Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARROW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Boom Softening and Nacelle Integration on an Arrow-Wing High-Speed Civil Transport Concept

During the last cycle of concept design and wind-tunnel testing, the goal of the low-boom- shaped HSCT concepts (the B-935, the LB-16, and the LB- 1 8) was to meet mission requirements and generate shaped, ground-level pressure signatures with nose shock strengths of 1.0 psf or less. The wind-tunnel tests of these concepts produced results that were partially successful and encouraging although not fully up to expectations. In spite of this, however, these conceptual designs were overly optimistic and not acceptable because: the wing planforms had excessive area; the wing structural aspect ratio was too high; one concept had aft-fuselage rather than under-the-wing engines; and the gross takeoff weights were unrealistically low because of engines that were early, high-tech versions of later, revised, more-realistic engines. The need for reducing the ground-level overpressure shock strengths still existed; a need to be met within more restrictive guidelines of mission performance and gross takeoff weight limitations. Therefore, it was decided that the next conceptual design cycle would focus on decreased nose shock strengths, "boom softening," in the signatures of the Boeing and the McDonnell Douglas baseline concepts rather than low-boom concepts with shaped-signature designs. Overly-optimistic results were not the only problem with these low-sonic-boom concepts. Papers given at the 1994 Sonic-Boom Workshop had demonstrated that the problem of successful nacelle integration on HSCT concepts had only been partially solved. Wind-tunnel pressure signature data, from the HSCT-11B (a.k.a. the LB-18) wind-tunnel model, showed that the Langley HSCT design and analysis method had been successful in reducing the nacelle-volume disturbances in the flow field. This was due.to the engine nacelles mounted behind the wing trailing-edge on the aft fuselage so that no nacelle-wing interference-lift flow-field disturbances were generated. While acceptable from a sonic-boom research point of view, this concept was unacceptable from several practical and structural considerations. Preliminary wind-tunnel pressure signature data from the LB-16 wind-tunnel model, which had the engine nacelles mounted under the wings (the usual location), indicated that the application of the Langley nacelle-integration method had been only partially successful in the reduction of the nacelle-volume with nacelle-wing interference-lift pressure disturbances. So, "boom softening" had to also address the task of successful integration of the engine nacelles, with the engines in the required under-the-wing location. Unless this problem was solved, low-sonic-boom and low-drag modifications to the wing planform, the airfoil shape, and the fuselage longitudinal area distribution could be nullified if the nacelle disturbances added increments to the nose-shock strengths that were removed through component tailoring. In this paper, an arrow-wing boom-softened HSC7 concept which incorporated modifications to a baseline McDonnell Douglas concept is discussed. The analysis of the concept's characteristics will include estimates of weight, center of gravity, takeoff field length, mission range, and predictions of its ground-level sonic-boom pressure signature. Additional modifications which enhanced the softened-boom performance of this concept are also described as well as estimates of the performance penalties induced by these modifications.

Mack, Robert J.↗

Supersonic Aerodynamic Design Improvements of an Arrow-Wing HSCT Configuration Using Nonlinear Point Design Methods

This paper is a discussion of the supersonic nonlinear point design optimization efforts at McDonnell Douglas Aerospace under the High-Speed Research (HSR) program. The baseline for these optimization efforts has been the M2.4-7A configuration which represents an arrow-wing technology for the High-Speed Civil Transport (HSCT). Optimization work on this configuration began in early 1994 and continued into 1996. Initial work focused on optimization of the wing camber and twist on a wing/body configuration and reductions of 3.5 drag counts (Euler) were realized. The next phase of the optimization effort included fuselage camber along with the wing and a drag reduction of 5.0 counts was achieved. Including the effects of the nacelles and diverters into the optimization problem became the next focus where a reduction of 6.6 counts (Euler W/B/N/D) was eventually realized. The final two phases of the effort included a large set of constraints designed to make the final optimized configuration more realistic and they were successful albeit with a loss of performance.

Unger, Eric R.↗

Experimental Investigation of a Point Design Optimized Arrow Wing HSCT Configuration

The M2.4-7A Arrow Wing HSCT configuration was optimized for straight and level cruise at a Mach number of 2.4 and a lift coefficient of 0.10. A quasi-Newton optimization scheme maximized the lift-to-drag ratio (by minimizing drag-to-lift) using Euler solutions from FL067 to estimate the lift and drag forces. A 1.675% wind-tunnel model of the Opt5 HSCT configuration was built to validate the design methodology. Experimental data gathered at the NASA Langley Unitary Plan Wind Tunnel (UPWT) section #2 facility verified CFL3D Euler and Navier-Stokes predictions of the Opt5 performance at the design point. In turn, CFL3D confirmed the improvement in the lift-to-drag ratio obtained during the optimization, thus validating the design procedure. A data base at off-design conditions was obtained during three wind-tunnel tests. The entry into NASA Langley UPWT section #2 obtained data at a free stream Mach number, M(sub infinity), of 2.55 as well as the design Mach number, M(sub infinity)=2.4. Data from a Mach number range of 1.8 to 2.4 was taken at UPWT section #1. Transonic and low supersonic Mach numbers, M(sub infinity)=0.6 to 1.2, was gathered at the NASA Langley 16 ft. Transonic Wind Tunnel (TWT). In addition to good agreement between CFD and experimental data, highlights from the wind-tunnel tests include a trip dot study suggesting a linear relationship between trip dot drag and Mach number, an aeroelastic study that measured the outboard wing deflection and twist, and a flap scheduling study that identifies the possibility of only one leading-edge and trailing-edge flap setting for transonic cruise and another for low supersonic acceleration.

Narducci, Robert P.↗

A Coupled-Cluster Study of XON (X=H, F, Cl), and the XON (left and right arrow) XNO Transition States

The XON molecules (X=H, F, and Cl) have been studied using the singles and doubles coupled-cluster method that includes a perturbational estimate of the effects of connected triple excitations, CCSD(T), in conjunction with a double polarized triple-zeta basis set. The equilibrium geometries, dipole moments, harmonic vibrational frequencies and infrared intensities have been predicted. The X-O bond distance is shown to be abnormally long for X=F and Cl, and this is attributed to the degree of ionic bonding and the stability of NO(+). Based on Mulliken population analyses, it is shown that there is a significant degree of X(-), ON(+) ionic bonding character for FON and ClON, whereas for HON the ionic character is reduced and best described as H(+), NO(-). The stability of the XON molecule relative to the XNO isomer is shown to increase in the order HON<FON<ClON, although even ClON is 27.0 plus or minus 1.0 kcal/mol (0 K) less stable than ClNO. The XON (left and right arrow) XNO transition states are also investigated. FON and ClON possess the lowest barrier heights to isomerization (7.2 plus or minus 1.0 kcal/mol at 0 K), but these are sufficiently large to suggest that isomerization should not be rapid at low temperatures.

Lee, Timothy↗

Absolute Rovibrational Intensities, Self-Broadening and Self-Shift Coefficients for the X(sup 1) Sigma(+) V=3 (left arrow) V=0 Band (C-12)(O-16)

The rotationless transition moment squared for the x(sup 1) sigma (sup +) v=3 (left arrow) v=0 band of CO is measured to be the absolute value of R (sub 3-0) squared = 1.7127(25)x 10(exp -7) Debye squared. This value is about 8.6 percent smaller than the value assumed for HITRAN 2000. The Herman-Wallis intensity factor of this band is F=1+0.01168(11)m+0.0001065(79)m squared. The determination of self-broadening coefficients is improved with the inclusion of line narrowing; self-shifts are also reported.

Chackerian, Charles, Jr.↗

Low-Speed Investigation of the Effects of Large Wing-Sideslip Angles on the Aerodynamic Characteristics of Two Arrow-Wing-Fuselage Arrangements

A wind-tunnel investigation has been made of two methods proposed to reduce the high sinking speeds and improve the landing characteristics of low-aspect-ratio hypersonic airplanes by placing the wing at large angles of sideslip to increase its effective aspect ratio. The models investigated had conical fuselages and arrow wings, with a leading-edge sweep-back of 77.4deg, an aspect ratio of 1.23, and a 4-percent-thick straight-wedge section. For one model, the wing was pivoted on the fuselage to angles of wing sideslip from 0 to 90deg. For the other model, the wing was fixed to the fuselage, and the wing and fuselage were yawed together to sideslip angles from 0 to 90deg. The investigation was made in the Langley 300-MPH 7- by 10-foot tunnel for an angle-of-attack range from -8 to above 28deg. Longitudinal stability and control through the use of horizontal tails with elevators was studied on the pivoted-wing configuration. The roll control for both configurations was studied with deflection of the apex portion of the wing about an axis along the wing center line. The use of flaps with the wing at large sideslip angles was also investigated.

Thomas G Gainer↗

Supersonic Aerodynamic Characteristics of a Low-Drag Aircraft Configuration having an Arrow Wing of Aspect Ratio 1.86 and a Body of Fineness Ratio 20

A free-flight rocket-propelled-model investigation was conducted at Mach numbers of 1.2 to 1.9 to determine the longitudinal and lateral aero-dynamic characteristics of a low-drag aircraft configuration. The model consisted of an aspect-ratio -1.86 arrow wing with 67.5 deg. leading-edge sweep and NACA 65A004 airfoil section and a triangular vertical tail with 60 deg. sweep and NACA 65A003 section in combination with a body of fineness ratio 20. Aerodynamic data in pitch, yaw, and roll were obtained from transient motions induced by small pulse rockets firing at intervals in the pitch and yaw directions. From the results of this brief aerodynamic investigation, it is observed that very slender body shapes can provide increased volumetric capacity with little or no increase in zero-lift drag and that body fineness ratios of the order of 20 should be considered in the design of long-range supersonic aircraft. The zero-lift drag and the drag-due-to-lift parameter of the test configuration varied linearly with Mach number. The maximum lift-drag ratio was 7.0 at a Mach number of 1.25 and decreased slightly to a value of 6.6 at a Mach number of 1.81. The optimum lift coefficient, normal-force-curve slope, lateral-force-curve slope, static stability in pitch and yaw, time to damp to one-half amplitude in pitch and yaw, the sum of the rotary damping derivatives in pitch and also in yaw, and the static rolling derivatives all decreased with an increase in Mach number. Values of certain rolling derivatives were obtained by application of the least-squares method to the differential equation of rolling motion. A comparison of the experimental and calculated total rolling-moment-coefficient variation during transient oscillations of the model indicated good agreement when the damping-in-roll contribution was included with the static rolling-moment terms.

Gillespie, Warren, Jr.↗

Cellerator: extending a computer algebra system to include biochemical arrows for signal transduction simulations

Cellerator describes single and multi-cellular signal transduction networks (STN) with a compact, optionally palette-driven, arrow-based notation to represent biochemical reactions and transcriptional activation. Multi-compartment systems are represented as graphs with STNs embedded in each node. Interactions include mass-action, enzymatic, allosteric and connectionist models. Reactions are translated into differential equations and can be solved numerically to generate predictive time courses or output as systems of equations that can be read by other programs. Cellerator simulations are fully extensible and portable to any operating system that supports Mathematica, and can be indefinitely nested within larger data structures to produce highly scaleable models.

Non-NASA Center↗

The R{bar 3}c{r-arrow}R{bar 3}m transition in nitratine, NaNO{sub 3}, and implications for calcite, CaCO{sub 3}.

The temperature dependences of the crystal structure and superstructure intensities in sodium nitrate, mineral name nitratine, NaNO{sub 3}, were studied using Rietveld structure refinements based on synchrotron powder X-ray diffraction. Nitratine transforms from R{bar 3}c to R{bar 3}m at T{sub c} = 552(1) K. A NO{sub 3} group occupies, statistically, two positions with equal frequency in the disordered R{bar 3}m phase, but with unequal frequency in the partially ordered R{bar 3}c phase. One position for the NO{sub 3} group is rotated by 60{sup o} or 180{sup o} with respect to the other. The occupancy of the two orientations in the R{bar 3}c phase is obtained from the occupancy factor, x, for the O1 site and gives rise to the order parameter, S = 2x ? 1, where S is 0 at T{sub c} and 1 at 0 K. The NO{sub 3} groups rotate in a rapid process from about 541 to T{sub c}, where the a axis contracts. Using a modified Bragg-Williams model, a good fit was obtained for the normalized intensities (that is, normalized, NI{sup 1/2}) for the (113) and (211) reflections in R{bar 3}c NaNO{sub 3}, and indicates a second-order transition. Using the same model, a reasonable fit was obtained for the order parameter, S, and also supports a second-order transition.

36 MATERIALS SCIENCE↗

Real wavepacket code for ABC + D {r_arrow} AB + CD reactive scattering.

We discuss a six-dimensional, time-dependent real wavepacket (RWP) code designed to obtain reaction probabilities for ABC(v{sub I}) + D {yields} AB + CD four-atom reactions, where v{sub I} is a collective index for the initial quantum state of the triatomic molecule. The code provides exact results for total angular momentum J = 0, and invokes the helicity decoupling (or centrifugal sudden) approximation for J > 0. Our new RWP code has been extensively checked by considering the benchmark H + H{sub 2}O {yields} H{sub 2} + OH abstraction reaction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

CH{sub 3} + O{sub 2} {r_arrow} H{sub 2} CO + OH revisited.

New reflected shock tube kinetics experiments have been performed on the reaction CH{sub 3} + O{sub 2} -> H{sub 2}CO + OH over the temperature range 1244-1502 K. This study was carried out using a White cell multipass (path length = 7 m) optical system observing OH-radical absorption at 308 nm. Within experimental error, the new results are in excellent agreement with an earlier study from this laboratory and have therefore been combined with the earlier data, yielding an updated Arrhenius description for the rate constant, k = (1.06 {+-} 0.32) x 10{sup -12} exp(-6801 {+-} 439K/T) cm{sup 3} molecule{sup -1} s{sup -1}. This result is compared to earlier determinations, evaluations, and theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Classical trajectory studies of the D + H{sub 2} {r_arrow} HD + H reaction confined in carbon nanotubes : parallel trajectories.

We use full-dimensional classical trajectories to study how reaction cross sections for the D + H{sub 2} {yields} DH + H reaction are altered when the system is confined to move within various sized carbon nanotubes (CNTs). We focus on trajectories with initial conditions such that collisions with the nanotube walls are possible. Unlike our previous studies where the initial conditions minimized the potential for such collisions Lu, T.; Goldfield, E. M.; Gray, S. K. J. Phys. Chem. C 2008, 112, 15260, we find that reaction cross sections are enhanced in all the differently sized CNTs compared to cross sections in the isolated systems, although the enhancements are larger for the smaller CNTs. We interpret our results based on a simple specular reflection model for collision cross sections within a cylinder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Delayed choice experiments, the arrow of time, and quantum measurement

By a radical modification of statistical mechanics the measurement process of quantum mechanics can be described in terms of pure, unitary time evolution, with no wave function collapse or many-world ideas. The key notion is 'special states', rare microscopic states of a complex system. Recovering the standard probabilities requires of this theory the appearance of Cauchy-distributed noise in some measurement processes. This article treats experimental situations where such noise might be detected and correlated with the need or absence of need for special states. Included in this possibility are 'delayed choice' experiments, in which the correlation contravenes conventional ideas on causality. Background material on all topics is provided.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗