Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bulk Stabilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Unusual Iron Redox Systematics of Martian Magmas

Martian magmas are known to be FeO-rich and the dominant FeO-bearing mineral at many sites visited by the Mars Exploration rovers (MER) is magnetite. Morris et al. proposed that the magnetite appears to be igneous in origin, rather than of secondary origin. However, magnetite is not typically found in experimental studies of martian magmatic rocks. Magnetite stability in terrestrial magmas is well understood, as are the stabilities of FeO and Fe2O3 in terrestrial magmas. In order to better understand the variation of FeO and Fe2O3, and the stability of magnetite (and other FeO-bearing phases) in martian magmas, we have undertaken an experimental study with two emphases. First, we determine the FeO and Fe2O3 contents of super- and sub-liquidus glasses from a shergottite bulk composition at 1 bar to 4 GPa, and variable fO2. Second, we document the stability of magnetite with temperature and fO2 in a shergottite bulk composition.

Danielson, L.↗
NASA NTRS1977

Effects of high temperature and e-beam irradiation on the stability of refractory thin films

Refractory thin films of Al2O3, ZrO2, MgO, ThO2, and BN have been investigated in situ in an UHV transmission electron microscope. The electron transparent refractory films were prepared by electron-beam evaporation, anodization, RF sputtering, and thinning of bulk crystal materials. The study concentrates on monitoring the thermal and mechanical stability of the films, phase and structural changes, and electron irradiation effects as a function of film-preparation conditions. With increasing temperatures, five different crystallographic phases were observed for both anodized and electron-beam-evaporated alumina films. Zirconia films exhibited two phase transitions upon heating to 1200 C and electron-irradiation-induced crystallization of ZrO2 even at room temperature. MgO, ThO2, and BN films did not undergo any noticeable phase transformation but ruptured due to sintering below 1200 C.

Lee, E. H.↗
DOE OSTI2026

Field-tailoring quantum materials via magneto-synthesis: metastable metallic and magnetically suppressed phases in a trimer iridate

We demonstrate that applying modest magnetic fields (< 0.1 T) during high-temperature crystal growth can profoundly alter the structure and ground state of a spin-orbit-coupled, antiferromagnetic trimer lattice. Using BaIrO₃ as a model system, whose ground state is intricately dictated by the trimer lattice, we show that magneto-synthesis , a field-assisted synthesis approach, stabilizes a structurally compressed, metastable metallic and magnetically suppressed phases inaccessible via conventional methods. These effects include a 0.85% reduction in unit cell, 4-order-of-magnitude decrease in resistivity, a 10-fold enhancement of the Sommerfeld coefficient, and the collapse of long-range magnetic order -- all intrinsic and bulk in origin. First-principles calculations confirm that the field-stabilized structure lies substantially above the ground state in energy, highlighting its metastable character. These large, coherent and correlated changes across multiple bulk properties, unlike those caused by dilute impurities, defects or off-stoichiometry, point to an intrinsic field-induced mechanism. The findings establish magneto-synthesis as a powerful new pathway for accessing non-equilibrium quantum phases in strongly correlated materials.

magneto-synthesis↗
NASA NTRS2000

TRMM/LIS Lightning: Going Beyond Climatological Composites

The high sensitivity, accuracy and pointing stability of the TRMM/LIS allows analysis of not only tropical bulk lightning production, but of storm cell-based statistics. Issues associated with per-storm flash rate identification are presented, including minimum detectable flash rate, 'unbiasing' the low end of observed storm flash rate spectra, and cell identification. Global lightning bulk composites are disaggregated into contributions from storm frequency of occurrence and per-storm flash rate, with the former dominating the global spatial distribution. Local examination of these fields reveals offsets between peaks in flashing storm occurrence and peaks in storm flash rate, often related to geographic effects and diurnal storm evolution. The correlation of storm-level statistics with theoretical measures of meso/large scale coupling (e.g., the gross moist stability of the tropical atmosphere as calculated by Neelin et al) is shown.

Boccippio, Dennis J.↗
DOE OSTI2025

Czochralski Growth and Characterization of a Compositionally Complex Rare Earth Aluminum Garnet Scintillator: (Gd 1/4 Y 1/4 Tb 1/4 Lu 1/4 ) 3 Al 5 O 12 :Ce

Compositionally complex oxides have garnered increasing interest for their enhanced phase stability and tunable functional properties, yet their development as bulk single crystal scintillators remains limited. Herein, we report the Czochralski growth and characterization of (Gd 1/4 Y 1/4 Tb 1/4 Lu 1/4 ) 3 Al 5 O 12 :Ce (GYTLAG), a compositionally complex garnet incorporating four dodecahedrally coordinated principal rare earth elements. The garnet phase was confirmed by powder and single crystal X-ray diffraction, and macroscopic defects are described. X-ray absorption near-edge structure measurements confirm the 3+ oxidation state of all rare earths and support their occupation of the same crystallographic site; white line intensity variations correlate with the anticipated segregation behavior. Elemental segregation is quantified by SEM/EDS and ICP-OES, and a linear trend was established between the segregation coefficient and the difference between each rare earth’s ionic radius (r) and the average ionic radius (AIR) of the dodecahedral site. This trend offers a predictive framework for compositional control in future REAG crystals grown by the Czochralski method. Photoluminescence and radioluminescence measurements reveal both Ce 3+ and Tb 3+ emission. Scintillation pulses exhibit four-component decay with dominant ~230 µs and ~1.2 ms components, and the light yield is estimated to be up to 43,000 ph/MeV under 137Cs γ-ray excitation. GYTLAG also demonstrates a strong radioluminescence efficiency and 50% lower afterglow at 20 ms compared to a LuAG:Ce reference, underscoring its promise for scintillator applications.

Compositionally complex oxide, high entropy oxide,↗
DOE OSTI2026

Electronic Structure of Compressively Strained Bilayer Nickelate Thin Film

The discovery of superconductivity in bulk bilayer nickelates under high pressure, and its subsequent stabilization in compressively strained thin films at ambient pressure, has established a new platform for exploring high-𝑇 c superconductivity beyond the cuprates. Central to this development is the prominent role of the 3⁢𝑑$^2_𝑧$ orbital in shaping the low-energy electronic structure, imposing constraints on microscopic theories and fueling debate over the superconducting mechanism. Here we report a systematic in situ angle-resolved photoemission spectroscopy study of compressively strained bilayer nickelate thin films spanning Ca doping, oxygen stoichiometry and film thickness. Despite variations in oxygen-vacancy disorder and surface termination, the electronic structure remains robust and exhibits a systematic strain-driven evolution consistent with an intermediate-correlation regime. In particular, we demonstrate a Ca-doping-induced electronic structure evolution that is consistent with Fermi-level crossing of the 𝛾 band and is decoupled from the presence of superconductivity, suggesting that, while important for the 𝛾 band to be near the Fermi level, the debated 𝛾 crossing and the resulting Fermi pocket may not be a prerequisite for superconductivity. Together, our results establish key spectroscopic constraints on the minimal fermiology and correlation strength relevant to superconductivity in bilayer nickelates, providing an experimental foundation for microscopic theories of their pairing mechanism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Cosmological quasiparticles and the cosmological collider

The interplay between cosmology and strongly coupled dynamics can yield transient spectral features that vanish at late times, but which may leave behind phenomenological signatures in the spectrum of primordial fluctuations. Of particular interest are strongly coupled extensions of the standard model featuring approximate conformal invariance. In flat space, the spectral density for a scalar operator in a conformal field theory is characterized by a continuum with scaling law governed by the dimension of the operator, and is otherwise featureless. Anti–de Sitter/conformal field theory arguments suggest that for large 𝑁, in an inflationary background with Hubble rate 𝐻, this continuum is gapped. We demonstrate that there can be additional peak structures that become sharp and particlelike at phenomenologically interesting regions in parameter space, and we estimate their contribution to cosmological observables. We find phenomena that are potentially observable in future experiments that are unique to these models, including displaced oscillatory features in the squeezed limit of the bispectrum. These particles can be either fundamental, and localized to a UV brane, or composite at the Hubble scale, 𝐻, and bound to a horizon in the bulk of the 5D geometry. We comment on how stabilization of conformal symmetry breaking vacua can be correlated with these spectral features and their phenomenology.

conformal field theory↗
NASA NTRS1982

Deposit formation in hydrocarbon fuels

The hydrocarbon fuels RP-1, commercial-grade propane, JP-7 and chemically pure propane were subjected to tests in a high pressure fuel coking apparatus in order to evaluate their thermal decomposition limits and carbon deposition rates in heated copper tubes. A fuel thermal stability parametric evaluation was conducted at 136-340 atmospheres, bulk fuel velocities of 6-30 m/sec, and tube wall temperatures of 422-811 K, and the effect of inside wall material on deposit formation was evaluated in tests using nickel-plated tubes. Results show RP-1 deposit formation at wall temperatures between 600 and 800 K, with peak deposit formation near 700 K. Substitution of deoxygenated JP-7 for RP-1 showed no improvement, and the carbon deposition rates for propane fuels were found to be higher than those of either of the kerosene fuels. Nickel plating of the tube walls significantly reduced RP-1 carbon deposition rates.

Roback, R.↗
NASA NTRS1985

Streaming tearing mode

The magnetohydrodynamic stability of streaming tearing mode is investigated numerically. A bulk plasma flow parallel to the antiparallel magnetic field lines and localized in the neutral sheet excites a streaming tearing mode more strongly than the usual tearing mode, particularly for the wavelength of the order of the neutral sheet width (or smaller), which is stable for the usual tearing mode. Interestingly, examination of the eigenfunctions of the velocity perturbation and the magnetic field perturbation indicates that the streaming tearing mode carries more energy in terms of the kinetic energy rather than the magnetic energy. This suggests that the streaming tearing mode instability can be a more feasible mechanism of plasma acceleration than the usual tearing mode instability.

Shigeta, M.↗
NASA NTRS1991

Chemical spray pyrolysis of Tl-Ba-Ca-Cu-O high-T(sub c) superconductors for high-field bitter magnets

The deposition of Tl-Ba-Ca-Cu-O thick films by spray pyrolyzing a Ba-Ca-Cu-O precursor film and diffusing thallium into the film to form the superconducting phase is examined. This approach was taken to reduce exposure to thallium and its health and safety hazards. The Tl-Ba-Ca-Cu-O system was selected because it has very attractive features which make it appealing to device and manufacturing engineering. Tl-Ba-Ca-Cu-O will accommodate a number of superconducting phases. This attribute makes it very forgiving to stoichiometric fluctuations in the bulk and film. It has excellent thermal and chemical stability, and appears to be relatively insensitive to chemical impurities. Oxygen is tightly bound into the systems, consequently there is no orthorhombic (conductor) to tetragonal (insulator) transition which would affect a component's lifetime. More significantly, the thallium based superconductors appear to have harder magnetic properties than the other high-Tc oxide ceramics. Estimates using magnetoresistance measurements indicate that at 77 K Tl2Ba2CaCu2O10 will have an upper critical field, H(sub c2) fo 26 Tesla for applied fields parallel to the c-axis and approximately 1000 Tesla for fields oriented in the a-b plane. Results to date have shown that superconducting films can be reproducibly deposited on 100 oriented MgO substrates. One film had a zero resistance temperature of 111.5 K. Furthermore, x ray diffraction analysis of the films showed preferential c-axis orientation parallel to the plane of the substrate. These results have now made it possible to consider the manufacture of a superconducting tape wire which can be configured into a topology useful for high-field magnet designs. The research which leads to the preparation of these films and plans for further development are reviewed.

Derochemont, L. Pierre↗
DOE OSTI2026

Understanding the Performance Gap between Polycrystalline and Single-Crystal Nickel-Rich Layered Oxide Cathodes

Singe-crystal (SC) nickel-rich layered oxide cathodes, composed of boundary-free particles with high tap density, offer significant advantages in volumetric energy density and mechanical strength compared with polycrystalline (PC) cathode materials. However, as the nickel content increases (≥80%), SC Ni-rich cathodes often suffer from faster performance degradation than PC cathodes of the same composition, and the underlying causes of this discrepancy remain poorly understood. Herein, we reveal the distinct Ni redox behaviors that govern the electrochemical performance of SC and PC Ni-rich cathodes using multiscale and operando characterization techniques. Our results indicate that the increasingly heterogeneous Ni oxidation process in SC cathodes leads to the additional irreversible oxygen redox activity that deteriorates both the mechanical and chemical structures. In contrast, PC cathodes, despite with more pronounced surface reconstruction, exhibit greater chemomechanical stability due to homogeneous redox reactions during charging. Consequently, we find that bulk degradation, more than surface reactions, ultimately leads to fast capacity decay of SC Ni-rich cathodes during cycling. In conclusion, this work offers a comprehensive view on the impact of Ni redox evolutions on the chemomechanical stability in Ni-rich layered oxide cathodes, providing new insights into the longstanding performance gap between SC and PC cathodes, and guiding the rational design of Ni-rich cathode architectures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Large exciton binding energy in a bulk van der Waals magnet from quasi-1D electronic localization

Excitons, bound electron-hole pairs, influence the optical properties in strongly interacting solid-state systems and are typically most stable and pronounced in monolayer materials. Bulk systems with large exciton binding energies, on the other hand, are rare and the mechanisms driving their stability are still relatively unexplored. Here, we report an exceptionally large exciton binding energy in single crystals of the bulk van der Waals antiferromagnet CrSBr. Utilizing state-of-the-art angle-resolved photoemission spectroscopy and self-consistent ab-initio GW calculations, we present direct spectroscopic evidence supporting electronic localization and weak dielectric screening as mechanisms contributing to the amplified exciton binding energy. Furthermore, we report that surface doping enables broad tunability of the band gap offering promise for engineering of the optical and electronic properties. Our results indicate that CrSBr is a promising material for the study of the role of anisotropy in strongly interacting bulk systems and for the development of exciton-based optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Thermally driven surface phase separation in intermetallic alloys

Intermetallic compounds are widely recognized for their high-temperature phase stability and resistance to composition and structural changes. However, we reveal athermally activated bulk-to-surface mass exchange mechanism that drives surface phase separation, resulting in the formation of surface precipitates with distinct composition andstructure from the bulk matrix. Using the archetypal β-NiAl system, we show that asymmetries in vacancy formation energies between Ni and Al atoms induce preferential Ni segregation to the surface, forming Ni-rich γ'-Ni 3 Al precipitates. By integrating in-situ electron microscopy, synchrotron X-ray absorption spectroscopy and first-principles computational modeling, we establish a direct mechanistic connection between bulk thermal defect dynamics, surface compositional evolution, and phase segregation behavior. This bulk-surface coupling mechanism can be a driver of surface phase separation in multicomponent alloys under thermal stress. In conclusion, these results refine the thermodynamic boundaries of intermetallic stability and provide insights into managingthe performance and durability of intermetallic alloys for demanding high-temperature applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Enhancing stability, magnetic anisotropy, and coercivity of manganese aluminum: Machine learning, ab initio , and micromagnetic modeling

The binary manganese aluminum (MnAl) alloy with L⁢1 0 crystal structure is a promising rare earth (RE) element-free permanent magnetic material because of its exceptional magnetic properties. However, experimentally synthesizing it in a stable bulk form is extremely challenging. Here, in this study, an alternative method of stabilizing the material, a pathway for experimental synthesis and validation, is proposed and theoretically verified. This is done by partially substituting Mn and Al sites with Fe and Ni and identifying its enhanced phase stability, saturation magnetization density, magnetic anisotropy, and coercivity from density functional theory (DFT), machine learning (ML) crystal graph convolution neural network (CGCNN), and micro-magnetic modeling. When considering a fixed 50% Ni, the magnetic anisotropy increases with the increasing Fe content but decreases the formation energy. The calculated formation energies, elastic constants, and phonon frequencies demonstrate that the binary and quaternary compositions are stable. Most importantly, in 50% Fe and Ni-substituted-equiatomic phase, magnetic anisotropy constants and saturation magnetization density increase by 56% and 23% as compared to the MnAl. Further, the coercivity of the equiatomic phase predicted with micro-magnetic modeling is higher by 17% than the parent compound.

Bhandari, Churna [Ames National Laboratory, and Io↗
NASA NTRS1990

Simulation studies of plasma waves in the electron foreshock - The generation of downshifted oscillations

The generation of waves with frequencies downshifted from the plasma frequency, as observed in the electron foreshock, is analyzed by particle simulation. Wave excitation differs fundamentally from the familiar excitation of the plasma eigenmodes by a gentle bump-on-tail electron distribution. Beam modes are destabilized by resonant interaction with bulk electrons, provided the beam velocity spread is very small. These modes are stabilized, starting with the higher frequencies, as the beam is broadened and slowed down by the interaction with the wave spectrum. Initially a very cold beam is also capable of exciting frequencies considerably above the plasma frequency, but such oscillations are quickly stabilized. Low-frequency modes persist for a long time, until the bump in the electron distribution is completely 'ironed' out. This diffusion process also is quite different from the familiar case of well-separated beam and bulk electrons. A quantitative analysis of these processes is carried out.

Dum, C. T.↗
DOE OSTI2024

Geochemical-hydromechanical couplings during water-serpentinized harzburgite interactions at 20° C and 30 bars

Interaction of groundwater with the serpentinized harzburgites of the upper mantle plays an important role in the geologic carbon cycle and serpentinization processes. Here, in this study, an intact serpentinized harzburgite with more than 60% lizardite from the Semail ophiolite in Oman was reacted with water at near neutral pH and low PCO 2 to observe its dissolution behavior and reaction path within the CaO-MgO-SiO 2 -CO 2 -H 2 O system at 20 °C and 30 bars. In the experiment, mass (i.e. H 2 O, ions) transfer is by diffusion and the selected temperature and pressure conditions mimic water-rock interactions at the shallow portions of most ultramafic rock hosted aquifers. Equilibrium activity-activity diagrams and thermodynamic data were used to compare the experimentally determined reaction path with the theoretical stability boundaries for minerals involved to investigate the evolution of bulk chemical composition, mineralogy, and water composition. The experiments demonstrated that (i) the water-rock interactions increased the pH of the aqueous phase from 5.9 to 7.5 over a period of 18 weeks; (ii) the dissolution of lizardite, orthopyroxene (enstatite), and clinopyroxene (diopside and augite) increased the concentration of Mg, Ca, and Si in the aqueous phase; (iii) the dissolution was incongruent with respect to Mg and Si, favoring Si release at pH > 6 due to (a) breaking of more reactive cation‑oxygen bonds that is consistent with the stoichiometry of magnesium for proton exchange reaction which favors a surface that is enriched in Mg at basic conditions, and (b) preferential dissolution of clinopyroxene Mg 1.30 Ca 0.52 Fe 0.06 Si 2 O 6 ; (iv) the aqueous phase was undersaturated with respect to carbonate (e.g. calcite, magnesite, and hydromagnesite) and hydrous (e.g. lizardite, chrysotile, brucite, and talc) minerals; (v) the bulk chemical composition and mineralogy of the intact serpentinized harzburgite matrix did not change; (vi) the thermodynamic data can successfully predict water-intact serpentinized harzburgite behavior if the water chemical composition can be constrained; and (vii) no detectable macroscopic form of damage (e.g. microcracks forming as a result of differential stress fields due to changes in volume during chemical reaction) was observed.

Carbonation↗
DOE OSTI2025

High-Pressure Phase Transition of Metastable Wurtzite-Like CuInSe 2 Nanocrystals

Ternary I–III–VI 2 semiconductors, such as CuInSe 2 , exhibit diverse polymorphs with unique structural characteristics and optoelectronic properties. This study investigates the pressure-induced phase transitions of metastable wurtzite-like CuInSe 2 nanocrystals. Using a combination of synchrotron X-ray diffraction, pair distribution function analysis, and density functional theory calculations, we reveal a transition from cation-ordered wurtzite-like (Pmc2 1 ) to cation-disordered NaCl-like (Fm3̅m) structures at 7.7 GPa. The cation-disordered NaCl-like phase persists upon decompression. Bulk modulus calculations highlight size-dependent deviations from bulk material behavior. These findings deepen our understanding of phase stability in colloidal I–III–VI 2 semiconductor nanocrystals, with implications for tailoring functional materials under extreme conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Phase Stability and Electrochemical Performance of La-Site-Doped Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 High-Entropy Garnets

We investigate La-site substitution in the high-entropy garnet Li6La3Zr0.5Nb0.5Ta0.5Hf0.5O12 (LLZNTH) using Ba2+, Sr2+, and Sm3+ to elucidate how dopant governs phase stability, Li-site distribution, and electrochemical behavior. X-ray diffraction shows that Sr2+ is incorporated homogeneously into the garnet lattice, whereas the larger Ba2+ and smaller Sm3+ ions partially exceed the structural tolerance, generating secondary phases. Nevertheless, the Sm-doped composition (x = 0.05) exhibits the highest room-temperature ionic conductivity (2.7 × 10–4 S cm–1). Neutron powder diffraction reveals that Sm substitution drives a redistribution of Li+ from the tetrahedral 24 d sites into the higher-mobility 96 h positions, enhancing the connectivity of the three-dimensional Li-ion migration network. A Sm-doping series (x = 0.01–0.05) further shows that only sufficiently high Sm levels induce this redistribution, whereas lower concentrations retain Li arrangements similar to the undoped garnet. Critical current density measurements demonstrate that La-site dopants also influence interfacial stability against Li metal, underscoring a trade-off between bulk transport enhancement and mechanical robustness. Collectively, these findings reveal that in high-entropy garnets improved ionic conductivity can originate not only from phase-pure structures but also from targeted modification of the Li sublattice, even when accompanied by secondary phases, offering a compositional design principle for garnet electrolytes.

Li, Chang [Mechanical Engineering, School of Scien↗