Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spectral prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Evidence for the degenerate dwarf nature of Cygnus X-2

Observations of Cygnus X-2 using the Copernicus satellite have revealed a novel relationship between the spectral hardness and the intensity of this source in the 3-8 keV band. This behavior is very similar to that predicted for a spherically accreting nonmagnetic degenerate dwarf. The data, interpreted in terms of this model, determine solar mass, luminosity, and the distance for Cyg X-2; these parameters are at variance with the values derived from optical observations of the system. The implications of this discrepancy for the understanding of the source are examined.

Branduardi, G.↗

X-ray spectra of accreting degenerate stars

X-ray emission from accreting nonmagnetic degenerate dwarfs is discussed. Emphasis is placed on the numerical calculations by Kylafis and Lamb (1979) with regard to the entire range of accretion rates and stellar masses. It is concluded that at moderate and high accretion rates the spectral temperature varies dramatically and the star exhibits a pronounced correlation between X-ray spectral temperature and luminosity. Also considered are the results of Lamb and Masters (1979) of calculations of high-harmonic cyclotron emission from a hot plasma, from which they developed a model of X-ray and UV emission from accreting magnetic degenerate dwarfs. It is found that the position and relative strength of the spectral components change with variations in the accretion rate and differ for different magnetic fields; in addition, magnetic degenerate dwarfs are predicted to be strong UV sources with only a few percent of the total accretion luminosity ordinarily appearing as soft and hard X-rays.

Kylafis, N. D.↗

Crop identification and leaf area index calculations with Landsat multitemporal data

Formulas are given to convert land-based vegetative canopy spectral reflectance measurements into Landsat digital counts in the four channels for a clear standard atmosphere. These formulas are shown to predict the curves found by plotting multitemporal Landsat trajectories. With correct interpretation, plots of channel 3 versus channel 4 Landsat data for crops are shown to yield information on both crop identification and crop leaf area index.

Chance, J. E.↗

Line-of-sight observations at 86 GHz with a very large and a small antenna

Amplitude variations over a 12.9 km terrestrial line-of-sight path were measured simultaneously on a 1400 lambda and a 29 lambda antenna at 86.16 GHz. Clear atmosphere data from two occasions with considerably different meteorological conditions are presented. Both sets have statistical and spectral parameters in good agreement with turbulence theory. Some of the data taken after a thunderstorm front passage show a slow gain reduction of the large antenna of up to 2 dB and an increase in variance to a level above that of the small antenna. The power spectral density of these data reveals that the excess fluctuation power is in the region of the spectrum which turbulence theory predicts to be flat. It shows an approximate 1/f dependence. It is attributed to refractive bending of up to 0.025 deg. Gain reductions due to turbulence or turbulence induced angle-of-arrival variations were estimated to be negligible.

Vogel, W. J.↗

Analysis of the surface load and radiated sound of a vibrating airfoil with application to the experiment of Brooks

A method is developed for calculating the surface load and radiated sound from a vibrating surface in a compressible viscous fluid. The method is applied to a thin two-dimensional elliptic cross-section. For large values of the viscous diffusion parameter, the surface load tends to an elliptic distribution in agreement with the results of inviscid theory when edge pressure continuity is enforced. For thin surfaces, the surface load is insensitive to variations in the thickness ratio. A three-dimensional spectral technique is developed to calculate the inviscid surface load and radiated sound from a thin vibrating airfoil. The inviscid theory predicts the correct form of the far field sound pressure and its phase. The actual levels are somewhat sensitive to the choice of theoretical spanwise surface pressure mode but are in better agreement with the experiment than the surface pressure. The comparison of theoretical and experimental surface pressure indicates that the viscous theory, used to validate the inviscid theory, is either inadequate or there is a source of experimental error.

Yates, J. E.↗

On helicopter rotor low frequency broadband noise

The effect of shear-layer-type inflow turbulence on the low-frequency broadband noise of a model helicopter rotor is experimentally studied. The measurements and the one-dimensional energy spectral density indicate that the upstream airfoil wake turbulence is nonisotropic, but approaches isotropy at high wavenumbers. Turbulence measurements also indicate that the wake turbulence is weak. The effect of the inflow turbulence intensity on the peak sound pressure level follows an intensity-velocity squared scaling law. A number of length scales and turbulence intensities exist which can be measured in the airfoil wake depending on the position at which the measurements are taken. Comparison of experimental and theoretical sound pressure power spectral densities indicates that the initial anisotropy of the inflow turbulence does not invalidate the isotropic turbulence assumption made in noise prediction models as long as measured turbulence intensities and length scales are used.

Williams, Morgan↗

Ultraviolet spectroscopy of pre-main-sequence accretion disks

Low-resolution, ultraviolet spectra of the pre-main-sequence objects Z Canis Majoris, V1057 Cygni, and FU Orionis are presented. Ultraviolet absorption features indicate spectral types of A5 I for FU Ori and F5 I for Z CMa. These results are in reasonable agreement with predictions of simple accretion disk models. The lack of significant veiling of ultraviolet absorption features implies that a hot boundary layer at the inner edge of the disk contributes less than 20 percent of the radiation at 2600-3200 A, which is significantly smaller than expected. It is suggested that accretion has significantly modified the structure of the underlying pre-main-sequence stars in these systems (perhaps by expanding the photosphere or by spinning up a radiative photosphere close to breakup velocity, or both), or that the boundary layer region is much more extended above the disk midplane than standard thin disk theories predict.

Kenyon, S. J.↗

Fabry-Perot interferometer development for rocket engine plume spectroscopy

This paper describes a new rugged high-resolution Fabry-Perot interferometer (FPI) designed for rocket engine plume spectroscopy, which is capable of detecting spectral signatures of eroding engine components during rocket engine tests and/or flight operations. The FPI system will make it possible to predict and to respond to the incipient rocket engine failures and to indicate the presence of rocket components degradation. The design diagram of the FPI spectrometer is presented.

Bickford, R. L.↗

An electro-optic resonant modulator for coherent optical communication

A resonant cavity electro-optic phase modulator has been designed and implemented to operate at a data rate of 10 Mbps. The modulator consists of an electro-optic crystal located in a highly resonant cavity. The cavity is electro-optically switched on and off resonance, and the phase dispersion near the cavity resonance provides the output phase modulation. The performance of the modulator was measured by first heterodyne detecting the signal to an intermediate frequency, and measuring the spectral characteristics using an RF spectrum analyzer. The measured phase shift is shown to be in good agreement with the theoretical predictions. Further theoretical analysis shows that the design of the modulator can be scaled to operate at 100 Mbps.

Robinson, D. L.↗

On the accurate prediction of the wall-normal velocity in compressible boundary-layer flow

A method for predicting the wall-normal velocity in compressible boundary layer flow is presented which is the extension of the fully implicit, spectral collocation method developed by Pruett and Streett (1991). The spectrally accurate method under consideration is capable of extracting the wall-normal velocity from the transformation from the physical plane to a computational plane, without interpolation, leaving the continuity equation free as a check on the quality of the solution. When used in conjunction with a highly accurate spectral collocation method for the compressible boundary-layer equations, the method gives a discrete solution which satisfies the continuity equation nearly to machine precision.

Pruett, C. D.↗

10-Mbps electro-optic resonant phase modulator

A resonant cavity electro-optic phase modulator has been designed and implemented to operate at a data rate of 10 Mbps. The modulator consists of an electro-optic crystal located in a highly resonant cavity. The cavity is electro-optically switched on and off resonance, and the phase dispersion near the cavity resonance provides the output phase modulation. The performance of the modulator was measured by first heterodyne-detecting the signal to an intermediate frequency and then measuring the spectral characteristics using an rf spectrum analyzer. The measured phase shift is shown to be in good agreement with the theoretical predictions. Further theoretical analysis shows that the design of the modulator can be scaled to operate at 100 Mbps.

Robinson, D. L.↗

A 100 Mbps resonant cavity phase modulator for coherent optical communications

A resonant cavity electro-optic phase modulator has been designed and implemented to operate at a data rate of 100 Mbps. The modulator consists of an electro-optic crystal located in a highly resonant cavity. The cavity is electro-optically tuned on and off resonance, and the phase dispersion near the cavity resonance provides the output phase modulation. The performance of the modulator was measured by first heterodyne detecting the signal to an intermediate frequency and then measuring the spectral characteristics using an RF spectrum analyzer. The measured phase shift is shown to be in good agreement with the theoretical predictions.

Chen, Chien-Chung↗

The stellar population and luminosity function in M31 bulge and Inner Disk Fields

We report infrared photometry and stellar identifications for stars in five fields in the M31 bulge located from 2 to 11 arcmin from the nucleus. These fields have been chosen such that the bulge/disk star ratio predicted from Kent's (1989) small bulge model varies from 7:1 to 1:5, allowing a study of near pure disk and near pure bulge stellar populations. We reject the hypothesis of Davies et al. (1991) that luminous stars found within 500 pc of the nucleus are due to a contaminating disk population. We find that the bulge contains stars in excess of M(sub bol) = -5 mag and that the bulge luminosity function has a distinct shape different from the disk fields. We find many stars redder than (J-K) = 2 mag, and suggest that these stars may be the counterparts of the IRAS-selected Galactic bulge Miras studied by Whitelock et at. (1991). The number of bright stars (M(sub bol) is less than -5 mag) falls off more rapidly than the r band surface brightness. By building model fields out of a bulge luminosity function and artificial stars, we are able to show that the change in the luminosity function toward the center cannot be explained simply by the mismeasurement of overcrowded star images. However, these tests also raise the possibility that the asymptotic giant branch (AGB) tip may be approximately equal to 1 mag fainter than actually measured in our most crowded field, reaching only M(sub bol) = -5. We compare observed counts of AGB stars with those predicted from theoretical lifetimes using a technique of general interest for this problem, the Fuel Consumption Theorem of Renzini & Buzzoni (1986) Spectral Evolution of Galaxies (Reidel, Dordrecht). Our methodology is generally applicable to the study of other resolved extragalactic stellar populations. The number of observed stars per magnitude up to a luminosity of M(bol) = -5.5 mag is consistent with AGB evolution of the whole population of the innermost bulge field with the standard lifetime on the AGB of 1.3 Myr/mag. We advance the possibility that the bulge of M31 may be younger than the oldest Galactic globular clusters. We note that M33 has recently been found to have an r(exp 1/4)-law spheroid consisting of intermediate-age stars; bulges can form later than the old halo population.

Rich, R. Michael↗

Vehicle/Atmosphere Interaction Glows: Far Ultraviolet, Visible, and Infrared

Spacecraft glow information has been gathered from a number of spacecraft including Atmospheric and Dynamic satellites, and Space Shuttles (numerous flights) with dedicated pallet flow observations on STS-39 (DOD) and STS-62 (NASA). In addition, a larger number of laboratory experiments with low energy oxygen beam studies have made important contributions to glow understanding. The following report provides information on three engineering models developed for spacecraft glow including the far ultraviolet to ultraviolet (1400-4000 A), and infrared (0.9-40 microns) spectral regions. The models include effects resulting from atmospheric density/altitude, spacecraft temperature, spacecraft material, and ram angle. Glow brightness would be predicted as a function of distance from surfaces for all wavelengths.

Swenson, G.↗

Orbital Measurement and Verification of the Chandra X-Ray Observatory's PSF

The recently launched Chandra x-ray Observatory (CXO) was designed to have the sharpest angular resolution yet of any x-ray telescope. Detailed modeling and metrology of the optics followed by extensive testing at the X-ray Calibration Facility at the Marshall p Space Flight Center in Huntsville, Alabama, indicated that the optics were performing exceedingly well, within our ability to account for distortion of the mirrors due to gravity, and the effects of finite distance and size of the x-ray generator. Thus it was only on-orbit that we expected to directly observe the specified half arcsecond performance. We present here results of the on-orbit calibration of the point spread function (PSF), comparing it with our predictions. We discuss how the PSF varies with source location in the telescope field of view, as well as with the spectral energy distribution of the source.

Jerius, D.↗

Surface Emissivity Impacts on GOES-R Series Multi-Spectral Imagery Applications

Value-added imagery products from the GOES-R series Advanced Baseline Imager are used to identify features of interest for operational forecasters, including: blowing dust, smoke, volcanic ash, cloud cover, atmospheric moisture, biomass fires and snow cover. These features each have a specific spectral signal that algorithms are designed to detect, but those signals are not always unique to just a single feature. Sometimes, the surface can mimic the spectral signal associated with an atmospheric feature of interest, creating a false alarm in a value-added product which negatively impacts interpretation of that product. This case study focuses on one such situation where areas of desert in the southwestern United States mimic the positive value associated with low clouds in the Brightness Temperature Difference (BTD) between the 10.35 μm and 3.9 μm channels, producing a false alarm. In order to characterize these “false alarm” areas, this study uses the cloud-cleared background product from the Cooperative Institute for Research in the Atmosphere (CIRA) to create a dataset of the cloud-free surface. Previous results have shown that cloud-cleared backgrounds of the 10.35 μm-3.9 μm BTD have successfully identified areas of positive BTDs in the cloud-free environment, proving that it is a property of the surface emissivity and a true “false alarm”. This study builds on that previous research to further characterize the seasonality of the “false-alarm” regions and to catalogue how they impact interpretation of multi-spectral imagery products from the GOES-R series ABI, especially the Nighttime Microphysics RGB created by NASA Short-term Prediction Research and Transition (SPoRT) Center.

Burke, Angela↗

Keck/OSIRIS Paβ High-contrast Imaging and Updated Constraints on PDS 70b

We present a high-contrast imaging search for Paβ line emission from protoplanets in the PDS 70 system with Keck/OSIRIS integral field spectroscopy. We applied the high-resolution spectral differential imaging technique to the OSIRIS J-band data but did not detect the Paβ line at the level predicted using the parameters of Hashimoto et al. (2020). This lack of Paβ emission suggests the MUSE-based study may have overestimated the line width of Hα. We compared our Paβ detection limits with the previous Hα flux and Hβ limits and estimated AV to be ∼0.9 and 2.0 for PDS 70 b and c, respectively. In particular, PDS 70 b’s AV is much smaller than implied by high-contrast near-infrared studies, which suggests the infrared-continuum photosphere and the hydrogen-emitting regions exist at different heights above the forming planet.

Taichi Uyama↗

Spin and Accretion Rate Dependence of Black Hole X-Ray Spectra

We present a survey of how the spectral features of black hole X-ray binary systems depend on spin, accretion rate, viewing angle, and Fe abundance when predicted on the basis of first-principles physical calculations. The power-law component hardens with increasing spin. The thermal component strengthens with increasing accretion rate. The Compton bump is enhanced by higher accretion rate and lower spin. The Fe Kα equivalent width grows sublinearly with Fe abundance. Strikingly, the Kα profile is more sensitive to accretion rate than to spin because its radial surface brightness profile is relatively flat, and higher accretion rate extends the production region to smaller radii. The overall radiative efficiency is at least 30%–100% greater than as predicted by the Novikov–Thorne model.

Brooks E Kinch↗