Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CITRIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

The origin of intermediary metabolism

The core of intermediary metabolism in autotrophs is the citric acid cycle. In a certain group of chemoautotrophs, the reductive citric acid cycle is an engine of synthesis, taking in CO(2) and synthesizing the molecules of the cycle. We have examined the chemistry of a model system of C, H, and O that starts with carbon dioxide and reductants and uses redox couples as the energy source. To inquire into the reaction networks that might emerge, we start with the largest available database of organic molecules, Beilstein on-line, and prune by a set of physical and chemical constraints applicable to the model system. From the 3.5 million entries in Beilstein we emerge with 153 molecules that contain all 11 members of the reductive citric acid cycle. A small number of selection rules generates a very constrained subset, suggesting that this is the type of reaction model that will prove useful in the study of biogenesis. The model indicates that the metabolism shown in the universal chart of pathways may be central to the origin of life, is emergent from organic chemistry, and may be unique.

Non-NASA Center↗

Synthesis and characterization of Gd{sup 3+} and Nd{sup 3+} co-doped ceria by using citric acid-nitrate combustion method

A series of Ce{sub 0.8}Gd{sub 0.2-x}Nd{sub x}O{sub 2-{delta}} (x = 0-0.20) compositions have been synthesized by citric acid-nitrate combustion method. XRD measurements indicate that all the obtained materials crystallized in cubic fluorite-type structure. Lattice parameters were calculated by Rietveld method and the parameter a values in Ce{sub 0.8}Gd{sub 0.2-x}Nd{sub x}O{sub 2-{delta}} system obey Vegard's law, a (A) = 5.4224 + 0.1208x. The obtained powders have good sinterability and the relative density could reach above 95% after being sintered at 1400 {sup o}C. Impedance spectroscopy measurements indicated that the conductivity of Ce{sub 0.8}Gd{sub 0.2-x}Nd{sub x}O{sub 2-{delta}} first increased and then decreased with Nd dopant content x. The maximum conductivity, {sigma}{sub 700{sup o}C} = 6.26 x 10{sup -2} S/cm, was found in Ce{sub 0.8}Gd{sub 0.12}Nd{sub 0.08}O{sub 1.9} when sintered at 1300 {sup o}C. The corresponding activation energies of conduction had a minimum value E{sub a} = 0.676 eV. The results tested experimentally the validity of the effective atomic number concept of recent density functional theory, which had suggested that co-dopant with effective atomic number between 61 (Pm) and 62 (Sm) was the ideal dopant exhibiting high ionic conductivity and low activation energy.

36 MATERIALS SCIENCE↗

Solution combustion synthesis of iron-based alumina catalysts for dehydrogenation of fossil fuels

Microwave-assisted thermocatalytic dehydrogenation of fossil fuels has been proposed as a method for hydrogen production with no CO2 emissions. The byproduct is carbon, which has a commercial value. Iron-based alumina nanocomposites are promising catalysts for this process as they both absorb microwave radiation and catalyze the dehydrogenation. In addition, they may have magnetic properties, which could be used for their separation from the carbon byproduct. Solution combustion synthesis (SCS) is an attractive technique for the fabrication of iron-based alumina nanocomposites because it can produce high specific surface area oxides in a facile manner. However, the effects of the heating mode, the fuel, and the iron/aluminum ratio on the combustion synthesis behavior and the product properties have not been studied yet. In the present work, the iron-based alumina nanocomposites were obtained by SCS using a hotplate, a muffle furnace, and a microwave oven. The initial mixtures were aqueous solutions of iron nitrate, aluminum nitrate, and an organic fuel. The concentrations of the two nitrates were varied in proportion to Fe:Al molar ratios of 1:2, 1:1, and 2:1. Two fuels were tested: citric acid and glycine. The combustion was less vigorous when citric acid was used as the fuel, which is explained by the lower exothermicity of the reaction. X-ray diffraction analysis of the products confirmed the formation of complex oxides of Fe and Al, specifically it detected hercynite and magnetite phases. Brunauer-Emmett-Teller surface area analysis has shown that the powders obtained using citric acid have specific surface areas as high as 276 m2/g, significantly higher than those obtained using glycine. Muffle furnace and hotplate heating led to comparable specific surface areas, while microwave heating resulted in significantly lower specific surface areas. The magnetic properties of the products increase with increasing the Fe/Al molar ratio from 1:2 (no response to a magnetic field) to 1:1 (weak response) and 2:1 (strong response).

solution combustion synthesis, nanoscale oxides, f↗

InSb thin films grown by electrodeposition

We have grown InSb thin films on Cu substrates using the electrodeposition technique. The electrochemical bath from which the InSb thin films were grown was made up of a mixture of aqueous solutions of 0.05 M InCl{sub 3} and 0.03M SbCl{sub 3}, 0 .20M citric acid and 0.30M sodium citrate. Citric acid and sodium citrate were used as complexing agents to bring the reduction potential of In and Sb closer to maintain binary growth. The electrodeposited films were characterized by structural, morphological and optical studies. X-ray diffraction studies show that the films are polycrystalline InSb having the zinc blende structure. Scanning electron microscopy (SEM) studies reveal that the surface of the films is uniformly covered with submicron sized spherical particles. FTIR spectra of InSb thin films show a sharp absorption peak at wave number 1022 cm{sup −1} corresponding to the band gap. Hot probe analysis shows that the InSb thin films have p type conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Studies of Nano-crystalline Ferrites MFe{sub 2}O{sub 4} (M = Zn, Ni, Cu, and Co) Synthesized Via Citrate Gel Autocombustion Method

Nano-crystalline ferrites with the chemical formula MFe{sub 2}O{sub 4} (M = Zn, Ni, Cu, and Co) were synthesized via autocombustion route with citric acid as fuel. The ratio of citric acid to metal nitrate was taken as 1:1. The synthesized samples were characterized by powder X-ray diffraction and far-IR spectroscopy. The measured lattice constants and observed characteristic IR absorption bands of all samples were in good agreement with the reported values and showed the formation of a cubic spinel structure. The crystallite sizes of all samples were determined using high-intensity peaks and a W-H plot. The crystallite sizes of all samples were observed to be in the range of 16–26 nm with the least crystallite size of 16.8 nm for copper ferrite. All structural parameters were calculated using an experimental lattice constant and an oxygen positional parameter and correlated with far-IR results. Zinc and copper owing to their large cation radii showed the expansion of the lattice in view of the oxygen positional parameter. Magnetic measurements were carried out using a vibrating sample magnetometer at room temperature, and parameters such as saturation magnetization, coercivity, remanence, squareness ratio, and Bohr magnetons were calculated. Among all synthesized nano-ferrites, cobalt nano-ferrite showed the highest saturation magnetization of 41 emu/g, whereas zinc ferrite displayed a low saturation magnetization value of 12.87 emu/g.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Metals in paints on chopsticks: Solubilization in simulated saliva, gastric, and food solutions and implication for human health

Highlights: • Extremely high metal concentrations were observed in paints on some chopsticks. • Significantly higher metal concentration in paints on stainless steel than wood chopsticks. • Higher metal concentration in red and green paints. • Significantly higher metal migration in 0.07 M HCl and 1% citric acid than in saliva. • Extremely high Pb and Cd in stainless steel chopsticks were health risk. Paints are often used on chopsticks, however, a paucity of studies has assessed metals in the paints and the associated health risk. In this study, total Pb, Cd, Cr, Co, and Ni concentrations in paints were assessed for 72 wood and 29 stainless steel chopsticks with different colors while metal solubilization from paints in simulated saliva, 0.07 M HCl, and 1% citric acid solutions was measured for 9 samples having total Pb > 90 mg kg{sup –1}, representing exposure scenarios of mouthing, incidental paint ingestion, and metal migration in food. Results showed that Pb (0.12–500,000 mg kg{sup –1}), Cd (0.002–120,000 mg kg{sup –1}), Cr (2.2–8400 mg kg{sup –1}), Co (0.004–2600 mg kg{sup –1}), and Ni (0.10–150,000 mg kg{sup –1}) concentrations varied considerably among paint samples. Most samples showed low metal concentrations, however, high metal concentrations were observed in red and green paints on stainless steel chopsticks, while paints on wood chopsticks showed lower metal concentrations. Estimation of daily metal intakes incorporating metal solubilization data in saliva, 0.07 M HCl, and 1% citric acid solutions suggested that the health risk via saliva contact was negligible, while unacceptable health risk was observed for Pb and Cd via their solubilization in 0.07 M HCl and 1% citric acid solutions from paints with high Pb and Cd concentrations. To avoid Pb and Cd exposure, use of metal-based paints on chopsticks should be banned, particularly in countries where food is regularly consumed with chopsticks.

54 ENVIRONMENTAL SCIENCES↗

Improving Cotton Embryo Culture by Simulating In Ovulo Nutrient and Hormone Levels

Plant ovules provide zygotes with a physicochemical environment that supports embryo differentiation, growth, and maturation. The exact nature of this embryogenesis-enabling environment is not well characterized, as evidenced by failed attempts to induce normal embryony from zygotes or proembryos (precotyledonary) on defined media. To identify factors required for cotton (Gossypium hirsutum L.) zygotic embryony in vitro, we previously performed chemical and dissolved oxygen tension analyses of cotton ovule fluids and tissues at multiple stages of embryony in situ. Based on these analyses, we report herein the development of procedures that normalize embryo differentiation, growth, maturation, and germination in vitro, starting with proembryos. Our medium differed from Murashige and Skoog (MS) medium as follows (percentage of MS): N (30%, mostly from ten amino acids), P (815%), K (237%), Mg (85%), Ca (267%), S (506%), Fe (88%), and myoinositol (883%). Levels of other MS nutrients and vitamins, except sucrose, were kept at MS levels. Additionally, we included 100 mg L-1 casein hydrolysate plus the following (mmol L-1): d-glucose (1.8), fructose (4.7), sucrose (62.0), arabinose (7.1), melibiose (3.5), malic acid (11.6), and citric acid (3.8). Mannitol was added to achieve a medium osmotic potential of -1.10 MPa, and an atmospheric O2 tension of 3.3 mol m-3 at the surface of embryos was maintained during culture. When cultured on medium containing 8.0 µmol L-1 indole-3-acetic acid, 80-90% of proembryos (as small as 100 cells) of cultivars HS-26 and B-27 increased four- to eightfold in surface area during the first 18 d in culture and germinated thereafter to produce viable plants. Increases in surface area of proembryos cultured on a modified MS medium previously used for somatic embryogenesis were from 0.2- to 0.6-fold. The described embryo culture medium should be useful for studying nutritional and molecular aspects of early embryony and possibly for plant zygote transformation protocols.

59 BASIC BIOLOGICAL SCIENCES↗

Monitoring/Verification using DMS: TATP Example

Field-rugged and field-programmable differential mobility spectrometry (DMS) networks provide highly selective, universal monitoring of vapors and aerosols at detectable levels from persons or areas involved with illicit chemical/biological/explosives (CBE) production. CBE sensor motes used in conjunction with automated fast gas chromatography with DMS detection (GC/DMS) verification instrumentation integrated into situational operations management systems can be readily deployed and optimized for changing application scenarios. The feasibility of developing selective DMS motes for a 'smart dust' sampling approach with guided, highly selective, fast GC/DMS verification analysis is a compelling approach to minimize or prevent the use of explosives or chemical and biological weapons in terrorist activities. Two peroxide-based liquid explosives, triacetone triperoxide (TATP) and hexamethylene triperoxide diamine (HMTD), are synthesized from common chemicals such as hydrogen peroxide, acetone, sulfuric acid, ammonia, and citric acid (Figure 1). Recipes can be readily found on the Internet by anyone seeking to generate sufficient quantities of these highly explosive chemicals to cause considerable collateral damage. Detection of TATP and HMTD by advanced sensing systems can provide the early warning necessary to prevent terror plots from coming to fruition. DMS is currently one of the foremost emerging technologies for the separation and detection of gas-phase chemical species. This is due to trace-level detection limits, high selectivity, and small size. DMS separates and identifies ions at ambient pressures by utilizing the non-linear dependence of an ion's mobility on the radio frequency (rf) electric field strength. GC is widely considered to be one of the leading analytical methods for the separation of chemical species in complex mixtures. Advances in the technique have led to the development of low-thermal-mass fast GC columns. These columns are capable of completing runs in less than 3 minutes. Fast GC columns are also more compact than their traditional counterparts. An earlier collaborative effort involving these authors optimized a handheld, fast GC/DMS, equipped with a non-rad ionization source, for the detection of TATP (Figure 2). The unit combines the separation capabilities of GC with the selectivity of DMS. Analytes are identified both by their elution time from the column and by the characteristic response in the DMS spectrum. Analysis times required to obtain results for these analytes are approximately 80 seconds for TATP and 160 seconds for HMTD (Figure 3). The limit of detection for both TATP and HMTD is approximately 1 ng/{micro}L. Substances that could interfere with the detection of peroxide-based explosives have been studied. Both the GC elution time and the DMS spectral peak locations were unique and do not hinder the detection of either TATP or HMTD.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Alternative to Nitric Acid Passivation

The Ground Systems Development and Operations (GSDO) Program at NASA John F. Kennedy Space Center (KSC), Florida, has the primary objective of modernizing and transforming the launch and range complex at KSC to benefit current and future NASA programs along with other emerging users. Described as the launch support and infrastructure modernization program in the NASA Authorization Act of 2010, the GSDO Program will develop and implement shared infrastructure and process improvements to provide more flexible, affordable, and responsive capabilities to a multi-user community. In support of NASA and the GSDO Program, the objective of this project is to qualify citric acid as an environmentally-preferable alternative to nitric acid for passivation of stainless steel alloys. This project is a direct follow-on to United Space Alliance (USA) work at KSC to optimize the parameters for the use of citric acid and verify effectiveness. This project will build off of the USA study to further evaluate citric acids effectiveness and suitability for corrosion protection of a number of stainless steels alloys used by NASA, the Department of Defense (DoD), and the European Space Agency (ESA).

stainless steel↗

A series of M-M' heterometallic coordination polymers: syntheses, structures and surface photoelectric properties (M=Ni/Co, M'=Cd/Zn)

Four new heterometallic polymers, [NiCd(mal){sub 2}(H{sub 2}O){sub 2}]n.2nH{sub 2}O 1, [NiZn{sub 2}(Hcit){sub 2}(H{sub 2}O){sub 2}]n 2, [CoCd{sub 2}(Hcit){sub 2}(H{sub 2}O){sub 2}]n 3, [CoZn{sub 2}(Hcit){sub 2}(H{sub 2}O){sub 2}]n 4 (H{sub 2}mal=malonic acid, H{sub 4}cit=citric acid) were synthesized and characterized. The photoelectric properties of the polymers were discussed by the surface photovoltage spectroscopy (SPS). The structural analyses indicate 1 is a Ni-Cd heterometallic polymer with 3D structure bridged by the mal{sup 2-} group. 2-4 are all heterometallic polymers with 2D structures bridged by the Hcit{sup 3-} group. The results of SPS for the four polymers reveal that there are wide photovoltage response bands in the range of 300-800 nm, which indicates that they all possess photoelectric conversion properties. By the introduction of the other metals, the SPS of heterometallic polymers are broadened obviously than the SPS of monometallic complexes. Moreover, the relationships between SPS and UV-Vis absorption spectra have been discussed. -- Graphical Abstract: Four heterometallic polymers, Ni-Cd, Ni-Zn, Co-Cd, Co-Zn, were synthesized and characterized. The photoelectric properties of heterometallic polymers were discussed by SPS. The introduction of heterometallic ions will broaden the SPS of corresponded monometallic complexes. Display Omitted highlights: > Four new heterometallic coordination polymers were reported. > The surface photoelectric properties of heterometallic polymers were studied by SPS. > They all possess photoelectric conversion properties. > The SPS of heterometallic polymers are broadened than that of monometallic complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predictions of diffusion rates of large organic molecules in secondary organic aerosols using the Stokes–Einstein and fractional Stokes–Einstein relations

Information on the rate of diffusion of organic molecules within secondary organic aerosol (SOA) is needed to accurately predict the effects of SOA on climate and air quality. Diffusion can be important for predicting the growth, evaporation, and reaction rates of SOA under certain atmospheric conditions. Often, researchers have predicted diffusion rates of organic molecules within SOA using measurements of viscosity and the Stokes–Einstein relation ($D∝1/η$, where D is the diffusion coefficient and η is viscosity). However, the accuracy of this relation for predicting diffusion in SOA remains uncertain. Using rectangular area fluorescence recovery after photobleaching (rFRAP), we determined diffusion coefficients of fluorescent organic molecules over 8 orders in magnitude in proxies of SOA including citric acid, sorbitol,and a sucrose–citric acid mixture. These results were combined with literature data to evaluate the Stokes–Einstein relation for predicting the diffusion of organic molecules in SOA. Although almost all the data agree with the Stokes–Einstein relation within a factor of 10, a fractional Stokes–Einstein relation ($D∝1/η^ξ$) with ξ =0.93 is a better model for predicting the diffusion of organic molecules in the SOA proxies studied. In addition, based on the output from a chemical transport model, the Stokes–Einstein relation can overpredict mixing times of organic molecules within SOA by as much as 1 order of magnitude at an altitude of ~3 km compared to the fractional Stokes–Einstein relation with ξ =0.93. These results also have implications for other areas such as in food sciences and the preservation of biomolecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Incorporation of alpha-Ketoglutaric Acid as a Fixed Bed Scrubber Media for the Neutralization of Hydrazine Family Hypergolic Fuels

A candidate scrubber media, alpha-ketoglutaric acid (aKGA) adsorbed onto a silica-based substrate was examined as a potential alternative to the hydrazine-family hypergolic fuel neutralization techniques currently utilized at NASA/Kennedy Space Center (KSC). Helvenson et. al. has indicated that aKGA will react with hydrazines to produce non-hazardous, possibly biodegradable products. Furthermore, the authors have previously tested and demonstrated the use of aKGA aqueous solutions as a replacement neutralizing agent for citric acid, which is currently used as a scrubbing agent in liquid scrubbers at KSC. Specific properties examined include reaction efficiency, the loading capacity of aKGA onto various silica substrates, and the comparison of aKGA media performance to that of the citric acid vapor scrubber systems at KSC and a commercial vapor scrubber media. Preliminary investigations showed hydrophobic aerogel particles to be an ideal substrate for the deposition of the aKGA. Current studies have shown that the laboratory produced aKGA-Aerogel absorbent media are more efficient and cost effective than a commercially available fixed bed scrubber media, although much less cost effective than liquid-based citric acid scrubbers (although possibly safer and less labor intensive). A comparison of all three alternative scrubber technologies (liquid aKGA, solid-phase aKGA, and commercially available sorbent materials) is given considering both hypergolic neutralization capabilities and relative costs (as compared to the current citric acid scrubbing technology in use at NASA/KSC).

DeVor, R. W.↗

Synthesis of flower-like silver nanoarchitectures at room temperature

Novel flower-like silver nanoarchitectures were synthesized via a facile and environmentally benign route in the presence of citric acid and ascorbic acid. The flower-like structures are composed of nano-petals of ca. 20 nm in thickness. The products were characterized with X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The growth mechanism of flower-like silver nanoarchitectures involves a film-fold process. Some crucial factors affect the nanocrchitectures growth, such as, pH, the concentration of citric acid, and the concentration of ascorbic acid, have also been discussed.

36 MATERIALS SCIENCE↗

A dual chelating sol–gel synthesis of BaTiO{sub 3} nanoparticles with effective photocatalytic activity for removing humic acid from water

Graphical abstract: The cubic phase BaTiO{sub 3} nanoparticles can be obtained at 600 °C and changed into tetragonal phase at 900 °C by a dual chelating sol–gel method, and the photocatalytic activities of the photocatalysts calcined at different temperatures were investigated by the removal of humic acid (HA) from water under UV light irradiation. Highlights: ► The humic acid in water was firstly degradated by BaTiO{sub 3} photocatalyst. ► The cubic BaTiO{sub 3} was obtained and changed into tetragonal phase at lower temperature. ► The chelating agents had an important influence on the phase formation of BaTiO{sub 3}. ► The tetragonal phase BaTiO{sub 3} calcined at 900 °C exhibited higher photocatalytic activity under UV irradiation. -- Abstract: In this paper, a dual chelating sol–gel method was used to synthesize BaTiO{sub 3} nanoparticles by using acetylacetone and citric acid as chelating agents. The samples calcined at different temperatures were analyzed by thermogravimetric and differential thermal analysis (TG-DTA), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscope (SEM) and UV–vis diffuse reflectance spectra (UV–vis). The results indicated that cubic phase BaTiO{sub 3} nanoparticles about 19.6 nm can be obtained at 600 °C and changed into tetragonal phase at 900 °C about 97.1 nm. All the BaTiO{sub 3} nanoparticles showed effective photocatalytic activities on the removal of humic acid (HA) under UV light irradiation. A comparison of single (acetylacetone or citric acid) and dual chelating (acetylacetone and citric acid) synthetic processes was also studied and the results demonstrated that the dual chelating agents indeed reduced phase transformation temperature from cubic to tetragonal BaTiO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Alternative to Nitric Acid for Passivation of Stainless Steel Alloys

Corrosion is an extensive problem that affects the Department of Defense (DoD) and National Aeronautics and Space Administration (NASA). The deleterious effects of corrosion result in steep costs, asset downtime affecting mission readiness, and safety risks to personnel. Consequently, it is vital to reduce corrosion costs and risks in a sustainable manner. The DoD and NASA have numerous structures and equipment that are fabricated from stainless steel. The standard practice for protection of stainless steel is a process called passivation. Typical passivation procedures call for the use of nitric acid; however, there are a number of environmental, worker safety, and operational issues associated with its use. Citric acid offers a variety of benefits including increased safety for personnel, reduced environmental impact, and reduced operational cost. DoD and NASA agreed to collaborate to validate citric acid as an acceptable passivating agent for stainless steel. This paper details our investigation of prior work developing the citric acid passivation process, development of the test plan, optimization of the process for specific stainless steel alloys, ongoing and planned testing to elucidate the process' resistance to corrosion in comparison to nitric acid, and preliminary results.

Lewis, Pattie L.↗

Silver nanoplates with ground or metastable structures obtained from template-free two-phase aqueous/organic synthesis

Silver has unique electrical, catalytic, and plasmonic characteristics and has been widely sought for fabrication of nanostructures. The properties of silver nanostructures are intimately coupled to the structure of silver crystals. Two crystal structures are known for silver: the stable (ground) state cubic face centered 3C-Ag structure and the metastable hexagonal 4H-Ag structure. Recently, Chackraborty et al. [J. Phys.: Condens. Matter 23, 325401 (2011)] discovered a low density, highly reactive metastable hexagonal 2H-Ag structure accessible during electrodeposition of silver nanowires in porous anodic alumina templates. This 2H-Ag structure has enhanced electrical and catalytic characteristics. In the present work we report template-free synthesis of silver nanoplates with the metastable 2H-Ag crystal structure, which appears together with the ground 3C-Ag and the metastable 4H-Ag structures in a two-phase solution synthesis with citric acid as the capping agent. The capacity of citric acid to stabilize both the stable and the metastable structures is explained by its preferential binding to the close packed facets of Ag crystals, which are the (111) planes for 3C-Ag and the (0001) planes for 4H-Ag and 2H-Ag. Nanoplate morphology and structure are characterized using scanning electron microscopy, X-ray diffraction, and transmission electron microscopy. The synthesized nanoplates have thickness from 15 to 17 nm and edge length from 1 to 10 μm. Transmission electron microscopy selected area electron diffraction is used to uniquely identify and distinguish between nanoplates with 2H-Ag or 4H-Ag or 3C-Ag structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of set retarding admixtures on calcium sulfoaluminate cement hydration and property development

Little published data is available to guide specification calcium sulfoaluminate cement (CSA) mixtures with citric acid retarder dosage rates capable of achieving adequate field working times, nor to understand the effect of retarder dosage on hydration and property development, representing a significant barrier to widespread CSA concrete use. Thus, this study investigated the use of citric acid with two commercially-available CSA cements, tracking the effects of dosage on phase development, hydration, setting, and compressive strengths. Key findings were that: citric acid successfully retarded initial set past 120 min for both cements despite significantly different chemistries; increasing cement anhydrite content reduced retarder effectiveness and altered hardened binder microstructure, reducing compressive strengths; greater retarder dosages did not negatively affect cumulative hydration, nor strengths; and the time at which the maximum rate of heat evolution occurred correlated with final setting, a relationship useful for predicting field mixture behavior based on laboratory testing.

36 MATERIALS SCIENCE↗

Treatment and Reuse of Wastewaters Discharged by Petroleum Industries (HMD/Algeria)

Industrial wastewaters discharged by petroleum industries contains: oil, heavy metals and chemicals used in the process of oil separation and treatment. These waters are a source of soil, water and air pollution, and lead a mortal danger to the ecosystem. Our aim in this work has an aspect that can contribute to the collective effort to address the enormous amount of water purges storage bins and reuse them to avoid any environmental damage. This was achieved by chemical treating of these wastewaters discharged from three different locations of Hassi Messaoud (HMD) petroleum field by flocculation with (C-5563) followed by coagulation with (C-2061) using two different acids as sequestering namely: Ascorbic and Citric acid. After experiments, the results showed that the wastewater can be treated without sequestering by adding 40 ppm of activated silicates. The best result was obtained by addition of 160 ppm of Ascorbic acid as sequestering agent and 20 ppm of activated silicates; resulting in removal of 92.81 % of suspended matter and 95.53 % of turbidity. Finally we concluded that this wastewater was satisfactorily treated and we recommend either inject it for enhanced oil recovery in industrial closest field (North field) to maintain the reservoir pressure and the improved rate recovery of oil reserves or reuse it in garden irrigation. In order to see the impact of the treated water on plants, irrigation tests have conducted on two types of plants (date palm and shaft apocalyptic) for one year. The tests showed that the thick layer of 5 cm and 0.08mm of particles diameter of dune sand removes most of remaining oil. The sand layer that fills the basin surrounding the shaft is removed and replaced every 06 months. So, Dune sand plays the role of natural filter. The garden plants appear and grow normally.

54 ENVIRONMENTAL SCIENCES↗