Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Electrostatic waves due to field-aligned electron beams in the low-latitude boundary layer

Mass-resolved ion, electron, and plasma wave data obtained from several low-latitude boundary layer (LLBL) crossings by the AMPTE CCE satellite are analyzed. The data clearly separate the LLBL from the adjacent magnetosheath and magnetosphere. Attention was focused on wave-particle interactions involving electrons. Electron beams were found to be present in the LLBL during the southward interplanetary magnetic field, along with a simultaneous enhancement of electrostatic waves with parallel polarization. Linear theory analysis shows that for plasma conditions in the LLBL, electron beams are unstable to electrostatic waves that propagate parallel to the local magnetic field, in agreement with observations. A numerical simulation study of the beam-plasma interaction in the LLBL shows that the instability saturates by thermalization of the beam but that a beamlike structure can still remain in the electron distribution for certain initial parameters. It is suggested that peaks in the electron velocity distribution function may be found in the LLBL away from the beam source region.

Peroomian, V.↗
NASA NTRS1995

Low altitude signature of the plasma sheet boundary layer: Observations and model

Low-altitude spacecraft on magnetotail field lines often detect a distinctive signature in the precipitating ion flux. A velocity-dispersed ion structure is often observed near the poleward boundary of the auroral oval. At the low-latitude edge of this structure an absence of precipitating ions is seen, previously referred to as 'the gap,' separating the velocity -- dispersed ions at the higher latitudes from the more diffuse, plasma sheet-like ions at lower latitudes. We present a model of low-altitude particle precipitation that reproduces these observed features in the ion spectra and provides a quantitative estimate of the downtail plasma sheet properties. The model calculations are compared with observations from the Akebono spacecraft. In this model, the dispersed ion velocity signature maps to a region in the distant plasma sheet where the plasma has a field-aligned bulk flow. The gap maps to a region in the distant magnetotail where the ion fluxes are below the detection threshold of the instrument, due to the low plasma sheet density and temperature in that region.

Onsager, T. G.↗
NASA NTRS1996

Kinetics of Cyclic Oxidation and Cracking and Finite Element Analysis of MA956 and Sapphire/MA956 Composite System

Sapphire fiber-reinforced MA956 composites hold promise for significant weight savings and increased high-temperature structural capability, as compared to unreinforced MA956. As part of an overall assessment of the high-temperature characteristics of this material system, cyclic oxidation behavior was studied at 1093 C and 1204 C. Initially, both sets of coupons exhibited parabolic oxidation kinetics. Later, monolithic MA956 exhibited spallation and a linear weight loss, whereas the composite showed a linear weight gain without spallation. Weight loss of the monolithic MA956 resulted from the linking of a multiplicity of randomly oriented and closely spaced surface cracks that facilitated ready spallation. By contrast, cracking of the composite's oxide layer was nonintersecting and aligned nominally parallel with the orientation of the subsurface reinforcing fibers. Oxidative lifetime of monolithic MA956 was projected from the observed oxidation kinetics. Linear elastic, finite element continuum, and micromechanics analyses were performed on coupons of the monolithic and composite materials. Results of the analyses qualitatively agreed well with the observed oxide cracking and spallation behavior of both the MA956 and the Sapphire/MA956 composite coupons.

Lee, Kang N.↗
NASA NTRS2011

3D Reconstruction of a Rotating Erupting Prominence

A bright prominence associated with a coronal mass ejection (CME) was seen erupting from the Sun on 9 April 2008. This prominence was tracked by both the Solar Terrestrial Relations Observatory (STEREO) EUVI and COR1 telescopes, and was seen to rotate about the line of sight as it erupted; therefore, the event has been nicknamed the "Cartwheel CME." The threads of the prominence in the core of the CME quite clearly indicate the structure of a weakly to moderately twisted flux rope throughout the field of view, up to heliocentric heights of 4 solar radii. Although the STEREO separation was 48 deg, it was possible to match some sharp features in the later part of the eruption as seen in the 304 Angstrom line in EUVI and in the H alpha-sensitive bandpass of COR1 by both STEREO Ahead and Behind. These features could then be traced out in three dimensional space, and reprojected into a view in which the eruption is directed towards the observer. The reconstructed view shows that the alignment of the prominence to the vertical axis rotates as it rises up to a leading-edge height of approximately equals 2.5 solar radii, and then remains approximately constant. The alignment at 2.5 solar radii differs by about 115 deg. from the original filament orientation inferred from H alpha and EUV data, and the height profile of the rotation, obtained here for the first time, shows that two thirds of the total rotation is reached within approximately equals 0.5 solar radii above the photosphere. These features are well reproduced by numerical simulations of an unstable moderately twisted flux rope embedded in external flux with a relatively strong shear field component.

Thompson, W. T.↗
NASA NTRS2011

Observations and Effects of Dipolarization Fronts Observed in Earth's Magnetotail

Dipolarization fronts in Earth's magnetotail are characterized by sharp jumps in magnetic field, a drop in density, and often follow earthward fast plasma flow. They are commonly detected near the equatorial plane of Earth s tail plasma sheet. Sometimes, but not always, dipolarization fronts are associated with global substorms and auroral brightenings. Both Cluster, THEMIS, and other spacecraft have detected dipolarization fronts in a variety of locations in the magnetotail. Using multi-spacecraft analyses together with simulations, we have investigated the propagation and evolution of some dipolarization events. We have also investigated the acceleration of electrons and ions that results from such magnetic-field changes. In some situations, the velocities of fast earthward flows are comparable to the Alfven speed, indicating that the flow bursts might have been generated by bursty reconnection that occurred tailward of the spacecraft. Based on multi-spacecraft timing analysis, dipolarization fronts are found to propagate mainly earthward at 160-335 km/s and have thicknesses of ~900-1500 km, which corresponds to the ion inertial length or gyroradius scale. Following the passage of dipolarization fronts, significant fluctuations are observed in the x and y components of the magnetic field. These peaks in the magnetic field come approximately 1-2 minutes after passage of the dipolarization front. These Bx and By fluctuations propagate primarily dawnward and earthward. Field-aligned electron beams are observed coincident with those magnetic field fluctuations. Non-Maxwellian electron and ion distributions are observed that are associated with the dipolarization that may be unstable to a range of electrostatic and/or whistler instabilities. Enhanced electrostatic broadband noise at frequencies below and near the lower-hybrid frequency is also observed at or very close to these fronts. This broadband noise is thought to play a role in further energizing the particles. Such studies provide insights into the particle acceleration mechanisms associated with substorm dipolarization, and, in turn, the effects of those acceleration mechanisms on the structure and evolution of dipolarization fronts.

Goldstein, Melvyn L.↗
NASA NTRS1991

Tectonic setting of Martian volcanoes and deep-seated intrusives

More than 50 volcanoes have been mapped on Mars, and recent geologic studies indicate structural evidence of deep seated intrusive bodies. Most volcanoes in the Tharsis region are volcanotectonic features; they have been associated with large scale tectonic and volcanic processes. They occur along complex systems of faults and grabens having a dominant northwest to southwest trend closely coincident with a great circle, which extends along 90 deg of arc from Tempe Patera to probable volcanic mountains near lat. 40 deg S, long. 150 deg. Deep seated intrusive bodies are also concentrated in the Tharsis region and are recognized mostly where faults have been deflected around their cores. The Elysium Mons-Amphitrites Patera volcanic alignment is subparallel to that of Tharsis but is longer, extending through about 120 deg of arc; it transects the dichotomy boundary and is radial to the Hellas basin. Volcanoes in the Tharsis region have the widest age range of all volcanoes on Mars, as determined by the size-frequency distribution of their craters having diameters of 2, 5, and 16 km.

Scott, David H.↗
NASA NTRS1994

The Transition Region And Coronal Explorer (TRACE)

The objectives and the characteristics of TRACE, selected as a NASA small explorer mission for development and flight in late 1997, is presented. The TRACE science investigation explores the connections between fine-scale magnetic fields and the associated plasma structures on the sun. The instrument collects images of solar plasmas at temperatures from 10(exp 4) to 10(exp 7) K, with an arc second spatial resolution and good temporal resolution and continuum. TRACE and SOHO will gather simultaneous, digital measurements of all temperature regimes of the solar atmospheric, in both high-resolution imaging and spectroscopy, and magnetogram to photosphere. The 30 cm aperture TRACE telescope uses three normal-incidence coatings for the extreme ultraviolet and one for the ultraviolet on quadrants of the primary and secondary mirrors. Interference filters isolate five different ultraviolet bands. The images are aligned and internally stabilized against spacecraft jitter. TRACE will be launched into a sun-synchronous orbit, allowing continuous observing for eight months of the baseline one-year mission. It will be operated in coordination with the SOHO experiment operations facility.

Tarbell, T. D.↗
NASA NTRSDate not supplied

WFIRST CGI: Prism and Polarizer Characterization Modes

As part of its technology demonstration, the WFIRST coronagraph instrument (CGI) will demonstrate point source spectroscopy and polarization measurements of disks. The specific implementation of spectroscopy is a zero-deviation Amici prism and slit to be placed on the planet after high contrast has been achieved by CGI. The polarization optics are a set of Wollaston prisms so that orthogonal polarization states can be measured simultaneously. The CGI spectral characterization mode, being designed and built and Goddard Space Flight Center (GSFC), has a spectral resolution of R50 and is designed to accommodate a 15% bandpass spanning 610-785nm. In order to recover Stokes information, there are two sets of Wollaston prisms clocked 45 degrees with respect to one another with each measurement taken in series. The Wollaston design and optical elements are a contribution by the Japanese Aerospace Exploration Agency, with final alignment and testing being done at GSFC. The spectroscopy mode is designed to target Methane absorption features around 730nm, keeping the spectral resolution as low as possible to improve the signal-to-noise ratio and hence reduce detection time. We highlight the requirements for these modes and address the challenge of on-orbit spectral calibration for a deployable slit in the presence of pointing drifts. Of unique interest is how the observatory error budget couples into good stellar spectrum calibration and subsequent speckle subtraction. We also provide further detail on the optomechanical design, its stability based on thermal and structural predictions, modeled performance, and operations concept. These performance metrics are simulated to demonstrate how a slit located at an arbitrary field point is homed onto the planet and converted to a calibrated spectrum.

Tyler D Groff↗
NASA NTRS2022

NASA’s Revised Planetary Protection Policy and Implementation

NASA has updated its planetary protection policy and implementation approach in response to advances in scientific understanding of solar system targets, upcoming mission opportuni-ties for exploration and sample return, and the private sector’s emerging capability to plan missions to Earth’s Moon and Mars. In September 2021, the NASA Procedural Requirements NPR 8715.24, entitled “Planetary Protection Provisions for Robotic Extraterrestrial Missions” was released which repositions planetary protection in existing NASA mission and program management structures, introduces risk-informed decision making, expands on key roles and responsibilities for both programmatic and the Oÿce of Safety and Mission Assurance, updates the categorization process and streamlines the planetary protection documentation approval and schedule. NASA is working on a more detailed technical standard to accompany NPR 8715.24 which will include the detailed technical requirements to address organic contamina-tion, inadvertent impact avoidance, biological control and management, end of mission disposal and restricted Earth-Return sample safety and assurance. This report to the COSPAR com-munity will describe the current NASA planetary protection policy and its alignment with the revised COSPAR planetary protection policy. NASA’s plans for updating the supporting “Handbook for Implementing Planetary Protection Technical Requirements” and future policies for addressing planetary protection of crewed missions will also be presented.

Elaine Seasly↗
NASA NTRS2007

Influence of the Convection Electric Field Models on Predicted Plasmapause Positions During Magnetic Storms

In the present work, we determine how three well documented models of the magnetospheric electric field, and two different mechanisms proposed for the formation of the plasmapause influence the radial distance, the shape and the evolution of the plasmapause during the geomagnetic storms of 28 October 2001 and of 17 April 2002. The convection electric field models considered are: Mcllwain's E51) electric field model, Volland-Stern's model and Weimer's statistical model compiled from low-Earth orbit satellite data. The mechanisms for the formation of the plasmapause to be tested are: (i) the MHD theory where the plasmapause should correspond to the last-closed- equipotential (LCE) or last-closed-streamline (LCS), if the E-field distribution is stationary or time-dependent respectively; (ii) the interchange mechanism where the plasmapause corresponds to streamlines tangent to a Zero-Parallel-Force surface where the field-aligned plasma distribution becomes convectively unstable during enhancements of the E-field intensity in the nightside local time sector. The results of the different time dependent simulations are compared with concomitant EUV observations when available. The plasmatails or plumes observed after both selected geomagnetic storms are predicted in all simulations and for all E-field models. However, their shapes are quite different depending on the E-field models and the mechanisms that are used. Despite the partial success of the simulations to reproduce plumes during magnetic storms and substorms, there remains a long way to go before the detailed structures observed in the EUV observations during periods of geomagnetic activity can be accounted for very precisely by the existing E-field models. Furthermore, it cannot be excluded that the mechanisms currently identified to explain the formation of "Carpenter's knee" during substorm events, will', have to be revised or complemented in the cases of geomagnetic storms.

Pierrard, V.↗
NASA NTRS2011

3D Reconstruction of a Rotating Erupting Prominence

A bright prominence associated with a coronal mass ejection (CME) was seen erupting from the Sun on 9 April 2008. This prominence was tracked by both the Solar Terrestrial Relations Observatory (STEREO) EUVI and COR1 telescopes, and was seen to rotate about the line of sight a it erupted; therefore, the event has been nicknamed the "Cartwheel CME." The threads of the prominence in the core of the CME quite clearly indicate the structure of a weakly to moderately twisted flux rope throughout the field of view, up to heliocentric heights of 4 solar radii. Although the STEREO separation was 48 deg, it was possible to match some sharp features in the later part of the eruption as seen in the 304 A line in EUVI and in the H-alpha-sensitive bandpass of COR I by both STEREO Ahead and Behind. These features could then be traced out in three-dimensional space, and reprojected into a view in which the eruption is directed toward the observer. The reconstructed view shows that the alignment of the prominence to the vertical axis rotates as it rises up to a leading-edge height of approximately equal to 2.5 solar radii, and then remains approximately constant. The alignment at 2.5 solar radii differs by about 115 deg from the original filament orientation inferred from H-alpha and EUV data, and the height profile of the rotation, obtained here for the first time, shows that two thirds of the total rotation are reached within approximately equal to 0.5 solar radii above the photosphere. These features are well reproduced by numerical simulations of an unstable moderately twisted flux rope embedded in external flux with a relatively strong shear field component.

Thompson, W. T.↗
NASA NTRS1979

Elevated-temperature application of the IITRI compression test fixture for graphite/polyimide filamentary composites

Seventy-nine graphite/polyimide compression specimens were tested to investigate experimentally the IITRI test method for determining compressive properties of composite materials at room and elevated temperatures (589 K (600 F)). Minor modifications were made to the standard IITRI fixture and a high degree of precision was maintained in specimen fabrication and load alignment. Specimens included four symmetric laminate orientations. Various widths were tested to evaluate the effect of width on measured modulus and strength. In most cases three specimens of each width were tested at room and elevated temperature and a polynomial regression analysis was used to reduce the data. Scatter of replicate tests and back-to-back strain variations were low, and no specimens failed by instability. Variation of specimen width had a negligible effect on the measured ultimate strengths and initial moduli of the specimens. Measured compressive strength and stiffness values were sufficiently high for the material to be considered a usable structural material at temperatures as high as 589 K (600 F).

Raju, B. B.↗
NASA NTRS2018

Predicting Global Ground Geoelectric Field With Coupled Geospace and Three-Dimensional Geomagnetic Induction Models

We forecast the global effects of space weather on the geoelectric and geomagnetic fields using a novel combination of methods. We use a realistic three-dimensional (3-D) model of Earth's electrical conductivity and a realistic representation of magnetospheric and ionospheric current systems. Our scheme involves the following steps: (1) We run a global magnetohydrodynamic model of the magnetosphere coupled to an electrostatic model of the ionosphere. (2) We calculate a global time series of the ground magnetic field resulting from the ionospheric, field-aligned, and magnetospheric currents of the global magnetohydrodynamic model. (3) We approximate this external field by an equivalent source current flowing in a thin shell above Earth. (4) We calculate a global time series of geoelectric and geomagnetic fields from the equivalent current and a 3-D conductivity model of Earth that also takes into account the coast effect due to large horizontal conductivity gradient. We verify our implementation by comparing the results against known analytic and numeric solutions, and then apply our scheme to the geomagnetic storm of 14 and 15 December 2006. In particular, we show that accounting for 3-D structure of Earth's conductivity results in significantly enhanced geoelectric field at large lateral gradients of conductivity, especially in coastal regions, both at middle and high latitudes. In the studied geomagnetic storm the largest values of 3-D geoelectric field are detected at high latitudes reaching 2.5 volts per kilometer and the 3-D effect extends inland by a few hundred kilometers.

Honkonen, I.↗
NASA NTRS1987

Studies of outer planet satellites, Mercury and Uranus

Arguments were made, based on geometry, for both an impact and an internal origin for the ancient, partially preserved furrow system of Ganymede. It was concluded that furrows were not concentric, but could be impact related if multiringed structures on icy satellites are initially noncircular. The geometry of the Valhalla ring structure on Callisto was examined in order to assess the circularity of an unmodified ring system. The Ganymede furrow system was remapped to make use of improvements in coordinate control. The least-squares center of curvature for all furrows in the Marius and Galileao Regio is -20.7, and 179.2 degrees. Furrows in Marius and Galileo Regio are reasonably concentric, and are much more circular than previously estimated. The perceived present nonalignment of the assumed originally concentric furrows were used to argue for large-scale lateral motion of dark terrain blocks in Ganymede's crust, presumably in association with bright terrain formation., The overall alignment of furrows as well as the inherent scatter in centers of curvature from subregions of Galileo and Marius do not support this hypothesis.

Mckinnon, William B.↗
NASA NTRS1995

The structure of the distanct geomagnetic tail during long periods of northward IMF

We have used a newly developed, parallelized, global MHD magnetosphere - ionosphere simulation model with a 400 R(sub E) long tail to study the evolution, structure, and dynamics of the distant magnetotail during extended periods of northward interplanetary magnetic field (IMF). We find that the tail evolves to a nearly time stationary structure about one solar wind transit time after the IMF turns northward. Four regions of different magnetic topology can be distinguished which extend at least to the end of the simulation box at 400 R(sub E). Besides lobe field lines and open solar wind field lines tailward of an X-line, there is a broad boundary layer of closed field lines which we call the tail flank boundary layer (TFBL). Just inside the TFBL there is a region of closed field loops. Besides the X-line we find two O-lines which are enclosed by the closed field loops and are roughly aligned with the tail axis. Together they form a U shaped separator between the northward and the southward plasma sheet fields.

Raeder, J.↗
NASA NTRS2015

Formation and Control of Fluidic Species

This invention generally relates to systems and methods for the formation and/or control of fluidic species, and articles produced by such systems and methods. In some cases, the invention involves unique fluid channels, systems, controls, and/or restrictions, and combinations thereof. In certain embodiments, the invention allows fluidic streams (which can be continuous or discontinuous, i.e., droplets) to be formed and/or combined, at a variety of scales, including microfluidic scales. In one set of embodiments, a fluidic stream may be produced from a channel, where a cross-sectional dimension of the fluidic stream is smaller than that of the channel, for example, through the use of structural elements, other fluids, and/or applied external fields, etc. In some cases, a Taylor cone may be produced. In another set of embodiments, a fluidic stream may be manipulated in some fashion, for example, to create tubes (which may be hollow or solid), droplets, nested tubes or droplets, arrays of tubes or droplets, meshes of tubes, etc. In some cases, droplets produced using certain embodiments of the invention may be charged or substantially charged, which may allow their further manipulation, for instance, using applied external fields. Non-limiting examples of such manipulations include producing charged droplets, coalescing droplets (especially at the microscale), synchronizing droplet formation, aligning molecules within the droplet, etc. In some cases, the droplets and/or the fluidic streams may include colloids, cells, therapeutic agents, and the like.

Link, Darren Roy↗
NASA NTRS1994

Global, quasi-steady dynamics of the distant solar wind 2: Deformation of the heliospheric current sheet

A three-dimensional (3-D) magnetohydrodynamic (MHD) numerical model is used to trace global deformations of the heliospheric current sheet (HCS) caused by large-scale dynamical interactions associated with corotating solar wind flows. Configurations incorporating the tilted-dipole geometry are investigated out past 30 AU for a variety of dipole tilt angles, alpha. Inclusion of the full, 3-D interplanetary dynamics allows north-south displacements and the east-west warping of the HCS by advective corotational effects to be accurately assessed for the first time. It is found that large-scale spatial correlations between velocity and density imposed at the coronal source (i.e., the geometric arrangement whereby regions of high-speed low-density material lying adjacent to areas of slow, dense flow interact obliquely under the influence of solar rotation) result in a distinctive pattern of deformation of the HCS. For an alpha = 30 deg tilted-dipole example, it is shown that typical zonal variations in radial velocity lead to significant folding of the HCS within about 5 AU of the Sun. By 10 AU, additional sharp bends appear near the latitudinal extremes of the HCS surface, where it is overtaken by shock fronts driven by 3-D corotating interaction regions (CIRs). Moreover, the model suggests that inside about 20 AU, major plasma structures are systematically organized, about the HCS, such that the greatest concentrations of material and magnetic field (the centroids of the 3-D CIR structures) are coincident with the folded crests of the HCS (near heliographic latitudes lambda = +/- alpha). Thus, in these circumstances many of the more interesting dynamical features inconveniently lie well away from the heliographic equator. At larger heliocentric distances, where neighboring CIRs begin to interact strongly, the warping of the HCS abates dramatically and the association between folds in the HCS and major field and density concentrations is weakened and ultimately breaks down. On the basis of the model calculations, quasi-steady deformations and related phenomena should figure prominently in the interplanetary medium, except during those periods when the magnetic dipole and solar spin axes are nearly aligned (alpha is approximately less than 10 deg). Even then, they may be of significance if there are any substantial local warps or kinks in the streamer belt.

Pizzo, V. J.↗
NASA NTRS1995

Advanced Communication Technology Satellite (ACTS) Multibeam Antenna On-Orbit Performance

The NASA Lewis Research Center's Advanced Communication Technology Satellite (ACTS) was launched in September 1993. ACTS introduced several new technologies, including a multibeam antenna (MBA) operating at extremely short wavelengths never before used in communications. This antenna, which has both fixed and rapidly reconfigurable high-energy spot beams (150 miles in diameter), serves users equipped with small antenna terminals. Extensive structural and thermal analyses have been performed for simulating the ACTS MBA on-orbit performance. The results show that the reflector surfaces (mainly the front subreflector), antenna support assembly, and metallic surfaces on the spacecraft body will be distorted because of the thermal effects of varying solar heating, which degrade the ACTS MBA performance. Since ACTS was launched, a number of evaluations have been performed to assess MBA performance in the space environment. For example, the on-orbit performance measurements found systematic environmental disturbances to the MBA beam pointing. These disturbances were found to be imposed by the attitude control system, antenna and spacecraft mechanical alignments, and on-orbit thermal effects. As a result, the MBA may not always exactly cover the intended service area. In addition, the on-orbit measurements showed that antenna pointing accuracy is the performance parameter most sensitive to thermal distortions on the front subreflector surface and antenna support assemblies. Several compensation approaches were tested and evaluated to restore on-orbit pointing stability. A combination of autotrack (75 percent of the time) and Earth sensor control (25 percent of the time) was found to be the best way to compensate for antenna pointing error during orbit. This approach greatly minimizes the effects of thermal distortions on antenna beam pointing.

Source record↗