Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BaCa”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Feasibility Study for Renewable Energy Technologies in Alaska Offshore Waters

This study assesses the feasibility of ocean-based renewable energy sources for decarbonizing the energy supply, increasing coastal resilience, and building energy security and independence in Alaska with a focus on the Outer Continental Shelf (OCS) areas south of the Bering Strait and approximately east of the 169th meridian. Alaska's OCS holds vast renewable energy resource potential including, but not limited to, offshore wind, tidal and wave energy. However, most of this energy resource is "stranded" far from load centers (populations or industrial facilities) that could use the power. Therefore, developing these resources would also require monetizing the resource in some way. In this study we investigate hydrogen production as one monetizing opportunity, and we briefly discuss other possible markets for electricity.

08 HYDROGEN↗
DOE OSTI2024

EMP Testing of NAE Magnetic Motor Starters

Sandia National Laboratories (SNL) performed a high-altitude nuclear electromagnetic pulse (HEMP) critical generation station component vulnerability test campaign with a focus on high-frequency, conducted early-time (E1) HEMP for the Department of Energy (DOE) Office of Cybersecurity, Energy Security, and Emergency Response (CESER). This report provides vulnerability test results to investigate component response and/or damage thresholds to reasonable HEMP threat levels that will help to inform site vulnerability assessments, mitigation planning, and modeling calibrations. This work details testing of North American Electric (NAE) magnetic motor starters to determine the effects of conducted HEMP environments. Motor starters are the control elements that provide power to motors throughout a generating plant; a starter going offline would cause loss of power to critical pumps and compressors, which could lead to component damage or unplanned plant outages. Additionally, failed starters would be unable to support plant startup. Six industrial motor starters were tested: two 2 horsepower (HP) starters with breaker disconnects and typical protection equipment, two 20 HP starters with breaker disconnects, and two 20 HP starters with fused disconnects. Each starter was placed in a circuit with a generator and inductive motor matching the starter rating. The conducted EMP insult was injected on the power cables passing through the motor starter, with separate tests for the generator and motor sides of the starter.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Next-Generation Marine Energy Software Needs Assessment

The U.S. Department of Energy (DOE) Water Power Technologies Office’s (WPTO) initial investment in marine energy software was driven by needs identified over a decade ago. WPTO-funded research was first launched because of a U.S. congressional mandate that called for the DOE to officially research marine energy technologies, which also established the DOE WPTO in 2008. A congressional mandate requested the WPTO to evaluate a variety of marine energy devices, establish baseline levelized cost of energy estimates, and provide an overall report to Congress. This congressional mandate led to the Reference Model Project (RMP), for which WPTO funded a national multi-laboratory team to develop these reference models, based on state-of-the-art designs of six marine energy converter archetypes that consisted of three current energy converters and three wave energy converters (WEC). Each device was designed to operate for a specific marine resource, thus allowing the devices to serve as reference models for future studies. The RMP congressional report cited the need for improved marine energy software to handle a variety of device designs, as well as a need to standardize performance outputs. Without validated software packages and established metrics, information presented to the WPTO by technology developers could be incorrect or inaccurate and result in misleading conclusions. The recommendation to coordinate WPTO investment in software for numerical modeling and analysis was given a high priority because it would directly fill needs at the time, and focused funding would amplify impact. By sponsoring software development, WPTO would provide industry developers, university researchers, and national laboratories software that could be used, customized, and advanced, thus supporting the overall advancement of marine energy.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Data Acquisition and Control for Marine Energy Devices: Cost Considerations

This document discusses the process involved with developing a data acquisition system specifically in the context of applications for Marine Renewable Energy (MRE) technologies however, much of what is presented is applicable to applications requiring data acquisition in general. The detail on the process is provided to highlight the critical steps and needs for a successful measurement campaign and to understand what can impact the overall outcome, cost, and schedule. The process presented is an amalgamation of best practices, lessons learned, recommendations, and prudent technical project planning and management. Data acquisition systems may be tightly integrated with or into the device under measurement and it often has its own dependencies that must be met. Therefore, early consideration and planning for the data acquisition system are stressed throughout this document.

13 HYDRO ENERGY↗
DOE OSTI2024

MADWEC Techno-Economic Analysis: Cooperative Research and Development Final Report

The objective of this project was for the facility to conduct a techno-economic assessment of the Maximal Asymmetric Drag Wave Energy Converter (MADWEC), developed by the University of Massachusetts Dartmouth (UMass Dartmouth), used for powering remote monitoring and AUV charging systems compared to other existing power supply options. The assessment estimates capital expenditures (CapEx), operational expenditures (OpEx), and power performance for 18 scenarios with the purpose of identifying key cost drivers, comparing total system cost, and comparing the power performance of the power supply options in terms of required installed capacity and estimated theoretical annual energy performance. The scenarios include two end-uses: (1) AUV charging and (2) offshore remote monitoring); three power sources: (1) MADWEC), (2) photovoltaic (PV) solar buoy, (3) and traditional battery swapping); and three locations; (1) nearshore, (2) far-offshore, and (3) high-latitude). In addition, other project goals included developing high level installation, operation, and maintenance plans for each scenario.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Confinement Exploiting Arrays of Cross-Flow Turbines (ConExT) (Final Scientific/Technical Report)

Final technical report for the ARPA-E SHARKS project: Confinement Exploiting Arrays of Cross-Flow Turbines (ConExT). This involved collaboration by the University of Washington, University of Wisconsin, National Renewable Energy Laboratory, and Oberon Insights. Cost-effective, large-scale utilization of tidal and river current resources requires turbine arrays. Most array concepts involve multiple, staggered rows of turbines analogous to wind farms. However, in water, turbines that have an appreciable projected area (i.e., the projected area over a full revolution) relative to a channel’s cross-sectional area can theoretically extract far more energy than when operating in isolation. This suggests substantial benefits to a confinement-exploiting approach to array layout, in which turbines are more densely clustered in a single row spanning a channel. The objective of this project was to move this concept from theory to practice, as well as establishing environmental and economic trade-offs. This objective was accomplished through scale-model experimentation, high-fidelity computational fluid dynamic simulation, and integrated techno-economic modeling.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Pyridinium Salts of Dehydrated Lanthanide Polychlorides

The reaction of lanthanide (Ln) chloride hydrates ([Ln(H 2 O) n (Cl) 3 ]) with pyridine (py) yielded a set of dehydrated pyridinium (py-H) Ln-polychloride salts. These species were crystallographically characterized as [[py-H-py][py-H] 2 [LnCl 6 ]] (Ln-6; Ln = La, Ce, Pr, Nd, Sm, Eu, Gd) or [[py-H] 2 [LnCl 5 (py)]] ((Ln-5; Ln = Tb, Dy, Ho, Er, Tm, Yb, Lu). The Ln-6 metal centers adopt an octahedral (OC-6) geometry, binding six Cl ligands. The -3 charge is off-set by two py-H moieties and a di-pyridinium (py-H-py) ion. For the Ln-5 species, an OC-6 anion is formed by the Ln cation binding a single py and five Cl ligands. The remaining -2 charge is offset by two py-H + cations that H-bond to the anion. Significant H-bonding occurs between the various cation/anion moieties inducing the molecular stability. The change in structure from the Ln-6 to Ln-5 is believed to be due to the Ln-contraction producing a smaller unit cell, which prevents formation of the py-H-py + cation, leading to the loss of the H-bonding-induced stability. Based on this, it was determined that the Ln-5 structures only exist when the lattice energy is small. While dehydrated polychloride salts can be produced by simply mixing in pyridine, the final structures adopted result from a delicate balance of cation size, Coulombic charge, and stabilizing H-bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Direct Ink-Write Printing of Ceramic Clay with an Embedded Wireless Temperature and Relative Humidity Sensor

This research presents a simple method to additively manufacture Cone 5 porcelain clay ceramics by using the direct ink-write (DIW) printing technique. DIW has allowed the application of extruding highly viscous ceramic materials with relatively high-quality and good mechanical properties, which additionally allows a freedom of design and the capability of manufacturing complex geometrical shapes. Clay particles were mixed with deionized (DI) water at different ratios, where the most suitable composition for 3D printing was observed at a 1:5 w/c ratio (16.2 wt.%. of DI water). Differential geometrical designs were printed to demonstrate the printing capabilities of the paste. In addition, a clay structure was fabricated with an embedded wireless temperature and relative humidity (RH) sensor during the 3D printing process. The embedded sensor read up to 65% RH and temperatures of up to 85 °F from a maximum distance of 141.7 m. The structural integrity of the selected 3D printed geometries was confirmed through the compressive strength of fired and non-fired clay samples, with strengths of 70 MPa and 90 MPa, respectively. This research demonstrates the feasibility of using the DIW printing of porcelain clay with embedded sensors, with fully functional temperature- and humidity-sensing capabilities.

42 ENGINEERING↗
DOE OSTI2026

Expert Elicitation for Tidal Energy Levelized Cost of Energy: Present and Future

In accordance with the Government Performance and Results Act (GPRA), H2O annually assesses marine energy technology development resulting from government-funded research and development programs and strategy. For GPRA reporting, H2O uses the levelized cost of energy (LCOE) - which represents the total system cost per unit of energy produced - to measure the progression of marine energy technology development, assess the impact of their research and development programs, and identify future research priorities. To support H2O's GPRA reporting requirements and inform future strategy, the National Laboratory of the Rockies conducted a tidal energy LCOE expert elicitation study to estimate present and future LCOE[AB2.1]. This report describes the motivation and background for the elicitation study, the methodology used to conduct the study, and the study results. It also provides future recommendations for accelerated tidal energy LCOE reduction based on feedback from study participants.

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Coexistence of Soft Modes and Dynamic Ti Disorder in Cubic BaTiO 3 Studied by Inelastic Neutron Scattering

The phonon dispersion relations in cubic BaTiO 3 have been measured along the [100], [110], and [111] directions at T = 453 K using inelastic neutron scattering. The isotropic transverse acoustic (TA) branches indicate that the interatomic force constant between Ba and O atoms in BaTiO 3 is large compared with that between Pb and O atoms in PbTiO 3 . The transverse optical (TO) branches along the [100] and [111] directions soften toward the Brillouin zone center. The TO branch along the [110] direction with [001] polarization is relatively low and flat, indicating the weak interatomic force constant between Ti and O atoms along the Ti–O chain. The intensity of inelastic diffuse scattering along the [100] and [110] directions increases with decreasing temperature down to 453 K. In conclusion, the present results suggest that the soft modes coexist with the dynamic Ti disorder in the Ti–O chain near the phase transition in the cubic phase.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗