Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION METHODS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Method for calculating convective heat-transfer coefficients over turbine vane surfaces

A method for calculating laminar, transitional, and turbulent convective heat-transfer coefficients for turbine vane surfaces is described. An approximate integral solution method produced results in good agreement with a finite-difference solution. Comparisons between the two are presented. The integral solution results agreed well with the finite-difference solution results in the laminar and turbulent regions. Differences in calculating the start of transition produced a later starting point for the approximate integral solution's transitional flow regime.

Gauntner, D. J.↗

A finite-volume numerical method to calculate fluid forces and rotordynamic coefficients in seals

A numerical method to calculate rotordynamic coefficients of seals is presented. The flow in a seal is solved by using a finite-volume formulation of the full Navier-Stokes equations with appropriate turbulence models. The seal rotor is perturbed along a diameter such that the position of the rotor is a sinusoidal function of time. The resulting flow domain changes with time, and the time-dependent flow in the seal is solved using a space conserving moving grid formulation. The time-varying fluid pressure reaction forces are then linked with the rotor center displacement, velocity and acceleration to yield the rotordynamic coefficients. Results for an annular seal are presented, and compared with experimental data and other more simplified numerical methods.

Athavale, M. M.↗

Analysis of multi-layered films

Dye densities of multi-layered films are determined by applying a regression analysis to the spectral response of the composite transparency. The amount of dye in each layer is determined by fitting the sum of the individual dye layer densities to the measured dye densities. From this, dye content constants are calculated. Methods of calculating equivalent exposures are discussed. Equivalent exposures are a constant amount of energy over a limited band-width that will give the same dye content constants as the real incident energy. Methods of using these equivalent exposures for analysis of photographic data are presented.

Scarpace, F. L.↗

Environment of Space Interactions with Space Systems

The primary product of this research project was a computer program named SAVANT. This program uses the Displacement Damage Dose (DDD) method of calculating radiation damage to solar cells. This calculation method was developed at the Naval Research Laboratory, and uses fundamental physical properties of the solar cell materials to predict radiation damage to the solar cells. This means that fewer experimental measurements are required to characterize the radiation damage to the cells, which results in a substantial cost savings to qualify solar cells for orbital missions. In addition, the DDD method makes it easier to characterize cells that are already being used, but have not been fully tested using the older technique of characterizing radiation damage. The computer program combines an orbit generator with NASA's AP-8 and AE-8 models of trapped protons and electrons. This allows the user to specify an orbit, and the program will calculate how the spacecraft moves during the mission, and the radiation environment that it encounters. With the spectrum of the particles, the program calculates how they would slow down while traversing the coverglass, and provides a slowed-down spectrum.

Source record↗

A method for calculating laminar viscous, compressible flows with small pressure gradients

A method is presented for calculating laminar viscous, compressible flows in which pressure gradients are assumed to be neglibible in energy conservation and in developing property relations, but not in momentum conservation. The equations are developed from Navier-Stokes equations in a noninertial reference frame. The method is an extension of an approximate method developed for calculating combined forced and contained natural convection in a rotating tank. The restriction to small density and temperature variations in the previous method is removed. For illustration, a two-dimensional simulation of the rotating tank problem is formulated, and the numerical computation procedure to be used is indicated.

Martin, E. D.↗

Comparison of measured and modeled solar EUV flux and its effect on the E-F1 region ionosphere

Two different photochemical schemes are used to investigate the response of the E-F1 region ionosphere to different solar EUV flux models, and the results are compared with incoherent scatter radar electron density measurements taken at Millstone Hill. The latest EUV flux model (Tobiska, 1991), which incorporates more recent measurements, has generally more flux at short wavelengths compared to the Hinteregger et al. (1981) flux model based on AE-E satellite data. This results in better agreement with the measurements in the E-F1 region and above. The Tobiska flux model gives a smaller E region peak density, due to the influence of low Ly-beta flux in the November 10, 1988 rocket measurements of Woods and Rottman (1990). The photoionization and photoabsorption cross sections of Conway (1988) give results in somewhat better agreement with observations than the cross sections of Torr et al. (1979). For the zenith angles considered (daytime conditions), the Chapman function method for calculating photoabsorption yields results in satisfactory agreement with a more rigorous calculation method using a formula from Rees (1989).

Buonsanto, M. J.↗

Tidal Disruptions of Main-sequence Stars. II. Simulation Methodology and Stellar Mass Dependence of the Character of Full Tidal Disruptions

This is the second in a series of papers presenting the results of fully general relativistic simulations of stellar tidal disruptions in which the stars' initial states are realistic main-sequence models. In the first paper, we gave an overview of this program and discussed the principal observational implications of our work. Here we describe our calculational method, which includes a new method for calculating fully relativistic stellar self-gravity, and provide details about the outcomes of full disruptions, focusing on the stellar mass dependence of the outcomes for a black hole of mass 106 M(⊙). We consider eight different stellar masses, from 0.15 M(⊙) to 10 M(⊙). We find that, relative to the traditional order-of-magnitude estimate r t, the physical tidal radius of low-mass stars (M(*) ≲ 0.7 M(⊙)) is larger by tens of percent, while for high-mass stars (M(*) ≲ 1 M(⊙)) it is smaller by a factor of 2–2.5. The traditional estimate of the range of energies found in the debris is ≈1.4× too large for low-mass stars, but is a factor of ~2 too small for high-mass stars; in addition, the energy distribution for high-mass stars has significant wings. For all stars undergoing tidal encounters, we find that mass loss continues for many stellar vibration times because the black hole's tidal gravity competes with the instantaneous stellar gravity at the star's surface until the star has reached a distance from the black hole ~O(10)r(t).

Taeho Ryu↗

A Method for Calculating Viscosity and Thermal Conductivity of a Helium-Xenon Gas Mixture

A method for calculating viscosity and thermal conductivity of a helium-xenon (He-Xe) gas mixture was employed, and results were compared to AiResearch (part of Honeywell) analytical data. The method of choice was that presented by Hirschfelder with Singh's third-order correction factor applied to thermal conductivity. Values for viscosity and thermal conductivity were calculated over a temperature range of 400 to 1200 K for He-Xe gas mixture molecular weights of 20.183, 39.94, and 83.8 kg/kmol. First-order values for both transport properties were in good agreement with AiResearch analytical data. Third-order-corrected thermal conductivity values were all greater than AiResearch data, but were considered to be a better approximation of thermal conductivity because higher-order effects of mass and temperature were taken into consideration. Viscosity, conductivity, and Prandtl number were then compared to experimental data presented by Taylor.

Johnson, Paul K.↗

A comparison of matrix methods for calculating eigenvalues in acoustically lined ducts

Three approximate methods - finite differences, weighted residuals, and finite elements - were used to solve the eigenvalue problem which arises in finding the acoustic modes and propagation constants in an absorptively lined two-dimensional duct without airflow. The matrix equations derived for each of these methods were solved for the eigenvalues corresponding to various values of wall impedance. Two matrix orders, 20 x 20 and 40 x 40, were used. The cases considered included values of wall admittance for which exact eigenvalues were known and for which several nearly equal roots were present. Ten of the lower order eigenvalues obtained from the three approximate methods were compared with solutions calculated from the exact characteristic equation in order to make an assessment of the relative accuracy and reliability of the three methods. The best results were given by the finite element method using a cubic polynomial. Excellent accuracy was consistently obtained, even for nearly equal eigenvalues, by using a 20 x 20 order matrix.

Watson, W.↗

A biharmonic relaxation method for calculating thermal stress in cooled irregular cylinders

A numerical method was developed for calculating thermal stresses in irregular cylinders cooled by one or more internal passages. The use of relaxation methods and elementary methods of finite differences was found to give approximations to the correct values when compared with previously known solutions for concentric circular cylinders possessing symmetrical and asymmetrical temperature distributions.

Holms, Arthur G↗