Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Base Line”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Determination of aerosol content in the atmosphere from ERTS-1 data

The author has identified the following significant results. Significant results, relating the radiance over water surfaces to the atmospheric aerosol content, have been obtained. The results indicate that the MSS channels 4, 5, and 6 centered at 0.55, 0.65, and 0.75 microns have comparable sensitivity, and that the aerosol content can be determined within + or - 10% with the assumed measurement errors of the MSS. The fourth channel, MSS 7, is not useful for aerosol determination due to the water radiance values from this channel generally being less than the instrument noise. The accuracy of the aerosol content measurement could be increased by using an instrument specifically designed for this purpose. This radiance-aerosol content relationship can possibly provide a basis for monitoring the atmospheric aerosol content on a global basis, allowing a base-line value of aerosols to be established. The contrast-aerosol content investigation shows useful linear relationships in MSS channels 4 and 5, allowing the aerosol content to be determined within + or - 10%. MSS 7 is not useful due to the low accuracy in the water radiance, and MSS 6 is found to be too insensitive. These results rely on several assumptions due to the lack of ground truth data, but do serve to indicate which channels are most useful.

Griggs, M.↗

Geometric adjustment of the South American satellite densification (PC-1000) network

Reduced normal equations were computed from observation data and combined with reduced normal equations of other satellite networks to provide station coordinates from a single least square adjustment. Terrestrial data, which include base-lines, heights, and survey coordinates, provide the necessary relative position constraints between collocated stations of two satellite networks. Survey information regarding the observation stations is summarized, and constraints used in the solution are given. Geoidal undulations are computed by using the formula and constants shown.

Mueller, I. I.↗

The use of correlation receiving systems for detection of noise sources at short distances

The use of a directional receiving system to detect noise sources masked by isotropic noise field interference at distances comparable with the distance between the two receivers, was discussed. Wide band noise was also examined. Results indicate the following limitations must be considered when using the method: (1) the system is directional only in the plane of the base, (2) directional power of the system is impaired with a decrease in the bandwidth of the noise source spectrum, (3) the system does not permit unambiguous determination of the direction to noise sources, located on both sides of the base line, and (4) the system has a comparatively low output signal-to-noise ratio.

Tarabarin, V. V.↗

Effect of 14 days of bed rest on urine metabolite excretion and plasma enzyme levels

After 1 week of ambulatory base-line measurement, a group of 8 men 19-26 years of age remained continuously recumbent for 14 days. Studies were continued for 1 week following the prolonged recumbency. Urine excretion rates for a number of constituents were determined 2 days before bed rest, on day 14 of bed rest, and day 6 after bed rest. Blood plasma samples were also obtained at these times, and analyzed for several enzymes. On day 14 of bed rest significant increases were observed in urine excretion of total osmotically-active substances, magnesium, calcium, phosphate, creatinine, hydroxyproline, and 17-OH corticosteroids. A decrease occurred in urinary glucose excretion. Plasma levels of alkaline phosphatase and LDH-3 were depressed, while plasma GPT was elevated. Many of these changes persisted on day 6 after bed rest, and are interpreted as concomitants of the disuse atrophy of the musculoskeletal system that characterizes prolonged bed rest and weightlessness.

Pace, N.↗

Very Long Baseline Interferometry (VLBI) earth physics

The characteristics of the Michelson/Pease stellar interferometer are discussed. An analog of the interferometer using radio waves is described. The use of a conventional hard-wired interferometer with very long base line interferometry (VLBI) is analyzed. Mathematical models are developed to analyze the VLBI techniques. A summary of VLBI geodetic experiments is tabulated. The concept and application of the astronomical radio interferometric earth surveys (ARIES) are reported. A schematic diagram of ARIES implementation is provided.

Macdoran, P. F.↗

Design, processing, and testing of LSI arrays for space station

At wafer probe, units of the TA6567 circuit, a beam leaded COS/MOS/SOS 256-bit RAM, were demonstrated to be functionally perfect. An aluminum gate current-sense version and a silicon-gate voltage-sense version of this memory were developed. Initial base line data for the beam lead SOS process using the TA5388 circuit show the stability of the dc device characteristics through the beam lead processing.

Schneider, W. C.↗

Centaur Standard Shroud (CSS) Heated Altitude Jettison Tests

Altitude jettison tests, at a pressure of 20 torr (0.39 psia), were performed on the Centaur Standard Shroud (CSS) in a 100-foot diameter vacuum chamber. These jettison tests were part of a series of flight qualification tests which were performed on the new CSS system in preparation for the Helios and Viking missions. The first two tests subjected the CSS to a thermal cycle which simulated aerodynamic heating during ascent flight and the third test was performed at altitude pressure and in ambient temperature conditions. The purpose of the ambient temperature test was to provide base line data by which the separate machanical and thermal factors that influence jettison performance could be evaluated individually. The CSS was successfully jettisoned in each of the three tests. Also, thermal, stress, and structural deflection data were obtained which verified the analytical predictions of CSS response to flight environmental conditions and performance during jettison. In addition, much important information was obtained on critical CSS-to-payload clearance losses due to shell motions prior to and during jettison. The effectiveness of the separation system was successfully demonstrated at maximum flight temperatures.

Source record↗

Fabrication and testing of sealed silver-zinc cells

A number of Type HS40-7 sealed silver-zinc cells and experimental 40AH sealed silver-zinc cells were fabricated. Cells of each experimental group contained one variation from the standard configuration (HS40-7) cell. Cells from each of five experimental cell groups and cells of the standard configuration were tested to characterize voltage and capacity performance at various discharge rates. The test cells were then subjected to 100 percent DOD Cycle Life Testing at 22 C. Results indicate that material and/or process variations are available which will improve both performance and cycle life of the existing 40 ampere-hour sealed silver-zinc cell configurations. The average cycle life to 50 percent loss of nominal capacity in cells from two (2) of the experimental groups was 150 - 165 cycles. A series of 12 ampere-hour cells was fabricated and tested as part of a program to incorporate the 40AH sealed silver-zinc cell fabrication technology into a cell of smaller size. Base-line configuration cells and experimental variations were produced using the HS40-7 cell fabrication and processing methods adapted to the smaller cell size.

Donnel, C. P., III↗

An evaluation of reaction wheel emitted vibrations for space telescope

Emitted forces and moments characteristics of the Space Telescope Reaction Wheel Assembly (ST RWA) were measured under room temperature and pressure, thermal extremes, and vibratory conditions. The RWA/Emitted Vibration Measurement Fixture was calibrated statically and dynamically, and background noise was measured with ST RWA not operating. A base line set of forces and moments of the ST RWA along and about three mutually perpendicular axes were recorded at room ambient. The temperature vibration sensitivites shown are those which were concluded to be a function of rotor unbalance changes and not associated with either spin motor nor rotor electronic changes.

Source record↗

A numerical analysis for a comparative study of the pointing accuracy of flexible satellites

The analytical models for flexible satellites have been reported earlier. Numerical results comparing the pointing accuracy of three-axes stabilized, spinning, and dual-spin satellites are presented here. The responses are compared for deterministic and random models with and without external torques. The performances of a uniform control system have been compared to a time-optimal control system for the same base-line configurations.

Huang, T. C.↗

Cardiovascular studies using the chimpanzee (Pan troglodytes)

Despite the phylogenetic similarities between chimpanzees and man, there exists a paucity of reliable data on normal cardiovascular function and the physiological responses of the system to standard interventions. Totally implanted biotelemetry systems or hardwire analog techniques were used to examine the maximum number of cardiovascular variables which could be simultaneously monitored without significantly altering the system's performance. This was performed in order to acquire base-line data not previously obtained in this species, to determine cardiovascular response to specific forcing functions such as ventricular pacing, drug infusions, and lower body negative pressure. A cardiovascular function profile protocol was developed in order to adjust independently the three major factors which modify ventricular performance, namely, left ventricular performance, left ventricular preload, afterload, and contractility. Cardiac pacing at three levels above the ambient rate was used to adjust end diastolic volume (preload). Three concentrations of angiotensin were infused continuously to evaluate afterload in a stepwide fashion. A continuous infusion of dobutamine was administered to raise the manifest contractile state of the heart.

Hinds, J. E.↗

Flight-test evaluation of two electronic display formats for approach to landing under instrument conditions

The results of a flight evaluation of two electronic display formats for the approach to landing under instrument conditions are presented. The evaluation was conducted for a base-line electronic display format and for the same format with runway symbology and track information added. The evaluation was conducted during 3 deg, manual straight-in approaches with and without initial localizer offsets. Flight path tracking performance data and pilot subjective comments were examined with regard to the pilot's ability to capture and maintain localizer and glide slope by using both display formats.

Morello, S. A.↗

Longitudinal aerodynamic characteristics at Mach 0.60 to 2.86 of a fighter configuration with strut braced wing

An investigation was made to determine the effects on longitudinal aerodynamic characteristics of utilizing struts to brace the wing to allow the wing thickness reduction on the LFAX-8 fighter configuration. Structural and load analysis indicated that the maximum airfoil thickness could be reduced from 4.5 to 3.1 percent with the strut brace concept. Wave drag theory indicated that reducing the wing maximum thickness from 4.5 percent to 3.1 percent would yield a significant reduction in zero-lift wave drag of about 28 percent at the design Mach number of 1.60. Strut arrangements designed and tested included, a single straight strut, a single swept strut, and a set of tandem straight struts. In addition, a wire of approximately the same cross sectional area replaced the single straight strut on one series of runs. The original LFAX-8 with the 4.5-percent-thick wing was retested to serve as a base line for this investigation.

Dollyhigh, S. M.↗

Investigations using data from LANDSAT 2

The author has identified the following significant results. Ground truth data collected in coastal areas confirm the sedimentation base line at five fathom depth and less. Forestry ground truth at Supati in Sunderbasn was found to conform with stratifications in aerial photos and in some satellite imagery.

Hossain, A.↗

Static performance of five twin-engine nonaxisymmetric nozzles with vectoring and reversing capability

Transonic tunnel test was performed to determine the static performance of five twin-engine nonaxisymmetric nozzles and a base-line axisymmetric nozzle at three nozzle power settings. Static thrust-vectoring and thrust-reversing performance were also determined. Nonaxisymmetric-nozzle concepts included two-dimensional convergent-divergent nozzles, wedge nozzles, and a nozzle with a single external-expansion ramp. All nonaxisymmetric nozzles had essentially the same statis performance as the axisymmetric nozzle. Effective thrust vectoring and reversing was also achieved.

Capone, F. J.↗

Earth-satellite path attenuation statistics influenced by orientation of rain cells

It is examined whether there may be preferred azimuths for earth-satellite paths along which fading and space diversity statistics are influenced differently than along other azimuths. Such preferred directions may exist if individual rain cells are statistically elongated along them for the given climatological region. The analysis is performed using the rain reflectivity data base obtained at Wallops Island during June, July and August 1973 using a high resolution radar. It is found that in the vicinity of Wallops Island increased attenuation and poorer diversity gains exist along paths whose azimuths and base lines lie in the NE-SW quadrants as compared to the NW-SE sectors. This result suggests the dominance of the major axis of rain cells in these quadrants.

Goldhirsh, J.↗

Stereoscopic direction finding analysis of a type III solar radio burst - Evidence for emission at 2f/p-/

Stereoscopic direction finding measurements from the Imp 8, Hawkeye 1, and Helios 2 spacecraft over base line distances of a substantial fraction of an astronomical unit are used to directly determine the three-dimensional trajectory of a type III solar radio burst. By comparing the observed source positions with the direct in situ solar wind plasma density measurements obtained by Helios 1 and 2 near the sun, the relationship of the emission frequency to the local plasma frequency can be determined directly without any modeling assumptions. These comparisons show that the type III radio emission occurs near the second harmonic of the local electron plasma frequency. Other characteristics of the type III radio emission, such as the source size, which can be obtained from this type of analysis, are also discussed.

Gurnett, D. A.↗

The 25 kW power module updated baseline system

Analyses and trades were performed to improve the original base line system. This report describes a suggested new baseline that incorporated modifications to the September 1977 system.

Source record↗