Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atoms Molecules”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

JavaGenes Molecular Evolution

JavaGenes is a general-purpose, evolutionary software system written in Java. It implements several versions of a genetic algorithm, simulated annealing, stochastic hill climbing, and other search techniques. This software has been used to evolve molecules, atomic force field parameters, digital circuits, Earth Observing Satellite schedules, and antennas. This version differs from version 0.7.28 in that it includes the molecule evolution code and other improvements. Except for the antenna code, JaveGenes is available for NASA Open Source distribution.

Lohn, Jason↗
NASA NTRS2008

Magnetic Separator Enhances Treatment Possibilities

Since the earliest missions in space, NASA specialists have performed experiments in low gravity. Protein crystal growth, cell and tissue cultures, and separation technologies such as electrophoresis and magnetophoresis have been studied on Apollo 14, Apollo 16, STS-107, and many other missions. Electrophoresis and magnetophoresis, respectively, are processes that separate substances based on the electrical charge and magnetic field of a molecule or particle. Electrophoresis has been studied on over a dozen space shuttle flights, leading to developments in electrokinetics, which analyzes the effects of electric fields on mass transport (atoms, molecules, and particles) in fluids. Further studies in microgravity will continue to improve these techniques, which researchers use to extract cells for various medical treatments and research.

Source record↗
DOE OSTI2023

Real-time observation of multi-electron processes in atoms and diatomic molecules

We report on the implementation of a reliable experimental approach to observe, in real-time, electron dynamics in atoms and molecules at the attosecond time scale. The experimental approach combines a source of shape-controlled attosecond pulses, a stabilized XUV/IR interferometer for time-resolved measurements, and a multi-particle imaging system (Coltrims). In addition, we report new capabilities to control electron dynamics in quantum systems.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Materials Data on In7GeIrO8 by Materials Project

IrIn7GeO8 crystallizes in the cubic F-43m space group. The structure is three-dimensional and consists of four iridium atom molecules and one In7GeO8 framework. In the In7GeO8 framework, there are two inequivalent In+1.29+ sites. In the first In+1.29+ site, In+1.29+ is bonded in a 4-coordinate geometry to four O2- atoms. There are two shorter (2.26 Å) and two longer (2.41 Å) In–O bond lengths. In the second In+1.29+ site, In+1.29+ is bonded in a tetrahedral geometry to four equivalent O2- atoms. All In–O bond lengths are 2.15 Å. Ge4+ is bonded in a tetrahedral geometry to four equivalent O2- atoms. All Ge–O bond lengths are 1.80 Å. There are two inequivalent O2- sites. In the first O2- site, O2- is bonded in a 4-coordinate geometry to three equivalent In+1.29+ and one Ge4+ atom. In the second O2- site, O2- is bonded to four In+1.29+ atoms to form corner-sharing OIn4 tetrahedra.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Electron-atom /molecule/ collision processes

Electron-atom (molecule) collision processes at low and intermediate energies, from near threshold to a few hundred electron volts, are discussed. Attention is given to experimental techniques and procedures, electron impact cross sections, impact excitation and electron-atom scattering in laser fields. Specific examples are presented that illustrate various experimental techniques and interpretations of observations.

Trajmar, S.↗
DOE OSTI2020

Materials Data on Te8IrI5 by Materials Project

Ir(Te)2Te6I5 crystallizes in the triclinic P-1 space group. The structure is one-dimensional and consists of two iridium atom molecules; four telloy molecules; and one Te6I5 ribbon oriented in the (1, 0, 0) direction. In the Te6I5 ribbon, there are six inequivalent Te+0.25+ sites. In the first Te+0.25+ site, Te+0.25+ is bonded in a single-bond geometry to one I1- atom. The Te–I bond length is 3.13 Å. In the second Te+0.25+ site, Te+0.25+ is bonded in a distorted single-bond geometry to two I1- atoms. There are one shorter (3.23 Å) and one longer (3.65 Å) Te–I bond lengths. In the third Te+0.25+ site, Te+0.25+ is bonded in a single-bond geometry to one I1- atom. The Te–I bond length is 3.42 Å. In the fourth Te+0.25+ site, Te+0.25+ is bonded in a rectangular see-saw-like geometry to four I1- atoms. There are a spread of Te–I bond distances ranging from 2.89–3.18 Å. In the fifth Te+0.25+ site, Te+0.25+ is bonded in a distorted bent 150 degrees geometry to two I1- atoms. There are one shorter (3.40 Å) and one longer (3.55 Å) Te–I bond lengths. In the sixth Te+0.25+ site, Te+0.25+ is bonded in a bent 150 degrees geometry to two I1- atoms. There are one shorter (3.47 Å) and one longer (3.55 Å) Te–I bond lengths. There are five inequivalent I1- sites. In the first I1- site, I1- is bonded in a distorted water-like geometry to two Te+0.25+ atoms. In the second I1- site, I1- is bonded in a distorted water-like geometry to two Te+0.25+ atoms. In the third I1- site, I1- is bonded in a single-bond geometry to one Te+0.25+ atom. In the fourth I1- site, I1- is bonded in a 1-coordinate geometry to three Te+0.25+ atoms. In the fifth I1- site, I1- is bonded in a 1-coordinate geometry to four Te+0.25+ atoms.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Molecule formation by inverse predissociation

The general theory of inverse predissociation is described, and is applied to specific molecules. The list of molecules which can be formed by radiative association will be lengthened considerably by considering this phenomenon. Typical rate constants for diatoms will lie in the range 10 to the minus 16th power to 10 to the minus 20th power cu cm/sec/molecule, with the heavy atom molecules such as CN, CO, or NO generally having larger rates than the hydrides. An attempt is made to point out what molecular characteristics determine the radiative association rate and also to make estimates of what rates may be expected for various interstellar molecules. The formal theory is developed, and the molecular properties are discussed which determine the inverse predissociation rate. The details of the theory as applied to specific interstellar molecules are studied.

Julienne, P. S.↗
DOE OSTI2022

Universality of Dicke superradiance in arrays of quantum emitters

Abstract Dicke superradiance is an example of emergence of macroscopic quantum coherence via correlated dissipation. Starting from an initially incoherent state, a collection of excited atoms synchronizes as they decay, generating a macroscopic dipole moment and emitting a short and intense pulse of light. While well understood in cavities, superradiance remains an open problem in extended systems due to the exponential growth of complexity with atom number. Here we show that Dicke superradiance is a universal phenomenon in ordered arrays. We present a theoretical framework – which circumvents the exponential complexity of the problem – that allows us to predict the critical distance beyond which Dicke superradiance disappears. This critical distance is highly dependent on the dimensionality and atom number. Our predictions can be tested in state of the art experiments with arrays of neutral atoms, molecules, and solid-state emitters and pave the way towards understanding the role of many-body decay in quantum simulation, metrology, and lasing.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Reconstruction of effective potential from statistical analysis of dynamic trajectories

The broad incorporation of microscopic methods is yielding a wealth of information on the atomic and mesoscale dynamics of individual atoms, molecules, and particles on surfaces and in open volumes. Analysis of such data necessitates statistical frameworks to convert observed dynamic behaviors to effective properties of materials. Here, we develop a method for the stochastic reconstruction of effective local potentials solely from observed structural data collected from molecular dynamics simulations (i.e., data analogous to those obtained via atomically resolved microscopies). Using the silicon vacancy defect in graphene as a model, we apply the statistical framework presented herein to reconstruct the free energy landscape from the calculated atomic displacements. Evidence of consistency between the reconstructed local potential and the trajectory data from which it was produced is presented, along with a quantitative assessment of the uncertainty in the inferred parameters.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2022

Emerging Electrochemical Techniques for Probing Site Behavior in Single-Atom Electrocatalysts

Single-atom catalysts (SACs) have aroused tremendous interest over the past decade, particularly in the community of energy and environment-related electrocatalysis. A rapidly growing number of recent publications have recognized it as a promising candidate with maximum atomic utilization, distinct activity, and selectivity in comparison to bulk catalysts and nanocatalysts. However, the complexity of localized coordination environments and the dispersion of isolated sites lead to significant difficulties when it comes to gaining insight into the intrinsic behavior of electrocatalytic reactions. Furthermore, the low metal loadings of most SACs make conventional ensemble measurements less likely to be accurate on the subnanoscale. Thus, it remains challenging to probe the activity and properties of individual atomic sites by available commercial instruments and analytical methods. In spite of this, continuing efforts have lately focused on the development of advanced measurement methodologies, which are very useful to the fundamental understanding of SACs. There have recently been a number of in situ/operando techniques applied to SACs, such as electron microscopy, spectroscopy, and other analysis methods, which support relevant functions to identify the active sites and reaction intermediates and to investigate the dynamic behavior of localized structures of the catalytic sites. This Account aims to present recent electrochemical probing techniques which can be used to identify single-atomic catalytic sites within solid supports. First, we describe the basic principles of molecular probe methods for the study and analysis of electrocatalytic site behavior. In particular, the in situ probing technique enabled by surface interrogation scanning electrochemical microscopy (SISECM) can measure the active site density and kinetic rate with high resolution. An alternative electrochemical probing technique is further demonstrated on the basis of single-entity electrochemistry, which allows the unique electrochemical imaging of the size and catalytic rate of single atoms, molecules, and clusters. Next, the merits and limitations of different electrochemical techniques are then discussed, along with perspectives for future prospects. Apart from this, we further showcase the powerful capability of emerging electrochemical probing techniques for determining significant effects and properties of SACs for various electrocatalytic reactions, including oxygen reduction and evolution, hydrogen evolution, and nitrate reduction. Overall, electrochemical techniques with atomic resolution have greatly increased opportunities for observing, measuring, and understanding the surface and interface chemistry during energy conversion. In the future, it is anticipated that the development of electrochemical probing techniques will be advanced with innovative perspectives on the behavior and features of SACs. We hope that this Account can contribute in several ways to promoting the fundamental knowledge and technical progress of emerging electrochemical measurements for studying SACs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2017

Limits to Creation of Oxygen-Rich Atmospheres on Planets in the Outer Reaches of the Conventional Habitable Zone

Abundant free oxygen appears to be a requirement for macroflora and macrofauna. To the best of our knowledge, a general discussion of which habitable planets are conducive to oxygen has not taken place. Theories for the rise of oxygen fall into 4 categories: (i) It is governed by an intrinsic rate of biological innovation, independent of environmental factors. (ii) It is caused by mantle evolution, probably consequent to secular cooling. (iii) It is caused by hydrogen escape, which irreversibly oxidizes the Earth. (iv) It is Gaia's response to the brightening Sun, its rise prevented until reduced greenhouse gases were no longer needed to maintain a clement climate. All but the first of these make implicit astronomical predictions that can be quantified and made explicit. Here we address the third hypothesis. In this hypothesis hydrogen escape acts like an hourglass that continues until all relevant reduced mineral buffers have been oxidized (titrated, as it were) and the surface made safe for O2. The hypothesis predicts that abundant free O2 will be absent from habitable planets that have not experienced significant hydrogen escape. Where hydrogen escape is modest or insignificant, the atmosphere can be approximated as hydrostatic, which makes assessing radiative cooling by embedded molecules, atoms, and ions such as CO2 and H3+ straightforward. In particular, H2 is efficient at exciting non-LTE CO2 15 micron emission, which makes radiative cooling very effective when H2 is abundant. We can therefore map out the region of phase space in which habitable planets do not lose hydrogen, and therefore do not develop O2 atmospheres. A related matter is the power of radiative cooling by embedded molecules to enforce the diffusion limit to hydrogen escape. This matter in particular is relevant to addressing the empirical observation that rocky planets with thin or negligible atmospheres are rarely or never bigger than approx.1.6 Earth radii.

Zahnle, Kevin↗
DOE OSTI2024

Resonant inelastic x-ray scattering in warm-dense Fe compounds beyond the SASE FEL resolution limit

Resonant inelastic x-ray scattering (RIXS) is a widely used spectroscopic technique, providing access to the electronic structure and dynamics of atoms, molecules, and solids. However, RIXS requires a narrow bandwidth x-ray probe to achieve high spectral resolution. The challenges in delivering an energetic monochromated beam from an x-ray free electron laser (XFEL) thus limit its use in few-shot experiments, including for the study of high energy density systems. Here we demonstrate that by correlating the measurements of the self-amplified spontaneous emission (SASE) spectrum of an XFEL with the RIXS signal, using a dynamic kernel deconvolution with a neural surrogate, we can achieve electronic structure resolutions substantially higher than those normally afforded by the bandwidth of the incoming x-ray beam. We further show how this technique allows us to discriminate between the valence structures of Fe and Fe2O3, and provides access to temperature measurements as well as M-shell binding energies estimates in warm-dense Fe compounds.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2025

Siegert-pseudostate formulation with B-splines

Siegert states (SSs) serve as a useful basis for studying quantum scattering from finite-range potentials. Since they form a discrete instead of continuous set of eigen-solutions, SSs are convenient for performing electronic structure calculations in atoms, molecules, and plasmas. Numerical instabilities may arise, however, in the computation of SSs if the potential vanishes for some extended region, a situation commonly occurring in plasma calculations. Here, in this paper, we identify the cause of these instabilities as the use of non-localized radial basis functions. We thus advocate the use of localized radial basis functions, in particular B-splines, for more robust computations of SSs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Local Spin Density Approximation Strongly Improved by a Better-Informed Local Scaling of Its Self-Interaction Correction

The Perdew−Zunger self-interaction correction (PZSIC) makes density functional approximations (DFAs) exact for all one-electron densities. However, it overcorrects in manyelectron regions, introducing errors for the uniform-density limit, where uncorrected DFAs are exact. The locally scaled PZSIC (LSIC), based on the iso-orbital indicator zσ [which distinguishes single-orbital and slowly varying density regions and is used with the local spin density approximation (LSDA)], restores the uniform-density limit and significantly improves results for many properties, including chemical reaction barrier heights, atomization energies, and ionization potentials. Yet, LSIC performs poorly for weakly bonded systems, leaving many unbound, due to limitations of its iso-orbital indicator. To correct this, in this work we propose a new local scaling, LSIC-α, based on the iso-orbital indicator ασ (which additionally identifies regions of overlapping density tails). A two-parameter scaling function of ασ is fitted to a subset of the nonbonded appropriate norms for the SCAN and r2SCAN meta- GGAs, and tested on many properties of main-group atoms, molecules, and molecular complexes. LSIC-α greatly improves the interaction energies of weakly bonded systems in the S22 data set while retaining LSIC’s accuracy for other properties. This work shows that the errors of LSDA (and presumably of higher-level DFAs) can be largely but not entirely repaired by a proper “do no harm” self-interaction correction.

Approximation↗
DOE OSTI2021

Toward Å-fs-meV Resolution in Electron Microscopy: Systematic Simulation of the Temporal Spread of Single-Electron Packets

Though efforts to improve the temporal resolution of transmission electron microscopes (TEMs) have waxed and waned for decades, with relatively recent advances routinely reaching sub-picosecond scales, fundamental and practical challenges have hindered the advance of combined Å-fs-meV resolutions, particularly for core-loss spectroscopy and real-space imaging. This is due in no small part to the complexity of the approach required to access timescales upon which electrons, atoms, molecules, and materials first begin to respond and transform – attoseconds to picoseconds. Here we present part of a larger effort devoted to systematically mapping the instrument parameter space of a TEM modified to reach ultrafast timescales. With General Particle Tracer, we studied the statistical temporal distributions of single-electron packets as a function of various fs pulsed-laser parameters and electron-gun configurations and fields for the exact architecture and dimensions of a Thermo Fisher Tecnai Femto ultrafast electron microscope. We focused on easily-adjustable parameters, such as laser pulse duration, laser spot size, photon energy, Wehnelt aperture diameter, and photocathode size. In addition to establishing trends and dispersion behaviors, we identify regimes within which packet duration can be 100s of fs and approach the 300-fs laser limit employed here. Overall, the results provide a detailed picture of the temporal behavior of single-electron packets in the Tecnai Femto gun region, forming the initial contribution of a larger effort.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Impact of environmental oxygen on nanoparticle formation and agglomeration in aluminum laser ablation plumes

Here, the role of ambient oxygen gas (O 2 ) on molecular and nanoparticle formation and agglomeration was studied in laser ablation plumes. As a lab-scale surrogate to a high explosion detonation event, nanosecond laser ablation of an aluminum alloy (AA6061) target was performed in atmospheric pressure conditions. Optical emission spectroscopy and two mass spectrometry techniques were used to monitor the early to late stages of plasma generation to track the evolution of atoms, molecules, clusters, nanoparticles, and agglomerates. The experiments were performed under atmospheric pressure air, atmospheric pressure nitrogen, and 20% and 5% O 2 (balance N 2 ), the latter specifically with in situ mass spectrometry. Electron microscopy was performed ex situ to identify crystal structure and elemental distributions in individual nanoparticles. We find that the presence of ≈20% O 2 leads to strong AlO emission, whereas in a flowing N 2 environment (with trace O 2 ), AlN and strong, unreacted Al emissions are present. In situ mass spectrometry reveals that as O 2 availability increases, Al oxide cluster size increases. Nanoparticle agglomerates formed in air are found to be larger than those formed under N 2 gas. High-resolution transmission electron microscopy demonstrates that Al 2 O 3 and AlN nanoparticle agglomerates are formed in both environments; indicating that the presence of trace O 2 can lead to Al 2 O 3 nanoparticle formation. The present results highlight that the availability of O 2 in the ambient gas significantly impacts spectral signatures, cluster size, and nanoparticle agglomeration behavior. These results are relevant to understanding debris formation in an explosion event, and interpreting data from forensic investigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Accelerating Ultrafast Spectroscopy with Compressive Sensing

We report ultrafast spectroscopy is an important tool for studying photoinduced dynamical processes in atoms, molecules, and nanostructures. Typically, the time to perform these experiments ranges from several minutes to hours depending on the choice of spectroscopic method. It is desirable to reduce this time overhead not only to shorten time and laboratory resources, but also to make it possible to examine fragile specimens that quickly degrade during long experiments. In this article, we motivate using compressive sensing to significantly shorten data acquisition time by reducing the total number of measurements in ultrafast spectroscopy. We apply this technique to experimental data from ultrafast transient absorption spectroscopy and ultrafast terahertz spectroscopy and show that good estimates can be obtained with as low as 15% of the total measurements, implying a sixfold reduction in the data acquisition time.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Electric Field Analysis in a Cold-Ion Source Using Stark Spectroscopy of Rydberg Atoms

Here, we analyze electric fields in ion sources generated by quasicontinuous photoionization of cold Rb atoms trapped in the focal spot of a near-concentric, in-vacuum cavity for 1064-nm laser light. Ion streams are extracted with an external electric field, F. Stark effects of Rb 57F and of nearby high-angular-momentum Rydberg levels, which exhibit large, linear Stark shifts, are employed to study the net electric-field probability distribution within the ion-source region over an extraction-field range of 0 < F < 0.35 V/cm. For F = 0, we also investigate ion-field-induced Stark spectra of the 60P 1/2 state, which exhibits a (lesser) quadratic electric-field response that affords a simplified electric-field analysis. Experimental Rydberg spectra are compared with theoretical Stark spectra, which are weighted with net electric-field distributions obtained from classical ion-trajectory simulations that include Coulomb interactions. Experiments and models are in good agreement. At small F and high ion-source rates, the field approximately follows a Holtsmark distribution, and the ion streams are degraded by the Coulomb microfields. With increasing F and at lower ion-source rates, the fields become narrowly distributed around F, resulting in directional ion streams that are less degraded by microfields. Our results are of interest for monitoring cold-ion sources for focused-ion-beam applications, where Coulomb interactions are of concern, and for studies of electric fields in cold plasmas.

74 ATOMIC AND MOLECULAR PHYSICS↗