Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “virtual engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

(Invited) Virtual Analysis of Gas-Diffusion-Electrode CO 2 Electrolyzers

The electrochemical reduction of CO 2 (CO 2 R) to value-added products is an attractive technology for tackling the rising atmospheric CO 2 levels and storing intermittent renewable energy into chemical bonds. Fundamental understanding of CO 2 R has progressed significantly in recent years and is critical in the development of CO 2 R to liquid-fuel electrolyzers, where gas-diffusion electrodes (GDEs) have been shown to be key enabling architectures. Various designs have been proposed and studied in the literature to enhance overall selectivity, rates, and maximize the conversion of CO 2 , the latter of which is only now being recognized as a critical issue. In this respect, there is a need to explore the governing phenomena inherent in these architectures to enable optimization. Mathematical modeling is ideally suited to tackle and explore these multiphysics interactions and provide virtual design analysis. In this talk, we discuss modeling methodologies and physics inherent in these devices and present our recent modeling of GDEs for CO 2 reduction. We specifically examine the impacts of multiphase flow and related phenomena on overall cell performance. We then explore the performance and limitations of various cell designs guided by simulation results and examine potential methods for improving water management and tuning catalyst selectivity including the use of different anion-exchange and bipolar membranes. Finally, we discuss the disparities in local environments between aqueous and GDE devices and propose strategies to reduce the gap in knowledge between the two systems.

42 ENGINEERING↗

Artificial Intelligence for Isotopes: Report on the 2022 Workshop on Artificial Intelligence for Isotope R&D and Production

The Department of Energy Isotope Program (DOE IP) hosted a virtual workshop on Artificial Intelligence (AI) for Isotope R&D and Production on March 17 and April 14, 2022. The purpose of the workshop was for DOE IP to further its understanding of the potential roles for and subsequent opportunities to incorporate AI into its activities. The workshop brought over 80 participants together from both the AI and isotope science communities. Participants contributed ideas through plenary talks, lightning talks, and breakout discussion sessions. The primary focus of all discussions was related to isotope production and processing. However, isotope enrichment, workforce development, and supply chain management were also discussed. This report documents the information presented and discussed at the workshop.

07 ISOTOPE AND RADIATION SOURCES↗

Evaluating Emulation-based Models of Distributed Computing Systems

Emulation-based models of distributed computing systems are collections of virtual ma- chines, virtual networks, and other emulation components configured to stand in for oper- ational systems when performing experimental science, training, analysis of design alterna- tives, test and evaluation, or idea generation. As with any tool, we should carefully evaluate whether our uses of emulation-based models are appropriate and justified. Otherwise, we run the risk of using a model incorrectly and creating meaningless results. The variety of uses of emulation-based models each have their own goals and deserve thoughtful evaluation. In this paper, we enumerate some of these uses and describe approaches that one can take to build an evidence-based case that a use of an emulation-based model is credible. Predictive uses of emulation-based models, where we expect a model to tell us something true about the real world, set the bar especially high and the principal evaluation method, called validation , is comensurately rigorous. We spend the majority of our time describing and demonstrating the validation of a simple predictive model using a well-established methodology inherited from decades of development in the compuational science and engineering community.

97 MATHEMATICS AND COMPUTING↗

Overview of The Inaugural Space Health Impacts for the NASA Experience (SHINE) Training Program – Virtual Space Radiation Curriculum

The Space Radiation Element of the NASA Human Research Program initiated a virtual, annual space radiation curriculum. The Space Health Impacts for the NASA Experience (SHINE) space radiation didactic curriculum aims to educate participants not only in the scientific aspects of space radiation but also in the agency’s risk management strategies. SHINE combines weekly seminars by speakers from NASA, other government agencies, academia, and industry, with networking sessions designed to foster collaboration between participants and interactions with NASA scientists and HRP funded investigators. The inaugural course ran weekly from February 2023 to August 2023 and was comprised of lectures, less formal coffee hours and office hours. The SHINE topics ranged from space environments to health effects and countermeasure to granting opportunities. Participants developed beam time proposals for real, proposed, or potential experiments at the NASA Space Radiation Laboratory (NSRL) at the Brookhaven National Laboratory. For the 2023 course, a total of 59 applications were received from which 25 participants were selected. Selected participants were citizens from 8 countries and comprised 5 graduate students, 4 postdocs, 11 scientists and 5 professors/medical doctors. Participants had a wide range of expertise including molecular and cellular biology, microbiology, botany, physiology, engineering, physics, aerospace medicine, planetary science, biostatistics, and modeling. The second annual SHINE training program is scheduled from February to August 2024. In addition, a separate SHINE space radiation practicum session, to allow participants to gain hands-on radiation experience, will be held Fall 2024 at the NSRL.

Radiation↗

Numerical Simulation of Recirculating Flow and Physical Model of Slag–Metal Behavior in an RH Reactor: Application to Desulfurization

Computational fluid dynamics (CFD) techniques and a 1:7.5 physical model of an RH degasser have been used to evaluate the flow of gas and metal inside an RH reactor for vacuum degassing of liquid steel. The effect of gas injection on the gas spatial distribution, steel circulation rate and flow field inside the ladle, snorkels and vacuum chamber have been assessed. N-pentane oil was employed to evaluate the average residence time as well as the slag droplet size distribution. The predicted radial gas distribution and liquid circulation rate have been validated against experimental data from a physical model. The results with incorporation of the virtual mass force coefficient of 0.25 and the turbulence dispersion force showed better predictions of gas distribution in the up-snorkel as well as circulation rate. Full-scale simulations were performed, and the predicted circulation rate was significantly affected by the argon bubble expansion. Data from these simulations were used to analyze the degree of desulfurization performed by the addition of desulfurizing agents inside the vacuum chamber. A model of the kinetics of desulfurization based on the results from the physical model and CFD simulation and on slag dispersion inside liquid steel yields degrees of desulfurization similar to the industrial trials reported in the literature.

36 MATERIALS SCIENCE↗

NASA's Discovery Program: Moving Toward the Edge (of the Solar System)

NASA's Planetary Science , Division sponsors a competitive program of small spacecraft missions with the goal of performing focused science investigations that complement NASA's larger planetary science explorations at relatively low cost. The goal of the Discovery program is to launch many smaller missions with fast development times to increase our understanding of the solar system by exploring the planets, dwarf planets, their moons, and small bodies such as comets and asteroids. Discovery missions are solicited from the broad planetary science community approximately every 2 years. Active missions within the Discovery program include several with direct scientific or engineering connections to potential future missions to the edge of the solar system and beyond. In addition to those in the Discovery program are the missions of the New Frontiers program. The first New Frontiers mission. is the New Horizons mission to Pluto, which will explore this 38-AU distant dwarf planet and potentially some Kuiper Belt objects beyond. The Discovery program's Dawn mission, when launched in mid-2007, will use ion drive as its primary propulsion system. Ion propulsion is one of only two technologies that appear feasible for early interstellar precursor missions with practical flight times. The Kepler mission will explore the structure and diversity of extrasolar planetary systems, with an emphasis on the detection of Earth-size planets around other stars. Kepler will survey nearby solar systems searching for planets that may fall within the habitable zone,' a region surrounding a star within which liquid water may exist on a planet's surface - an essential ingredient for life as we know it. With its open and competitive approach to mission selections, the Discovery program affords scientists the opportunity to propose missions to virtually any solar system destination. With its emphasis on science and proven openness to the use of new technologies such as ion propulsion, missions flown as part of the program will test out technologies needed for future very deep-space exploration and potentially take us to these difficult and distant destinations.

Johnson, Les↗

GVT Algorithms and Discrete Event Dynamics on 128K+ Processor Cores

Parallel discrete event simulation (PDES) represents a class of codes that are challenging to scale to large number of processors due to tight global timestamp-ordering and fine-grained event execution. One of the critical factors in scaling PDES is the efficiency of the underlying global virtual time (GVT) algorithm needed for correctness of parallel execution and speed of progress. Although many GVT algorithms have been proposed previously, few have been proposed for scalable asynchronous execution and none customized to exploit one-sided communication. Moreover, the detailed performance effects of actual GVT algorithm implementations on large platforms are unknown. Here, three major GVT algorithms intended for scalable execution on high-performance systems are studied: (1) a synchronous GVT algorithm that affords ease of implementation, (2) an asynchronous GVT algorithm that is more complex to implement but can relieve blocking latencies, and (3) a variant of the asynchronous GVT algorithm, proposed and studied for the first time here, to exploit one-sided communication in extant supercomputing platforms. Performance results are presented of implementations of these algorithms on over 64,000 cores of a Cray XT5 system, exercised on a range of parameters: optimistic and conservative synchronization, fine- to medium-grained event computation, synthetic and non-synthetic applications, and different lookahead values. Performance of tens of billions of events executed per second are registered, exceeding the speeds of any known PDES engine, and showing asynchronous GVT algorithms to outperform state-of-the-art synchronous GVT algorithms. Detailed PDES-specific runtime metrics are presented to further the understanding of tightly-coupled discrete event execution dynamics on massively parallel platforms.

99 GENERAL AND MISCELLANEOUS↗

Transport Properties of Nanoporous, Chemically Forced Biological Lattices

Permselective nanochannels are ubiquitous in biological systems, controlling ion transport and maintaining a potential difference across a cell surface. Surface layers (S-layers) are proteinaceous, generally charged lattices punctuated with nanoscale pores that form the outermost cell envelope component of virtually all archaea and many bacteria. Ammonia oxidizing archaea (AOA) obtain their energy exclusively from oxidizing ammonia directly below the S-layer lattice, but how the charged surfaces and nanochannels affect availability of NH4+ at the reaction site is unknown. In this report, we examine the electrochemical properties of negatively charged S-layers for asymmetrically forced ion transport governed by Michaelis–Menten kinetics at ultralow concentrations. Our 3-dimensional electrodiffusion reaction simulations revealed that a negatively charged S-layer can invert the potential across the nanochannel to favor chemically forced NH 4 + transport, analogous to polarity switching in nanofluidic field-effect transistors. Polarity switching was not observed when only the interior of the nanochannels was charged. We found that S-layer charge, nanochannel geometry, and enzymatic turnover rate are finely tuned to elevate NH 4 + concentration at the active site, potentially enabling AOA to occupy nutrient-poor ecological niches. Strikingly, and in contrast to voltage-biased systems, magnitudes of the co- and counterion currents in the charged nanochannels were nearly equal and amplified disproportionally to the NH 4 + current. These simulations imply that engineered arrays of crystalline proteinaceous membranes could find unique applications in industrial energy conversion or separation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cause and effects of hyperskin features on carbon molecular sieve (CMS) membranes

This article considers a previously overlooked feature in carbon molecular sieve (CMS) membranes that we term a “hyperskin” present at the outermost region of dense CMS selective layers. Such a feature with much lower permeability, but similar selectivity compared to the bulk of the skin, reduces CMS hollow fiber permeance below that predicted from corresponding dense films. Effects of the hyperskin are considered for CMS hollow fibers with low skin thicknesses based on two polyimide precursors – Matrimid® and 6FDA:BPDA-DAM. Although the fundamental formation mechanism for the hyperskin feature suggests its existence on virtually all CMS membranes, its impact on transport properties is shown to differ dramatically, depending on the detailed characteristic properties of the specific CMS membrane. Indeed, for hollow fibers with very low nominal resistance (i.e. $\frac {\text{Selective layer thickness determined by SEM}}{\text{Intrinsic permeability of thick dense CMS films}}$), the observed permeance only reaches a small fraction of the predicted permeance. The selectivity between different gas penetrants, however, is not altered by the presence of this hyperskin. While identifying this issue is the major focus of this article, strategies to address this limitation, without compromising the molecular sieving properties of CMS membranes are briefly discussed.

42 ENGINEERING↗

Inchfab – A ultra-low-cost micro and nanofabrication platform (CRADA Final Report)

Inchfab Inc. is developing an ultra-low cost suite of micro- and nanofabrication platforms which allows greater process flexibility and short development cycles. In traditional manufacturing environments, virtually all fabrication happens on 6-12” substrates–which requires prohibitively expensive fabrication facilities (“fabs”). By scaling the substrate size down to 1-2”, Inchfab reduces the capital cost and physical footprint of a fab by two to three orders of magnitude, while still retaining a similar level of performance. Additionally, the design of the Inchfab will allow users to develop fully-customizable fabrication processes, accommodating non-traditional materials and process diversity. Ultimately, the Inchfab platform will enable innovative device designs which currently have limited possibility of being realized. This CRADA project worked on preliminary research to test the feasibility of the Inchfab platform by utilizing equipment at Berkeley Lab to evaluate test samples and characterize equipment performance.

42 ENGINEERING↗

Polymer Macrocycles: A novel topology to control dynamics of rubbery materials (Final Report)

We have successfully made synthetic polymer rings that are larger than previously reported having entanglement numbers as high as Z w ≈300 if the rings entangled as do linear chains. The synthesis was carried out using reversible radical recombination polymerization (R3P) of dithiols which produces a polymer with a very small persistence length. The reported results show surprising dilute solution behaviors due to the fact that polymeric rings expand more than their linear counterparts for polymer chains having a large number of persistence lengths, as developed in this study. The results strongly argue for a systematic investigation of the dilute solution properties of rings having different persistence lengths in different quality solvents, where the theta-condition should lead to results that are independent of the persistence length. For the rheological investigations related to chain entanglements, the polyDODT rings could be diluted so that the rheological data covered from less than one entanglement spacing relative to the linear counterpart to a value of Z w =300. Importantly, because we were able to dilute extremely high entanglement number polyDODT rings to a similar entanglement number as those reported for polystyrene rings that were highly purified using LCCC, we demonstrated that the dynamics of the polyDODT rings virtually overlaps with the dynamics of the polystyrene rings which is very strong evidence that these high molecular weight polyDODT rings are of high purity. Our results demonstrate that the onset of entanglement in rings, as evidenced by the appearance of a rubbery plateau G N 0 and by the onset of a strong power-law dependence of the viscosity on molecular weight (η~M w 5.8 ) or entanglement number (η~Z w 5.8 ), occurs at much higher molecular weights or polymer concentrations than is the case for linear chains. These results should serve as a benchmark for future investigations of the behavior of entangled, circular macromolecules.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Polymer Macrocycles: A novel topology to control dynamics of rubbery materials

We have successfully made synthetic polymer rings that are larger than previously reported having entanglement numbers as high as $Z_w$≈300 if the rings entangled as do linear chains. The synthesis was carried out using reversible radical recombination polymerization (R3P) of dithiols which produces a polymer with a very small persistence length. The reported results show surprising dilute solution behaviors due to the fact that polymeric rings expand more than their linear counterparts for polymer chains having a large number of persistence lengths, as developed in this study. The results strongly argue for a systematic investigation of the dilute solution properties of rings having different persistence lengths in different quality solvents, where the theta-condition should lead to results that are independent of the persistence length. For the rheological investigations related to chain entanglements, the polyDODT rings could be diluted so that the rheological data covered from less than one entanglement spacing relative to the linear counterpart to a value of $Z_w$=300. Importantly, because we were able to dilute extremely high entanglement number polyDODT rings to a similar entanglement number as those reported for polystyrene rings that were highly purified using LCCC, we demonstrated that the dynamics of the polyDODT rings virtually overlaps with the dynamics of the polystyrene rings which is very strong evidence that these high molecular weight polyDODT rings are of high purity. Our results demonstrate that the onset of entanglement in rings, as evidenced by the appearance of a rubbery plateau $G_N^0$ and by the onset of a strong power-law dependence of the viscosity on molecular weight (η~$M_w^{5.8}$) or entanglement number (η~$Z_w^{5.8}$), occurs at much higher molecular weights or polymer concentrations than is the case for linear chains. These results should serve as a benchmark for future investigations of the behavior of entangled, circular macromolecules.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

A standard capsule design for structural material testing in the Advanced Test Reactor

Nuclear materials testing is commonly completed in various material test and research reactors throughout the world, including the Advanced Test Reactor (ATR), but the current capsule design, analysis, and fabrication process can take years to complete. To decrease the costs and time associated with materials testing, a standard capsule has been designed which houses various specimen geometries and allows irradiation in virtually any ATR test position. The standard capsule features locking end caps which connect and lock together to form the capsule stack, eliminating the need for a basket and maximizing the quantity of specimens which are contained within the capsule. A customizable internal gas gap provides thermal resistance between the specimens and reactor coolant, making specimen temperatures from approximately 370 to 1000 K achievable. The flexibility of the capsule design allows experimenters to choose irradiation positions based off desired neutron flux, with typical fluences per cycle ranging from 8.8x10 19 to 2.3x10 21 n/cm 2 , depending on experiment position. Here this paper presents and discusses the standard capsule design and analysis.

36 MATERIALS SCIENCE↗

Recent trends in digital human modeling and the concurrent issues that face human modeling approach

Tremendous strides have been made in the recent years to digitally represent human beings in computer simulation models ranging from assembly plant maintenance operations to occupants getting in and out of vehicles to action movie scenarios. While some of these tools are being actively pursued by the engineering communities, there is still a lot of work that remains to be done for the newly planned planetary exploration missions. For example, certain unique and several common challenges are seen in developing computer generated suited human models for designing the next generation space vehicle. The purpose of this presentation is to discuss NASA s potential needs for better human models and to show also many of the inherent yet not too obvious pitfalls that still are left unresolved in this new arena of digital human modeling. As part of NASA s Habitability and Human Factors Branch, the Anthropometry and Biomechanics Facility has been engaged in studying the various facets of computer generated human physical performance models; for instance, it has been engaged in utilizing three-dimensional laser scan data along with three dimensional video based motion and reach data to gather suited anthropometric and shape and size information that are not available yet in the form of computer mannequins. Our goal is to bring in new approaches to deal with heavily clothed humans (such as, suited astronauts) and to overcome the current limitations of wrongly identifying humans (either real or virtual) as univariate percentiles. We are looking at whole-body posture based anthropometric models as a means to identify humans of significantly different shapes and sizes to arrive at mathematically sound computer models for analytical purposes.

Rajulu, Sudhakar↗

Application of NASA's Advanced Life Support Technologies in Polar Regions

The problems of obtaining adequate pure drinking water and disposing of liquid and solid waste in the U.S Arctic, a region where virtually all water is frozen solid for much of the year, has led to unsanitary solutions. Sanitation and a safe water supply are particularly problems in rural villages. These villages are without running water and use plastic buckets for toilets. The outbreak of diseases is believed to be partially attributable to exposure to human waste and lack of sanitation. Villages with the most frequent outbreaks of disease are those in which running water is difficult to obtain. Waste is emptied into open lagoons, rivers, or onto the sea coast. It does not degrade rapidly and in addition to affecting human health, can be harmful to the fragile ecology of the Arctic and the indigenous wildlife and fish populations. Current practices for waste management and sanitation pose serious human hazards as well as threaten the environment. NASA's unique knowledge of water/wastewater treatment systems for extreme environments, identified in the Congressional Office of Technology Assessment report entitled An Alaskan Challenge: Native Villagt Sanitation, may offer practical solutions addressing the issues of safe drinking water and effective sanitation practices in rural villages. NASA's advanced life support technologies are being combined with Arctic science and engineering knowledge to address the unique needs of the remote communities of Alaska through the Advanced Life Systems for Extreme Environments (ALSEE) project. ALSEE is a collaborative effort involving the NASA, the State of Alaska, the University of Alaska, the North Slope Borough of Alaska, Ilisagvik College in Barrow and the National Science Foundation (NSF). The focus is a major issue in the State of Alaska and other areas of the Circumpolar North; the health and welfare of its people, their lives and the subsistence lifestyle in remote communities, economic opportunity, and care for the environment. As advanced technologies are transferred to the commercial sector the ALSEE project Offers the potential for development of new industries in Alaska to supply the products to support remote communities of the globe.

Bubenheim, David L.↗

High performance context switching for virtualized FPGA accelerators

A hardware context manager in a field-programmable gate array (FPGA) device includes configuration logic configured to program one or more programming regions in the FPGA device based on configuration data for implementing a target configuration of the one or more programming regions. Context management logic in the hardware context manager is coupled with the configuration logic and saves a first context corresponding to the target configuration by retrieving first state information from the set of one or more programming regions, where the first state information is generated based on the target configuration, and storing the retrieved first state information in a context memory. The context management logic restores the first context by transferring the first state information from the context memory to the one or more programming regions, and causing the configuration logic to program the one or more programming regions based on the configuration data.

42 ENGINEERING↗

Multi-spatio-temporal scales PIV in a turbulent buoyant jet discharging in a linearly stratified environment

Time-resolved particle image velocimetry is implemented with a camera array and several laser sheets; this results in a multi-spatio-temporal scale system that is modular and flexible. The setup is optimized to capture global flow features, while locally resolving in space and time near the Kolmogorov scale. The apparatus relies extensively on machine vision CMOS cameras; they are inexpensive and stream to computer hard drive with virtually continuous time-resolved records (up to one hour for the current system). This leads to statistically converged data and also helps in minimizing down time between experimental runs. Details of the implementation and design of experiment are reported. The system instruments a vertical buoyant jet discharging in a linearly stratified environment. Refractive index matched aqueous solutions enable precise optical deployment. The density difference is 3% and the fluids have similar dynamic viscosity. The jet Reynolds number is 2.00 x 10 4 and is above the mixing transition. Such flows are typically challenging to instrument and few velocity field data are available to date. The velocity statistics are reported as well as first insights gained from the campaign.

42 ENGINEERING↗

Forecasting and Early Warning for Adversarial Targeting in Industrial Control Systems

A new feature-based forecasting framework of abnormalities is presented for early warning for cyber-physical control systems. The abnormalities may refer to intelligent cyber-attacks or naturally occurring faults and failures. Techniques presented here are aimed at protecting against unauthorized intrusions as well as fault prevention. Time series signals from system monitoring nodes are converted to features using feature discovery techniques. The feature behavior for each monitoring node is characterized in the form of decision boundaries, separating normal and abnormal space with operating data collected from the plant or by running virtual models of the plant. A set of ensemble state-space models are constructed for representing feature evolution in time-domain, where the ensembles are selected using Gaussian Mixture Model (GMM) clustering. The forecasted outputs are anticipated time-evolution of features, computed by applying an adaptive Kalman predictor to each ensemble model. The overall features forecast is then obtained through dynamic ensemble averaging. This is done by projecting evolution of feature vector to future times in a receding horizon fashion. The features forecast are compared to the decision boundary to estimate if/when the feature vectors will cross the boundary. Simulation results in a high fidelity GE gas turbine platform, show the effectiveness of our approach for forecasting abnormalities.

42 ENGINEERING↗