On flow past a cascade of partially cavitating cambered blades
Boundary value problems for incompressible inviscid flow past partially cavitating cascade of cambered blades
Hsu, C. C.↗
SEARCH · Engineering Papers
Results for “Camber”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Section data for thin, highly cambered airfoils in incompressible flow
Aerodynamic characteristics of thin, highly cambered airfoils in incompressible flow
Milgram, J. H.↗
Calculation of camber using slender wing theory at Mach number 1.0
Calculation of mean line camber oridinates for laterally symmetrical wings with polygonal planforms
Igoe, W. B.↗
Unsteady lift forces on highly cambered airfoils moving through a gust
An unsteady airfoil theory in which the flow is linearized about the steady potential flow of the airfoil is presented. The theory is applied to an airfoil entering a gust. After transformation to the W-plane, the problem is formulated in terms of a Poisson's equation. The solutions are expanded in a Fourier-Bessel series. The theory is applied to a circular arc with arbitrary camber. Closed form expressions for the velocity and pressure on the surface of the airfoil are obtained. The unsteady aerodynamic forces are then calculated and shown to contain two terms. One in an explicit closed analytical form represents the contribution of the oncoming vortical disturbance, the other depends on a single quadrature and accounts for the effect of the wake.
Atassi, H.↗
Subsonic and supersonic aerodynamic characteristics of a supersonic cruise fighter model with a twisted and cambered wing with 74 deg sweep
A wind tunnel investigation has been conducted to determine the longitudinal and lateral aerodynamic characteristics of a model of a supersonic cruise fighter configuration with a design Mach number of 2.60. The configuration is characterized by a highly swept arrow wing twisted and cambered to minimize supersonic drag due to lift, twin wing mounted vertical tails, and an aft mounted integral underslung duel-engine pod. The investigation also included tests of the configuration with larger outboard vertical tails and with small nose strakes.
Morris, O. A.↗
Aerodynamic characteristics of an F-8 aircraft configuration with a variable camber wing at Mach numbers from 0.70 to 1.15
A 0.1-scale model of an F-8 aircraft was tested in the Ames 14-Foot Transonic Wind Tunnel at Mach numbers from 0.7 to 1.15. Angle of attack was varied from -2 deg. to 22 deg. at sideslip angles of 0 deg and -5 deg. Reynolds number, dictated by the atmospheric stagnation pressure, varied with Mach number from 3.4 to 4.0 million based on mean aerodynamic chord. The model was configured with a wing designed to simulate the downward deflection of the leading and trailing edges of an advanced-technology-conformal-variable camber wing. This wing was also equipped with conventional (simple hinge) flaps. In addition, the model was tested with the basic F-8 wing to provide a reference for extrapolating to flight data. In general, at all Mach numbers the use of conformal flap deflections at both the leading edge and trailing edge resulted in slightly higher maximum lift coefficients and lower drag coefficients than with the use of simple hinge flaps. There were also found to be small improvements in the pitching-moment characteristics with the use of conformal flaps.
Boltz, F. W.↗
Aerodynamic characteristics of an F-8 aircraft configuration with a variable camber wing at Mach numbers from 1.5 to 2.0
A 0.1-scale model of an F-8 aircraft was tested over a range of Mach numbers from 1.5 to 2.0. Reynolds number of 4.12 million was based on wing mean-aerodynamic chord for angles of attack varying from -2 deg to +12 deg. The model was equipped with an advanced-technology-conformal-variable-camber wing (ATCVCW) having simple hinge flaps. Data were also obtained for the model equipped with the basic F-8 wing and conventional flaps. Model variables included aileron and wing trailing edge deflections and horizontal tail incidence. The ATCVCW configuration produced slight improvements in lift-curve slope, drag, and static longitudinal stability over that of the basic F-8 wing configuration. Flap effectiveness was essentially the same for both wings.
Boltz, F. W.↗
Effect of camber on the trimmed lift capability of a close-coupled canard-wing configuration
A close-coupled canard-wing configuration was tested in the Langely high-speed 7 by 10 foot tunnel at a Mach number of 0.30 to determine the effect of changing wing camber on the trimmed lift capability. Trimmed lift coefficients of near 2.0 were attained; however, the data indicated that the highest buffet-free trimmed lift coefficient attainable was approximately 1.30. The buffet used in this investigation were qualitative in nature and gave no indication of buffet intensity. Thus, the trimmed lift coefficient of near 2.0 might be attainable if the buffet intensity was not too high. The data showed that there was approximately a 10 percent variation in drag coefficient, for different model configurations, at a given trimmed lift coefficient. Large increases in wing lift had only small effects on canard lift.
Gloss, B. B.↗
Airplane wing leading edge variable camber flap
The invention and design of an aerodynamic high lift device which provided a solution to an aircraft performance problem are described. The performance problem of converting a high speed cruise airfoil into a low speed aerodynamic shape that would provide landing and take-off characteristics superior to those available with contemporary high lift devices are addressed. The need for an improved wing leading edge device that would complement the high lift performance of a triple slotted trailing edge flap is examined. The mechanical and structural aspects of the variable camber flap are discussed and the aerodynamic performance aspects only as they relate to the invention and design of the device are presented.
Cole, J. B.↗
Calculation of vortex lift effect for cambered wings by the suction analogy
An improved version of Woodward's chord plane aerodynamic panel method for subsonic and supersonic flow is developed for cambered wings exhibiting edge separated vortex flow, including those with leading edge vortex flaps. The exact relation between leading edge thrust and suction force in potential flow is derived. Instead of assuming the rotated suction force to be normal to wing surface at the leading edge, new orientation for the rotated suction force is determined through consideration of the momentum principle. The supersonic suction analogy method is improved by using an effective angle of attack defined through a semi-empirical method. Comparisons of predicted results with available data in subsonic and supersonic flow are presented.
Lan, C. E.↗
The influence of leading-edge thrust on twisted and cambered wing design for supersonic cruise
A study of leading-edge thrust phenomena at supersonic speeds has shown that although these forces are not large, they can be a significant factor in the design of wings for supersonic cruise. It is seen that the rather severe twisted and cambered wing surfaces resulting from the application of present design methods, which ignore leading-edge thrust, can be replaced by more moderate surfaces with little or no loss in aerodynamic efficiency if realistic possibilities for the attainment of some fraction of the theoretical thrust are taken into account.
Carlson, H. W.↗
Aerodynamic characteristics of 10 percent thick NASA supercritical airfoils with different aft camber
The aerodynamic characteristics of several supercritical airfoils interim to the improved 10-percent thick NASA supercritical airfoil 26a are discussed. The airfoils have related slope and curvature distributions over the rear which result in different aft camber. For identification, the airfoils are designated supercritical airfoils 12, 13, 21, 22, and 24. Data is presented without analysis.
Harris, C. D.↗
Aerodynamic data from a two-dimensional cambered airfoil section in a shallow transonic flexible walled test section
Further flexible wall technique validation in two dimensional testing was carried out with the transonic self streamlining wind tunnel (TSWT) using a cambered NPL 9510 section.
Wolf, S. W. D.↗
Aerodynamic characteristics of a series of bodies with variations in nose camber
The aerodynamic characteristics of a series of cambered forebody models having a systematic variation in nose droop angle were determined from tests in the Langley 8-Foot Transonic Pressure Tunnel at Mach numbers from 0.60 to 1.20 and in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.47, 1.80, and 2.16. The models were tested through an angle-of-attack range of about 0 deg to 12 deg in the 8-Foot Transonic Pressure Tunnel and -2 deg to 20 deg in the Unitary Plan Wind Tunnel. Static longitudinal aerodynamic characteristics of the models were determined for all Mach numbers, and lateral-directional characteristics were determined for Mach numbers of 1.47 to 2.16. The investigation indicated that the principal effect of varying nose droop was on pitching moment, with some secondary effects on lift and drag. The experimental data were also compared with theoretical estimates.
Shrout, B. L.↗
The investigation of a variable camber blade lift control for helicopter rotor systems
A new rotor configuration called the variable camber rotor was investigated numerically for its potential to reduce helicopter control loads and improve hover performance. This rotor differs from a conventional rotor in that it incorporates a deflectable 50% chord trailing edge flap to control rotor lift, and a non-feathering (fixed) forward portion. Lift control is achieved by linking the blade flap to a conventional swashplate mechanism; therefore, it is pilot action to the flap deflection that controls rotor lift and tip path plane tilt. This report presents the aerodynamic characteristics of the flapped and unflapped airfoils, evaluations of aerodynamics techniques to minimize flap hinge moment, comparative hover rotor performance and the physical concepts of the blade motion and rotor control. All the results presented herein are based on numerical analyses. The assessment of payoff for the total configuration in comparison with a conventional blade, having the same physical characteristics as an H-34 helicopter rotor blade was examined for hover only.
Awani, A. O.↗
VORCAM: A computer program for calculating vortex lift effect of cambered wings by the suction analogy
A user's guide to an improved version of Woodward's chord plane aerodynamic panel computer code is presumed. The guide can be applied to cambered wings exhibiting edge separated flow, including those with leading edge vortex flow at subsonic and supersonic speeds. New orientations for the rotated suction force are employed based on the momentum principal. The supersonic suction analogy method is improved by using an effective angle of attack defined through a semiempirical method.
Lan, C. E.↗
Thickness and camber effects in slender wing theory
It is noted that the flow past thin slender wings with round leading edges can remain attached up to moderate values of angle of attack. In the low aspect ratio limit, the slender wing theory of Jones (1946) can therefore provide a simple analytical tool for studying this flow. First-order corrections to slender wing theory due to spanwise thickness and camber are developed. For wings of general planform, the validity and applicability of slender wing theory have recently been extended with the addition of chordwise and compressibility corrections by Levin and Seginer (1982). It is believed that similar corrections can be applied to the present results.
Plotkin, A.↗
Pressure measurements on a thick cambered and twisted 58 deg delta wing at high subsonic speeds
A pressure experiment at high subsonic speeds was conducted by a cambered and twisted thick delta wing at the design condition (Mach number 0.80), as well as at nearby Mach numbers (0.75 and 0.83) and over an angle-of-attack range. Effects of twin vertical tails on the wing pressure measurements were also assessed. Comparisons of detailed theoretical and experimental surface pressures and sectional characteristics for the wing alone are presented. The theoretical codes employed are FLO-57, FLO-28, PAN AIR, and the Vortex Lattice Method-Suction Analogy.
Chu, Julio↗