Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Apparent optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

SC 2059-247 - An unusual radio/X-ray source in a distant cluster of galaxies

The X-ray, optical and radio properties of a high redshift, Bautz-Morgan type I cluster of galaxies, namely SC 2059-247, are examined. This cluster is optically dominated by a cD galaxy with a powerful flat-spectrum radio source coincident with the possibly stellar nucleus. Two possible interpretations are suggested for the apparently soft X-ray spectrum of the extremely luminous cluster. Either the intracluster gas is much cooler in high-redshift clusters because they are less relaxed, or the X-ray and radio emissions from SC 2059-247 are the result of a nonthermal QSO/BL Lac type object in the nucleus of the cD. If the latter, it would be the first time that an X-ray source similar to a quasar or BL Lac object has been discovered in a previously identified galaxy.

White, R. A.↗
NASA NTRS1986

Microstructure/mechanical property relationships for various thermal treatments of Al-Cu-Mg-X PM aluminum alloys

The thermal response and aging behavior of three 2XXX-series powder metallurgy aluminum alloys have been investigated, using Rockwell B hardness measurements, optical and electron microscopy, and energy-dispersive chemical analysis, in order to correlate microstructure with measured mechanical properties. Results of the thermal response study indicated that an increased solution heat treatment temperature was effective in resolutionizing large primary constituents in the alloy bearing more copper but had no apparent effect on the microconstituents of the other two. Aging studies conducted at room temperature and at 120, 150, and 180 C for times ranging up to 60 days indicated that classic aging response curves, as determined by hardness measurements, occurred at lower aging temperatures than were previously studied for these alloys, as well as at lower aging temperatures than are commonly used for ingot metallurgy alloys of similar compositions. Microstructural examination and fracture surface analysis of peak-aged tension specimens indicated that the highest tensile strengths are associated with extremely fine and homogeneous distributions of theta-prime or S-prime phases combined with low levels of both large constituent particles and dispersoids. Examination of the results suggest that refined solution heat treatments and lower aging temperatures may be necessary to achieve optimum mechanical properties for these 2XXX series alloys.

Blackburn, L. B.↗
NASA NTRS2014

Amazon Forests Maintain Consistent Canopy Structure and Greenness During the Dry Season

The seasonality of sunlight and rainfall regulates net primary production in tropical forests. Previous studies have suggested that light is more limiting than water for tropical forest productivity, consistent with greening of Amazon forests during the dry season in satellite data.We evaluated four potential mechanisms for the seasonal green-up phenomenon, including increases in leaf area or leaf reflectance, using a sophisticated radiative transfer model and independent satellite observations from lidar and optical sensors. Here we show that the apparent green up of Amazon forests in optical remote sensing data resulted from seasonal changes in near-infrared reflectance, an artefact of variations in sun-sensor geometry. Correcting this bidirectional reflectance effect eliminated seasonal changes in surface reflectance, consistent with independent lidar observations and model simulations with unchanging canopy properties. The stability of Amazon forest structure and reflectance over seasonal timescales challenges the paradigm of light-limited net primary production in Amazon forests and enhanced forest growth during drought conditions. Correcting optical remote sensing data for artefacts of sun-sensor geometry is essential to isolate the response of global vegetation to seasonal and interannual climate variability.

dry season↗
NASA NTRS1995

Scales of variability of bio-optical properties as observed from near-surface drifters

A drifter equipped with bio-optical sensors and an automated water sampler was deployed in the California Current as part of the coastal transition zone program to study the biological, chemical, and physical dynamics of the meandering filaments. During deployments in 1987 and 1988, measurements were made of fluorescence, downwelling irradiance, upwelling radiance, and beam attenuation using several bio-optical sensors. Samples were collected by an automated sampler for later analysis of nutrients and phytoplankton species compositon. Large-scale spatial and temporal changes in the bio-optical and biological properties of the region were driven by changes in phytoplankton species composition which, in turn, were associated with the meandering circulation. Variance spectra of the bio-optical paramenters revealed fluctuations on both diel and semidiurnal scales, perhaps associated with solar variations and internal tides, respectively. Offshore, inertial-scale fluctuations were apparent in the variance spectra of temperature, fluorescence, and beam attenuation. Although calibration samples can help remove some of these variations, these results suggest that the use of bio-optical data from unattended platforms such as moorings and drifters must be analyzed carefully. Characterization of the scaled of phytoplankton variability must account for the scales of variability in the algorithms used to convert bio-optical measurments into biological quantities.

Abbott, Mark R.↗
DOE OSTI2021

Impact of Photon Recycling, Grain Boundaries, and Nonlinear Recombination on Energy Transport in Semiconductors

Energy carrier transport and recombination in semiconductors can be directly monitored with optical microscopy, revealing key insights into fundamental photophysics and informs efficient optoelectronic device design. Oftentimes, energy transport is measured by monitoring a time-resolved expanding carrier profile after optical excitation under a focused laser beam. Although this approach has gained widespread adoption, the presence of competing dynamic processes, such as diffusion and photon recycling, has made it difficult to accurately extract and understand important semiconductor properties. Here, we develop and apply a new framework for modeling energy transport in both excitonic and free carrier semiconductors. Here, we demonstrate that processes such as nonlinear recombination and photon recycling can have a significant impact on the apparent energy carrier profiles, especially for excitonic materials with short radiative lifetimes. Additionally, we find that film microstructure can lead to unique transport profiles that strongly depends on material boundary behavior and the difference between feature size and diffusion length. Here, these findings provide a deeper understanding of energy transport in semiconducting materials and provide new strategies for the design and optimization of electronic and optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2001

Characterizing the Influence of the General Circulation on Marine Boundary Layer Clouds

The seasonal and intraseasonal variability of boundary layer cloud in the subtropical eastern oceans are studied using combined data from the International Satellite Cloud Climatology Project (ISCCP) and the European Centre for Medium-Range Weather Forecasts (ECMWF) reanalysis. Spectral analysis reveals that most of the time variability of cloud properties occurs on seasonal to annual time scales. The variance decreases one to two orders of magnitude for each decade of time scale decrease, indicating that daily to monthly time scales have smaller, but non-negligible variability. The length of these dominant time scales suggests that the majority of the variability is influenced by the general circulation and its interaction with boundary layer turbulence, rather than a product of boundary layer turbulence alone. Previous datasets have lacked the necessary resolution in either time or in space to properly characterize variability on synoptic scales; this is remedied by using global satellite-retrieved cloud properties. We characterize the intraseasonal subtropical cloud variability in both hemispheres and in different seasons. In addition to cloud fraction, we examine variability of cloud optical thickness - cloud top pressure frequency distributions. Despite the large concentration of research on the variability of Northern Hemisphere (NH) regions during summer, it is noted that the largest amplitude intraseasonal variability in the NH regions occurs during local winter. The effect of intraseasonal variability on the calculation and interpretation of seasonal results is investigated. Decreases in seasonally averaged cloud cover, optical thickness and cloud top pressure from the May-through-September season to the November-through-March season are most apparent in the NH regions. Further analysis indicates that these changes are due to an increase in frequency, but a decrease in the persistence of synoptic events. In addition, changes in cloud top pressure and optical thickness characteristics from the summer to winter seasons indicate that the NH subtropics undergo a change in dynamic regime with season. This change appears in the cloud fields as a shift from the more commonly seen lower-altitude, thicker optical thickness clouds to higher-altitude, thinner clouds. The latter cloud-type is associated with the lower sea level pressure, upward vertical velocity phase of the synoptic wave. Intraseasonal changes in cloud properties in the Southern Hemisphere and NH summer are much smaller in amplitude. Although they also appear to be linked to changes in the large-scale dynamics, similarly to NH winter variations, the relationships are more ambiguous due to the small amplitudes and longer time scales. We attempt to interpret some of these relationships using the results of the Betts and Ridgway (1989) box model. However, these results cannot consistently explain the patterns when results from all regions are considered, implying that this model may not adequately explain all the processes involved in the variability.

Rozendaal, Margaret A.↗
NASA NTRS2021

An Investigation of the Grain Size and Adhesion Strength of High-Speed Impact Ice

Ice accumulation on aircraft from supercooled water droplets (impact icing) can increase drag and decrease lift, leading to a decrease in fuel efficiency and a potential for unsafe situations. Anti-icing materials and coatings are of high interest to prevent aircraft icing. Because no anti-icing material suitable for in-flight situations has been realized, icing models aim to predict the accumulation and shape of the ice to understand its effects. In both cases, understanding the physical mechanism behind ice adhesion and shedding is necessary. A recent literature review has shown that the apparent ice adhesion strength to any specific material varies over several orders of magnitude across studies and test methods. One of the reasons for this high variance is likely to be the varying microstructure of the ice used for different studies. Although the microstructure of impact ice has been studied in the past, those conditions were not relevant to that of in-flight aircraft icing. The microstructure of the ice formed will determine both its bulk and surface properties, yet it has been overlooked in the ice adhesion community. Here, we use optical microscopy to study the non-uniform ice crystal grain size in impact ice accreted in NASA Glenn Research Center’s Icing Research Tunnel at various icing conditions. Similar to other environmental conditions studied in the literature, we show an increase in grain size at larger distances from the growth interface; however, the data shows substantially larger grains than what was expected from the prior literature. Ice accrued at lower temperatures has a smaller grain size at all distances from the growth interface. No change in grain size was noticed when varying only the wind speed. A correlational analysis shows that smaller grain sizes at the growth interface corresponded to an increase in the apparent ice adhesion strength when the adhesive failure was interfacial, but not when the failure was cohesive. These results may explain the overall trend in the literature of increasing apparent adhesion strength with decreasing temperature. Incorporating microstructure trends for various environmental conditions in icing models may increase the certainty in predicting ice adhesion strength and shedding, and will provide a better basis for comparison between adhesive tests on ice produced in different facilities and at different storage times.

• Ice Fabric↗
NASA NTRS2001

Analysis of Ag/FEP Control Blanket Performance from Multiple Satellites

Published data reporting the change in solar absorptance as a function of time on orbit for certain satellites has been re-examined. The optical property change of metallized FEP as a function of total particulate radiation dose received by specific satellites has been estimated. Results tend to follow a common trend and a design curve has been constructed to estimate solar absorptance change as a function of radiation dose for metallized FEP at any altitude. Effects due to apparent contamination on several of the satellites are addressed and taken into account in determining property changes. Data from LDEF, ML-101, NavStar 1-5, NTS-2, the SCATHA experiment, and SOLRAD 11 are used as the basis of the design curve. A similar comparison is made between published atomic oxygen recession data from numerous Space Shuttle flights, a LEO experiment flown by Lockheed, and LDEF results. Variation of atomic oxygen recession rate of FEP as a function of exposure conditions is determined.

Pippin, H. G.↗
NASA NTRS1975

Mariner 9 ultraviolet spectrometer experiment - Scattering properties of Hellas

A least-squares analysis of 709 Mariner 9 UV spectra obtained over Hellas from Revolution 140 to 214 (Jan. 22, 1972, to Feb. 28, 1972) showed the extinction optical depth of the atmosphere above Hellas to be 0.5 plus or minus 0.2. This is evidence of lingering dust in the Hellas basin. An atmospheric model, combining dust and Rayleigh scattering, was used to make an apparent pressure map of Hellas. Anomalously high pressures are interpreted as clouds developing over the southern part of Hellas near the time of autumnal equinox. The blue ratio (reflectance at 2680 A divided by reflectance at 3050 A) showed a 20% increase from Revolution 40 to Revolution 74, attributed to the decay of the dust storm. Thereafter, the blue ratio remained essentially constant through Revolution 214, which implies that the rate of clearing in Hellas was much slower than that planetwide.

Ajello, J. M.↗
NASA NTRS1992

Ultraviolet observations of clusters of Wolf-Rayet stars in the SBm3 galaxy NGC 4214 and Ultraviolet and optical observations of LINER's

The purpose of the grant was to obtain and analyze IUE (UV) and ground-based (optical) spectra of the central bar of NGC 4214, which contains several bright H II regions, in order to further explore the properties of the Wolf-Rayet stars in this galaxy. Several spatially distinct regions, with widely different equivalent widths of optical Wolf-Rayet lines, could be sampled by the large IUE entrance aperture. By using newly developed extraction techniques, the spectra of these H II regions could be isolated, and differences in their stellar populations would be systematically studied. Data were obtained with IUE in late February and early March, 1992. Some of the shifts were successful, but a few were not -- apparently the blind offset from the nearby star did not work equally well in all cases. Thus, the signal-to-noise ratio is somewhat lower than we had hoped. This necessitated a more careful extraction of the spectra of individual H II regions from the two-dimensional spectra. (A program that models the point spread function in the spatial direction was used to deblend the distinct H II regions.) The IUE data are currently being analyzed in conjunction with ground-based optical spectra. There appear to be obvious variations in the stellar population over angular scales of only a few arc seconds. The second part of the research performed under this grant was a continuation of a project that uses IUE (UV) and ground-based (optical) spectra to infer the physical conditions in Low-Ionization Nuclear Emission-Line Regions (LINER's). We have obtained spectra of a few key objects that cover a representative range in LINER continuum and emission-line properties. The overall goals are to (1) separate the emission into spatially distinct components, (2) establish whether the observed nuclear ultraviolet continua indicate sufficient photoionizing fluxes to account for the emission lines, (3) determine whether the nuclear emission can be explained by hot stars alone, (4) detect and measure the strengths of UV emission lines, and (5) search for systematic differences in the UV spectra of LINER's whose other properties differ in some respects.

Filippenko, Alexei V.↗
NASA NTRS2012

Polarimetric Retrievals of Surface and Cirrus Clouds Properties in the Region Affected by the Deepwater Horizon Oil Spill

In 2010, the Goddard Institute for Space Studies (GISS) Research Scanning Polarimeter (RSP) performed several aerial surveys over the region affected by the oil spill caused by the explosion of the Deepwater Horizon offshore platform. The instrument was deployed on the NASA Langley B200 aircraft together with the High Spectral Resolution Lidar (HSRL), which provides information on the distribution of the aerosol layers beneath the aircraft, including an accurate estimate of aerosol optical depth. This work illustrates the merits of polarization measurements in detecting variations of ocean surface properties linked to the presence of an oil slick. In particular, we make use of the degree of linear polarization in the glint region, which is severely affected by variations in the refractive index but insensitive to the waviness of the water surface. Alterations in the surface optical properties are therefore expected to directly affect the polarization response of the RSP channel at 2264 nm, where both molecular and aerosol scattering are negligible and virtually all of the observed signal is generated via Fresnel reflection at the surface. The glint profile at this wavelength is fitted with a model which can optimally estimate refractive index, wind speed and direction, together with aircraft attitude variations affecting the viewing geometry. The retrieved refractive index markedly increases over oil-contaminated waters, while the apparent wind speed is significantly lower than in adjacent uncontaminated areas, suggesting that the slick dampens high-frequency components of the ocean wave spectrum. The constraint on surface reflectance provided by the short-wave infrared channels is a cornerstone of established procedures to retrieve atmospheric aerosol microphysical parameters based on the inversion of the RSP multispectral measurements. This retrieval, which benefits from the ancillary information provided by the HSRL, was in this specific case hampered by prohibitive variability in atmospheric conditions (very inhomogeneous aerosol distribution and cloud cover). Although the results presented for the surface are essentially unaffected, we discuss the results obtained by typing algorithms in sorting the complex mix of aerosol types, and show evidence of oriented ice in cirrus clouds present in the area. In this context, polarization measurements at 1880 nm were used to infer ice habit and cirrus optical depth, which was found in the subvisual/threshold-visible regime, confirming the utility of the aforementioned RSP channel for the remote sensing of even thin cold clouds.

Polarization↗
NASA NTRS1992

Measured and calculated optical property profiles in the mixed layer and free troposphere

Nearly simultaneous measurements of the physical and optical properties of mixed layer and free tropospheric aerosols near Boulder, Colorado, were made on several occasions using aircraft, balloon, and ground-based sensors. This effort (Front Range Lidar, Aircraft, and Balloon experiment (FRLAB)) was conducted with the purpose of obtaining a diverse, self-consistent data set that could be used for testing optical model calculations based on measured physical characteristics such as apparent size distribution, composition, and shape. It was found that even with the uncertainties involved, the model predictions are in good agreement with the measurements in the visible and near infrared wavelength regions. At CO2 lidar wavelengths there is considerably more uncertainty in both the calculated and measured values; however, within the estimated errors there appears to be satisfactory agreement except for the highest free tropospheric layer studied. The results also indicate that during FRLAB the aerosol in the boundary layer and free troposphere behaved as spherical particles for optical modeling purposes. The utility of the observations for determining the extinction-to-backscatter ratio relevant to aerosols in the boundary layer and free troposphere is described with typical measured values being in the 20 to 30 sr range.

Rosen, James M.↗
NASA NTRS1993

Interplanetary meteoroid debris in LDEF metal craters

We have examined craters in Al and Au LDEF surfaces to determine the nature of meteoroid residue in the rare cases where projectile material is abundantly preserved in the crater floor. Typical craters contain only small amounts of residue and we find that less than 10 percent of the craters in Al have retained abundant residue consistent with survival of a significant fraction (greater than 20 percent) of the projectile mass. The residue-rich craters can usually be distinguished optically because their interiors are darker than ones with little or no apparent projectile debris. The character of the meteoroid debris in these craters ranges from thin glass liners, to thick vesicular glass containing unmelted mineral fragments, to debris dominated by unmelted mineral fragments. In the best cases of meteoroid survival, unmelted mineral fragments preserve both information on projectile mineralogy as well as other properties such as nuclear tracks caused by solar flare irradiation. The wide range of the observed abundance and alteration state of projectile residue is most probably due to differences in impact velocity. The crater liners are being studied to determine the composition of meteoroids reaching the Earth. The compositional types most commonly seen in the craters are: (1) chondritic (Mg, Si, S, Fe in approximately solar proportions), (2) Mg silicate. amd (3) iron sulfide. These are also the most common compositional types of extraterrestrial particle types collected in the stratosphere. The correlation between these compositions indicates that vapor fractionation was not a major process influencing residue composition in these craters. Although the biases involved with finding analyzable meteoroid debris in metal craters differ from those for extraterrestrial particles collected in and below the atmosphere, there is a common bias favoring particles with low entry velocity. For craters this is very strong and probably all of the metal craters with abundant residue were caused by asteroidal dust impacting at minimum velocities.

Brownlee, D. E.↗
NASA NTRS2003

Study of Dislocation-Ordered In(x)Ga(1-x)As/GaAs Quantum Dots

A report describes an experimental study of dislocation-induced spatial ordering of quantum dots (QDs) comprising nanometer-sized In(x)Ga(1-x)As islands surrounded by GaAs. Metastable heteroepitaxial structures were grown by molecular-beam epitaxy of In(x)Ga(1-x)As onto n+ GaAs and semi-insulating GaAs substrates. Then the structures were relaxed during a post-growth annealing/self-organizing process leading to the formation of surface undulations that acted as preferential sites for the nucleation of QDs. Structural effects of annealing times and temperatures on the strain-relaxed In(x)Ga(1-x)As/GaAs and the subsequent spatial ordering of the QDs were analyzed by atomic-force microscopy and transmission electron microscopy. Continuous-wave spectral and time-resolved photoluminescence (PL) measurements were performed to study the effects, upon optical properties, of increased QD positional ordering, increased QD uniformity, and proximity of QDs to arrays of dislocations. PL spectral peaks of ordered QD structures formed on strain-relaxed In(x)Ga(1-x)As/GaAs layers were found to be narrower than those of structures not so formed and ordered. Rise and decay times of time-resolved PL were found to be lower at lower temperatures -- apparently as a consequence of decreased carrier-transport times within the barriers surrounding the QDs.

Leon, Rose↗
DOE OSTI2021

Tandem Catalytic Antioxidant Nanoparticles Comprising Cerium Carbonate and Photoactive Metal Oxides

While photoactive metal oxides such as TiO 2 find widespread use in paints and coatings as well as cosmetics and suncare products, they also generate reactive oxygen species (ROS), which degrade materials and are associated with human-health pathologies. Here, we demonstrate a robust and potent catalytic antioxidant consisting of earth-abundant cerium carbonate nanoparticles and micron-size Ce 2 (CO 3 ) 3 . 8H 2 O, which are characterized by powder X-ray diffraction and scanning nanobeam electron diffraction. When dispersed with photoactive metal oxides, these cerium carbonate catalysts decrease the photodecomposition rate of organic dyes and commercial pigment colorants in aqueous media by up to 820-fold, as well as in acrylic coatings. X-ray photoelectron spectroscopy and kinetic experiments support the same tandem catalysis mechanism of photoprotection when using both micron-size Ce 2 (CO 3 ) 3 . 8H 2 O and cerium carbonate nanoparticles. This mechanism involves ROS disproportionation (catalyzed by cerium carbonate) and H 2 O 2 decomposition (partially catalyzed by TiO 2 ) pathways, both of which cerium carbonate also catalyzes on its own, crudely mimicking the function of the cascade system of superoxide dismutase and catalase enzymes. When cerium carbonate nanoparticles were dispersed at 2 wt % in polymethylmethacrylate, the transparency of the polymer film was preserved and the photo-oxidative degradation of the polymer was prevented following UV irradiation at 254 nm, which otherwise resulted in the loss of optical properties and hydroxylation as characterized by ATR-FTIR spectroscopy, in the control polymer lacking cerium carbonate. Similar observations were made regarding color preservation in paint films comprising dye and insoluble commercial colorant pigments. The material chemistry associated with this photoprotection catalysis is subtle and emphasizes the importance of both Ce(III) and carbonate together, as both CePO 4 and Na 2 CO 3 are inactive. In conclusion, this emphasis is also apparent in comparisons of photoprotection catalysis with previously reported cerium oxide nanoparticles, which are significantly less active compared with Ce 2 (CO 3 ) 3 . 8H 2 O under the same conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

Molecular clouds in the extreme outer galaxy

We present observation of 11 molecular clouds with kinematic Galactocentric distances of 18-28 kpc. The most distant is approximately 10 kpc farther from the Galactic center than any previously known and apparently lies beyond the edge of the optical disk. All are associated with much larger H I concentrations, with typical offsets of approximately 40 pc from the H I peaks. CO observations with the CfA 1.2 m and National Radio Astronomy Observatory (NRAO) 12 m telescopes indicate typical sizes of 20-40 pc, velocity widths of 1-3 km/s, and kinetic temperatures of 10-25 K. They apparently have lower CO luminosities than clouds near the solar circle with similar properties. Some may have associated infrared sources, but owing to the great distances of the clouds, the only general conclusion that can be made about star formation is that stars earlier than B1 are absent. The apparent scarcity of clouds like these indicates that their contribution to the mass of the ISM beyond R = 18 kpc is not significant.

Digel, S.↗
NASA NTRS1998

Black Hole X Ray Nova Outburst with XTE and HST

We obtained multiwavelength coverage of the soft X-ray transient. GRO J1655-40 during its 1996 outburst, using HST (Hubble Space Telescope), RXTE (Rossi X Ray Timing Explorer), CGRO (Compton Gamma Ray Observatory), and ground-based facilities. This outburst was qualitatively different from other SXT (Soft X Ray Telescope) outbursts and from previous outbursts of this source. The onset of hard X-ray activity occurred very slowly, over several months, and was delayed relative to the soft X-ray rise. During this period, the optical fluxes declined steadily. This apparent anticorrelation is not consistent with with the standard disk instability model of SXT outbursts, nor is it expected if the optical output is dominated by reprocessed X-rays, as in persistent low-mass X-ray binaries. Based on the strength of the 2175-A interstellar absorption feature, we constrain the reddening to be E(B - V) = 1.2 plus or minus 0.1, a result which is consistent with the known properties of the source and with the strength of other interstellar absorption lines. After this dereddening we find that the spectra are dominated by a component peaking in the optical, with the expected v (sup l/3) disk spectrum seen only in the ultraviolet. Bowen fluorescence lines of NIII and OIII are also seen, as well as possible P Cyg profiles in the ultraviolet resonance lines. These features suggest an accretion-disk wind. The X-ray spectra broadly resemble the high/soft state commonly seen in black hole candidates, but evolve through two substates.

Patterson, Joseph↗
NASA NTRS2022

The Coronal Veil

Coronal loops, seen in solar coronal images, are believed to represent emission from magneticflux tubes withcompact cross sections. We examine the 3D structure of plasma above an active region in a radiativemagnetohydrodynamic simulation to locate volume counterparts for coronal loops. In many cases, a loop cannot belinked to an individual thin strand in the volume. While many thin loops are present in the synthetic images, thebright structures in the volume are fewer and of complex shape. We demonstrate that this complexity can formimpressions of thin bright loops, even in the absence of thin bright plasma strands. We demonstrate the difficulty ofdiscerning from observations whether a particular loop corresponds to a strand in the volume, or a projectionartifact. We demonstrate how apparently isolated loops could deceive observers, even when observations frommultiple viewing angles are available. While we base our analysis on a simulation, the mainfindings areindependent from a particular simulation setup and illustrate the intrinsic complexity involved in interpretingobservations resulting from line-of-sight integration in an optically thin plasma. We propose alternativeinterpretation for strands seen in Extreme Ultraviolet images of the corona. The“coronal veil”hypothesis ismathematically more generic, and naturally explains properties of loops that are difficult to address otherwise—such as their constant cross section and anomalously high density scale height. We challenge the paradigm ofcoronal loops as thin magneticflux tubes, offering new understanding of solar corona, and by extension, of othermagnetically confined bright hot plasmas

A Malanushenko↗