Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Boosting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Search for heavy scalar resonances decaying to Lorentz-boosted Higgs and Higgs-like bosons in the $\mathrm{b}\overline{\mathrm{b}}4\mathrm{q}$ final state at $\sqrt{s}=13$ TeV

A search is performed for a heavy scalar resonance X decaying to a Higgs boson (H) and a Higgs-like scalar boson (Y) in the two bottom quark (H → $b\bar{b}$) and four quark (Y → VV → 4q) final state, where V denotes a W or Z boson. Masses of the X between 900 and 4000 GeV and the Y between 60 and 2800 GeV are considered. The search is performed in data collected by the CMS experiment at the CERN LHC from proton-proton collisions at 13 TeV center-of-mass energy, with a data set corresponding to a total integrated luminosity of 138 fb −1 . It targets the Lorentz-boosted regime, in which the products of the H → $b\bar{b}$ decay can be reconstructed as a single large-area jet, and those from the Y → VV → 4q decay as either one Y → 4q or two jets V → H → $q\bar{q}$. Jet identification and mass reconstruction exploit machine-learning tools, including a novel attention-based “particle transformer” for Y → 4q identification. No significant excess is observed in the data above the standard model background expectation. Upper limits on the product of production cross section and branching fraction as low as 0.2 fb are derived at 95% confidence level for various mass hypotheses. This is the first search at the LHC for scalar resonances in the all-hadronic H → $b\bar{b}$VV decay channel.

Beyond Standard Model↗
DOE OSTI2020

Inclusive search for highly boosted Higgs bosons decaying to bottom quark-antiquark pairs in proton-proton collisions at $\sqrt{s} =$ 13 TeV

A search for standard model Higgs bosons (H) produced with transverse momentum (p$_{T}$) greater than 450 GeV and decaying to bottom quark-antiquark pairs ($ \mathrm{b}\overline{\mathrm{b}} $) is performed using proton-proton collision data collected by the CMS experiment at the LHC at $ \sqrt{s} $ = 13 TeV. The data sample corresponds to an integrated luminosity of 137 fb$^{−1}$. The search is inclusive in the Higgs boson production mode. Highly Lorentz-boosted Higgs bosons decaying to $ \mathrm{b}\overline{\mathrm{b}} $ are reconstructed as single large-radius jets, and are identified using jet substructure and a dedicated b tagging technique based on a deep neural network. The method is validated with Z →$ \mathrm{b}\overline{\mathrm{b}} $ decays. For a Higgs boson mass of 125 GeV, an excess of events above the background assuming no Higgs boson production is observed with a local significance of 2.5 standard deviations (σ), while the expectation is 0.7. The corresponding signal strength and local significance with respect to the standard model expectation are μ$_{H}$ = 3.7 ± 1.2(stat)$ {}_{-0.7}^{+0.8} $(syst)$ {}_{-0.5}^{+0.8} $(theo) and 1.9 σ. Additionally, an unfolded differential cross section as a function of Higgs boson p$_{T}$ for the gluon fusion production mode is presented, assuming the other production modes occur at the expected rates.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Measurement of boosted Higgs bosons produced via vector boson fusion or gluon fusion in the H →$ \textrm{b}\overline{\textrm{b}} $ decay mode using LHC proton-proton collision data at $ \sqrt{s} $ = 13 TeV

A measurement is performed of Higgs bosons produced with high transverse momentum (p$_{T}$) via vector boson or gluon fusion in proton-proton collisions. The result is based on a data set with a center-of-mass energy of 13 TeV collected in 2016–2018 with the CMS detector at the LHC and corresponds to an integrated luminosity of 138 fb$^{−1}$. The decay of a high-p$_{T}$ Higgs boson to a boosted bottom quark-antiquark pair is selected using large-radius jets and employing jet substructure and heavy-flavor taggers based on machine learning techniques. Independent regions targeting the vector boson and gluon fusion mechanisms are defined based on the topology of two quark-initiated jets with large pseudorapidity separation. The signal strengths for both processes are extracted simultaneously by performing a maximum likelihood fit to data in the large-radius jet mass distribution. The observed signal strengths relative to the standard model expectation are $ {4.9}_{-1.6}^{+1.9} $ and $ {1.6}_{-1.5}^{+1.7} $ for the vector boson and gluon fusion mechanisms, respectively. A differential cross section measurement is also reported in the simplified template cross section framework.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Offshore application of landslide susceptibility mapping using gradient-boosted decision trees: a Gulf of Mexico case study

Abstract Among natural hazards occurring offshore, submarine landslides pose a significant risk to offshore infrastructure installations attached to the seafloor. With the offshore being important for current and future energy production, there is a need to anticipate where future landslide events are likely to occur to support planning and development projects. Using the northern Gulf of Mexico (GoM) as a case study, this paper performs Landslide Susceptibility Mapping (LSM) using a gradient-boosted decision tree (GBDT) model to characterize the spatial patterns of submarine landslide probability over the United States Exclusive Economic Zone (EEZ) where water depths are greater than 120 m. With known spatial extents of historic submarine landslides and a Geographic Information System (GIS) database of known topographical, geomorphological, geological, and geochemical factors, the resulting model was capable of accurately forecasting potential locations of sediment instability. Results of a permutation modelling approach indicated that LSM accuracy is sensitive to the number of unique training locations with model accuracy becoming more stable as the number of training regions was increased. The influence that each input feature had on predicting landslide susceptibility was evaluated using the SHapely Additive exPlanations (SHAP) feature attribution method. Areas of high and very high susceptibility were associated with steep terrain including salt basins and escarpments. This case study serves as an initial assessment of the machine learning (ML) capabilities for producing accurate submarine landslide susceptibility maps given the current state of available natural hazard-related datasets and conveys both successes and limitations.

Dyer, Alec S. (ORCID:0000000219813904)↗
DOE OSTI2024

Single-atom materials boosting wearable orthogonal uric acid detection

Abstract Uric acid (UA) is a vital biomarker for the diagnosis and management of various health conditions, including cardiovascular diseases, gout, kidney disorders, metabolic syndrome, and wound healing. Despite significant advances in wearable sensor technology, challenges persist in developing wearable sensors that are capable of maintaining high sensitivity, selectivity, and stability. In this study, we present an epidermal sensing platform enhanced with single-atom materials (SAMs) designed for flexible and orthogonal electrochemical detection of UA. We designed and synthesized an SAM with Fe-N 5 active sites to boost the electrochemical sensing signals, integrating it with laser-engraved graphene (LEG) to fabricate a wearable SAM-based UA patch sensor. This design provides superior UA detection performance compared to sensors based on conventional nanomaterials. In addition, we enhanced the detection accuracy and range by using an orthogonal approach that combines direct oxidation through differential pulse voltammetry (DPV) along with parallel biocatalytic amperometric detection. The resulting SAM-based UA orthogonal sensor patch demonstrated exceptional performance in wearable applications through tests measuring sweat UA levels in subjects before and after consuming a purine-rich diet. Graphical Abstract

Ding, Shichao↗
DOE OSTI2022

Transition-metal doped titanate nanowire photocatalysts boosted by selective ion-exchange induced defect engineering

Defect engineering through elemental doping is an efficient way to boost the performance of semiconductor photocatalysts. For this work, transition-metal (TM) doped titanate nanowires (TNWs) were prepared via ion-exchange over the titanate precursors and demonstrated for the Rhodamine B (RhB) degradation under ultraviolet (UV) light irradiation. The ion-exchange of selective ions (V 5+ , Cr 3+ , Ni 2+ , and Zn 2+ ) with protons from pristine TNWs resulted in the hierarchical meso-porosity of nanowires with large pores of ~5–20 nm by TM doping and small pores of ~3.6–4.5 nm inherited from pristine TNWs, which facilitates the mass transfer while maintaining high surface area and active sites. Meanwhile, the TM intercalation partially reduces the Ti 4+ to Ti 3+ and narrows the optical bandgap, which, together with oxygen vacancies and superoxide radicals from pristine TNWs, enhance the adsorption and photocatalytic degradation performance of RhB. This work helps to elucidate the effects of transition-metal doping and provides a rational strategy towards high performance titanate-based photocatalysts for efficient and sustainable wastewater treatment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A novel mineral-acid free biphasic deep eutectic solvent/γ-valerolactone system for furfural production and boosting the enzymatic hydrolysis of lignocellulosic biomass

The failure of hemicellulose valorization in a deep eutectic solvent (DES) pretreatment has become a bottleneck that challenges its further development. Here, to address this issue, this study developed a DES/GVL (γ-valerolactone) biphasic system for effective hemicellulose-furfural conversion, enhanced cellulose saccharification and lignin isolation. The results indicated that the biphasic system could significantly improve the lignin removal (as high as 89.1%), 86.0% higher than the monophasic DES, accompanied by ~100% hemicellulose degradation. Notably, the GVL in the biphasic solvent restricted the condensation of hemicellulose degradation products, which as a result generated large amount of furfural in the pretreatment liquid with a yield of 68.6%. With the removal of hemicellulose and lignin, cellulose enzymatic hydrolysis yield was boosted and reached near 100%. This study highlighted that the novel DES/GVL is capable of fractionating the biomass and benefiting their individual utilization, which could provide a new biorefinery configuration for a DES pretreatment.

09 BIOMASS FUELS↗
DOE OSTI2020

Boosting energy efficiency of Li-rich layered oxide cathodes by tuning oxygen redox kinetics and reversibility

In developing electrode materials for next-generation Li-ion batteries, significant efforts have been given to the energy, power density and cycling stability, with much less (if any) attention paid to the energy efficiency – arguably, the most important practical measure for large-scale applications. This is particularly true for the oxygen-redox active electrodes, such as Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 , the notorious energy-inefficient cathode that has an extremely high capacity but comes with large voltage hysteresis and voltage decay. Herein, we report the rational design of an energy-efficient Li-rich layered cathode along with high energy, power density and cycling stability enabled by tuning oxygen redox activity. Specifically, the target material Li 1.12 Ni 0.22 Co 0.13 Mn 0.52 O 2 exhibits an ultrahigh energy efficiency at 1 C (90.6%), high capacity (> 200 mAh g -1 ) with 98.9% retention and less than 150 mV decay at the extended 200 cycles. Overall, through direct comparison between the material and Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 , we show that the compositional change, although slightly, greatly improves the oxygen redox kinetics and reversibility, thereby boosts energy efficiency. The findings offer a strategy to narrow the gap between scientific interest and practical application of oxygen-redox chemistry.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Boosting the performances of protonic solid oxide fuel cells for co-production of propylene and electricity from propane by integrating thermo- and electro- catalysis

Protonic solid oxide fuel cells (p-SOFC) integrated with clean thermal energy sources are promising platforms for decarbonized chemical production in addition to power generation, such as on-purpose propylene production from propane dehydrogenation (PDH). The catalytic performance of the conventional nickel-cermet-based anode materials in p-SOFC for propane conversion is restrained by their low active surface area and proneness to coking. In this work, by integration of a highly efficient industry-relevant thermal catalyst PtGa/ZSM-5 for PDH reaction, we demonstrate that both the electrochemical and catalytic performance of the propane-fueled p-SOFC can be effectively enhanced. The PtGa catalyst integrated p-SOFC exhibits a peak power density of 93 mW cm -2 at 600°C, which is greater by about 100% and 50% than that without catalyst or with a perovskite-based (Pr 0.3 Sr 0.7 ) 0.9 Ni 0.1 Ti 0.9 O 3 (PSNT) catalyst layer, respectively. The PDH activity and olefin selectivity of the PtGa catalyst is also significantly higher than that of the PSNT catalyst. In addition, much improved coke tolerance and propylene selectivity (over 90%) compared to the catalyst-free Ni-cermet anode materials were achieved by integrating the industrial catalyst layer. The propane conversion can be further improved by an applied current density, whereas the olefin selectivity is almost unaltered. The excellent performance of the PtGa catalyst integrated p-SOFC is attributed to the high surface area, intrinsically high catalytic activity, selectivity, and anti-coking properties of the catalytic layer for propane conversion. In conclusion, this work provides a general approach and a case study for boosting the performances of p-SOFCs in chemical production by integrating thermo- and electro- catalysis.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Long carbon fibers boost performance of dry processed Li-ion battery electrodes

Dry processing (DP) is an advanced manufacturing technique for lithium-ion battery (LIB) electrodes. Unlike conventional wet-process-based manufacturing that involves dissolving polyvinylidene fluoride (PVDF) binder in n-methyl-2-pyrrolidone (NMP) solvent for slurry-casting, DP involves fibrillation of polymer binders. This method offers environmental and cost benefits by eliminating the need for expensive and environmentally hazardous organic solvents. However, DP-produced electrode films often lack mechanical stability due to the absence of a current collector substrate during electrode material layer fabrication. This reduced mechanical instability results in difficulty during fabricating of thin electrodes (≈5 mAh/cm 2 ). To address this issue, long (>8 mm) carbon fiber (CF) has been incorporated to reinforce the mechanical strength of the electrode films. In conclusion, the study demonstrates that the inclusion of long carbon fiber boosts the mechanical, electrical, thermal, and electrochemical performance of DP electrodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Polyimide as a durable cathode for all-solid-state Li(Na)–organic batteries with boosted cell-level energy density

The integration of organic electrode materials (OEMs) with solid-state electrolytes (SSEs) is expected to build an all-solid-state battery (ASSB) with long-term sustainability, high safety, and high energy density. Despite this great promise, the cell-level energy density is still far from practically applicable, which stems from the ultrathick SSE layer and thin cathode layer used in a pellet-type ASSB design. Here, a cost-effective polyimide (PI) material was first exploited as an organic cathode for sulfide-based ASSBs. A capacity of ~190 mAh g -1 was delivered with almost no capacity decay over 300 cycles. Moreover, for the first time, a dry-film approach was introduced to manufacture a sheet-type Li–organic ASSB with an ultrathin SSE layer and a high-areal-loading PI cathode. Notably, PI is a perfect candidate for dry-film technology due to its high thermal stability and extraordinary chemical inertness toward sulfide SSEs. Remarkably, the free-standing SSE membrane was merely 46 μm thick, and an ultralow areal resistance of 3.3 Ω cm 2 was achieved, more than tenfold lower than that of reported SSE pellets. One order of magnitude boost in the cell-level energy density was achieved. This work presents a significant leap in transferring organic ASSB technology from laboratory research to factory manufacturing.

25 ENERGY STORAGE↗
DOE OSTI2022

Search for Wγ resonances in proton-proton collisions at √s=13 TeV using hadronic decays of Lorentz-boosted W bosons

A search for W$\gamma$ resonances in the mass range between 0.7 and 6.0 TeV is presented. The W boson is reconstructed via its hadronic decays, with the final-state products forming a single large-radius jet, owing to a high Lorentz boost of the W boson. The search is based on proton-proton collision data at $\sqrt{s} = $ 13 TeV, corresponding to an integrated luminosity of 137 fb$^{-1}$, collected with the CMS detector at the LHC in 2016-2018. The W$\gamma$ mass spectrum is parameterized with a smoothly falling background function and examined for the presence of resonance-like signals. No significant excess above the predicted background is observed. Model-specific upper limits at 95% confidence level on the product of the cross section and branching fraction to the W$\gamma$ channel are set. Limits for narrow resonances and for resonances with an intrinsic width equal to 5% of their mass, for spin-0 and spin-1 hypotheses, range between 0.17 fb at 6.0 TeV and 55 fb at 0.7 TeV. These are the most restrictive limits to date on the existence of such resonances. In specific narrow-resonance benchmark models, heavy scalar (vector) triplet resonances with masses between 0.75 (1.15) and 1.40 (1.36) TeV are excluded for a range of model parameters. Model-independent limits on the product of the cross section, signal acceptance, and branching fraction to the W$\gamma$ channel are set for minimum W$\gamma$ mass thresholds between 1.5 and 8.0 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Search for pair production of boosted Higgs bosons via vector-boson fusion in the $b$$\overline{b}$$b$$\overline{b}$ final state using $pp$ collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A search for Higgs boson pair production via vector-boson fusion is performed in the Lorentz-boosted regime, where a Higgs boson candidate is reconstructed as a single large-radius jet, using 140 fb−1 of proton–proton collision data at $\sqrt{s}$ = 13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Only Higgs boson decays into bottom quark pairs are considered. The search is particularly sensitive to the quartic coupling between two vector bosons and two Higgs bosons relative to its Standard Model prediction, K 2V . This study constrains K 2V to 0.55 < K 2V < 1.49 at the 95% confidence level. The value K 2V = 0 is excluded with a significance of 3.8 standard deviations with other Higgs boson couplings fixed to their Standard Model values. A search for new heavy spin-0 resonances that would mediate Higgs boson pair production via vector-boson fusion is carried out in the mass range of 1–5 TeV for the first time under several model and decay-width assumptions. No significant deviation from the Standard Model hypothesis is observed and exclusion limits at the 95% confidence level are derived.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Search for Higgs boson exotic decays into Lorentz-boosted light bosons in the four-τ final state at $\sqrt{s}$ = 13 with the ATLAS detector

A search for exotic decays of the Higgs boson into a pair of low-mass scalars that subsequently decay into τ-leptons, H → aa → τ + τ – τ + τ – , is presented. In models with Yukawa-like couplings, the decay to τ-leptons is favoured for light a-bosons, with mass in the range of 2m τ < m a < 2m b . Results are presented in the range of 4 GeV < m a < 15 GeV using the 140 fb –1 of proton–proton collisions at $\sqrt{s}$ = 13 TeV recorded with the ATLAS detector during Run 2 of the Large Hadron Collider. This search focuses on the scenario where, for both di-τ pairs, one of the τ-leptons decays to hadrons and neutrinos, while the other decays to a muon and neutrinos. In this mass range, the a → τ + τ – is Lorentz-boosted and a dedicated muon removal technique is used to reconstruct the di-τ pairs.

BSM Higgs↗
DOE OSTI2026

Search for a boosted Higgs boson decaying to bottom quark pairs in association with a W or Z boson in proton-proton collisions at $\sqrt{s}$ = 13TeV

A search is conducted for standard model Higgs bosons with large transverse momentum ($p_\mathrm{T}$) decaying to bottom quark pairs and produced in association with a hadronically decaying W or Z boson at the LHC. The result is based on a dataset of proton-proton collisions at a center-of-mass energy of 13 TeV collected with the CMS detector in 2016$-$2018, corresponding to an integrated luminosity of 138 fb$^{-1}$. Boosted Higgs, W, and Z boson decays are reconstructed using large-radius jets with $p_\mathrm{T}$$\gt$ 450 GeV and identified with heavy-flavor classifiers based on a graph convolutional neural network. The observed signal strength relative to the standard model expectation is $μ$ = 0.72 $^{+0.75}_{-0.71}$ including statistical and systematic uncertainties.

CMS↗
DOE OSTI2025

Fluorinated polythiophenes with ester side chains for boosting the V OC and efficiency in non-fullerene polymer solar cells

As the power conversion efficiency (PCE) of organic photovoltaics (OPVs) approximates the 19 % threshold, wide bandgap (WBG) polythiophenes (PTs) have gained increasing attention due to their simple chemical structures and ease of synthesis, making them promising candidates for large-scale production. However, the benchmark polymer poly(3-hexylthiophene) (P3HT) is limited by its high-lying HOMO energy level, which restricts the open-circuit voltage (V OC ) in solar cells. Here, in this study, we introduce a novel series of PT derivatives (PDC8-T, PDC8-3T, PDC16-3T, and PDC16-3T-2F) featuring ester side chains designed to fine-tune electronic properties through a streamlined three-step synthesis. Additionally, we incorporated a π-spacer to reduce steric hindrance and elongated alkyl side chains to improve solubility and processability. Compared to P3HT, these PT derivatives demonstrate a significant reduction in HOMO energy levels, lowering by approximately 0.3–0.4 eV. Among them, PDC16-3T-2F—with fluorine atom substitution—achieves the lowest HOMO energy level, induces a coplanar molecular conformation, and enhances polymer aggregation behavior. We evaluated these PT derivatives in inverted non-fullerene bulk-heterojunction (NFA BHJ) OPVs. The PDC8-3T device showed a relatively low PCE of 0.69 %, with a V OC of 0.76 V, a short-circuit current density (J SC ) of 3.32 mA/cm 2 , and a fill factor (FF) of 27.3 %. In contrast, the PDC16-3T-2F device achieved an impressive PCE of 7.21 %, with a V OC of 0.85 V, a J SC of 14.60 mA/cm 2 , and an FF of 58.4 %. This remarkable improvement is attributed to the fluorine substitution, which not only enhances molecular orientation but also downshifts the HOMO energy level and further boosts the V OC . Hence, these molecular design strategies have led to a fibrillar bicontinuous interpenetrating network with optimal nanoscale phase separation within the active layer.

14 SOLAR ENERGY↗
DOE OSTI2025

Boosting Tin Perovskite Solar Cell Performance via Light-Induced Interface Doping

Continuous breakthroughs have been achieved in the photoelectric conversion efficiency (PCE) of tin-based perovskite solar cells (TPSCs) in recent years. Inspired by performance improvements observed during device storage, we identified beneficial light-induced interface doping (LIID) in the TPSCs. In situ analyses using X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy reveal that ion migration and oxidation at the interface induce beneficial doping effects, enhancing carrier transport and significantly boosting device performance. By implementing specific illumination techniques or maximum power point tracking (MPPT) methods to achieve LIID, we increased the open-circuit voltage while maintaining a high short-circuit current, reaching a PCE of up to 14.91%. Furthermore, this efficiency was sustained at 70% of its maximum value after nearly 900 h of continuous operation. Our study introduces a novel approach to addressing energy band mismatch, paving the way for improved efficiency in tin-based perovskite solar cells.

Sun, Mulin↗