Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Algae”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Soil sealing by algae: An alternative to plastic pond liners for outdoor algal cultivation

Commercial production of algal biofuels is currently limited by high capital costs, particularly costs of synthetic pond liners that minimize seepage of cultivation fluids, salts, and nutrients into the subsurface beneath outdoor algae cultivation facilities. Even some profitable nutraceutical companies bear the high costs of pond liners. However, studies of animal waste holding ponds and aquaculture facilities have shown that underlying soils can effectively “self-seal”, potentially eliminating the need for plastic liners. Here, we explored the potential for self-sealing with algae to provide an alternative to synthetic pond liners in unlined algae cultivation ponds. Laboratory-scale soil column experiments were used to investigate soil clogging by algae, a topic rarely discussed in the literature. Columns composed of fine sand, loamy sand, and loam soil displayed reductions in saturated hydraulic conductivity of the entire soil column of up to two orders of magnitude in response to infiltration by the alga Scenedesmus dimorphus suspended in algal culture nutrient solution at a density of 5 × 10 8 cells L –1 . Scanning electron microscope imaging showed a dense algal layer on the surface of each soil column, thickly coating mineral grains with algal material and filling pore spaces. The algal coating was absent in samples at >3 cm depth in the soil columns, and measurements of chlorophyll content also confirmed that algal cells were mostly confined to the soil surface. In this study, the application of an algal suspension contributed significantly to soil sealing. In conclusion, this new application of biological sealing technology should be studied further to determine its utility and durability as an alternative to plastic liners, perhaps in conjunction with soil compaction to achieve hydraulic conductivities beneath algal production ponds that are protective of groundwater quality.

59 BASIC BIOLOGICAL SCIENCES↗

Dietary transfer of zinc oxide particles from algae (Scenedesmus obliquus) to daphnia (Ceriodaphnia dubia)

Highlights: • Toxicity of ZnO particles on algae and daphnia through dietary transfer was not more in 50 nm ZnO. • Contribution of ZnO {sub (total)} on toxicity was higher than ZnO {sub (ion)} through dietary transfer. • Biomagnification (BMF) ZnO particles was observed from algae to daphnia. • Uptake and accumulation particles caused significant ultra-structural damages in daphnia. The rapid increase in production and usage of ZnO particles in recent years has instigated the concerns regarding their plausible effects on the environment. Current study explores the trophic transfer potential of ZnO particles of different sizes (50, 100 nm and bulk particles) from algae (Scenedesmus obliquus) to daphnia (Ceriodaphnia dubia) and the contribution of ZnO{sub (ions)} (effect of dissolved Zn ions that remain in test medium after separation NPs) to the overall toxicity of ZnO{sub (total)} (impact of both particle and dissolved Zn ions). Toxicity and uptake of ZnO{sub (total)} and ZnO{sub (ions)} in algae were found to be dependent on the concentration and particle size. Feeding of Zn accumulated algae (517 ± 28, 354.7 ± 61 and 291 ± 20 µg/g dry wt.) post-exposure to 61 µM of ZnO{sub (total)} of 50, 100 nm and bulk ZnO particles caused a significant decrease in the survival (15–20%) of daphnia. A significant amount of Zn accumulation was observed in daphnia even after the 48 h depuration period. Biomagnification factor was found to be nearly 1 for all the sizes of ZnO particles tested. For 50 nm ZnO, the BMF was higher when compared to other two sizes, reaching the mean value of 1.06 ± 0.01 at 61 µM. Further analysis revealed that the dietary uptake of different sizes of ZnO particles caused ultra-structural damages and degradation of internal organs in daphnia.

54 ENVIRONMENTAL SCIENCES↗

Controllable Phycobilin Modification: An Alternative Photoacclimation Response in Cryptophyte Algae

Cryptophyte algae are well-known for their ability to survive under low light conditions using their auxiliary light harvesting antennas, phycobiliproteins. Mainly acting to absorb light where chlorophyll cannot (500-650 nm), phycobiliproteins also play an instrumental role in helping cryptophyte algae respond to changes in light intensity through the process of photoacclimation. Until recently, photoacclimation in cryptophyte algae was only observed as a change in the cellular concentration of phycobiliproteins; however, an additional photoacclimation response was recently discovered that causes shifts in the phycobiliprotein absorbance peaks following growth under red, blue, or green light. Here, we reproduce this newly identified photoacclimation response in two species of cryptophyte algae and elucidate the origin of the response on the protein level. We compare isolated native and photoacclimated phycobiliproteins for these two species using spectroscopy and mass spectrometry, and we report the X-ray structures of each phycobiliprotein and the corresponding photoacclimated complex. We find that neither the protein sequences nor the protein structures are modified by photoacclimation. We conclude that cryptophyte algae change one chromophore in the phycobiliprotein β subunits in response to changes in the spectral quality of light. Ultrafast pump-probe spectroscopy shows that the energy transfer is weakly affected by photoacclimation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Algae Production from Wastewater Resources: An Engineering and Cost Analysis

Co-locating algae cultivation ponds near municipal wastewater (MWW) facilities provides the opportunity to make use of the nitrogen and phosphorus compounds in the wastewater as nutrient sources for the algae. This use benefits MWW facilities, the algae biomass and biofuel or bioproduct industry, and the users of streams where treated or untreated waste would be discharged. Nutrient compounds can lead to eutrophication, hypoxia, and adverse effects to some organisms if released downstream. This analysis presents an estimate of the cost savings made possible to cultivation facilities by using the nutrients from wastewater for algae growth rather than purchase of the nutrients. The analysis takes into consideration the cost of pipe transport from the wastewater facility to the algae ponds, a cost factor that has not been publicly documented in the past. The results show that the savings in nutrient costs can support a wastewater transport distance up to 10 miles for a 1000-acre-pond facility, with potential adjustments for different operating assumptions.

09 BIOMASS FUELS↗

Whole Algae Hydrothermal Liquefaction and Upgrading: A review of progress and challenges and insight into the future

This report summarizes the research at Pacific Northwest National Laboratory (PNNL) to evaluate the economic viability and environmental impact of using microalgae to produce fuels and other products via hydrothermal liquefaction (HTL). Over the past several years, PNNL has examined key aspects of feedstock cost and availability, formatting and conversion techniques, and the utilization of all HTL products. Investigations of feedstock cost led to opportunities to work with cost-advantaged algal feedstocks that can be provided at minimal cost for HTL processing. Cost-advantaged algae include wastewater-grown algae and harvested algal blooms. Although farm-cultivated algae offer the best possible biomass composition and scalability for HTL processing, the cost of the feedstock is too high to yield an economically competitive biofuel. Processing cost-advantaged feedstocks creates other unique challenges in adapting HTL to upgrade biomass with higher than typical ash content and less preferred composition (low lipid). Despite the challenges, HTL of cost-advantaged algae results in economically competitive pricing scenarios and significant advantages in reducing net emissions below 70% of the petroleum baseline. The utilization of a variety of potential non-fuel products from algal HTL, such as the use of HTL solids as a cement additive, provides a significant reduction in net emissions by offsetting emissions from other carbon-intense products. This report presents an analysis of the research conducted at PNNL to develop an economically and environmentally beneficial process for algae HTL.

09 BIOMASS FUELS↗

Micromundos biominerales en las algas rojas

Coralline algae (rhodophyta) populate vast pinkish colour regions of the coast. If you step on them in your bare feet, they might hurt you, because they are hard and sharp. Many organisms find shelter and develop within their tiny branches. Photosynthesis of coralline algae conducts the formation of carbonates that exhibit a fascinating architecture. The alga and its associated microorganisms (microbiota) participate in the formation of these minerals, that accumulate and cement the materials that ultimately shape beaches and coastal lines. Carbonates are susceptible to acid-base chemistry; thus, their structural stability and their dissolution depend on the pH of the surrounding environment. Therefore, these biominerals and the marine organisms that build them (such as algae, corals, mollusks or equinoderms) are vulnerable to ocean acidification. By trying to see beyond our eyesight, we were able to understand that algal branches hide an amazing structural strength, where its microstructure and chemistry play a major role. We found minerals with a vast structural and thermal stability in the algal body, named algal thallus. Currently, basic science explores coralline red and green algae as interesting models to understand carbon sequestration in stable structures. Therefore, this research might inspire the development of technologies to mitigate climate change.

59 BASIC BIOLOGICAL SCIENCES↗

System for algae-based treatment of water

The inventive technology relates to methods for the algae-based treatment of challenged water. Embodiments of the inventive technology include methods for commercially scalable algal-growth in challenged water. Such methods include, for example a step-wise conditioning process to select and condition algae strains for high growth yields in the presence of challenged water generated from the production of oil and gas or other waste water sources. Such algae-based treatment, in addition to removing harmful chemical compounds from this water may also capture and sequester heavy metal contaminants as well as other compounds for later extraction and processing. The invention also may include embodiments for an algae based desalination system of challenged water, resulting in the production of brine salts and the like. The inventive technology also encompasses an algae-based system to capture and sequester carbon-dioxide from gas and other emissions generated from industrial sources.

Laur, Paul↗

Understanding the Contribution of Upstream CO2 Sources to the Total Life Cycle Impacts of Algae Biofuels

This work was presented at the TechConnect Conference in Boston, MA on June 17, 2019. NETL is evaluating the environmental life cycle impacts of algae biofuels synthesized using CO2 from five types of thermoelectric power plants. The power plants considered in the analysis are (1) Subcritical Pulverized Coal-fired Power Plant (SubPC), (2) Supercritical Pulverized Coal-fired Power (SCPC), (3) Solid Oxide Fuel Cell Power Plant (SOFC), (4) Oxycombustion Pulverized Coal Plant (OxyPC), and (5) NGCC to model algae biofuel pathways. Both flue gas and captured (amine-based solvent) CO2 scenarios are considered. Algae-to-biofuel conversion is modeled via Combined Algae Processing (CAP) and Hydrothermal Liquefaction (HTL) pathways with the algae cultivation in open raceway ponds (ORPs) and photobioreactors (PBRs).

Krynock, Michelle↗

Biological and algae harvesting and cultivation systems and methods

Algae harvesting and cultivating systems and methods for producing high concentrations of algae product with minimal energy. In an embodiment, an algae harvesting method is provided for performing dead-end filtration in an algae harvesting system having at least one treatment tank defining a plurality of filtration stages including at least a first filtration stage and a second filtration stage. An algae medium is pulled through the hollow fiber membranes such that a retentate and a permeate are produced.

Hazlebeck, David A.↗

Hydrothermal but Not Mechanical Pretreatment of Wastewater Algae Enhanced Anaerobic Digestion Energy Balance due to Improved Biomass Disintegration and Methane Production Kinetics

This study used pilot-scale high-rate algae ponds to assess algal–bacteria biomass productivity and wastewater nutrient removal as well as the impact of mechanical and hydrothermal pretreatments on biomass disintegration, methane production kinetics, and anaerobic digestion (AD) energy balance. Mechanical pretreatment had a minor effect on biomass disintegration and methane production. By contrast, hydrothermal pretreatment significantly reduced particle size and increased the solubilized organic matter content by 3.5 times. The methane yield and production rate increased by 20–55% and 20–85%, respectively, with the highest values achieved after pretreatment at 121 °C for 60 min. While the 1st-order and pseudo-1st-order reaction equation models fitted methane production from untreated biomass best (R2 > 0.993), the modified Gompertz sigmoidal-type model provided a superior fit for hydrothermally pretreated algae (R2 ≥ 0.99). The AD energy balance revealed that hydrothermal pretreatment improved the total energy output by 25–40%, with the highest values for volume-specific and mass-specific total energy outputs reaching 0.23 kW per digester m3 and 2.3 MW per ton of biomass volatile solids. Additionally, net energy recovery (energy output per biomass HHV) increased from 20% for untreated algae to 32–34% for hydrothermally pretreated algae, resulting in net energy ratio and net energy efficiency of 2.14 and 68%, respectively.

09 BIOMASS FUELS↗

Integrating Algae with Bioenergy Carbon Capture and Storage (ABECCS) Increases Sustainability

Abstract Bioenergy carbon capture and storage (BECCS) has been proposed to reduce atmospheric CO 2 concentrations, but concerns remain about competition for arable land and freshwater. The synergistic integration of algae production, which does not require arable land or freshwater, with BECCS (called “ABECCS”) can reduce CO 2 emissions without competing with agriculture. This study presents a technoeconomic and life‐cycle assessment for colocating a 121‐ha algae facility with a 2,680‐ha eucalyptus forest for BECCS. The eucalyptus biomass fuels combined heat and power (CHP) generation with subsequent amine‐based carbon capture and storage (CCS). A portion of the captured CO 2 is used for growing algae and the remainder is sequestered. Biomass combustion supplies CO 2 , heat, and electricity, thus increasing the range of sites suitable for algae cultivation. Economic, energetic, and environmental impacts are considered. The system yields as much protein as soybeans while generating 61.5 TJ of electricity and sequestering 29,600 t of CO 2 per year. More energy is generated than consumed and the freshwater footprint is roughly equal to that for soybeans. Financial break‐even is achieved for product value combinations that include 1) algal biomass sold for $1,400/t (fishmeal replacement) with a $68/t carbon credit and 2) algal biomass sold for $600/t (soymeal replacement) with a $278/t carbon credit. Sensitivity analysis shows significant reductions to the cost of carbon sequestration are possible. The ABECCS system represents a unique technology for negative emissions without reducing protein production or increasing water demand, and should therefore be included in the suite of technologies being considered to address global sustainability.

09 BIOMASS FUELS↗

Real-time monitoring and prediction of water quality parameters and algae concentrations using microbial potentiometric sensor signals and machine learning tools

We report the overarching hypothesis of this study was that temporal microbial potentiometric sensor (MPS) signal patterns could be used to predict changes in commonly monitored water quality parameters by using artificial intelligence/machine learning tools. To test this hypothesis, the study first examines a proof of concept by correlating between MPS's signals and high algae concentrations in an algal cultivation pond. Then, the study expanded upon these findings and examined if multiple water quality parameters could be predicted in real surface waters, like irrigation canals. Signals generated between the MPS sensors and other water quality sensors maintained by an Arizona utility company, including algae and chlorophyll, were collected in real time at time intervals of 30 min over a period of 9 months. Data from the MPS system and data collected by the utility company were used to train the ML/AI algorithms and compare the predicted with actual water quality parameters and algae concentrations. Based on the composite signal obtained from the MPS, the ML/AI was used to predict the canal surface water's turbidity, conductivity, chlorophyll, and blue-green algae (BGA), dissolved oxygen (DO), and pH, and predicted values were compared to the measured values. Initial testing in the algal cultivation pond revealed a strong linear correlation (R 2 = 0.87) between mixed liquor suspended solids (MLSS) and the MPSs' composite signals. The Normalized Root Mean Square Error (NRMSE) between the predicted values and measured values were <6.5%, except for the DO, which was 10.45%. The results demonstrate the usefulness of MPSs to predict key surface water quality parameters through a single composite signal, when the ML/AI tools are used conjunctively to disaggregate these signal components. The maintenance-free MPS offers a novel and cost-effective approach to monitor numerous water quality parameters at once with relatively high accuracy.

54 ENVIRONMENTAL SCIENCES↗

Utilizing geothermal heat for hydrothermal liquefaction of algae

The distribution of utilizable geothermal reservoirs in the US is concentrated in areas of low population density. In order to increase the scale of geothermal operations, we proposed to develop a modular biofuel production facility that directly uses geothermal heat. By transforming geothermal heat to chemical potential energy (rather than electricity), the scale of existing or new geothermal operations can be increased and distributed to areas of higher population density. Simultaneously, the economics of producing biocrude oil is improved significantly where geothermal heat is used, instead of natural gas-fired systems for providing heat and power. In the Phase I project, we demonstrated that it was economically feasible to sustainably produce a biofuel by integrating geothermal heat. It was found that, for the best case scenario at a scale of 10T(biomass)/hr, it was possible to produce a biofuel for $0.26/L, as compared to crude oil at $0.3/L (current selling price). Ultimately this demonstrates that this technology can be economically sustainable when integrated with geothermal heat. We also demonstrated that the addition of modular biofuel-production technologies can be more profitable for a geothermal plant operator. For 1000kg/day scale, it was found that it could be 2.5 times more profitable for a geothermal plant operator to sell bio-oil rather than electricity (with a waste source within 20 miles of the processing facility). Furthermore, as the design of the proposed technology recycles significant heat, requiring between 5% and 20% of the total heat load of the biofuel process to be supplied by the geothermal plant, it is feasible for an operator to initially implement the technology at small scale (i.e. less than 100gal/day) with the plans of scaling up operations in the future. Implementing the technology incrementally may minimize initial the investment and financial risk for the operator. Finally, in the Phase I project, we built and tested a hydrothermal system developed at ARI. We tested three different feedstock types, pure algae feed, algae mixed with manure, and algae with in-situ catalysts (molybdenum trioxide), over a range of temperatures and residence times. In terms of oil products, our results (yield, process times and elemental balance) were similar to what was obtained at PNNL. As such our experiments matched well with the techno-economic design (mass throughput specifications), and will thus well inform the Phase II process design. The experimental data obtained on the hydrothermal treatment of algae indicated that the highest recovery of oil occurred at 250°C. This shows that HTL can be carried out 100°C lower than what is currently considered ‘state of the art’, and thus save significant energy savings. Further, it was found that oil-recovered fractions had lower amounts of nitrogen at lower temperatures, indicating that oil produced at 250°C is of higher quality than if we were to produce fuel at 350°C.

09 BIOMASS FUELS↗

Federal Activities Report on the Bioeconomy: Algae

The Algae Interagency Working Group under the Biomass Research and Development (BR&D) Board meets to discuss U.S. federal funding and regulatory activities to increase awareness and coordination among algae relevant government programs. The Federal Activities Report on the Bioeconomy: Algae is a follow on report to the BR&D Board’s Federal Activities Report on the Bioeconomy that summarizes Bioeconomy Initiative activities for the algae stakeholder community.

09 BIOMASS FUELS↗

Algal Biomass Production via Open Pond Algae Farm Cultivation: 2019 State of Technology and Future Research

NREL’s algae state of technology benchmarking efforts focus both on front-end algal biomass production and separately on back-end conversion to fuels through NREL’s “combined algae processing” (CAP) pathway. The production model is based on outdoor long-term cultivation data, enabled by comprehensive algal biomass production trials conducted under Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR) consortium efforts, driven by data furnished by Arizona State University (ASU) at the Arizona Center for Algae Technology and Innovation (AzCATI) testbed site. The CAP model is based on experimental efforts conducted under NREL R&D projects. This report focuses on front-end algal biomass production, documenting the pertinent algal biomass cultivation parameters that were input to the NREL open pond algae farm model and reports on key process sustainability indicators for the biomass production stage including annual biomass yields, facility power demand, and water consumption.

09 BIOMASS FUELS↗

The Algae Testbed Public Private Partnership -ATP 3 (Final Closeout Report)

The Algae Testbed Public Private Partnership (ATP3) was proposed in response to the ADVANCEMENTS IN SUSTAINABLE ALGAL PRODUCTION (ASAP) FUNDING OPPORTUNITY NUMBER: DE-FOA-0000615 TOPIC AREA 2-DEVELOPMENT OF REGIONAL ALGAL FEEDSTOCK TESTBED (RAFT) PARTNERSHIPS in 2012. For six years, from 2013 through 2019, ATP 3 was operated as a multi-institutional effort funded by the Department of Energy to establish a network of operating testbeds that brought together world-class scientists, engineers and business executives whose goal it was to increase stakeholder access to high quality facilities by making available an unparalleled array of outdoor cultivation, downstream equipment, and laboratory facilities to the algal R&D community. ATP 3 utilized the same powerful combination of facilities and technical expertise to support TEA, LCA and resource modeling and analysis activities, helping to close critical knowledge gaps and inform robust analyses of the state of technology for algal based biofuels and bioproducts. ATP 3 included testbed facilities at Arizona State University’s (ASU) Arizona Center for Algae Technology and Innovation (AzCATI), and augmented by university and commercial facilities in Hawaii (Cellana), California (Cal Poly San Luis Obispo), Georgia (Georgia Institute of Technology), and Florida (Florida Algae), in addition to partners at the National Renewable Energy Laboratory, Sandia National Laboratories, Valicor Renewables (Michigan), University of Texas at Austin (Texas), Commercial Algae Management (Georgia), Harmon Consulting (Hawaii), Evodos (Netherlands), and Litree (China).

09 BIOMASS FUELS↗

Algal Biomass Production via Open Pond Algae Farm Cultivation: 2021 State of Technology and Future Research

The annual State of Technology (SOT) assessment is an essential activity for platform research conducted under the Bioenergy Technologies Office. It allows for the impact of research progress to be quantified in terms of economic improvements in the overall biofuel production process for a particular biomass processing pathway, whether based on terrestrial or algal biomass feedstocks. As such, initial benchmarks can be established for currently demonstrated performance, and progress can be tracked towards out-year goals to ultimately demonstrate economically viable biofuel technologies. NREL's algae state of technology benchmarking efforts focus both on front-end algal biomass production and separately on back-end conversion to fuels through NREL's "combined algae processing" (CAP) pathway. The production model is based on outdoor long-term cultivation data, enabled by comprehensive algal biomass production trials conducted under Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR) consortium efforts, driven by data furnished by Arizona State University (ASU) at the Arizona Center for Algae Technology and Innovation (AzCATI) testbed site. The CAP model is based on experimental efforts conducted under NREL research and development projects. This report focuses on front-end algal biomass production, documenting the pertinent algal biomass cultivation parameters that were input to the NREL open pond algae farm model based on the latest DISCOVR cultivation performance data. Relative to the fiscal year (FY) 2020 SOT at $683/ton or $603/ton for ASU and FA evaporation scenarios, respectively (unlined pond basis), the FY 2021 SOT represents a slight increase in MBSP of 1%-2%. This is primarily attributed to a slight 4% reduction in annual cultivation productivity achieved at the AzCATI site (supported by the efforts under the DISCOVR consortium noted above) observed during FY 2021 cultivation campaigns.

09 BIOMASS FUELS↗

Algal Biomass Conversion to Fuels via Combined Algae Processing (CAP): 2022 State of Technology and Future Research

The annual State of Technology (SOT) assessment is an essential activity for platform research conducted under the Bioenergy Technologies Office (BETO). It allows for the impact of research progress (both directly achieved in-house at NREL and furnished by partner organizations) to be quantified in terms of economic improvements in the overall biofuel production process for a particular biomass processing pathway, whether based on terrestrial or algal biomass feedstocks. As such, initial benchmarks can be established for currently demonstrated performance, and progress can be tracked toward out-year goals to ultimately demonstrate economically viable biofuel technologies. NREL's algae SOT benchmarking efforts focus both on front-end algal biomass production and separately on back-end conversion to fuels through NREL's "combined algae processing" (CAP) pathway. The production model is based on outdoor long-term cultivation data, enabled by comprehensive algal biomass production trials conducted under Development of Integrated Screening, Cultivar Optimization, and Verification Research (DISCOVR) consortium efforts and driven by data furnished by Arizona State University's (ASU's) Arizona Center for Algae Technology and Innovation (AzCATI) test bed site. The CAP model is primarily based on experimental efforts conducted under NREL research and development projects, with some process parameters provided by partner organizations. Assumptions regarding the wet storage of algae use data provided by Idaho National Laboratory (INL), while parts of the polyurethane production process leverage BETO-funded research from collaborators at Algenesis and the University of California, San Diego (UCSD). This report focuses on back-end conversion of algal biomass through the CAP pathway, highlighting the 2022 updates to minimum fuel selling price (MFSP). This update incorporates improvements to fermentation performance for two biological pathways through carboxylic acid and 2,3-butanediol (BDO) intermediates, as demonstrated through parallel research on the biochemical conversion of corn stover. Improvements are applied to the glucose fraction of the biomass only, while parameters regarding the conversion of the mannose fraction (not a significant component in corn stover) are maintained consistently with prior CAP SOTs. Additional parameters are also updated to reflect the most current understanding of each pathway, including an increase in the catalyst loading requirement in the ketonization step of the acids pathway and a decrease in the fermentation productivity in the BDO pathway. Additionally, the biomass feedstock costs (minimum biomass selling price [MBSP]), yields, and seasonal variability from the upstream cultivation SOT model were also incorporated into downstream Aspen Plus CAP models.

09 BIOMASS FUELS↗