Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “well”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Triple-junction solar cells with 39.5% terrestrial and 34.2% space efficiency enabled by thick quantum well superlattices

Multijunction solar cell design is guided by both the theoretical optimal bandgap combination as well as the realistic limitations to materials with these bandgaps. For instance, triple-junction III-V multijunction solar cells commonly use GaAs as a middle cell because of its near-perfect material quality, despite its bandgap being higher than optimal for the global spectrum. Here, we modify the middle cell bandgap using thick GaInAs/GaAsP strain-balanced quantum well (QW) solar cells with excellent voltage and absorption. Additionally, these high-performance QWs are incorporated into a triple-junction inverted metamorphic multijunction device consisting of a GaInP top cell, GaInAs/GaAsP QW middle cell, and lattice-mismatched GaInAs bottom cell, each of which has been highly optimized. We demonstrate triple-junction efficiencies of 39.5% and 34.2% under the AM1.5 global and AM0 space spectra, respectively, and the global efficiency is higher than previous record six-junction devices.

14 SOLAR ENERGY↗

Evaluation of Am–Li neutron spectra data for active well type neutron multiplicity measurements of uranium

Safeguarding nuclear material is an important and challenging task for the international community. One particular safeguards technique commonly used for uranium assay is active neutron correlation counting. This technique involves irradiating unused uranium with ( α,n) neutrons from an Am-Li source and recording the resultant neutron pulse signal which includes induced fission neutrons. Although this non-destructive technique is widely employed in safeguards applications, the neutron energy spectra from an Am-Li sources is not well known. Several measurements over the past few decades have been made to characterize this spectrum; however, little work has been done comparing the measured spectra of various Am-Li sources to each other. This paper examines fourteen different Am-Li spectra, focusing on how these spectra affect simulated neutron multiplicity results using the code Monte Carlo N-Particle eXtended (MCNPX). Two measurement and simulation campaigns were completed using Active Well Coincidence Counter (AWCC) detectors and uranium standards of varying enrichment. The results of this work indicate that for standard AWCC measurements, the fourteen Am-Li spectra produce similar doubles and triples count rates. Finally, the singles count rates varied by as much as 20% between the different spectra, although they are usually not used in quantitative analysis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Distinguishing fissile uranium isotopes using an active well neutron coincidence counter

Proposed thorium-based nuclear fuel cycles are likely to require quantification and verification of 233 U within nuclear material. Because of their similar fission cross sections, active neutron nondestructive assay (NDA) systems may respond similarly to 233 U and 235 U. Traditional safeguards equipment has been optimized for 235 U and 238 U quantification associated with conventional uranium/plutonium fuel cycles and may not be directly applicable to 233 U quantification when mixed with other actinides. This work used models of the large volume active well coincidence counter (LV-AWCC) at Oak Ridge National Laboratory to evaluate the performance of this neutron NDA system to differentiate fissile uranium isotopes. The models were developed to simulate NDA system performance in response to a number of triangular radiation signature training device sources within the central cavity or well. This work predicted that the LV-AWCC can effectively differentiate 233 U from 235 U in certain modes of operation. In active mode, the LV-AWCC with the cadmium liner results in different doubles count rates between the fissile isotopes for a given fissile uranium mass. Without the cadmium liner, the uranium isotopes provide a statistically indistinguishable doubles count rate response for the fissile masses considered in this work (up to approximately 150 g). The cadmium liner serves to harden the neutron interrogation spectrum, which better exploits the notable difference in the 233 U and 235 U fission cross sections at approximately 1 eV. In passive mode, the two fissile isotopes exhibit different doubles and singles count rates regardless of liner presence because the passive source strength of 233 U is approximately 2 orders of magnitude stronger than that of 235 U due to the shorter half-life and correspondingly higher (α, n) yield. We conclude that using neutron interrogation in the LV-AWCC, two measurements are needed to quantify 233 U content in mixed uranium items. The first measurement is used to determine the total fissile uranium mass using a mode that cannot distinguish fissile isotopes (i.e., where a similar response is observed for both fissile uranium isotopes such as active doubles without cadmium or using a thermal neutron interrogation source). In conclusion, the second measurement is used to determine the 233 U content by using a differentiating technique (e.g., passive doubles, passive doubles to singles ratio, active doubles with cadmium).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improving the short-wave infrared response of strained GeSn/Ge multiple quantum wells by rapid thermal annealing

In this work, the evolution of structural, optical and optoelectronic properties of coherently strained Ge 0.883 Sn 0.117 /Ge multiple quantum wells (MQWs) grown by molecular beam epitaxy under rapid thermal annealing (RTA) is systematically investigated. The MQW structure remains fully-strained state with RTA at 400 °C or below and disrupts at higher annealing temperatures due to Sn segregation and interdiffusion of Ge and Sn atoms. The GeSn well layers exhibit the strongest absorption in 2.0–2.4 μm after annealing at 400 °C and become transparent above 1.8 μm after RTA at 600 °C or beyond due to serve Sn segregation. Owing to improved crystal quality after RTA at 400 °C, the dark current of the fabricated metal-semiconductor-metal photodetector is effectively lowered by more than two times. Additionally, the responsivities at 1.55 and 2.0 μm are improved by 4.15 and 3.78 folds, respectively, compared to those of the as-grown sample. Here, the results can be an insightful guidance for the development of high-performance short-wave infrared photonic devices based on Sn-containing group-IV low-dimensional structures.

36 MATERIALS SCIENCE↗

Direct Visualization and Manipulation of Tunable Quantum Well State in Semiconducting Nb 2 SiTe 4

We report quantum well states (QWSs) can form at the surface or interfaces of materials with confinement potential. They have broad applications in electronic and optical devices such as high mobility electron transistor, photodetector, and quantum well laser. The properties of the QWSs are usually the key factors for the performance of the devices. However, direct visualization and manipulation of such states are, in general, challenging. In this work, by using angle-resolved photoemission spectroscopy (ARPES) and scanning tunneling microscopy/spectroscopy (STM/STS), we directly probe the QWSs generated on the vacuum interface of a narrow band gap semiconductor Nb 2 SiTe 4 . Interestingly, the position and splitting of QWSs could be easily manipulated via potassium (K) dosage onto the sample surface. Our results suggest Nb 2 SiTe 4 to be an intriguing semiconductor system to study and engineer the QWSs, which has great potential in device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Picoseconds-Limited Exciton Recombination in Metal–Organic Chalcogenides Hybrid Quantum Wells

Metal-organic species can be designed to self-assemble in large-scale, atomically defined, supramolecular architectures. Hybrid quantum wells, where inorganic two-dimensional (2D) planes are separated by organic ligands, are a particular example. The ligands effectively provide an intralayer confinement for charge carriers resulting in a 2D electronic structure, even in multilayered assemblies. Air-stable metal organic chalcogenides hybrid quantum wells have recently been found to host tightly bound 2D excitons with strong optical anisotropy in a bulk matrix. Here, we investigate the excited carrier dynamics in the prototypical metal organic chalcogenide [AgSePh] ∞ , disentangling three excitonic resonances by low temperature transient absorption spectroscopy. Our analysis suggests a complex relaxation cascade comprising ultrafast screening and renormalization, inter-exciton relaxation, and self-trapping of excitons within few picoseconds. Finally, the ps-decay provided by the self-trapping mechanism may be leveraged to unlock the material's potential for ultrafast optoelectronic applications.

2D excitons↗

Impact of carrier localization on the photoluminescence characteristics of (Ga,In)(N,As) and (Ga,In)(N,As,Sb) quantum wells

Using photoluminescence (PL) spectroscopy, we carry out a comparative study of the optical properties of (Ga,In)(N,As) and (Ga,In)(N,As,Sb) quantum wells. The incorporation of Sb into (Ga,In)(N,As) results in a reduced quantum efficiency at low temperatures but an improved one at room temperature (RT). A PL line shape analysis as well as the temperature dependence of the PL peak energy reveals the existence of band-tail localized states in both material systems. The carrier localization energy is larger for (Ga,In)(N,As,Sb) than for (Ga,In)(N,As), leading to a longer radiative lifetime and thus a reduced quantum efficiency at low temperatures for the former material. The thermal quenching of the quantum efficiency is analyzed by a rate equation model, which shows that the density of nonradiative centers is reduced in (Ga,In)(N,As,Sb) resulting in an enhanced quantum efficiency at RT.

36 MATERIALS SCIENCE↗

Investigation of Strain in AlGaN/GaN Multi Quantum Wells by Complementary Techniques

Al{sub 0.49}Ga{sub 0.51}N(12 nm)/GaN (13 nm) Multi Quantum Wells of 15 periods are grown on sapphire by MOCVD technique. GaN/AlN, each of thickness 200 nm and 20 nm respectively, are used as buffer layers between substrate and epilayer to incorporate the strain in epilayers. It is a well established technique to engineer the band gap in Al{sub x}Ga{sub 1-x}N by adjusting alloy composition. These samples are used in visible and UV light emitters. In the present study, we employ a photoluminescence technique to estimate the composition and luminescence peak positions of AlGaN and GaN. Crystallinity and quality of interfaces have been studied by Rocking curve scan. The Threading Dislocations formed at the GaN buffer layer travel across the entire layers to the surface to form good quality films. Photo-luminescence results show a very sharp GaN peak at 3.4 eV, as observed and reported by others, which shows that samples are free from point defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interband transitions in strained InGaAs/AlAsSb multiple-quantum-well structures

Room temperature photoreflectance (PR) was performed on strained In{sub x}Ga{sub 1-x}As/AlAsSb quantum wells (QWs) grown on InP substrates. We observed clear and well-resolved structures, which could be attributed to the interband optical transitions originating in the QWs. By comparing the transition energies measured from the PR spectra with those theoretically calculated from the confined energy levels in the QWs, we confirmed that the value of the conduction band offset of In{sub 0.8}Ga{sub 0.2}As/AlAsSb was close to 1.7 eV and the nonparabolicity of the conduction band of In{sub 0.8}Ga{sub 0.2}As was between 2.25 and 2.5, which is higher than that obtained using a three-band model.

36 MATERIALS SCIENCE↗

Thickness evaluation of InGaAs/InAlAs quantum wells

This work proposes a new optoelectronic measurement of quantum well (QW) thickness and applies it to doped and undoped In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As multiple-QW structures. Near-infrared spectroscopic identification of the interband optical transition at 100-300 K gave the eigenenergies of the conduction band in the QW. Evaluation of the QW thickness involved analysis of the effective mass at the corresponding eigenenergy. QW thicknesses in the range of 5.45-20.8 nm were determined in six different wafers. These thicknesses agreed well with the QW thicknesses estimated by double-crystal x-ray diffraction within almost two monolayers. This measurement was used to determine the distance of potential boundaries confining the electron wave functions.

36 MATERIALS SCIENCE↗

Direct growth of InAsP/InP quantum well heterostructures on Si using crystalline SrTiO{sub 3}/Si templates

Integrating III-V semiconductors on Si is one of the major challenges of epitaxial growth and presents important applicative interest. We describe here an approach based on the use of crystalline SrTiO{sub 3} (STO)/Si templates. The structural and optical properties of InAsP/InP quantum well heterostructures grown directly on Si and on STO/Si templates are compared. Using STO/Si templates strongly improves the structural properties of the III-V heterostructure, and allows observing room-temperature photoluminescence from the quantum well.

36 MATERIALS SCIENCE↗

Effects of Detuning on Control of Intersubband Quantum Well Transitions with Chirped Electromagnetic Pulses

We study the interaction of a chirped electromagnetic pulse with intersubband transitions of a double semiconductor quantum well. We specifically consider the interaction of the ground and first excited subbands with the electromagnetic field and use the nonlinear density matrix equations for the description of the system dynamics. These equations are solved numerically for various values of the electron sheet density for a realistic double GaAs/AlGaAs quantum well, and the efficiency of population transfer is discussed with emphasis given to the effects of the detuning of the central frequency of the electromagnetic field from resonance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental and theoretical study for InAs quantum dashes-in-a-step-well structure on (001)-oriented InP substrate

An InAs/In{sub 0.73}Ga{sub 0.27}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.53}Al{sub 0.235}Ga{sub 0.235}As quantum dashes-in-a-step-well (QDSWELL) structure grown via molecular beam epitaxy has been studied. It is observed that the photoluminescence (PL) emission wavelength of such a structure can be as long as 2.12 {mu}m at room temperature (RT). This is the longest emission wavelength of InAs QDashes to be realized at RT. The electron and hole energy levels of the InAs/In{sub 0.73}Ga{sub 0.27}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.53}Al{sub 0.235}Ga{sub 0.235}As QDSWELL structure have been calculated using effective-mass envelope-function theory. The calculated transition energy E{sub E1-HH1} (from the first electron energy level E1 to the first heavy-hole energy level HH1) agrees with the measured PL emission peak position quite well. It is found that QDSWELL is an alternative structure for realizing lasers with wavelengths beyond 2 {mu}m at RT.

36 MATERIALS SCIENCE↗

N-polar III-nitride quantum well light-emitting diodes with polarization-induced doping

Nitrogen-polar III-nitride heterostructures present unexplored advantages over Ga(metal)-polar crystals for optoelectronic devices. This work reports N-polar III-nitride quantum-well ultraviolet light-emitting diodes grown by plasma-assisted molecular beam epitaxy that integrate polarization-induced p-type doping by compositional grading from GaN to AlGaN along N-face. The graded AlGaN layer simultaneously acts as an electron blocking layer while facilitating smooth injection of holes into the active region, while the built-in electric field in the barriers improves carrier injection into quantum wells. The enhanced doping, carrier injection, and light extraction indicate that N-polar structures have the potential to exceed the performance of metal-polar ultraviolet light-emitting diodes.

36 MATERIALS SCIENCE↗

Surface photovoltage and photoreflectance study of InGaAs/AlAsSb quantum wells

Room temperature surface photovoltage (SPV), differential surface photovoltage (DSPV), and photoreflectance (PR) measurements were performed on InGaAs/AlAsSb QWs grown on InP substrates. Clear and well-resolved structures, which could be attributed to the interband optical transitions originating in the QWs, were observed in every spectrum. Transition energies measured from the SPV, DSPV, and PR spectra correspond well with those theoretically calculated from the confined energy levels in the QWs. Features those can be attributed to the transitions at the AlAsSb to InP hetero-interfaces were observed in the SPV and DSPV spectra.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Weak localization/antilocalization in a nearly symmetric In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum well

We report weak antilocalization (WAL) measurements in a nearly symmetric In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum well. In this system, an enhancement of the spin-orbit scattering time, equivalently the weakening of the WAL effect, is expected at carrier densities N{sub s} where equal magnitudes between the Rashba and Dresselhaus parameters ({alpha} = {+-}{beta}) are realized. Our magnetotransport measurements indeed exhibited a weakening of the WAL effect as a function of N{sub s}, though the weakening took place at only one carrier density. Our interpretation is that the value of {beta} is so small that the two carrier densities corresponding to {alpha} = {beta} and {alpha} = -{beta} are very close to each other. It turned out that the deduced values for the bulk Dresselhaus parameter {gamma} in In{sub 0.53}Ga{sub 0.47}As/In{sub 0.52}Al{sub 0.48}As quantum wells is considerably smaller than the k{center_dot}p value of 27 eVA{sup 3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carrier spin relaxation in GaInNAsSb/GaNAsSb/GaAs quantum well

We have investigated the carrier spin relaxation in GaInNAsSb/GaNAsSb/GaAs quantum well (QW) by time-resolved photoluminescence (PL) measurement. The sample consists of an 8-nm-thick GaIn{sub 0.36}N{sub 0.006}AsSb{sub 0.015} well, 5-nm-thick GaN{sub 0.01}AsSb{sub 0.11} intermediate barriers and 100-nm-thick GaAs barriers grown by molecular beam epitaxy on a GaAs(100) substrate. The spin relaxation time and recombination lifetime at 10 K are measured to be 228 ps and 151 ps, respectively. As a reference, we have also obtained a spin relaxation time of 125 ps and a recombination lifetime of 63 ps for GaInNAs/GaNAs/GaAs QW. This result shows that crystal quality is slightly improved by adding Sb, although these short carrier lifetimes mainly originate from a nonradiative recombination. These spin relaxation times are longer than the 36 ps spin relaxation time of InGaAs/InP QWs and shorter than the 2 ns spin relaxation time of GaInNAs/GaAs QW.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carrier dynamics and activation energy of CdTe quantum dots in a Cd{sub x}Zn{sub 1-x}Te quantum well

We investigate the optical properties of CdTe quantum dots (QDs) in a Cd{sub 0.3}Zn{sub 0.7}Te quantum well (QW) grown on GaAs (100) substrates. Carrier dynamics of CdTe/ZnTe QDs and quantum dots-in-a-well (DWELL) structure is studied using time-resolved photoluminescence (PL) measurements, which show the longer exciton lifetime of the DWELL structure. The activation energy of the electrons confined in the DWELL structure, as obtained from the temperature-dependent PL spectra, was also higher than that of electrons confined in the CdTe/ZnTe QDs. This behavior is attributed to the better capture of carriers into QDs within the surrounding QW.

36 MATERIALS SCIENCE↗