Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMORPHOUS STATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Local chemical and topological order in Al-Tb and its role in controlling nanocrystal formation

How the chemical and topological short- to medium-range order develops in Al-Tb glass and its ultimate effect on the control of the high number density of face-centered-cubic-Al (fcc-Al) nuclei during devitrification are described. A combined study using high-energy X-ray diffraction (HEXRD), atom probe tomography (APT), transmission electron microscopy and fluctuation electron microscopy (FEM) was conducted in order to resolve the local structure in amorphous Al 90 Tb 10 . Reverse Monte Carlo simulations and Voronoi tessellation analysis based on HEXRD experiments revealed a high coordination of Al around Tb atoms in both liquid and amorphous states. APT results show Al-rich and Al-depleted regions within the as-quenched alloy. A network structure of Tb-rich clusters divides the matrix into nanoscale regions where Al-rich clusters are isolated. It is this finely divided network which allows the amorphous structure to form. Al-rich regions are the locus for fcc-Al crystallization, which occurs before the intermetallic crystallization. FEM reveals medium-range ordered regions ~2 nm in diameter, consistent with fcc-Al and trigonal-like Al 3 Tb crystal structures. We propose that the high coordination of Al around Tb limits diffusion in the intermetallic network, allowing for the isolated Al-rich regions to form at high density. These regions are responsible for the extremely high density of Al nanocrystal nuclei.

36 MATERIALS SCIENCE↗

Pressure-induced crystallization of amorphous Ge[subscript 2]Sb[subscript 2]Te[subscript 5]

Using in situ x-ray diffraction, we demonstrate a pressure-induced crystallization of as-deposited amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} (a-GST) into a body-centered-cubic (bcc) solid solution at 28 GPa, and the back transformation from the bcc-GST to a-GST. A large hysteresis loop was observed, as the bcc-GST was retained until 15 GPa. Comparisons have been made, employing the x-ray data and the structural information obtained from ab initio molecular dynamics simulations, between the as-deposited a-GST and the a-GST obtained from the pressure-induced collapse of the rocksalt GST, both at a high hydrostatic pressure (20 GPa) prior to their crystallization to bcc. The results suggest that both routes have resulted in the same high-pressure amorphous state, which explains their crystallization into bcc-GST at similar pressures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Change in the Debye Temperature of a Single-Component Substance upon Amorphization

A method for calculating the Debye temperature of a single-component substance in the amorphous state is proposed based on a nonlinear dependence of first coordination number k{sub n} of the given structure on its packing factor k{sub p} as established previously. Proceeding from previously defined parameters of the Mie–Lennard-Jones potential, the Debye temperatures have been calculated for some pure crystalline and amorphous metals, diamond, silicon, and germanium, which are in good agreement with estimations reported by other researchers. It is shown that a minimum specific Helmholtz free energy is attained at k{sub p} = 0.45556, which means that this packing corresponds to a thermodynamically stable amorphous structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Phase Transformations in Superlocalization Band in Ni{sub 3}Ge Single Crystal

The paper studies the high-temperature plastic deformation in Ni{sub 3}Ge alloy single crystals localizing in a band a few tens of microns wide that reaches the shear strain of thousands of percent. The electron backscatter diffraction and synchrotron radiation techniques allow investigating the structure of the single crystal in the band of super-localized plastic deformation. It is shown that super-localization of plastic deformation occurs due to the formation of polycrystalline multi-level substructure in the initial single crystal. The grain size and grain misorientation bimodal distributions are determined in the polycrystalline substructure. Also, regions of amorphous state are observed in the super-localization band at high homologous temperature Т > 0.5T{sub m}. A partial destruction of the far atomic order is detected.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical Properties of Potassium Phosphate Glass Prepared by Sol Gel Method

Series of glasses based on Al{sub 2}O{sub 3}-K{sub 2}O-P{sub 2}O{sub 5} have successfully been made by sol gel method. The amorphous state has been confirmed by X-ray diffraction (XRD) while the actual composition has been determined using Energy Dispersive X-ray (EDX) analysis. The glass density is determined using Archimedes method while the Vickers Micro hardness Test has been used to measure the hardness. It is found that all the samples are amorphous in nature with their actual composition contained phosphate in the range of 40-53% mol. It is also observed that the glass density is about 2.4 gcm{sup -3} while the hardness is in the range of 40-100 Hv, depending on composition.

36 MATERIALS SCIENCE↗

X-ray peak broadening analysis of AA 6061{sub 100-x} - x wt.% Al{sub 2}O{sub 3} nanocomposite prepared by mechanical alloying

Nanocrystalline AA 6061 alloy reinforced with alumina (0, 4, 8, and 12 wt.%) in amorphized state composite powder was synthesized by mechanical alloying and consolidated by conventional powder metallurgy route. The as-milled and as-sintered (573 K and 673 K) nanocomposites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The peaks corresponding to fine alumina was not observed by XRD patterns due to amorphization. Using high-resolution transmission electron microscope, it is confirmed that the presence of amorphized alumina observed in Al lattice fringes. The crystallite size, lattice strain, deformation stress, and strain energy density of AA 6061 matrix were determined precisely from the first five most intensive reflection of XRD using simple Williamson-Hall models; uniform deformation model, uniform stress deformation model, and uniform energy density deformation model. Among the developed models, uniform energy density deformation model was observed to be the best fit and realistic model for mechanically alloyed powders. This model evidenced the more anisotropic nature of the ball milled powders. The XRD peaks of as-milled powder samples demonstrated a considerable broadening with percentage of reinforcement due to grain refinement and lattice distortions during same milling time (40 h). The as-sintered (673 K) unreinforced AA 6061 matrix crystallite size from well fitted uniform energy density deformation model was 98 nm. The as-milled and as-sintered (673 K) nanocrystallite matrix sizes for 12 wt.% Al{sub 2}O{sub 3} well fitted by uniform energy density deformation model were 38 nm and 77 nm respectively, which indicate that the fine Al{sub 2}O{sub 3} pinned the matrix grain boundary and prevented the grain growth during sintering. Finally, the lattice parameter of Al matrix in as-milled and as-sintered conditions was also investigated in this paper. Research highlights: {yields} Integral breadth methods using various Williamson-Hall models were investigated for line profile analysis. {yields} Uniform energy density deformation model is observed to the best realistic model. {yields} The present analysis is used for understanding the stress and the strain present in the nanocomposites.

36 MATERIALS SCIENCE↗

Atomic Collision and Ionization Effects in Oxides

Irradiation with ions and electrons provides accelerated study of radiation damage in nuclear materials, such as those proposed for immobilization of actinides and long-lived fission products. The effects of ion irradiation in SrTiO3, Sm2Ti2O7 and Sr2Nd8(SiO4)6O2, as representative materials, are studied using 1 MeV Au+ ions. The irradiation-induced disorder, due to atomic collisions processes, increases nonlinearly with irradiation dose and is well described by a disorder accumulation model that includes contributions from amorphous domains, point defects and defect clusters. Ionization from 200 keV electrons induces recrystallization at the amorphous/crystalline (a/c) interface that exhibits several distinct stages associated with residual defect annihilation near the interface, epitaxial regrowth at the interface, and a surface-stabilized amorphous state. Understanding ionization effects and the coupled effects of electronic and atomic dynamics on material behavior is a challenging area for scientific research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Generation of a bleaching wave in an ST-50-1 glass ceramics induced by a Nd:YAG laser

It is shown that upon exposing glass ceramics to laser radiation for which the initial polycrystalline phase is opaque, whereas the corresponding glass phase is transparent, the transparency oscillations can be produced due to the laser-induced phase transitions from the crystalline to amorphous state and vice versa, resulting in the propagation of a bleaching and darkening wave. (interaction of laser radiation with matter)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Investigations of the crystallization mechanism of CrSb and CrSb{sub 2} multilayered films using in-situ X-ray diffraction and in-situ X-ray reflectometry

Chromium and antimony multilayered films with variable elemental layer thickness were deposited on (1 0 0)-Si substrate cooled with liquid nitrogen. The stoichiometry of the films was adjusted to Cr:Sb=1:1 and 1:2. The thickness of Cr-Sb repeating units of these multifilms was varied between 11.4 and 102.5 A. Satellite maxima in the X-ray reflectivity curves observed for films in the as-deposited state demonstrate an alternating stacking of the evaporated elements. The reactivity of the superlattice reactants was investigated with temperature dependent in-situ X-ray diffractometry and X-ray reflectometry. The crystallization temperature of CrSb depends on the double-layer thickness and is about 90 Degree-Sign C for a Cr:Sb ratio of 1:1 and double-layer thickness of 53.7 A where nucleation and crystal formation occurs at the element interfaces, while for a thin double-layer thickness (11.4 A) first interdiffusion of the elements occurs before crystallization starts, i.e., an amorphous intermediate is formed prior to crystallization of CrSb. A decomposition reaction into CrSb{sub 2} occurs at about 230 Degree-Sign C, and up to about 575 Degree-Sign C, CrSb, CrSb{sub 2} and amorphous Cr coexist. For the ratio Cr:Sb=1:2 and a thin double-layer thickness prior to crystallization of CrSb{sub 2} nano-sized crystallites with a composition near CrSb{sub 2} nucleate and grow. These crystallites are then successively transformed in long-range ordered crystals exhibiting a pronounced preferred orientation. For films with a thicker repeat unit first formation of CrSb is observed which then reacts with elemental Sb yielding crystalline CrSb{sub 2}. An activation energy for interdiffusion of Cr and Sb of about 1.8 eV is estimated for a film with Cr:Sb=1:1 exhibiting a double-layer thickness of about 53.7 A and an energy for crystal growth of about 1.1 eV. For the film with the thinner double-layer thickness of 11.4 A a lower value of the activation energy for interdiffusion is obtained. For CrSb{sub 2} the energy for crystal growth is about 3.0 eV being significantly larger than for CrSb. Specific resistivity and Hall coefficient measurements were performed for crystalline CrSb and CrSb{sub 2} films. The temperature-dependent resistivity measurement exhibits a metallic behavior for CrSb and semi-conducting properties for CrSb{sub 2}. - Graphical abstract: The compound CrSb{sub 2} crystallizes from the amorphous state via intermediate formation of CrSb. Highlights: Black-Right-Pointing-Pointer CrSb and CrSb{sub 2} crystallize at very low temperatures in multilayered films. Black-Right-Pointing-Pointer Film thickness determines crystallization at interfaces or from amorphous intermediate. Black-Right-Pointing-Pointer Prior to crystallization of CrSb{sub 2}, highly textured CrSb crystallizes first. Black-Right-Pointing-Pointer Depending on the film thickness CrSb{sub 2} exhibits different preferred orientations.

36 MATERIALS SCIENCE↗

Pressure and temperature phase diagram of Gd{sub 2}Ti{sub 2}O{sub 7} under irradiation

The pressure and temperature phase diagram of Gd{sub 2}Ti{sub 2}O{sub 7} under irradiation are calculated by means of molecular dynamics calculations. The critical temperature for amorphization obeys a linear law with pressure. Gd{sub 2}Ti{sub 2}O{sub 7} under irradiation transits towards the fluorite above this temperature and amorphizes below. The configuration of the Ti interstitial reveals to be the key of the amorphizability of Gd{sub 2}Ti{sub 2}O{sub 7}. Its stability depends upon disorder and pressure. Low pressure promotes the stabilization of Ti linked-polyhedra that drive the system to the amorphous state under irradiation. Conversely, high pressure activates its destabilization to interstitials that recombine with vacancies, driving the system to the fluorite structure under irradiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Mechanical Stresses and Annealing on the Magnetic Structure and the Magnetic Impedance of Amorphous CoFeSiBCr Microwires

The structural and magnetic properties of amorphous ferromagnetic microwires can undergo significant measurements under the action of external mechanical stresses and heat treatment. The study of transformations occurring in this case is important for designing various sensors of mechanical stresses, loading, and temperature and also for inducing in the wires a certain type of magnetic anisotropy that plays a significant role in the realization of various effects in them. In this work, the influence of external stresses and annealing on the processes of the magnetization and the magnetic impedance of Co{sub 71}Fe{sub 5}B{sub 11}Si{sub 10}Cr{sub 3} microwires having a low positive magnetostriction (~10{sup -8}) in amorphous state has been studied. The influence of external stresses leads to a sharp change in the character of the magnetization reversal curve, which was due to the change in the sign of the magnetostriction and the type of magnetic anisotropy. The amplitude of higher harmonics and the value of the magnetic impedance, respectively, are sensitive to mechanical stresses. Elastic stresses in the wires with a partial crystallization do not lead to a marked change in the magnetic properties; however, annealing can lead to a substantial increase in the axial magnetic anisotropy of the wires existing in the stressed state. The experimental results are analyzed in the framework of a magnetostriction model of induced magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic rearrangements in amorphous Al{sub 2}O{sub 3} under electron-beam irradiation

The electron-irradiation-induced crystallization of amorphous Al{sub 2}O{sub 3} (a-Al{sub 2}O{sub 3}) was investigated by in-situ transmission electron microscopy under the wide electron-energy region of 25-300 keV. The formation of {gamma}-Al{sub 2}O{sub 3} nanocrystallites was induced by irradiating the a-Al{sub 2}O{sub 3} thin film along with the formation of nanovoids in the crystalline grains regardless of the acceleration voltage. The crystallization became more pronounced with decreasing the electron energy, indicating that electronic excitation processes play a dominant role in the formation of {gamma}-Al{sub 2}O{sub 3}. Radial distribution analyses suggested that a-Al{sub 2}O{sub 3} transforms to {gamma}-phase via the 'excited' ('stimulated') amorphous state, in which the breaking and rearrangement of unstable short-range Al-O bonds, i.e., fivefold-coordinated Al-O (AlO{sub 5}) basic units, occur.

36 MATERIALS SCIENCE↗

Evidence for Electronic Gap-Driven Metal-Semiconductor Transition in Phase-Change Materials

Phase-change materials are functionally important materials that can be thermally interconverted between metallic (crystalline) and semiconducting (amorphous) phases on a very short time scale. Although the interconversion appears to involve a change in local atomic coordination numbers, the electronic basis for this process is still unclear. Here, we demonstrate that in a nearly vacancy-free binary GeSb system where we can drive the phase change both thermally and, as we discover, by pressure, the transformation into the amorphous phase is electronic in origin. Correlations between conductivity, total system energy, and local atomic coordination revealed by experiments and long time ab initio simulations show that the structural reorganization into the amorphous state is driven by opening of an energy gap in the electronic density of states. The electronic driving force behind the phase change has the potential to change the interconversion paradigm in this material class.

36 MATERIALS SCIENCE↗

Mechanisms of laser induced modification of lead and barium vanadate glasses

We report on our investigations on the mechanisms for structural and morphological change in lead and barium vanadate glasses modified by 785 nm laser irradiation. The fundamental process is thermal in nature, leading to phase decomposition, phase changes, and mass transport in the center of the irradiated region, as well as the formation of lead-or barium-rich debris zones. Crystallization is also a consequence of the exposure to the laser light. We further report on preirradiation experiments in which low-power exposure above a determined energy threshold results in structural changes that bridge the gap between the amorphous state and the ultimate crystalline arrangement. Finally, we discuss the application of the laser irradiation in the making of vanadate microspheres.

36 MATERIALS SCIENCE↗

Pressure-induced Amorphization in Mayenite (12CaO · 7Al2O3)

We report a joint experimental and theoretical study on high pressure structures of nanoporous mayenite (12CaO {center_dot} 7Al{sub 2}O{sub 3}). A pressure-induced amorphization was identified at -13 GPa by in situ high pressure x-ray experiments. The amorphous product can be decompressed to ambient conditions. Ab initio calculations reveal that the anisotropic deformations of empty cages break the crystallographic long-range orders, leading to the formation of high-pressure amorphous state. Furthermore, the deformation routes of empty cages are found fully dependent on their individual locally structural geometry relevant to the distribution of extra-framework oxygen ions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Local structure of binary alloys Zr{sub 70}Pd{sub 30}

The rearrangements of the local environment of zirconium and palladium atoms in the binary alloy Zr{sub 70}Pd{sub 30} upon the transformation from the crystalline to the quasicrystalline and amorphous states were studied by extended X-ray absorption fine structure (EXAFS) analysis. In the quasicrystalline phase, the icosahedral environment was found to be formed only around the zirconium ions because of shifts of both the palladium and zirconium atoms to the center of the cluster; in addition, the structure of the icosahedral clusters is distorted. The transformation from the crystalline to the quasicrystalline phase is accompanied by the atomic rearrangement in the immediate environment of palladium, thus resulting in the partial displacement of palladium by zirconium. In the amorphous phase, the icosahedral short-range order is not observed. A model for the description of the structure of the quasicrystalline phase of Zr{sub 70}Pd{sub 30} is proposed.

36 MATERIALS SCIENCE↗

Precipitation behavior of Widmanstätten O phase associated with interface in aged Ti2AlNb-based alloys

Highlights: • Ball milling tunes the morphology of primary O phase in Ti{sub 2}AlNb alloys. • The interface of Widmanstatten B2 and O affects the hardness of the alloys. • The entire precipitation process of Widmanstatten O phase is reported. - Abstract: Ti{sub 2}AlNb-based alloys, spark plasma sintered from ball-milled octahedral Ti-22Al-25Nb powder, are aged for 0–3 h in this study. Ball milling tunes the morphology of primary orthorhombic (O) phase to be columnar, and improves the mechanical properties of the alloys. The evolution of the Widmanstätten O phase, which brought main precipitation strengthening effect, is then investigated during the ageing process. The hardness of the alloys is improved by an increasing content of O phase and the reduced width of the Widmanstätten O phase; in addition, the length of Widmanstätten O phase also brings positive effect on the hardness, which indicates that the hardness is strongly coupled with the interface of the Widmanstätten O precipitates and B2 matrix. By means of transmission electron microscopy observation, the precipitation of O initials with an amorphous state, followed by a coherent interface between (110){sub B2} and (002){sub O}, which is destroyed to be semi-coherent and incoherent during the next ageing stage.

36 MATERIALS SCIENCE↗

Atomic-scale bonding of bulk metallic glass to crystalline aluminum

A Ti{sub 40}Zr{sub 25}Cu{sub 12}Ni{sub 3}Be{sub 20} bulk metallic glass (BMG) was welded to a crystalline aluminum by the parallel plate explosive welding method. Experimental evidence and numerical simulation show that atomic-scale bonding between the BMG and the crystalline aluminum can be achieved, and the weldment on the BMG side can retain its amorphous state without any indication of crystallization in the welding process. Nanoindentation tests reveal that the interface of the explosive joints exhibits a significant increase in hardness compared to the matrix on its two sides. The joining of BMG and crystalline materials opens a window to the applications of BMGs in engineering.

36 MATERIALS SCIENCE↗