SEARCH · Engineering Papers

Results for “variational analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

All sources NASA NTRS DOE OSTI

NASA NTRS1937

Empirical corrections to the span load distribution at the tip

An analysis of existing pressure-distribution data was made to determine the variation of the tip loading with wing plan form. A series of empirical tip corrections was derived that may be added to theoretical curves in certain cases to obtain a closer approach to the actual loading at the tip. The analysis indicated that the need for a tip correction decreases as either the aspect ratio or the wing taper is increased. In general, it may be said that, for wings of conventional aspect ratio, corrections to the theoretical span load curves are necessary only if the wing is tapered less than 2:1 and has a blunt tip. If the tip is well rounded in plan form, no correction appears necessary even for a wing with no taper.

Pearson, H A↗

NASA NTRS1995

Using foreground/background analysis to determine leaf and canopy chemistry

Spectral Mixture Analysis (SMA) has become a well established procedure for analyzing imaging spectrometry data, however, the technique is relatively insensitive to minor sources of spectral variation (e.g., discriminating stressed from unstressed vegetation and variations in canopy chemistry). Other statistical approaches have been tried e.g., stepwise multiple linear regression analysis to predict canopy chemistry. Grossman et al. reported that SMLR is sensitive to measurement error and that the prediction of minor chemical components are not independent of patterns observed in more dominant spectral components like water. Further, they observed that the relationships were strongly dependent on the mode of expressing reflectance (R, -log R) and whether chemistry was expressed on a weight (g/g) or are basis (g/sq m). Thus, alternative multivariate techniques need to be examined. Smith et al. reported a revised SMA that they termed Foreground/Background Analysis (FBA) that permits directing the analysis along any axis of variance by identifying vectors through the n-dimensional spectral volume orthonormal to each other. Here, we report an application of the FBA technique for the detection of canopy chemistry using a modified form of the analysis.

Pinzon, J. E.↗

NASA NTRS1974

Effects of selected trajectory parameters on weight trends in the shuttle thermal protection system

An empirical heating model, thermal protection system unit weight correlation, and trajectory analysis were used to develop a computation procedure for studying the sensitivity of thermal protection system weights to variations in pertinent trajectory parameters. The analytical techniques used in developing this computer program are described. Application of the analysis to a Space Shuttle Orbiter configuration was performed to demonstrate gross thermal protection system weight trends with selected entry trajectory parameters.

Curry, D. M.↗

NASA NTRS2005

Algorithm for Identifying Erroneous Rain-Gauge Readings

An algorithm analyzes rain-gauge data to identify statistical outliers that could be deemed to be erroneous readings. Heretofore, analyses of this type have been performed in burdensome manual procedures that have involved subjective judgements. Sometimes, the analyses have included computational assistance for detecting values falling outside of arbitrary limits. The analyses have been performed without statistically valid knowledge of the spatial and temporal variations of precipitation within rain events. In contrast, the present algorithm makes it possible to automate such an analysis, makes the analysis objective, takes account of the spatial distribution of rain gauges in conjunction with the statistical nature of spatial variations in rainfall readings, and minimizes the use of arbitrary criteria. The algorithm implements an iterative process that involves nonparametric statistics.

Rickman, Doug↗

NASA NTRS2012

Methods of determining complete sensor requirements for autonomous mobility

A method of determining complete sensor requirements for autonomous mobility of an autonomous system includes computing a time variation of each behavior of a set of behaviors of the autonomous system, determining mobility sensitivity to each behavior of the autonomous system, and computing a change in mobility based upon the mobility sensitivity to each behavior and the time variation of each behavior. The method further includes determining the complete sensor requirements of the autonomous system through analysis of the relative magnitude of the change in mobility, the mobility sensitivity to each behavior, and the time variation of each behavior, wherein the relative magnitude of the change in mobility, the mobility sensitivity to each behavior, and the time variation of each behavior are characteristic of the stability of the autonomous system.

Curtis, Steven A.↗

NASA NTRS1976

Limb brightening on Uranus - The visible spectrum

Results are presented for pinhole and slit narrowband photoelectric area-scanning photometry of the Uranus disk at eight central wavelengths ranging from 5600 to 7500 A. The observations were undertaken to detect limb brightening on the planet and to study the nature of its disk profile as a function of geometrical albedo. A coarse analysis of the results shows that the disk must exhibit limb brightening in the two CH4 bands at 6190 and 7300 A relative to all other wavebands investigated. Except for the two CH4 bands, the shapes and widths of the images are found to be essentially identical; point-spread-function data for all wavebands indicate no significant variation in the representative Gaussian l/e width with wavelength. A fine analysis of the data reveals absolute limb brightening in the 7300-A CH4 band and absolute limb darkening in the adjacent wavebands. These results are shown to be consistent with the hypothesis that clouds are absent from the visible atmosphere of Uranus.

Price, M. J.↗

NASA NTRS1995

A reanalysis of the SWP-HI IUE observations of Capella

We have reanalyzed the numerous high-resolution, far-ultraviolet observations of Capella made by the International Ultraviolet Explorer (IUE) in its 16 yr lifetime. Our purpose was to search for long-term profile variations in Capella's ultraviolet emission lines and to complement the analysis of Goddard High Resolution Spectrograph (GHRS) observations of Capella, discussed in a companion paper (Linsky et al. 1995). We implemented a state-of-the-art photometric correction and spectral extraction procedure to improve S/N and control potential sources for systematic errors. Nevertheless, we were unable to find compelling evidence for any significant long-term profile variations. Previous work has shown that the G8 primary star is only a minor contributor to the high-excitation transition region lines but is a significant contributor to the low-excitation chromospheric lines. We have found exceptions to this rule, however. We find that the G8 star is responsible for a significant portion of Capella's N V lambda lambda 1239, 1243 emission, but is not a large contributor to the S I lambda 1296, Cl I lambda 1352, and O lambda 1356 lines. We suggest possible explanations for these behaviors. We also find evidence that the He II lambda 1640 emission from the G1 star is from the transition region, while the He II lambda 1640 emission from the G8 star is chromospheric, consistent with the findings of Linsky et al. (1994). The C II lambda 1336 line shows a weak central reversal. It is blueshifted by about 9 km/s with respect to the centroid of the emission from the G1 star. While the central reversal of the C II line is blueshifted by about 9 km/s with respect to the centroid of the emission from the G1 star. While the central reversal of the C II line is blueshifted, the central reversal of the Si III lambda 1207 line discussed by Linsky et al. (1994) is not.

Wood, Brian E.↗

NASA NTRS2004

Probabilistic Analysis of a SiC/SiC Ceramic Matrix Composite Turbine Vane

To demonstrate the advanced composite materials technology under development within the Ultra-Efficient Engine Technology (UEET) Program, it was planned to fabricate, test, and analyze a turbine vane made entirely of silicon carbide-fiber-reinforced silicon carbide matrix composite (SiC/SiC CMC) material. The objective was to utilize a five-harness satin weave melt-infiltrated (MI) SiC/SiC composite material developed under this program to design and fabricate a stator vane that can endure 1000 hours of engine service conditions. The vane was designed such that the expected maximum stresses were kept within the proportional limit strength of the material. Any violation of this design requirement was considered as the failure. This report presents results of a probabilistic analysis and reliability assessment of the vane. Probability of failure to meet the design requirements was computed. In the analysis, material properties, strength, and pressure loading were considered as random variables. The pressure loads were considered normally distributed with a nominal variation. A temperature profile on the vane was obtained by performing a computational fluid dynamics (CFD) analysis and was assumed to be deterministic. The results suggest that for the current vane design, the chance of not meeting design requirements is about 1.6 percent.

Murthy, Pappu L. N.↗

NASA NTRS1989

Influence of non steady gravity on natural convection during micro-gravity solidification of semiconductors. I - Time scale analysis. II - Implications for crystal growth experiments

Consideration is given to the influence of temporal variations in the magnitude of gravity on natural convection during unidirectional solidification of semiconductors. It is shown that the response time to step changes in g at low Rayleigh numbers is controlled by the momentum diffusive time scale. At higher Rayleigh numbers, the response time to increases in g is reduced because of inertial effects. The degree of perturbation of flow fields by transients in the gravitational acceleration on the Space Shuttle and the Space Station is determined. The analysis is used to derive the requirements for crystal growth experiments conducted on low duration low-g vehicles. Also, the effectiveness of sounding rockets and KC-135 aircraft for microgravity experiments is examined.

Griffin, P. R.↗

NASA NTRS2009

Systematics in the Electron Spectrum Measured by ATIC

An analysis of different parameters to separate electrons from protons in the ATIC experiment has been performed. Five separate discriminants were studied by different Monte Carlo programs, leading to a variety of results. Application to the ATIC data indicates the range of variation possible in the interpretation of the data. The results of this analysis, when compared with the published results [5], show good agreement in the most interesting region of energy (from 90 GeV to 600 GeV). The measured electron spectrum is compared with the recent data reported by Fermi/LAT, and there is no major disagreement between ATIC s results and Fermi/LAT. Finally, possible systematics-free, short energy scale features of the ATIC electron spectrum are mentioned. Keywords: ATIC, electron spectrum, fine structure

Panov, A. D.↗

NASA NTRS2017

Re-Organizing Earth Observation Data Storage to Support Temporal Analysis of Big Data

The Earth Observing System Data and Information System archives many datasets that are critical to understanding long-term variations in Earth science properties. Thus, some of these are large, multi-decadal datasets. Yet the challenge in long time series analysis comes less from the sheer volume than the data organization, which is typically one (or a small number of) time steps per file. The overhead of opening and inventorying complex, API-driven data formats such as Hierarchical Data Format introduces a small latency at each time step, which nonetheless adds up for datasets with O(10^6) single-timestep files. Several approaches to reorganizing the data can mitigate this overhead by an order of magnitude: pre-aggregating data along the time axis (time-chunking); storing the data in a highly distributed file system; or storing data in distributed columnar databases. Storing a second copy of the data incurs extra costs, so some selection criteria must be employed, which would be driven by expected or actual usage by the end user community, balanced against the extra cost.

data storage↗

NASA NTRS1982

The periodic variation of spokes in Saturn's rings

The discovery of a periodic variation in spoke activity in Saturn's rings from the analysis of Voyager images is reported. A Fourier power spectrum was computed using a data set generated by quantifying spoke activity observed on the morning (western) half of the rings in Voyager images spanning 5.5 days (about 12 Saturn rotations). A peak approximately 14 sigma above the noise in the frequency domain was found at a period of 621 + or - 22 min. Within the formal error, this value is consistent with the 639.4-min rotation period of Saturn's magnetic field. Maximum spoke activity is most likely to be observed on the morning half of the rings when a particular magnetic field sector coincides with this area. This magnetic sector contains the region which is aligned with local noon at the time of the emission of the SKR (Saturn kilometric radiation). These results suggest that the fundamental period of spoke variation is that of Saturn's magnetic field, and that spoke activity is associated with the region of the field which gives rise to the SKR. Passage of this region through Saturn's shadow may play a significant role in the creation and/or rejuvenation of spokes.

Porco, C. C.↗

NASA NTRS1985

Temporal characteristics of the solar UV flux and He I line at 1083 nm

It is pointed out that the solar UV flux in the 170- to 210-nm range is important because it photodissociates O2 in the terrestrial atmosphere and thereby initiates the production of ozone and other odd-oxygen chemistry in the stratosphere. The 210- to 290-nm solar UV flux heats the stratosphere. There is consequently a great interest in the temporal variations of the solar UV flux and its relation to ground-based measures of solar activity which may be useful in estimating the UV flux variations. The present investigation is concerned with daily values of 205-nm solar UV flux data measured with the aid of the Nimbus 7 satellite during the period from November 1978 to November 1982, taking into account also measurements of the equivalent width of the He I solar absorption line at 1083 at the National Solar Observatory. Attention is given to an analysis of the data, episodes of activity, and long-term variations.

Donnelly, R. F.↗

NASA NTRS1977

The effects of the atmospheric point-spread 'seeing' function on spatially resolved spectra of Jupiter

We present the results of an analysis of the effects of atmospheric seeing and of instrumental spectral and spatial resolution on the observed variation of absorption-line profiles across the disk of Jupiter. The technique described may be applied equally well to the analysis of observations of any extended astronomical source. These results show the necessity of obtaining accurate point-spread-function information during the course of observations of this nature. We also point out that in order to avoid the uncertainties and ambiguities inherent in attempts at deconvolution of observational data, one must properly convolve the appropriate spatial and spectral resolution functions with the models being tested and then compare the results with the observational data.

Gelfand, J.↗

NASA NTRS1991

Spacecraft design optimization using Taguchi analysis

The quality engineering methods of Dr. Genichi Taguchi, employing design of experiments, are important statistical tools for designing high quality systems at reduced cost. The Taguchi method was utilized to study several simultaneous parameter level variations of a lunar aerobrake structure to arrive at the lightest weight configuration. Finite element analysis was used to analyze the unique experimental aerobrake configurations selected by Taguchi method. Important design parameters affecting weight and global buckling were identified and the lowest weight design configuration was selected.

Unal, Resit↗

NASA NTRS1985

Fabrication and analysis of dot junction silicon solar cells

A design of solar cells with reduced junction area on the cell surface is investigated for reduction of saturation current and increase in open-circuit voltage. Equidiameter dot junctions distributed across the surface of the cell offer an efficient alternative, with variations in dot diameter and in the spacing between dots giving the required variations in the ratio of junctions area to total surface area. A simplified analysis for short-circuit current and other cell parameters, which enables cell design optimization, is presented. Efficiencies beyond 18 percent are obtainable in flat-plate terrestrial applications. Experimental solar-cell performance results, as functions of different area ratios, and bulk doping are presented. It is shown that saturation current reduction and open-circuit voltage increase is obtained by reduced junction area.

Crotty, G. T.↗

NASA NTRS2014

Stability Assessment and Tuning of an Adaptively Augmented Classical Controller for Launch Vehicle Flight Control

Recently, a robust and practical adaptive control scheme for launch vehicles [ [1] has been introduced. It augments a classical controller with a real-time loop-gain adaptation, and it is therefore called Adaptive Augmentation Control (AAC). The loop-gain will be increased from the nominal design when the tracking error between the (filtered) output and the (filtered) command trajectory is large; whereas it will be decreased when excitation of flex or sloshing modes are detected. There is a need to determine the range and rate of the loop-gain adaptation in order to retain (exponential) stability, which is critical in vehicle operation, and to develop some theoretically based heuristic tuning methods for the adaptive law gain parameters. The classical launch vehicle flight controller design technics are based on gain-scheduling, whereby the launch vehicle dynamics model is linearized at selected operating points along the nominal tracking command trajectory, and Linear Time-Invariant (LTI) controller design techniques are employed to ensure asymptotic stability of the tracking error dynamics, typically by meeting some prescribed Gain Margin (GM) and Phase Margin (PM) specifications. The controller gains at the design points are then scheduled, tuned and sometimes interpolated to achieve good performance and stability robustness under external disturbances (e.g. winds) and structural perturbations (e.g. vehicle modeling errors). While the GM does give a bound for loop-gain variation without losing stability, it is for constant dispersions of the loop-gain because the GM is based on frequency-domain analysis, which is applicable only for LTI systems. The real-time adaptive loop-gain variation of the AAC effectively renders the closed-loop system a time-varying system, for which it is well-known that the LTI system stability criterion is neither necessary nor sufficient when applying to a Linear Time-Varying (LTV) system in a frozen-time fashion. Therefore, a generalized stability metric for time-varying loop=gain perturbations is needed for the AAC.

VanZwieten, Tannen↗

NASA NTRSDate not supplied

Uncertainty Quantification and Sensitivity Analysis in Process-Structure-Property Simulations for Laser Powder Bed Fusion Additive Manufacturing

Process variations and process-induced defects like porosity cause significant uncertainty in the microstructure and mechanical behavior of additively manufactured metals. Establishing process-structure-property (PSP) relationships and quantifying uncertainty using experiments alone is costly, especially for structural applications where mechanical allowables must be established for qualification and certification. This work presents a PSP simulation framework for laser powder bed fusion with a focus on uncertainty quantification through probabilistic calibration and multi-fidelity uncertainty propagation. Motivated by phenomenological input parameters related to grain nucleation and growth that are difficult to characterize, a global sensitivity analysis (GSA) is completed. Through GSA, the most important input parameters are identified based on their influence on the statistical distributions of microstructural metrics that influence mechanical behavior, including grain size, morphology, and crystallographic texture. The results provide insight on what experiments are necessary to quantify and control PSP uncertainties, particularly those associated with the more challenging input parameters.

additive manufacturing↗