for near- and far-infrared (IR) photodetection, particularly in the telecommunication spectral window. However, current low-bandgap IR photodetectors face significant challenges due to their high dark current, increased carrier recombination, and thermally generated noise. Here, in this work, a hybrid phototransistor is demonstrated by integrating direct, contact-free palladium diselenide (PdSe 2 ) as a highly responsive IR detection layer with a non-IR-absorbing molybdenum diselenide (MoSe 2 ) field-effect transistor (FET), using a near-IR source at a wavelength of λ = 1650 nm. Exfoliated PdSe 2 flakes integrated into a back-gated FET architecture exhibit ambipolar transport behavior, with extracted hole and electron mobilities of 24.8 cm 2 V –1 s –1 and 58.4 cm 2 V –1 s –1 , respectively. The devices show a clear photocurrent generation under the illumination of a λ = 1650 nm laser source, achieving a notable responsivity of ∼300 mA W -1 at an applied gate voltage of 15 V, which highlights the suitability of PdSe 2 as a narrow-bandgap material for photodetection. Photoresponsivity saturates and does not have any effect above an applied gate voltage of 15 V. To further tune the photoresponsivity performance continuously with the applied gate voltage, we construct a van der Waals heterostructure phototransistor, where few layers of PdSe 2 are directly transferred onto the 2D channel region of a MoSe 2 FET, while avoiding any contact with the metal electrodes. In this heterostructure, PdSe 2 works as the primary active IR-absorbing layer, while MoSe 2 provides high-performance FET characteristics. This spatial separation of absorption and transport facilitates efficient interlayer charge transfer and charge separation, resulting in high responsivities of up to 972 mA W –1 at near-IR wavelengths and a low power density of 1.5 mW/mm 2 . The responsivity of our photodetector is comparable to that of some state-of-the-art commercially available NIR photodetectors, highlighting the potential of PdSe 2 -based heterostructures as scalable, CMOS-compatible platforms for high-performance near-IR detection.

Infrared (IR) photodetectors↗
DOE OSTI2022

Pt Particle Size Affects Both the Charge Separation and Water Reduction Efficiencies of CdS–Pt Nanorod Photocatalysts for Light Driven H 2 Generation

Decreasing the metal catalyst size into nanoclusters or even single atom is an emerging direction of developing more efficient and cost-effective photocatalytic systems. Because the catalyst particle size affects both the catalyst activity and light driven charge separation efficiency, their effects on the overall photocatalytic efficiency are still poorly understood. Herein, using a well-defined semiconductor–metal heterostructure with Pt nanoparticle catalysts selectively grown on the apexes of CdS nanorods (NRs), we study the effect of the Pt catalyst size on light driven H 2 generation quantum efficiency (QE H 2 ). With the increase of the Pt catalyst size from 0.7 ± 0.3 to 3.0 ± 0.8 nm, the QEH 2 of CdS–Pt increases from 0.5 ± 0.2% to 38.3 ± 5.1%, by nearly 2 orders of magnitude. Transient absorption spectroscopy measurement reveals that the electron transfer rate from the CdS NR to the Pt tip increases with the Pt diameter following a scaling law of d 5.6 , giving rise to the increase of electron transfer efficiency at larger Pt sizes. Additionally, the observed trend can be understood by a simplified kinetic model that assumes the overall efficiency is the product of the quantum efficiencies of charge separation (including hole transfer, electron transfer, and hole scavenging) and water reduction steps, and for CdS–Pt NRs, the quantum efficiencies of electron transfer and water reduction steps increase with the Pt sizes. Our findings suggest the importance of improving the quantum efficiencies of both charge separation and catalysis in designing efficient semiconductor–metal hybrid photocatalysts, especially in the regime of small metal particle sizes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Elucidating Photoinduced Processes of Photosystem I Via Multidimensional Electronic and Vibrational Spectroscopies

This project was motivated by an overarching goal to elucidate the mechanism of energy and electron transfer that governs the efficient charge separation in photosystem I (PSI) complexes. PSI is a natural light harvesting complex that drives oxygenic photosynthesis in plants, algae, and cyanobacteria. It uses ~300 tightly packed chlorophylls (Chls) to absorb photons, transfer the excitation energy to the reaction center (RC), and generate a charge separated state with near unity quantum efficiency (QE). A better understanding of the mechanism of energy transfer and charge separation in PSI is required for understanding the high QE of natural light harvesting complexes, and it could lead to the further development of artificial photosynthetic systems for solar energy conversion and modification of light harvesting complexes to improve crop yields. We applied two-dimensional optical spectroscopies to different cyanobacterial photosystem I complexes, including PSI complexes that contain Chl f molecules, to map energy transfer pathways and gain insight into the efficient light harvesting of PSI. We used two-dimensional electronic spectroscopies (2DES) to map energy transfer in Chl a and Chl f containing PSI complexes. To investigate the Chl f PSI complexes, we modified our spectrometer to probe the lower energy states associated with Chl f molecules. We interpreted the 2DES spectra through global analysis procedures to generate maps of energy transfer. We also constructed a two-dimensional electronic vibrational (2DEV) spectrometer that will be used to investigate charge transfer transitions and dynamics within PSI complexes. Measurements were performed on model systems to establish general data analysis procedures for interpreting 2D spectra and gain insight into protein cofactor interactions.

14 SOLAR ENERGY↗
DOE OSTI2023

Tracking Photochemical and Photophysical Processes for Solar Energy Conversion Via Multidimensional Visible and Vibrational Spectroscopic Methods

This project was motivated by an overarching goal to elucidate the mechanism of energy and electron transfer that governs the efficient charge separation in photosystem I (PSI) complexes. PSI is a natural light harvesting complex that drives oxygenic photosynthesis in plants, algae, and cyanobacteria. It uses ~300 tightly packed chlorophylls (Chls) to absorb photons, transfer the excitation energy to the reaction center (RC), and generate a charge separated state with near unity quantum efficiency (QE). A better understanding of the mechanism of energy transfer and charge separation in PSI is required for understanding the high QE of natural light harvesting complexes, and it could lead to the further development of artificial photosynthetic systems for solar energy conversion. We applied two-dimensional electronic spectroscopy (2DES) to different cyanobacterial photosystem I complexes to map energy transfer pathways to gain insight into the efficient light harvesting of PSI. We interpreted the 2DES spectra through a global analysis procedure, finding two ultrafast equilibration processes involving red-shifted Chl states. The analysis procedure is general and can be readily applied to other natural and artificial light harvesting systems. In addition to investigating PSI complexes, we also performed measurements on model systems to establish general data analysis procedures for interpreting 2D spectra.

14 SOLAR ENERGY↗
DOE OSTI2021

Analysis of the EMCCD point-source response using x-rays

Electron Multiplying Charge Coupled Devices, EMCCD are used as x-ray detectors. The NSLS-II Soft Inelastic x-ray Scattering (SIX) beam line has two EMCCDs for x-ray detection in the spectrometer arm. The spectrometer with high resolving power disperses x-rays vertically. The x-ray vertical position on the sensor plane is related to its energy. This allows for very accurate x-ray energy measurements through x-ray coordinates. X-rays interact with silicon and create a number of electron-hole pairs proportional to the x-ray energy. Electrons drift and diffuse toward pixel gates and are collected there. The diffused electrons form a charge cloud distributed over several neighboring pixels. This charge sharing enables coordinate measurements with accuracy better than the pixel pitch. The charge distribution shape has to be taken into account to achieve ultimate accuracy in coordinate measurements. In this paper, we present a method of the charge distribution shape analysis and demonstrate its applications. The drift and diffusion of electrons ftom the point of generation to pixel gates results in the bell-shaped electron cloud usually approximated by Gaussian shape. The number of electrons collected under a pixel is proportional to the shape function integral. These electron packets get transferred to the sense node of the output amplifier. The transfer process could introduce distortions to the original charge distribution. For example, during transfers, electrons in the packet could be exposed to traps if they are present in the sensor. The trapping and later the release processes distort the apparent shape of the charge distribution. Therefore, deviations of the charge distribution shape ftom the originally symmetrical form can indicate the presence of trap centers in the sensor and can be used for sensor diagnostics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

High-throughput ab initio design of atomic interfaces using InterMatch

Forming a hetero-interface is a materials-design strategy that can access an astronomically large phase space. However, the immense phase space necessitates a high-throughput approach for an optimal interface design. Here we introduce a high-throughput computational framework, InterMatch, for efficiently predicting charge transfer, strain, and superlattice structure of an interface by leveraging the databases of individual bulk materials. Specifically, the algorithm reads in the lattice vectors, density of states, and the stiffness tensors for each material in their isolated form from the Materials Project. From these bulk properties, InterMatch estimates the interfacial properties. We benchmark InterMatch predictions for the charge transfer against experimental measurements and supercell density-functional theory calculations. We then use InterMatch to predict promising interface candidates for doping transition metal dichalcogenide MoSe 2 . Finally, we explain experimental observation of factor of 10 variation in the supercell periodicity within a few microns in graphene/α-RuCl 3 by exploring low energy superlattice structures as a function of twist angle using InterMatch. We anticipate our open-source InterMatch algorithm accelerating and guiding ever-growing interfacial design efforts. Moreover, the interface database resulting from the InterMatch searches presented in this paper can be readily accessed online.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1977

Electrostatic analysis of charge-coupled structures

Package of three computer programs performs two-dimensional electrostatic analysis to determine efficiency of charge transfer. One program can be used to analyze three-electrode charge-coupled device input/output gates, and other two programs can be used to analyze two-phase structures containing two or four electrodes with periodic boundary conditions.

Gassaway, J. D.↗
DOE OSTI2021

Natural Charge-Transfer Analysis: Eliminating Spurious Charge-Transfer States in Time-Dependent Density Functional Theory via Diabatization, with Application to Projection-Based Embedding

For many types of vertical excitation energies, linear-response time-dependent density functional theory (LR-TDDFT) offers a useful degree of accuracy combined with unrivaled computational efficiency, although charge-transfer excitation energies are often systematically and dramatically underestimated, especially for large systems and those that contain explicit solvent. As a result, low energy electronic spectra of solution-phase chromophores often contain tens to hundreds of spurious charge-transfer states, making LR-TDDFT needlessly expensive in bulk solution. More nefariously, intensity borrowing by the low-energy charge-transfer states can affect intensities of the valence excitations even if those excitation energies are accurate. At higher excitation energies, it is difficult to distinguish spurious CT states from genuine charge-transfer-to-solvent (CTTS) excitations. In this work, we introduce an automated diabatization scheme that enables fast and effective screening of the CTTS acceptor space in bulk solution. Our procedure introduces the concept of “natural charge-transfer orbitals”, which provide a means to isolate characteristic pairs of orbitals that are most likely to participate in a CTTS excitation. The projection of these orbitals onto solvent-centered virtual orbitals provides a criterion for defining the most important solvent molecules in a given excitation. We apply this method to analyze an ab initio molecular dynamics (MD) trajectory of I-(aq) and report the lowest-energy CTTS band in the absorption spectrum. Our results are in excellent agreement with experimental measurements for bulk I-(aq), and only one-third of the water molecules in the I-(H2O)96 simulation cell need to be described with LR-TDDFT in order to obtain excitation energies that are converged to < 0.1 eV. The tools introduced herein will improve the accuracy, efficiency, and usability of LR-TDDFT in solution-phase environments

Carter-Fenk, Kevin D.↗
DOE OSTI2021

Highly Efficient Plasmon Induced Hot-Electron Transfer at Ag/TiO 2 Interface

Plasmon induced hot carrier transfer is a promising novel approach for solar energy conversion, but its practical application is often hindered by its low efficiency. This work demonstrates an unprecedented quantum efficiency of plasmonic hot-electron transfer of up to 53 ± 2% from 1.7 nm silver nanoparticles to anatase nanoporous TiOsub>2 films at 400 nm excitation. This efficient hot-electron transfer consists of contributions of both hot electrons generated by plasmon decay through exciting Ag intraband transitions and Ag-to-TiO 2 interfacial charge-transfer transitions. The efficiencies of both pathways increase at smaller Ag particle sizes from 5.9 to 1.7 nm, suggesting that decreasing particle sizes is a promising way toward efficient plasmonic hot-carrier extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Modulating Mid-Gap Electronic States Through Site-Selective Modification in B-Pbx/B'-CuyV2O5/CdS Heterostructures for Photocatalytic Hydrogen Evolution

We interfaced ..beta..-Pbx/..beta..'-CuyV2O5 compounds, with varying stoichiometries of precisely positioned Pb-ions (x) and Cu-ions (y) in interstitial sites along a tunnel-structured ?-V2O5 framework, with cysteine-capped CdS (cysCdS) quantum dots (QDs) to yield heterostructured photocatalysts. ..beta..-Pbx/..beta..'-CuyV2O5 compounds exhibit midgap electronic states with orbital contributions from both Cu 3d and stereochemically active Pb 6s states that show distinctive light-initiated reactivity with photoexcited QDs. ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures were prepared by linker-assisted assembly (LAA). Scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Raman spectroscopy revealed that cysCdS QDs were deposited onto surfaces of ..beta..-Pbx/..beta..'-CuyV2O5 via LAA. HAXPES revealed that the site-selective positioning of Pb-ions and Cu-ions promoted close energetic alignment of the midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds with the valence-band maximum of cysCdS QDs. Transient absorption spectroscopy revealed that photogenerated holes were transferred from CdS QDs to midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds on time scales <50 ps. Finally, photoelectrochemical and photochemical experiments revealed that ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the photocatalytic reduction of H+ to H2. In photoelectrochemical experiments, under oxidative conditions, for all ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at a Pt counter electrode while a sacrificial donor was oxidized at the heterostructure-functionalized working electrode. In contrast, under reductive conditions, for ..beta..-Pb0.152V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, H2 was evolved at the working electrode. In photochemical experiments, dispersed ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures promoted the reduction of H+ to H2 under white-light illumination; ..beta..'-Cu0.55V2O5/CdS and ..beta..-Pbx/..beta..'-CuyV2O5/CdS heterostructures, for which midgap states have Cu 3d orbital character, generated 2-fold more H2 than ..beta..-Pb0.152V2O5/CdS heterostructures. Cu-ion insertion thus appends additional acceptor surface states that improve ligand-mediated hole transfer from photoexcited QDs, but such states are intrinsically limited in mediating hole transport to the substrate as a result of the low mobility of holes in narrow Cu 3d-states. Our results reveal that the density and orbital character of midgap states of ..beta..-Pbx/..beta..'-CuyV2O5 compounds, tunable through recently developed site-selective ion insertion strategies, determine efficiencies of charge-transfer and charge-transport mechanisms that underpin photocatalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Differentiable modeling and optimization of non-aqueous Li-based battery electrolyte solutions using geometric deep learning

Electrolytes play a critical role in designing next-generation battery systems, by allowing efficient ion transfer, preventing charge transfer, and stabilizing electrode-electrolyte interfaces. In this work, we develop a differentiable geometric deep learning (GDL) model for chemical mixtures, DiffMix, which is applied in guiding robotic experimentation and optimization towards fast charging battery electrolytes. In particular, we extend mixture thermodynamic and transport laws by creating GDL-learnable physical coefficients. We evaluate our model with mixture thermodynamics and ion transport properties, where we show improved prediction accuracy and model robustness of Diff-Mix than its purely data-driven variants. Furthermore, with a robotic experimentation setup, Clio, we improve ionic conductivity of electrolytes by over 18.8% within 10 experimental steps, via differentiable optimization built on DiffMix gradients. By combining GDL, mixture physics laws, and robotic experimentation, DiffMix expands the predictive modeling methods for chemical mixtures and enables efficient optimization in large chemical spaces.

25 - ENERGY STORAGE↗
DOE OSTI2020

Balancing Charge Transfer and Frenkel Exciton Coupling Leads to Excimer Formation in Molecular Dimers: Implications for Singlet Fission

Photoexcitation of molecular chromophore aggregates can form excimer states that play a significant role in photophysical processes such as charge and energy transfer as well as singlet fission. An excimer state is commonly defined as a superposition of Frenkel exciton and charge transfer states. In this work, we investigate the dynamics of excimer formation and decay in π-stacked 9,10-bis(phenylethynyl)anthracene (BPEA) covalent dimers appended to a xanthene spacer, where the electronic coupling between the two BPEA molecules is adjusted by changing their longitudinal molecular slip distances. Using exciton coupling calculations, we quantify the relative contributions of Frenkel excitons and charge transfer states and find that there is an upper and lower threshold of the charge transfer contribution for efficient excimer formation to occur. In conclusion, knowing these thresholds can aid the design of molecular aggregates that optimize singlet fission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fabrication of α-Fe 2 O 3 Nanoparticles/g-C 3 N 4 Direct Z-Scheme Heterojunction of Durable Photocatalytic Activity

The fabrication of a nanohybrid photocatalyst that combines α-Fe 2 O 3 nanoparticles with graphitic carbon nitride (g-C 3 N 4 ) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe 2 O 3 /g-C 3 N 4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe 2 O 3 and g-C 3 N 4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe 2 O 3 nanoparticles on g-C 3 N 4 . A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe–N and C–N/C–O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe 2 O 3 nanoparticles on the g-C 3 N 4 sheets. Careful control of the FeCl 3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Surface immobilized copper(i) diimine photosensitizers as molecular probes for elucidating the effects of confinement at interfaces for solar energy conversion

Heteroleptic copper(I) bis(phenanthroline) complexes with surface anchoring carboxylate groups have been synthesized and immobilized on nanoporous metal oxide substrates. The species investigated are responsive to the external environment and this work provides a new strategy to control charge transfer processes for efficient solar energy conversion.

14 SOLAR ENERGY↗
DOE OSTI2021

Vibronic coupling in light-harvesting complex II revisited

A growing body of work has pointed to vibronic mixing as a crucial design principle for efficient energy and charge transfer in natural and artificial systems.= Notable among these studies was the recent observation of vibronically promoted ultrafast energy flow in the major antenna complex of green plants and algae light-harvesting complex II (LHCII)—the most abundant membrane protein on the Earth—via the emerging experimental technique two-dimensional electronic-vibrational (2DEV) spectroscopy. This spectroscopy, which correlates electronic and nuclear degrees-of-freedom, shows promise for providing mechanistic insight into vibronic coupling; however, explicit theoretical input is necessary to extract such a detail. In a separate paper, we have developed a heterodimer model that describes various forms of vibronic coupling—which were speculated to be present in LHCII—resulting from diagonal electron–phonon coupling giving Franck–Condon (FC) activity and the nuclear dependence of the electronic transition dipole moment giving Herzberg–Teller (HT) activity. Here, we draw connections between this theoretical work and recent experimental studies in order to demonstrate how HT activity is leveraged in the function of LHCII.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Modulating Hole Transfer from CdSe Quantum Dots by Manipulating the Surface Ligand Density

The structure and density of surface capping ligands in cadmium chalcogenide quantum dots (QDs) are important considerations for controlling the efficiency of charge separation via the transfer of electrons or holes to molecular acceptors. Here we show how the manipulation of the surface ligand density of oleic acid-capped cadmium selenide (CdSe) QDs impacts the efficiency of hole transfer (HT) to polyoxovanadate alkoxides. Meerwein’s salt is used as a ligand-stripping agent, providing opportunities to quantitatively manipulate the ligand density at the surface of the nanocrystal, as evidenced by 1 H NMR spectroscopy. Time-resolved photoluminescence and transient absorption spectroscopies reveal that the extent of HT is quantitatively related to increased surface accessibility. Collectively, these results show that the reduction of surface ligand density can be used to tune the extent of interactions of molecular acceptors with QDs, providing a route to control charge-transfer processes relevant to improving the efficiency of QDs as photosensitizers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗