Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Using Active Learning to Rapidly Develop Machine Learned Diffusion Coefficients of CO 2 Conversion Reagents in Metal–Organic Frameworks

Here, we used a combined molecular dynamics/active learning (AL) approach to create machine learning models that can predict the diffusion coefficient of epichlorohydrin and chloropropene carbonate, the reactant and product of a common CO 2 cycloaddition reaction, in metal–organic frameworks (MOFs). Nanoporous MOFs are effective catalysts for the cycloaddition of CO 2 to epoxides. The diffusion rates within nanoporous catalysts can control the rate of reaction as the reactants and products must diffuse to the active sites within the MOF and then out of the nanoporous material for reusability. However, the diffusion process is routinely ignored when searching for new materials in catalytic applications. Here we verified improvement during the AL process by consistently tracking metrics on the same groups of MOFs to ensure consistency. Metal identity was found to have little impact on diffusion rates, while structural features like pore limiting diameter act as a threshold where a minimum value is needed for high diffusion rates. We identified the MOFs with the highest epichlorohydrin and chloropropene carbonate diffusion coefficients which can be used for further studies of reaction energetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determining the Conformation of Supported Complexes Using an 17 O TEDOR-like NMR Experiment

Dynamic nuclear polarization surface-enhanced nuclear magnetic resonance (NMR) spectroscopy has enabled the determination of the three-dimensional configuration of surface sites, in particular supported metal complexes of relevance to single-site heterogeneous catalysis. These approaches have chiefly leveraged the application of NMR double-resonance experiments that either reveal the complex conformation via point-to-point intramolecular distances between spin-labeled atoms or the complex-surface orientation via distances between the spins and the surface plane. Either method typically requires expensive isotope labeling and each reports on different structural features. The application of an experiment that simultaneously reveals both types of distances with chemical resolution would be ideal. Here, in this article, we describe an 17 O{ 1 H} pseudo-3D correlation experiment that achieves this goal. Specifically, Si–O–Si and Si–O–M oxygens are well-resolved by 17 O NMR; therefore, distances can be simultaneously measured radially, between Si– 17 O–M and the 1 H’s of the ligands, and vertically to the Si– 17 O–Si linkages of the silica support. We demonstrate the experiment using supported yttrium and zirconium complexes. Good agreement is obtained when comparing the experimental results to theoretical predictions from density functional theory calculations, highlighting the reliability of this relatively simple experiment.

alkyls↗

Identifying the Unique Properties of α-Bi 2 Mo 3 O 12 for the Activation of Propene

In order to understand the remarkable activity of α-Bi 2 Mo 3 O 12 for selective oxidation and ammoxidation of propene, the propene activation ability of four molybdenum-based mixed metal oxides - Bi 2 Mo 3 O 12 , PbMoO 4 , Bi 2 Pb 5 Mo 8 O 32 , and MoO 3 - was investigated using density functional theory. Propene activation is considered to occur via abstraction of a hydrogen atom from the methyl group of physisorbed propene by lattice oxygen. For each material, the apparent activation energy was estimated by summing the heat of adsorption of propene, the C-H bond dissociation energy, and the hydrogen attachment energy (HAE) for hydrogen addition to lattice oxygen; this sum provides a lower bound for the apparent activation energy. It was found that two structural features of oxide surfaces are essential to achieve low activation barriers: under-coordinated surface cation sites enable strong propene adsorption, and suitable 5- or 6-coordinate geometries at molybdenum result in favorable HAEs. The impact of molybdenum coordination on HAE was elucidated by carrying out a molecular orbital analysis using a cluster model of the molybdate unit. This effort revealed that, in 5- and 6-coordinate molybdates, oxygen donor atoms trans to molybdenyl oxo atoms destabilize the molybdate prior to H addition but stabilize the molybdate after H addition, thereby providing an HAE ~15 kcal/mol more favorable than that on 4-coordinate molybdate oxo atoms. Bi 3+ cations in Bi 2 Mo 3 O 12 thus promote catalytic activity by providing both strong adsorption sites for propene and forcing molybdate into 5-coordinate geometries that lead to particularly favorable values of the HAE. (Graph Presented).

36 MATERIALS SCIENCE↗

High-Yield Synthesis and Optical Properties of Carbon Nanotube Porins

Carbon nanotube porins (CNTPs) are a convenient membrane-based model system for studying nanofluidic transport that replicates a number of key structural features of biological membrane channels. We present a generalized approach for CNTP synthesis using sonochemistry-assisted segmenting of carbon nanotubes. Prolonged tip sonication in the presence of lipid molecules debundles and fragments long carbon nanotube aggregates into stable and water-soluble individual CNTPs with lengths in the range 5–20 nm. We discuss the main parameters that determine the efficiency and the yield of this process, describe the optimized conditions for high-yield CNTP synthesis, and demonstrate that this methodology can be adapted for synthesis of CNTPs of different diameters. We also present the optical properties of CNTPs and show that a combination of Raman and UV–vis–NIR spectroscopy can be used to monitor the quality of the CNTP synthesis. Altogether, CNTPs represent a versatile nanopore building block for creating higher-order functional biomimetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-Nanoflake Photo-Electrochemistry Reveals Champion and Spectator Flakes in Exfoliated MoSe 2 Films

Semiconducting transition-metal dichalcogenide (TMD) nanoflake thin films are promising large-area electrodes for photo-electrochemical solar energy conversion applications. However, their energy conversion efficiencies are typically much lower than those of bulk electrodes. It is unclear to what extent this efficiency gap stems from differences among nanoflakes (e.g., area, thickness, and surface structural features). It is also unclear whether individual exfoliated nanoflakes can achieve energy conversion efficiencies similar to those of bulk crystals. Here, we use a single-nanoflake photo-electrochemical approach to show that there are both highly active and completely inactive nanoflakes within a film. For the exfoliated MoSe 2 samples studied herein, 7% of nanoflakes are highly active champions, whose photocurrent efficiency exceeds that of the bulk crystal. However, 66% of nanoflakes are inactive spectators, which are mostly responsible for the overall lower photocurrent efficiency compared to the bulk crystal. The photocurrent collection efficiency increases with nanoflake area and decreases more at perimeter edges than at interior step edges. These observations, which are hidden in ensemble-level measurements, reveal the underlying performance issues of exfoliated TMD electrodes for photo-electrochemical energy conversion applications.

14 SOLAR ENERGY↗

Deconstructing Chirality: Probing Local and Nonlocal Effects in Azobenzene Derivatives with X-ray Circular Dichroism

Resolving molecular chirality on the atomic scale remains a critical challenge in chemistry. Conventional Optical Circular Dichroism spectroscopy often overlooks subtle and localized structural features. Here, we computationally investigate site-specific X-ray circular dichroism (XCD) across a series of trans-azobenzene derivatives to deconstruct and interpret chiroptical signals at the atomic level. Our modeling reveals that XCD is capable of distinguishing dichroic contributions arising from both a local chiral center and a global molecular twist, revealing their intricate interplay and potential for constructive or destructive interference. We show that sterically induced global distortions can dominate the XCD signal in some cases, even suppressing the response from the chiral center itself. This insight suggests a new molecular design principle for tuning the chiroptical activity, which we extend by proposing strategies to achieve unidirectional photoisomerization through steric gearing. Altogether, this work establishes a quantitative framework for engineering chiroptical responses, laying the foundation for the design of functional chiral systems utilizing principles of unidirectional molecular motor-like conformational dynamics.

X-ray spectroscopy↗

Effect of Tethering Anions in Block Copolymer Electrolytes via Molecular Dynamics Simulations

Ion-containing block copolymers (BCPs) are promising solid-state electrolytes as they can combine ion conduction and mechanical robustness via multiple microphases. However, salt-doped BCPs can have low ion conduction and transference number. One strategy to increase transference number is to tether anions to the polymer backbone (creating a single-ion conductor), though this may impact cation mobility. Leveraging coarse-grained molecular dynamics simulations, we compare the effects of ion concentration and polymer dielectric constant on BCPs with and without bonding anions to the chain (without changing any other chemical properties). We find that single-ion BCPs have higher cation conductivity than analogous salt-doped BCPs, especially at moderate ion concentrations. Furthermore, we also compare several structural features of these systems; notably, tethering anions causes the ions to spread more evenly throughout the conducting phase, which is related to improved cation conduction.

25 ENERGY STORAGE↗

Emerged Metallicity in Molecular Ferromagnetic Wires

Supramolecular engineering bridges molecular assembly with macromolecular charge-transfer salts, promising the design to construct supramolecular architectures that integrate cooperative properties difficult or impossible to find in conventional lattices. Here, we report the crystal engineering design and kinetic growth of one-dimensional supramolecular wires composed of bis(ethylenedithio)tetrathiafulvalene (ET + ) cation and polymeric Cu[N(CN) 2 ] 2 – anion. A bulk ferromagnetic order is discovered for filling up the gap where strong ferromagnetism is missing in such ET molecule-based charge-transfer salts. Metallicity is induced by electric current from the semiconducting wire, which is attributed to strain effect by tuning its close molecular contact. This structural feature is evidenced through the combination of various mechanistic spectroscopic studies. Further, electric dipole is established from the close molecular contacts and is suggestive to stabilize ferromagnetic spin interaction through anions bridging spin sites. The breakthrough shown here provides a pathway to explore low-dimensional supramolecular materials exhibiting strong electron correlation, metallicity, and ferromagnetism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Vertically oriented arrays of ReS 2 nanosheets for electrochemical energy storage and electrocatalysis

Here, transition-metal dichalcogenide (TMD) nanolayers show potential as high-performance catalysts in energy conversion and storage devices. Synthetic TMDs produced by chemical-vapor deposition (CVD) methods tend to grow parallel to the growth substrate. Here, we show that with the right precursors and appropriate tuning of the CVD growth conditions, ReS 2 nanosheets can be made to orient perpendicular to the growth substrate. This accomplishes two important objectives; first, it drastically increases the wetted or exposed surface area of the ReS 2 sheets, and second, it exposes the sharp edges and corners of the ReS 2 sheets. We show that these structural features of the vertically grown ReS 2 sheets can be exploited to significantly improve their performance as polysulfide immobilizers and electrochemical catalysts in lithium–sulfur (Li–S) batteries and in hydrogen evolution reactions (HER). After 300 cycles, the specific capacity of the Li–S battery with vertical ReS 2 catalyst is retained above 750 mA h g –1 , with only ~0.063% capacity decay per cycle, much better than the baseline battery (without ReS 2 ), which shows ~0.184% capacity decay per cycle under the same test conditions. As a HER catalyst, the vertical ReS 2 provides very small onset overpotential (<100 mV) and an exceptional exchange-current density (~67.6 μA/cm 2 ), which is vastly superior to the baseline electrode without ReS 2 .

2D materials↗

Electrochemical and Chemical Reactivities of Titanium Oxide-Based Materials with a Chloroaluminate Ionic Liquid Electrolyte for Aluminum Batteries

Here, by selecting three different types of electrode materials, we intended to better understand the Al 3+ intercalation chemistry of titanium oxide-based frameworks with an acidic chloroaluminate electrolyte. In agreement with previous reports, we confirmed that the native interstitial sites of anatase TiO 2 are less prone to accommodate Al 3 + than Li + or Na + ions, while introducing cationic vacancies largely increases the electrochemical storage capacity. Upon the first cycle, the highest reversible capacity, up to 277 mAh/g, was obtained for a hydrated layered structure featuring cationic vacancies. Total scattering data showed that the insertion of Al 3+ ions induced a strong distortion of the framework. In addition, combined 27 Al MAS NMR and DFT calculations revealed that in oxy-hydroxylated vacant sites, the coordination mode of Al 3+ ions depends on the arrangement of anions around vacancies inducing the occurrence of 4-, 5-, and 6-fold coordination modes. Further cycling experiments revealed a progressive capacity fading for all electrode materials. Using cyclic voltammetry on the used electrolyte, we evidenced that a partial dissolution has occurred, which is more pronounced for the layered hydrate compound, and that solubilized species are electrochemically active, giving rise to specific signatures in both CVs and galvanostatic experiments. Raman spectroscopy enabled us to characterize these species, which are derived from the Ti-Cl system. The solubilized species, however, eventually precipitated, as shown by a purple deposit observed on the separator and tentatively assigned to TiCl 3 , known to be insoluble in this medium. By providing further information on the Al 3+ intercalation chemistry and a better understanding of the electrochemical and chemical reactivities of electrode materials, this work will enable progress to be made in the development of aluminum-ion batteries.

Al3+-ion insertion chemistry↗

Reversible Interlayer Sliding and Conductivity Changes in Adaptive Tetrathiafulvalene-Based Covalent Organic Frameworks

Ordered interlayer stacking is intrinsic in two-dimensional covalent organic frameworks (2D COFs) and has strong implications on COF's optoelectronic properties. Reversible interlayer sliding, corresponding to shearing of 2D layers along their basal plane, is an appealing dynamic control of both structures and properties, yet it remains unexplored in the 2D COF field. In this paper, we demonstrate that the reversible interlayer sliding can be realized in an imine-linked tetrathiafulvalene (TTF)-based COF TTF-DMTA. The solvent treatment induces crystalline phase changes between the proposed staircase-like sql net structure and a slightly slipped eclipsed sql net structure. The solvation-induced crystallinity changes correlate well with reversible spectroscopic and electrical conductivity changes as demonstrated in oriented COF thin films. In contrast, no reversible switching is observed in a related TTF-TA COF, which differs from TTF-DMTA in terms of the absence of methoxy groups on the phenylene linkers. This work represents the first 2D COF example of which eclipsed and staircase-like aggregated states are interchangeably accessed via interlayer sliding, an uncharted structural feature that may enable applications such as chemiresistive sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth and Performance of High-Quality SWCNT Forests on Inconel Foils as Lithium-Ion Battery Anodes

Large-scale production of vertically aligned single-walled carbon nanotubes (VA-SWCNTs) on metal foils promises to enable technological advancements in many fields, from functional composites to energy storage to thermal interfaces. In this work, we demonstrate growth of high-quality (G/D > 6, average diameters ~ 2–3 nm, densities > 10 12 cm –2 ) VA-SWCNTs on Inconel metal for use as a lithium-ion battery (LIB) anode. Scale-up of SWCNT growth on Inconel 625 to 100 cm 2 exhibits nearly invariant CNT structural properties, even when synthesis is performed near atmospheric pressure, and this robustness is attributed to a growth kinetic regime dominated by the carbon precursor diffusion in the bulk gas mixture. SWCNT forests produced on large-area metal substrates at close to atmospheric pressure possess a combination of structural features that are among the best demonstrated so far in the literature for growth on metal foils. Leveraging these achievements for energy applications, we demonstrate a VA-SWCNT LIB anode with capacity >1200 mAh/g at 1.0C and stable cycling beyond 300 cycles. Furthermore, this robust synthesis of high-quality VA-SWCNTs on metal foils presents a promising route toward mass production of high-performance CNT devices for a broad range of applications.

Energy↗

Phase-field based Multiscale Modeling of Heterogeneous Solid Electrolytes: Applications to Nanoporous Li 3 PS 4

Modeling the effective ion conductivities of heterogeneous solid electrolytes typically involves the use of a computer-generated microstructure consisting of randomly or uniformly oriented fillers in a matrix. But, the structural features of the filler/matrix interface, which critically determine the interface ion conductivity and the microstructure morphology, have not been considered during the microstructure generation. In using nanoporous β-Li 3 PS 4 electrolyte as an example, we develop a phase-field model that enables generating nanoporous microstructures of different porosities and connectivity patterns based on the depth and the energy of the surface (pore/electrolyte interface), both of which are predicted through density functional theory (DFT) calculations. Room-temperature effective ion conductivities of the generated microstructures are then calculated numerically, using DFT-estimated surface Li-ion conductivity (3.14×10 -3 S/cm) and experimentally measured bulk Li-ion conductivity (8.93×10 -7 S/cm) of β-Li 3 PS 4 as the inputs. We also use the generated microstructures to inform effective medium theories to rapidly predict the effective ion conductivity via analytical calculations. Furthemore, when porosity approaches the percolation threshold, both the numerical and analytical methods predict a significantly enhanced Li-ion conductivity (1.74×10 -4 S/cm) that is in good agreement with experimental data (1.64×10 -4 S/cm). The present phase-field based multiscale model is generally applicable to predict both the microstructure patterns and the effective properties of heterogeneous solid electrolytes.

36 MATERIALS SCIENCE↗

Three-Dimensional Graphene–Carbon Nanotube–Ni Hierarchical Architecture as a Polysulfide Trap for Lithium–Sulfur Batteries

We report that despite their high energy density and affordable cost compared to lithium-ion (Li-ion) batteries, lithium-sulfur (Li-S) batteries still endure from slow reaction kinetics and capacity loss induced by the insulating sulfur and severe polysulfide diffusion. To address these issues, we report here nickel nanoparticles filled in vertically grown carbon nanotubes on graphene sheets (graphene-carbon nanotube-nickel composite (Gr-CNT-Ni)) that are coated onto a polypropylene separator as a polysulfide trap for the construction of high-loading sulfur cathodes. The hierarchical porous framework of Gr-CNT physically entraps and immobilizes the active material sulfur, while the strong chemical interaction with Ni nanoparticles in Gr-CNT-Ni inhibits polysulfide diffusion. The covalently interconnected electron conduction channels and carbon shell-confined metal active sites provide feasible paths for the continual regeneration of active material during the charge/discharge process. Benefitting from these novel morphological and structural features, the Li-S cell with the Gr-CNT-Ni as a polysulfide trap demonstrates high specific capacity and good cycle life. Lastly, this work provides new avenues for synergistically combining the advantages of hierarchical porous carbon architectures and metal active sites for the development of high-performance cathodes for Li-S batteries.

25 ENERGY STORAGE↗

Expanding Interlayer Spacing of Hard Carbon by Natural K + Doping to Boost Na-Ion Storage

Heteroatom-doped carbon is an attractive material for anodes in lithium/sodium ion batteries as a replacement for the traditional graphite anodes. However, the complex fabrication process and high-cost force these carbon materials far from the practical applications. Here we report a low-cost, natural potassium-doped carbon material, which is directly carbonized from the coconut endocarp – a kind of the high-potassium contained biomass materials. The obtained carbon structure features an expanded d(002)-spacing (0.4 nm) originating from the super-high potassium content (6654 mg kg-1). Because of the improvement on charge transfer kinetics and electrical properties, the potassium-doped carbon anode exhibits promising electrochemical performance in sodium ion batteries, including high initial reversible capacity (314 mAh g-1) and good cycle stability (289 mAh g-1 after 200 cycles). Additionally, this work opens up a new approach for the design of heteroatom-doped carbon materials from the view of the natural environmental friendly.

Wu, Feng↗

Highly Stable Luminous “Snakes” from CsPbX 3 Perovskite Nanocrystals Anchored on Amine-Coated Silica Nanowires

CsPbX 3 (X = Cl, Br, and I) perovskite nanocrystals (NCs) are known for their exceptional optoelectronic properties, yet the material's instability toward polar solvents, heat, or UV irradiation greatly limits its further applications. Herein, an efficient in situ growing strategy has been developed to give highly stable perovskite NC composites (abbreviated CsPbX 3 @CA-SiO 2 ) by anchoring CsPbX 3 NCs onto silica nanowires (NWs), which effectively depresses the optical degradation of their photoluminescence (PL) and enhances stability. The preparation of surface-functionalized serpentine silica NWs is realized by a sol-gel process involving hydrolysis of a mixture of tetraethyl orthosilicate (TEOS), 3-aminopropyltriethoxysilane (APTES), and trimethoxy(octadecyl)silane (TMODS) in a water/oil emulsion. The serpentine NWs are formed via an anisotropic growth with lengths up to 8 μm. The free amino groups are employed as surface ligands for growing perovskite NCs, yielding distributed monodisperse NCs (~8 nm) around the NW matrix. The emission wavelength is tunable by simple variation of the halide compositions (CsPbX 3 , X = Cl, Br, or I), and the composites demonstrate a high photoluminescence quantum yield (PLQY 32-69%). Additionally, we have demonstrated the composites CsPbX 3 @CA-SiO 2 can be self-woven to form a porous 3D hierarchical NWs membrane, giving rise to a superhydrophobic surface with hierarchical micro/nano structural features. The resulting composites exhibit high stability toward water, heat, and UV irradiation. Finally, this work elucidates an effective strategy to incorporate perovskite nanocrystals onto functional matrices as multifunctional stable light sources.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Highly Ordered Mesoporous Bimetallic Phosphides as Efficient Oxygen Evolution Electrocatalysts

Oxygen evolution from water using earth abundant transition metal based catalysts is of importance for the commercialization of water electrolyzer. Herein, we report a novel hard templating method to synthesize transition metal phosphides with uniform shape and size. By virtue of the structural feature, synergistic effect among metals and the in situ formed active species, the as-prepared phosphides with optimized composition present enhanced electrocatalytic performance towards oxygen evolution reaction in alkaline solution. In details, the most efficient catalyst reaches a current density of 10 mA/cm2 at a potential of 1.511 V vs reversible hydrogen electrode, which is much lower than that of commercial RuO2 catalyst. Our work offers a new strategy to optimize the catalysts for water splitting by controlling the morphology and composition.

Environmental Molecular Sciences Laboratory↗

Molecular Dynamics Investigation of the Relaxation Mechanism of Entangled Polymers after a Large Step Deformation

The chain retraction hypothesis of the tube model for nonlinear polymer rheology has been challenged by the recent small-angle neutron scattering (SANS) experiment. In this study, we further examine the microscopic relaxation mechanism of entangled polymer melts after a large step uniaxial extension by using large-scale molecular dynamics simulation. We show that the unique structural features associated with the chain retraction mechanism of the tube model are absent in our simulations, in agreement with the previous experimental results. In contrast to SANS experiments, molecular dynamics simulations allow us to accurately and unambiguously determine the evolution of the radius of gyration tensor of a long polymer chain after a large step deformation. Contrary to the prediction of the tube model, our simulations reveal that the radius of gyration in the perpendicular direction to stretching increases monotonically toward its equilibrium value throughout the stress relaxation. These results provide a critical step in improving our understanding of nonlinear rheology of entangled polymers.

36 MATERIALS SCIENCE↗