Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “space electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Energetic charged particles in the magnetosphere of Neptune

The Voyager 2 cosmic ray system (CRS) measured significant fluxes of energetic greater than or equal to about 1 megaelectron volt (MeV) trapped electrons and protons in the magnetosphere of Neptune. The intensities are maximum near a magnetic L shell of 7, decreasing closer to the planet because of absorption by satellites and rings. In the region of the inner satellites of Neptune, the radiation belts have a complicated structure, which provides some constraints on the magnetic field geometry of the inner magnetosphere. Electron phase-space densities have a positive radial gradient, indicating that they diffuse inward from a source in the outer magnetosphere. Electron spectra from 1 to 5 MeV are generally well represented by power laws with indices near 6, which harden in the region of peak flux to power law indices of 4 to 5. Protons have significantly lower fluxes than electrons throughout the magnetosphere, with large anisotropies due to radial intensity gradients. The radiation belts resemble those of Uranus to the extent allowed by the different locations of the satellites, which limit the flux at each planet.

Stone, E. C.↗

Combined space environment on spacecraft engineering materials

Spacecraft structures and surface materials exposed to the space environment for extended periods, up to thirty years, have increased potential for damage from long term exposure to the combined space environment including solar ultraviolet radiation, electrons, and protons and orbiting space debris. The space environment in which the Space Station Freedom and other space platforms will orbit is truly a hostile environment. For example, the currently estimated integral fluence for electrons above 1 Mev at 2000 nautical miles is above 2 x 10(exp 10) electrons/cm(sup 2)/day and the proton integral fluence is above 1 x 10(exp 9) protons/cm(sup 2)/day. At the 200 - 400 nautical miles, which is more representative of the altitude which will provide the environment for the Space Station, each of these fluences will be proportionately less; however, the data indicates that the radiation environment will obviously have an effect on structural materials exposed to the environment for long durations. The effects of ultraviolet radiation, particularly in the vacuum ultraviolet (less than 200 nm wavelength) is more difficult to characterize at this time. Very little data is available in the literature which can be used for determining the life cycle of a material placed in space for extended durations of time. In order to obtain critical data for planning and designing of spacecraft systems, use of a small vacuum system at the Environmental Effects Facility at MSFC, which can be used for these purposes was used. A special effort was made to build up this capability during the course of this research effort and perform a variety of experiments on materials proposed for the Space Station. A description of the apparatus and the procedure devised to process potential spacecraft materials is included.

Workman, Gary L.↗

SPACE CHARGE EFFECT IN LOW ENERGY MAGNETIZED ELECTRON BEAM

Magnetized electron cooling is one of the major approaches towards obtaining the required high luminosity in the proposed Electron-Ion Collider (EIC). In order to increase the cooling efficiency, a bunched electron beam with a high bunch charge and high repetition rate is required. At Jefferson Lab, we generated magnetized electron beams with high bunch charge using a new compact DC high voltage photogun biased at -300 kV with bialkali-antimonide photocathode and a commercial ultra-fast laser. This contribution discusses how magnetization affects space charge dominated beams as a function of magnetic field strength, gun high voltage, and laser pulse width, and spot size in comparison with simulations performed using General Particle Tracer.

Wijethunga, S.A.K.↗

Ionospheric electron-content measurements during the second space-plasma negative-ion experiment (SPINEX-2)

The second space-plasma negative-ion experiment (SPINEX-2), a chemical-release active experiment to investigate negative-ion effects in the ionospheric F region, is described by Mendillo et al. (1982). This paper describes the electron-content measurements in somewhat more detail than would be appropriate there. The circumstances of the experiment, particularly the use of a vehicle with a very high spin rate, presented some unusual challenges during interpretation of the electron-content data. These are described. The resulting profiles show clearly that the chemical release caused a very significant 'hole' in the ionosphere. Under certain fairly realistic assumptions, the actual number of free electrons removed from the region of the peak of the ionospheric F layer is estimated to be about 4 x 10 to the 25th. The same assumptions lead to a simple radial distribution of the depleted region about the rocket trajectory in the neighborhood of the release.

Fulford, J. A.↗

Electron-Scale Measurements of Magnetic Reconnection in Space

Magnetic reconnection is a fundamental physical process in plasmas whereby stored magnetic energy is converted into heat and kinetic energy of charged particles. Reconnection occurs in many astrophysical plasma environments and in laboratory plasmas. Using measurements with very high time resolution, NASA's Magnetospheric Multiscale (MMS) mission has found direct evidence for electron demagnetization and acceleration at sites along the sunward boundary of Earth's magnetosphere where the interplanetary magnetic field reconnects with the terrestrial magnetic field. We have (i) observed the conversion of magnetic energy to particle energy; (ii) measured the electric field and current, which together cause the dissipation of magnetic energy; and (iii) identified the electron population that carries the current as a result of demagnetization and acceleration within the reconnection diffusion/dissipation region.

Burch, J. L.↗

Design of Experiment for the Measurement of Aerosol Droplet Size Distribution of Temperature-Controlled Thermally Atomized Printed Electronic Inks

In-Space Manufacturing (ISM) centers around NASA’s growing need and ability to produce space technologies on demand in space. As the future of long term presence in space and deep space exploration approach, fundamental questions of our dependence on earth resupply to Low Earth Orbit (LEO) remain unanswered. ISM is leading various effort to evaluate the feasibility of producing essential spares and redundant parts on demand to enable a sustainable space-based supply chain model for part resupply. Among the parts and systems being considered, Avionics form the neural network of modern day aircraft and space vehicles providing a wealth of information ranging from Guidance, Navigation, and Control (GN&C) systems to on board Environmental Control and Life Support (ECLS) systems. Recent advances in the use of Aerosol Jet Technology to print Avionics components ranging from electrical traces on a circuit board to complex transistors and sensors raise the possibility of using such technology to reproduce or recreate electronic parts on demand with the help of custom electronics 3D printers. The challenge herein lies within the ability of such printers to generate and deposit an aerosol of electronic material utilizing processes independent of or enhanced by gravity to ensure controllably identical or improved behavior of the aerosol in an International Space Station (ISS) laboratory and on the ground. The behavior as well as the hazards and properties associated with such aerosols in a microgravity environment must be understood well in order to merit a feasible approach to utilizing them for manufacturing in space. In this report, we outline the experimental setup of a modified conventional vaping device to be used as the ideal gravity independent thermal atomization mechanism to generate aerosol. Our objective is to identify the ideal mass, density, and volume of our aerosolized droplets of ink to conclude that there exist a threshold of aerosolized ink droplet sizes that are indeed independent of the effects of gravity and remain stable after atomization. We use a Malvern Spraytec® Spray Particle Size Analyzer to perform real-time laser diffraction measurement of our ink droplets during atomization. The droplet size between conductive ink, dielectric ink and vegetable glycerin have been measured and contrasted. Furthermore, the mechanism of thermal atomization versus traditional pneumatic and ultrasonic atomization for operation in microgravity have been explored.

Wu, Chih-Hao↗

Axial motion of collector plasma in a relativistic backward wave oscillator

In this paper, it is proposed that plasma formed at the collector may drift back to the cathode and cause pulse shortening of the relativistic backward wave oscillator. Theoretical analysis shows that the axial drift velocity of plasma ions can be up to 5 mm/ns due to the presence of space charge potential provided by an intense relativistic electron beam. Particle-in-cell simulations indicate that the plasma electrons are initially trapped around the collector surface. With the accumulation of the plasma ions, a large electrostatic field forms and drives the plasma electrons to overcome the space charge potential and enter the beam-wave interaction region along the magnetic field lines. As a result, the beam current modulation is disturbed and the output microwave power falls rapidly. The plasma ions move in the beam-wave interaction region with an average axial velocity of 5–8 mm/ns. After the plasma ions reach the diode region, the emitted current at the cathode rises due to the charge neutralizations by the ions. The impedance collapse leads to further decrease of the microwave power. In experiments, when the diode voltage and beam current were 850 kV and 9.2 kA, and the collector radius was 2.15 cm, the output microwave power was 2.4 GW with a pulse width of less than 20 ns. The ion drift velocity was estimated to be about 5 mm/ns. After an improved collector with 3.35 cm radius was adopted, the pulse width was prolonged to more than 30 ns.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Filamentation and focusing of electron beams due to interactions with plasma waves

Results of numerical modeling of the interaction of an electron beam propagating across relativistic plasma waves indicate that electron beam filamentation and focusing may occur under certain conditions. The model is based on solving the relativistic equation of motion in three dimensions for the individual electrons in a tenuous Gaussian beam, as they pass through a relativistic plasma wave. Several electron beam and plasma wave parameters were varied, and the results are summarized. One of the results is that the spacing of the electron beam filaments correlates with the wavelength of the plasma wave. The electron beam filaments appear as vertical slabs after the beam exits the plasma waves. The electron beam also compresses to a focus after it exits the plasma, and the focal distance depends on several parameters including the electron beam energy and phase velocity of the relativistic plasma wave. It is suggested that these focusing and filamentation phenomena may be the basis for diagnostics schemes for laser plasma interactions. The parameters used in the model were electron beam energies in the 5–50 keV range and plasma wave properties typical for the beat-wave produced by CO2 lasers, which correspond to the facilities available in our laboratory. The limitations of these results to lower energy density beam and plasma regimes and to higher energy density regimes will be discussed.

47 OTHER INSTRUMENTATION↗

Jefferson Lab High Precision Proton Radius Measurement Experiment: PRad

Proton is not a point-like particle; it has a finite size and an internal structure. The proton charge radius is usually measured through two different methods: using spectroscopy of hydrogen atoms, or through electron-proton (e - p) elastic scattering at low momentum transfer. In 2010, Phol et al [1] published a new measurement for proton charge radius obtained using the spectroscopy method from muonic hydrogen atoms. An ordinary hydrogen (H) atom is a bound state of an electron orbiting a proton. Likewise, a muonic hydrogen atom has a muon orbiting a proton. Since a muon has 200 times more mass than an electron, resulting in a much smaller orbiting radius, its orbit is much more sensitive to the proton charge distribution in space than the electron’s of an ordinary H-atom. Thus, the measurement from muonic hydrogen provides a 10 times more precise result than the previous methods. The radius from the muonic hydrogen measurement reported in [1] was significantly smaller than all the p

Bai, Xinzhan↗

Analysis of FEL-based CeC amplification at high gain limit

An analysis of Coherent electron Cooling (CeC) amplifier based on 1D Free Electron Laser (FEL) theory was previously performed with exact solution of the dispersion relation, assuming electrons having Lorentzian energy distribution. At high gain limit, the asymptotic behavior of the FEL amplifier can be better understood by Taylor expanding the exact solution of the dispersion relation with respect to the detuning parameter. In this work, we make quadratic expansion of the dispersion relation for Lorentzian energy distribution and investigate how longitudinal space charge and electrons’ energy spread affect the FEL amplification process.

43 PARTICLE ACCELERATORS↗

Cyclotron effects on double layer ion acceleration from laser-irradiated thin foils

The effect of an axial magnetic field on laser driven ion acceleration from a thin overdense plasma slab is investigated. The magnetic field modifies the refractive index of the plasma and the axial ponderomotive force. The latter compresses the electrons until the space charge field thus created offsets it. When the foil thickness is just bigger than the length at which this happens, the compressed electrons and a thin ion layer detach from the foil forming a double layer that gets accelerated by the laser radiation pressure force. The optimum thickness of laser foil, DELTA{sub s}, for maximum acceleration is sensitive to the polarization of the laser pulse. For right circular polarization it increases, while for left circular polarization it decreases with the magnetic field. The ion energy gain is sensitive to a{sub 0}{sup 2}omega{sup 2}/DELTA{sub s}omega{sub p}{sup 2} (where a{sub 0} is the laser field strength, omega{sub p} is the plasma frequency, and omega is the laser frequency) and can be tuned by varying the magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Space dependent, full orbit effects on runaway electron dynamics in tokamak plasmas

The dynamics of RE (runaway electrons) in fusion plasmas span a wide range of temporal scales, from the fast gyro-motion, ∼10−11 s, to the observational time scales, ∼10−2→1 s. To cope with this scale separation, RE are usually studied within the bounce-average or the guiding center approximations. Although these approximations have yielded valuable insights, a study with predictive capabilities of RE in fusion plasmas calls for the incorporation of full orbit effects in configuration space in the presence of three-dimensional magnetic fields. We present numerical results on this problem using the Kinetic Orbit Runaway electrons Code that follows relativistic electrons in general electric and magnetic fields under the full Lorentz force, collisions, and radiation losses. At relativistic energies, the main energy loss is due to radiation damping, which we incorporate using the Landau-Lifshitz formulation of the Abraham-Lorentz-Dirac force. The main focus is on full orbit effects on synchrotron radiation. It is shown that even in the absence of magnetic field stochasticty, neglecting orbit dynamics can introduce significant errors in the computation of the total radiated power and the synchrotron spectra. The statistics of collisionless (i.e., full orbit induced) pitch angle dispersion, and its key role played on synchrotron radiation, are studied in detail. Numerical results are also presented on the pitch angle dependence of the spatial confinement of RE and on full orbit effects on the competition of electric field acceleration and radiation damping. Finally, full orbit calculations are used to explore the limitations of gyro-averaging in the relativistic regime. To explore the practical impact of the results, DIII-D and ITER-like parameters are used in the simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Revised Space Environment Models in CREME-MC: A Replacement for CREME96

The CREME96 model has been available on the WWW for more than 10 years now. While principally for the estimation of radiation effects on spacecraft electronics, it contains space radiation environment models that have been used for instrument design calculations, estimation of instrumental background, estimation of radiation hazards and many other purposes. Because of the evolution of electronic part design we have found it necessary to revise CREME96, creating CREME-MC. As part of this revision, we are revising and extending the environmental models in CREME96. This talk will describe the revised radiation environment models that are being made available in CREME-MC

Adams, James H., Jr.↗

Solving the electronic structure problem for over 100000 atoms in real space

Using a real-space high-order finite-difference approach, we investigate the electronic structure of large spherical silicon nanoclusters. Within Kohn-Sham density functional theory and using pseudopotentials, we report the self-consistent field convergence of a system with over 100000 atoms: a Si 107,641 ⁢H 9,084 nanocluster with a diameter of 16 nm. Our approach uses Chebyshev-filtered subspace iteration to speed up the convergence of the eigenspace, and blockwise Hilbert space-filling curves to speed up sparse matrix-vector multiplications, all of which are implemented in the parsec code. For the largest system, we utilized 2048 nodes (114 688 cores) on the Frontera machine in the Texas Advanced Computing Center. Our quantitative analysis of the electronic structure shows how it gradually approaches its bulk counterpart as a function of nanocluster size. The band gap is enlarged due to quantum confinement in nanoclusters, but decreases as the system size increases, as expected. In conclusion, our work serves as a proof of concept for the capacity of the real-space approach in efficiently parallelizing very large calculations using high-performance computer platforms, which can straightforwardly be replicated in other systems with more than 10 5 atoms.

0-dimensional systems↗

NASA Goddard Space Flight Center’s Recent Radiation Effects Test Results

Total ionizing dose, displacement damage dose, and single event effects testing were performed to characterize and determine the suitability of candidate electronics for NASA space utilization. Devices tested include FPGAs, optoelectronics, digital, analog, and bipolar devices.

Single-Event Effects (SEE)↗

Tunable Oxygen Diffusion and Electronic Conduction in SrTiO 3 by Dislocation-Induced Space Charge Fields

Plastic strain engineering has been applied to induce controllable changes in electronic and oxygen ion conductivity in oxides by orders of magnitude, without changing their nominal composition. By using SrTiO 3 as a model system of technological importance, and by combining electrical and chemical tracer diffusion experiments with computational modeling, it is revealed that dislocations alter the equilibrium concentration and distribution of electronic and ionic defects. The easier reducibility of the dislocation cores increases the n-type conductivity by 50 times at oxygen pressures below 10 -5 atm at 650 °C. At higher oxygen pressures the p-type conductivity decreases by 50 times and the oxygen diffusion coefficient reduces by three orders of magnitude. The strongly altered electrical and oxygen diffusion properties in SrTiO 3 arise because of the existence of overlapping electrostatic fields around the positively charged dislocation cores. The findings and the approach are broadly important and have the potential for significantly impacting the functionalities of electrochemical and/or electronic applications such as thin film oxide electronics, memristive systems, sensors, micro-solid oxide fuel cells, and catalysts, whose functionalities rely on the concentration and distribution of charged point defects.

36 MATERIALS SCIENCE↗

The formation of kappa-distribution accelerated electron populations in solar flares

Driven by recent RHESSI observations of confined loop-top hard X-ray sources in solar flares, we consider stochastic acceleration of electrons in the presence of Coulomb collisions. If electron escape from the acceleration region can be neglected, the electron distribution function is determined by a balance between diffusive acceleration and collisions. Such a scenario admits a stationary solution for the electron distribution function that takes the form of a kappa distribution. We show that the evolution toward this kappa distribution involves a 'wave front' propagating forward in velocity space, so that electrons of higher energy are accelerated later; the acceleration timescales with energy according to τ{sub acc} ∼ E {sup 3/2}. At sufficiently high energies escape from the finite-length acceleration region will eventually dominate. For such energies, the electron velocity distribution function is obtained by solving a time-dependent Fokker-Planck equation in the 'leaky-box' approximation. Solutions are obtained in the limit of a small escape rate from an acceleration region that can effectively be considered a thick target.

79 ASTRONOMY AND ASTROPHYSICS↗