SEARCH · Engineering Papers

Results for “Analytical Balance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Space Station CMIF extended duration metabolic control test

The Space Station Extended Duration Metabolic Control Test (EMCT) was conducted at the MSFC Core Module Integration Facility. The primary objective of the EMCT was to gather performance data from a partially-closed regenerative Environmental Control and Life Support (ECLS) system functioning under steady-state conditions. Included is a description of the EMCT configuration, a summary of events, a discussion of anomalies that occurred during the test, and detailed results and analysis from individual measurements of water and gas samples taken during the test. A comparison of the physical, chemical, and microbiological methods used in the post test laboratory analyses of the water samples is included. The preprototype ECLS hardware used in the test, providing an overall process description and theory of operation for each hardware item. Analytical results pertaining to a system level mass balance and selected system power estimates are also included.

Schunk, Richard G.↗

NASA NTRS1954

Analytical Determination of the Mechanism of an Airplane Spin Recovery with Different Applied Yawing Moments by Use of Rotary-balance Data

Explore the source record for details and available documents.

Burk, Sanger M , Jr↗

NASA NTRS1995

Affect of Brush Seals on Wave Rotor Performance Assessed

The NASA Lewis Research Center's experimental and theoretical research shows that wave rotor topping can significantly enhance gas turbine engine performance levels. Engine-specific fuel consumption and specific power are potentially enhanced by 15 and 20 percent, respectively, in small (e.g., 400 to 700 hp) and intermediate (e.g., 3000 to 5000 hp) turboshaft engines. Furthermore, there is potential for a 3- to 6-percent specific fuel consumption enhancement in large (e.g., 80,000 to 100,000 lbf) turbofan engines. This wave-rotor-enhanced engine performance is accomplished within current material-limited temperature constraints. The completed first phase of experimental testing involved a three-port wave rotor cycle in which medium total pressure inlet air was divided into two outlet streams, one of higher total pressure and one of lower total pressure. The experiment successfully provided the data needed to characterize viscous, partial admission, and leakage loss mechanisms. Statistical analysis indicated that wave rotor product efficiency decreases linearly with the rotor to end-wall gap, the square of the friction factor, and the square of the passage of nondimensional opening time. Brush seals were installed to further minimize rotor passage-to-cavity leakage. The graph shows the effect of brush seals on wave rotor product efficiency. For the second-phase experiment, which involves a four-port wave rotor cycle in which heat is added to the Brayton cycle in an external burner, a one-dimensional design/analysis code is used in conjunction with a wave rotor performance optimization scheme and a two-dimensional Navier-Stokes code. The purpose of the four-port experiment is to demonstrate and validate the numerically predicted four-port pressure ratio versus temperature ratio at pressures and temperatures lower than those that would be encountered in a future wave rotor/demonstrator engine test. Lewis and the Allison Engine Company are collaborating to investigate wave rotor integration in an existing turboshaft engine. Recent theoretical efforts include simulating wave rotor dynamics (e.g., startup and load-change transient analysis), modifying the one-dimensional wave rotor code to simulate combustion internal to the wave rotor, and developing an analytical wave rotor design/analysis tool based on macroscopic balances for parametric wave rotor/engine analysis.

Source record↗

NASA NTRSDate not supplied

The Nasa Multiscale Analysis Tool: an Enabling Platform for Achieving Vision 2040

Vision 2040 is a community-driven consensus document, written in 2018, aimed at defining the potential 25-year future state required for performing integrated multiscale modeling of materials and systems for future aerospace and aeronautical applications. Nine Vision Key Elements (KEs) were defined along with associated technical gaps. This paper will address current NASA GRC research efforts utilizing the NASA Multiscale Analysis Tool (NASMAT). This paper will specifically focus on NASMAT’s ability to address gaps in three of the nine Vision 2040 KEs: 1) Models and Methods, 2) Multiscale Measurements and Characterization Tools and Methods, and 6) Data, Informatics, and Visualization. NASMAT is a versatile platform for performing computationally efficient multiscale analyses of heterogeneous materials. NASMAT offers the user flexibility to define an arbitrary number of length scales (levels) where a variety of micromechanics theories can be implemented at each level. Micromechanics theories can be selected to balance accuracy and computational efficiency and range from analytical (Mori-Tanaka) to several semi-analytical (method of cells) formulations. NASMAT can also be coupled with external software and used to perform multiscale analyses of more complex structures. The paper will include a recent application of NASMAT to model a complex, three-dimensional woven composite, with a particular emphasis placed on multiscale measurements utilized to enhance the quality of the multiscale analysis. Since typical NASMAT analyses can be completed in on the order of seconds to minutes, a second example will demonstrate NASMAT’s ability to generate large quantities of data useful for sensitivity analysis, uncertainty quantification, or machine learning applications. Current progress on developing multiscale data visualization tools will also be addressed along with the challenges associated with and proposed solutions for sifting through large amounts of data. These examples will demonstrate that NASMAT is an enabling platform for achieving the goals in Vision 2040.

Vision 2040↗

NASA NTRS2023

An Enabling Platform for Achieving Multiscale Multiphysics Analysis of Multiphase Materials

This paper will address current NASA GRC research efforts utilizing the NASA Multiscale Analysis Tool (NASMAT) which address technical gaps in three of the Vision 2040 key discipline areas. NASMAT is a versatile platform for performing computationally efficient multiscale analyses of heterogeneous materials and is available free through the NASA software catalog. It offers the user flexibility to define an arbitrary number of length scales (levels) where a variety of micromechanics theories can be implemented at each level. Micromechanics theories can be selected to balance accuracy and computational efficiency and range from analytical (Mori-Tanaka) to several semi-analytical (method of cells) formulations. The resulting anisotropic, evolving nonlinear, thermomechanical constitutive model can also be coupled with external software and used to perform multiscale analyses of more complex structures. A recent application to model a complex, three-dimensional woven composite, with a particular emphasis placed on multiscale measurements utilized to enhance the quality of the multiscale analysis will be discussed. Since typical NASMAT analyses can be completed on the order of seconds to minutes, a second example will demonstrate the ability to generate large quantities of data useful for sensitivity analysis, uncertainty quantification, or machine learning applications. Current progress on implementing NASMAT within a multiscale digital thread/digital twin framework will also be addressed. These examples will demonstrate that NASMAT is an enabling platform for achieving the goals in Vision 2040.

Multiscale↗

DOE OSTI2020

Multi-scale dynamics of magnetic flux tubes and inverse magnetic energy transfer

Here, we report on an analytical and numerical study of the dynamics of a three-dimensional array of identical magnetic flux tubes in the reduced-magnetohydrodynamic description of the plasma. We propose that the long-time evolution of this system is dictated by flux-tube mergers, and that such mergers are dynamically constrained by the conservation of the pertinent (ideal) invariants, viz. the magnetic potential and axial fluxes of each tube. We also propose that in the direction perpendicular to the merging plane, flux tubes evolve in a critically balanced fashion. These notions allow us to construct an analytical model for how quantities such as the magnetic energy and the energy-containing scale evolve as functions of time. Of particular importance is the conclusion that, like its two-dimensional counterpart, this system exhibits an inverse transfer of magnetic energy that terminates only at the system scale. We perform direct numerical simulations that confirm these predictions and reveal other interesting aspects of the evolution of the system. We find, for example, that the early time evolution is characterized by a sharp decay of the initial magnetic energy, which we attribute to the ubiquitous formation of current sheets. We also show that a quantitatively similar inverse transfer of magnetic energy is observed when the initial condition is a random, small-scale magnetic seed field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Quantifying local and global mass balance errors in physics-informed neural networks

Physics-informed neural networks (PINN) have recently become attractive for solving partial differential equations (PDEs) that describe physics laws. By including PDE-based loss functions, physics laws such as mass balance are enforced softly in PINN. This paper investigates how mass balance constraints are satisfied when PINN is used to solve the resulting PDEs. We investigate PINN’s ability to solve the 1D saturated groundwater flow equations (diffusion equations) for homogeneous and heterogeneous media and evaluate the local and global mass balance errors. We compare the obtained PINN’s solution and associated mass balance errors against a two-point finite volume numerical method and the corresponding analytical solution. We also evaluate the accuracy of PINN in solving the 1D saturated groundwater flow equation with and without incorporating hydraulic heads as training data. We demonstrate that PINN’s local and global mass balance errors are significant compared to the finite volume approach. Tuning the PINN’s hyperparameters, such as the number of collocation points, training data, hidden layers, nodes, epochs, and learning rate, did not improve the solution accuracy or the mass balance errors compared to the finite volume solution. Mass balance errors could considerably challenge the utility of PINN in applications where ensuring compliance with physical and mathematical properties is crucial.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Deciphering Catalyst–Support Interaction via Doping for Highly Active and Durable Oxygen Evolution Catalysis

The design of oxygen evolution reaction (OER) electrocatalysts demands a delicate balance between activity and stability. Here, in this study, we present a rational design approach that leverages catalyst-support interactions to enhance both the intrinsic activity and durability of Ir-based catalysts. Our study reveals that while Mo doping energetically promotes the formation of high-valent Ir species, enhancing intrinsic catalytic activity, it also leads to a reduction in electrical conductivity. These findings emphasize that supporting doping can introduce both beneficial and limiting effects, highlighting the need for a carefully balanced design strategy to optimize the overall OER performance. Simultaneously, in situ analytical techniques and comparative evaluation reveal the crucial role of oxide supports in stabilizing the catalyst. These findings highlight the pivotal role of interface engineering in maintaining catalyst integrity and the need for support materials that balance dopant-driven electronic promotion with structural and electrochemical robustness. These interconnected degradation pathways highlight the need to move beyond a catalyst-centric view and instead adopt a system-level understanding of the stability. Our approach offers a strong foundation for the rational design and evaluation of high-performance OER electrocatalysts for electrochemical energy applications.

Kim, Jinyeop [Korea Advanced Inst. Science and Tec↗

DOE OSTI2023

Circuit-level design principles for transmission-mode microwave impedance microscopy

A recently developed technique of transmission-mode microwave impedance microscopy (T-MIM) has greatly extended the capabilities of standard reflection-mode MIM to novel applications, such as the in operando study of nanoscale electro-acoustic devices. As is common for new techniques, systematic design principles for boosting sensitivity and balancing bandwidth are lacking. Here, we show numerically and analytically that the T-MIM signal is proportional to the reflection-mode voltage enhancement factor η of the circuit, as long as the output impedance of the local voltage source is properly treated. We show that this proportionality holds in the currently achievable “weak sampling” regime and beyond, for which we demonstrate a realistic path with commercially available superconducting components and critically coupled impedance matching networks. Furthermore, we demonstrate that for these next-generation designs, the sensitivity is generally maximized at a slightly different frequency from the unloaded S 11 resonance, which can be explained by the maximum power transfer theorem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1973

Self-acting and hydrodynamic shaft seals

Self-acting and hydrodynamic seals are described. The analytical procedures are outlined for obtaining a seal force balance and the operating film thickness. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis revealed three different vibration modes. Proposed applications of self-acting seals in gas turbine engines and in rocket vehicle turbopumps are described. Also experimental data on self-acting face seals operating under simulated gas turbine conditions are given; these data show the feasibility of operating the seal at conditions of 345 newtons per square centimeter (500 psi) and 152 meters per second (500 ft/sec) sliding speed.

Ludwig, L. P.↗

NASA NTRS1973

Self-acting and hydrodynamic shaft seals.

Ludwig, L. P.↗

NASA NTRS1980

Energy-balance climate models

An introductory survey of the global energy balance climate models is presented with an emphasis on analytical results. A sequence of increasingly complicated models involving ice cap and radiative feedback processes are solved and the solutions and parameter sensitivities are studied. The model parameterizations are examined critically in light of many current uncertainties. A simple seasonal model is used to study the effects of changes in orbital elements on the temperature field. A linear stability theorem and a complete nonlinear stability analysis for the models are developed. Analytical solutions are also obtained for the linearized models driven by stochastic forcing elements. In this context the relation between natural fluctuation statistics and climate sensitivity is stressed.

North, G. R.↗

NASA NTRS1981

Energy balance climate models

An introductory survey of the global energy balance climate models is presented with an emphasis on analytical results. A sequence of increasingly complicated models involving ice cap and radiative feedback processes are solved, and the solutions and parameter sensitivities are studied. The model parameterizations are examined critically in light of many current uncertainties. A simple seasonal model is used to study the effects of changes in orbital elements on the temperature field. A linear stability theorem and a complete nonlinear stability analysis for the models are developed. Analytical solutions are also obtained for the linearized models driven by stochastic forcing elements. In this context the relation between natural fluctuation statistics and climate sensitivity is stressed.

North, G. R.↗

NASA NTRS1990

Theoretical models of gas dynamics and star formation in interacting ring galaxies

A series of one and two dimensional hydrodynamic simulations of a ring wave in interstellar gas disks was completed. These calculations included nonlinear source terms to model the effects of interstellar interactions and star formation, as well as the spatial-temporal gas flow. Toomre's kinematical model was merged with the Arnold, Shandarin, and Zeldovich 'pancake' theory of caustics in galaxy formation. The resulting theory can describe almost all the structure in restricted three-body simulations of single-pass collisions, even with multi-component potentials. Off-center galactic collisions were studied to understand the dynamics involved. Multi-color optical and near-infrared observations of faint tidal features were performed in about two dozen interacting galaxies selected from the Arp atlas. This sample provided evidence for ongoing star formation in tidal structures, and even enhancements of star formation in some cases. The task of assembling the data for gas-rich, late-type galaxies, was undertaken to see if a more coherent picture of the gas distribution would emerge from the more complete data. Analytic solutions of the equations with subsonic flows to balance gas consumption for expulsion form a galactic fountain were also derived.

Struck-Marcell, Curtis↗

NASA NTRS2011

Formation of the Aerosol of Space Origin in Earth's Atmosphere

The problem of formation of the aerosol of space origin in Earth s atmosphere is examined. Meteoroids of the mass range of 10-18-10-8 g are considered as a source of its origin. The lower bound of the mass range is chosen according to the data presented in literature, the upper bound is determined in accordance with the theory of Whipple s micrometeorites. Basing on the classical equations of deceleration and heating for small meteor bodies we have determined the maximal temperatures of the particles, and altitudes at which they reach critically low velocities, which can be called as velocities of stopping . As a condition for the transformation of a space particle into an aerosol one we have used the condition of non-reaching melting temperature of the meteoroid. The simplified equation of deceleration without earth gravity and barometric formula for the atmosphere density are used. In the equation of heat balance the energy loss for heating is neglected. The analytical solution of the simplified equations is used for the analysis.

Kozak, P. M.↗

DOE OSTI2023

Extended Low Load Boiler Operation to Improve Performance and Economics of an Existing Coal Fired Power Plant (Final Report)

The overall goal is to improve the performance and economics of existing coal fired power plants by extending low load boiler operation to lower loads than is currently achievable. The objective of this program is to develop and validate sensor hardware and analytical algorithms to lower plant operating expenses (OPEX) for the currently operating pulverized coal utility boiler fleet. Coal fired utility boilers are increasingly under grid dispatch pressure. In some cases, the coal fired cost of generation is noncompetitive with respect to natural gas generation and subsidized renewable sources. To remain profitable and remain fully compliant with existing environmental regulations, the installed coal fired fleet must find technologies which allow it to move into a more flexible cyclic load dispatch model. Today the installed coal fired utility fleet must be cost of generation competitive, fully emissions compliant, and responsive to the variability inherent in renewable energy generation sources. In the Phase I of the project, GE Steam Power, Inc. (GE) performed modeling of different operating scenarios for low load operation using an existing full plant dynamic model developed for a 660MW steam power plant. Sensors and analytic algorithms to enable a stable and steady coal supply for low load pulverizer operation were identified and tested at the Pulverizer Development Facility (PDF) at GE’s Clean Energy Center in Bloomfield, Connecticut. Sensors and analytic algorithms to enable stable combustion for low load operation were identified and tested at the 15 MWth Industrial Scale Burner facility (ISBF) at GE’s Clean Energy Center. A concept was developed to test the sensors and control algorithms, down selected after testing, at a full-scale coal fired power plant. A budget estimate was then developed, and the concept was implemented at an existing utility power plant. The specific objectives of the experimental work were to: • Identify and select sensors and analytic algorithms for monitoring coal pulverizer operation at lower loads to provide stable operation and appropriate coal fineness at lower coal throughput; Identify and select sensors and analytic algorithms for a Boiler Flame Stability Monitor to better balance air and fuel at each burner. This enables a reduction in a coal boiler’s safe low load power level while maintaining stable flame characteristics; Develop a concept in Phase I for low load operation of a full-scale power plant and develop a budget estimate for testing and execute the test plan at an existing plant in Phase II; Validate the capability of the extended low load boiler system to extend the minimum load operating point in a safe and reliable manner on an existing full-scale utility boiler. At the completion of this experimental study, GE has developed a set of sensors and analytic algorithms, down selected after testing, that have the potential to enable safe low load operation of a utility boiler. GE has also identified a host site for testing these identified sensors and analytic algorithms. GE has generated a full set of deliverables that provide sufficient information to proceed with the next step of testing at a host site. This includes a potential host site and budget estimate for concept testing at host site. In the Phase II of the project, a series of field tests were completed to validate the extended low load boiler operation, which consisted of detailed engineering, installation, commissioning, and testing the additional sensors and analytics for the coal-fired combustion system on an existing full-scale utility boiler. The optimization work has been supported by the host plant and endorsed by their engineering and operation staff.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2021

Overall equilibrium in the coupling of peridynamics and classical continuum mechanics

Coupling peridynamics based computational tools with those using classical continuum mechanics can be very beneficial, because it can provide a means to generate a computational method that combines the efficiency of classical continuum mechanics with the capability to simulate crack propagation, typical of peridynamics. This paper presents an overlooked issue in this type of coupled computational methods: the lack of overall equilibrium. This can be the case even if the coupling strategy satisfies the usual numerical tests involving rigid body motions as well as uniform and linear strain distributions. We focus our investigation on the lack of overall equilibrium in an approach to couple peridynamics and classical continuum mechanics recently proposed by the authors. In our examples, the magnitude of the out-of-balance forces is a fraction of a percent of the applied forces, but it cannot be assumed to be a numerical round-off error. We show analytically and numerically that the main reason for the existence of out-of-balance forces is a lack of balance between the local and nonlocal tractions at the coupling interface. This usually results from the presence of high-order derivatives of displacements in the coupling zone.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Methods for Carbon Mass Closure in Polyolefin Hydrocracking

Heterogeneous catalytic hydrocracking of polyolefins is a promising approach for the processing of postconsumer plastics, but product quantification methods remain inconsistent across the literature. In systems that generate a large fraction of vapor-phase products, typical product capture methods can result in large carbon balance deficits, exceeding 50%, compromising reported yields and selectivities. Here, we identify the major sources of product loss and develop enhanced capture methods to improve the quantification accuracy. Seven supplemental techniques were evaluated, targeting either increased vapor recovery (by increasing the volatility or system volume) or enhanced retention in the liquid phase (by decreasing volatility). Among these, a flow collection approach using a continuous helium sweep and downstream gas sampling bag capture yielded the highest recovery, achieving a 96 ± 9.2% carbon balance closure. We show that the efficacy of these methods is strongly dependent on product distribution. In general, solvent addition was most effective when condensable species dominate the product distribution, while flow collection was preferred when both condensable species and light gases are present in high concentrations. These results highlight the need for method-specific workup strategies and demonstrate that no single protocol is universally optimal. We provide general guidelines for selecting and implementing robust product capture techniques, enabling accurate yield and selectivity determinations in polyolefin hydrocracking systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗