Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid phase processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Thermodynamic description of molten salt systems: KCl-LiCl-NaCl and KCl-LiCl-NdCl 3

The mixture of KCl and LiCl has been used as electrolyte in the electrorefining process to recover uranium from used nuclear fuels due to the low melting point. However, lanthanides and sodium in the reactor waste continuously dissolve into it and thus alter its thermodynamic properties. To understand the thermodynamic behavior evolution of the electrolyte with the accumulation of impurities, thermodynamic modeling for KCl-LiCl-NaCl and KCl-LiCl-NdCl 3 and four constituent binary systems in the entire composition space was performed using the CALPHAD (CALculation of PHAse Diagrams) approach. The ionic liquid was described by the two-sublattice model, where neutral species were introduced to consider short-range ordering (SRO) within the melt, whereas the solid solution was modeled based on the Compound Energy Formalism. Literature data on phase equilibria and thermochemical properties were critically evaluated and used during the optimization of thermodynamic parameters for KCl-LiCl-NaCl and KCl-LiCl-NdCl 3 and their subsystems. The calculated phase diagrams and mixing enthalpies are in good agreement with the experimental data. The thermodynamic modeling for the KCl-LiCl-NdCl 3 system was carried out for the first time. To fill the gap in experimental measurement, enthalpy of mixing for the KCl-LiCl-NdCl 3 melt was estimated using the surrounded-ion model. These data then served as critical inputs for thermodynamic optimization. Furthermore, the present study can provide insights into thermodynamic property evolution of the electrolyte and solubility limit of various impurities during the electrorefining process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Entropy-defect synergy for dual luminescence mechanism in spinel: Time-resolved anti-counterfeiting and fingerprint visualization

Multimodal luminescent materials, while promising for anti-counterfeiting, often lack dynamic time-dependent responses and controllable spatial distribution, limiting their encryption capabilities in the spatiotemporal dimension. Here, this work presents a coordinated control strategy based on entropy and defect engineering, and uses a backpropagation (BP) neural network for material screening to successfully prepare spinel Mg 0.8 (Fe 0.04 Co 0.04 Ni 0.04 Cu 0.04 Zn 0.04 )Cr 2 O 4 (MgA 5 CO) phosphors with time-dependent dynamic luminescence behavior. This phosphor simultaneously activated the d-d transition luminescence (∼618 nm) derived from Co 2+ /Cr 3+ and the defect luminescence (∼398 nm) related to zinc vacancies (V Zn ) in a single-phase solid solution. The phosphor exhibits a time-dependent color evolution from pink to purple under fixed-wavelength excitation, due to the different excited-state dynamics and decay lifetimes associated with the d-d transition and defect luminescence. Structural characterization and spectral analysis confirmed the existence of V Zn and its significant role in defect luminescence process. The fluorescent and dynamic luminescent properties of entropy-based spinel oxide enable its use in advanced anti-counterfeiting applications like fingerprint recognition and color-changing dedicated anti-counterfeiting mark, showing promise in high-end and time-dynamic anti-counterfeiting fields. This research not only developed a new type of fluorescent dynamic anti-counterfeiting material, but also provided a new idea for constructing advanced optical functional materials with multiple luminescence mechanisms.

Defect project↗
DOE OSTI2015

Structural evolution and strain induced mixing in Cu–Co composites studied by transmission electron microscopy and atom probe tomography

A Cu–Co composite material is chosen as a model system to study structural evolution and phase formations during severe plastic deformation. The evolving microstructures as a function of the applied strain were characterized at the micro-, nano-, and atomic scale-levels by combining scanning electron microscopy and transmission electron microscopy including energy-filtered transmission electron microscopy and electron energy-loss spectroscopy. The amount of intermixing between the two phases at different strains was examined at the atomic scale using atom probe tomography as complimentary method. It is shown that Co particles are dissolved in the Cu matrix during severe plastic deformation to a remarkable extent and their size, number, and volume fraction were quantitatively determined during the deformation process. From the results, it can be concluded that supersaturated solid solutions up to 26 at.% Co in a fcc Cu–26 at.% Co alloy are obtained during deformation. However, the distribution of Co was found to be inhomogeneous even at the highest degree of investigated strain. - Highlights: • Structural evolution in a deformed Cu–Co composite is studied on all length scales. • Amount of intermixing is examined by atom-probe tomography. • Supersaturated solid solutions up to 26 at.% Co in Cu are observed.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tight Coupling of Surface and In-Plant Biochemistry and Convection Governs Key Fine Particulate Components over the Amazon Rainforest

We report that throughout the troposphere over the Amazon rainforest, isoprene epoxydiol-secondary organic aerosols (IEPOX-SOA) are key components of submicrometer particle mass. IEPOX-SOA is thought to form by multiphase chemical pathways in the atmosphere, but using detailed model simulations, we show that these pathways are strongly inhibited by the solid particle phase state prevailing in the upper troposphere. We find that 2-methyltetrol gases formed by in-plant biochemical oxidation pathways, their partitioning to fine particles, and dissolution in cloud droplets can explain over 90% of IEPOX-SOA mass concentrations in the upper troposphere. In agreement with previous PM10 chiral measurements, our simulations indicate that plant biochemical processes are the dominant source of particulate 2-methyltetrols in the lower troposphere as well (>70%). Our results imply that in-plant biochemistry plays a central but previously unidentified role in aerosol processes and atmosphere-biosphere-climate interactions over the rainforest.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Predicting the influence of particle size on the glass transition temperature and viscosity of secondary organic material

Abstract Atmospheric aerosols can assume liquid, amorphous semi-solid or glassy, and crystalline phase states. Particle phase state plays a critical role in understanding and predicting aerosol impacts on human health, visibility, cloud formation, and climate. Melting point depression increases with decreasing particle diameter and is predicted by the Gibbs–Thompson relationship. This work reviews existing data on the melting point depression to constrain a simple parameterization of the process. The parameter $$\xi $$ ξ describes the degree to which particle size lowers the melting point and is found to vary between 300 and 1800 K nm for a wide range of particle compositions. The parameterization is used together with existing frameworks for modeling the temperature and RH dependence of viscosity to predict the influence of particle size on the glass transition temperature and viscosity of secondary organic aerosol formed from the oxidation of $$\alpha $$ α -pinene. Literature data are broadly consistent with the predictions. The model predicts a sharp decrease in viscosity for particles less than 100 nm in diameter. It is computationally efficient and suitable for inclusion in models to evaluate the potential influence of the phase change on atmospheric processes. New experimental data of the size-dependence of particle viscosity for atmospheric aerosol mimics are needed to thoroughly validate the predictions.

36 MATERIALS SCIENCE↗
DOE OSTI2016

In situ diagnostics of the crystal-growth process through neutron imaging: application to scintillators

Neutrons are known to be unique probes in situations where other types of radiation fail to penetrate samples and their surrounding structures. In this paper it is demonstrated how thermal and cold neutron radiography can provide time-resolved imaging of materials while they are being processed ( e.g. while growing single crystals). The processing equipment, in this case furnaces, and the scintillator materials are opaque to conventional X-ray interrogation techniques. The distribution of the europium activator within a BaBrCl:Eu scintillator (0.1 and 0.5% nominal doping concentrations per mole) is studied in situ during the melting and solidification processes with a temporal resolution of 5–7 s. The strong tendency of the Eu dopant to segregate during the solidification process is observed in repeated cycles, with Eu forming clusters on multiple length scales (only for clusters larger than ~50 µm, as limited by the resolution of the present experiments). It is also demonstrated that the dopant concentration can be quantified even for very low concentration levels (~0.1%) in 10 mm thick samples. The interface between the solid and liquid phases can also be imaged, provided there is a sufficient change in concentration of one of the elements with a sufficient neutron attenuation cross section. Tomographic imaging of the BaBrCl:0.1%Eu sample reveals a strong correlation between crystal fractures and Eu-deficient clusters. The results of these experiments demonstrate the unique capabilities of neutron imaging for in situ diagnostics and the optimization of crystal-growth procedures.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

9.12 - Porous Liquids Based on Rationally Designed Complex, Hierarchical Nano- and Microarchitectures

Porous liquids with permanent porosity are a new area of materials science, which should exhibit attractive properties to open up long-term applications in chemical processes. However, since 2007 when the idea was firstly put forward, these unique porous materials remained essentially hypothetical. The creation of permanent pores in dense liquid state is much more challenging than that in rigid solids, owing to the loose packing of liquid molecules with free to move properties. As proposed, the homogeneous incorporation of rigid porous solids into the liquid phase to afford permanent porosity is a promising synthetic strategy toward porous liquids fabrication. Unfortunately, there are a number of challenges associated with creating porous liquid, such as intermolecular self-filling, easy collapse or decomposition of the organic hosts, and serious settling of nanoparticles. Very recently, the development of supramolecular chemistry based on hierarchical assembly of nanoscale elements into three-dimensional, complex nano- and microarchitectures gives birth to a great opportunity to address the above issues for porous liquid fabrication. Here, porous liquids based on the rationally designed complex, hierarchical architecture with robust porous structure are presented along with potential applications such as gas separations.

Zhang, Jinshui↗
DOE OSTI2021

Development of Corrosion- and Erosion-Resistant Coatings for Advanced Ultra-Supercritical Materials

This final report summarized the research efforts and major findings of the Phase I Project “Development of Corrosion- and Erosion-Resistant Coatings for Advanced Ultra-Supercritical Materials”, for the period of October 1, 2019 – Sept. 30, 2021. This project is a collaborative endeavor between Tennessee Tech University, Purdue University, Oak Ridge National Laboratory, Siemens Corporation, and Eastern Plating, LLC, aiming at improving the durability and lifetime of high-pressure (HP) steam turbine blades in advanced ultra-supercritical (A-USC) coal-fired power plants through the development of corrosion/erosion-resistant coatings manufactured via a low-cost electrolytic codeposition process. While Tribaloy alloy T-400C was identified by the U.S. A-USC Materials Consortium as a promising coating composition, further composition optimization is needed to enhance its corrosion and erosion resistance for protecting the A-USC Ni-base turbine components. An integrated computational and experimental approach was employed to optimize coating composition/microstructure and processing parameters. In order to identify candidate coating compositions that could offer balanced properties, thermodynamic calculations were performed to explore the γ+Laves composition space in the Co-Ni-Cr-Mo-Si system with different alloying additions at 600-800 °C. Guided by the calculation results, experimental assessment of selected alloys led to the development of a new generation of Tribaloy compositions with the optimal levels of Cr, Mo and Si, reactive element (e.g., 0.4-0.6 wt.% Y) and other alloying additions. The low-cost and non-line-of-sight electro-codeposition process was employed to deposit a Ni(Co)-CrMoSiY composite coating on commercial Haynes 282 (H282) Ni-base alloy. A diffusion treatment was subsequently applied to convert the composite to the Tribaloy-type coating. Both the codeposition parameters and heat treatment conditions were varied to achieve the desired coating composition, microstructure and phase constituents. In addition, since additive manufacturing (AM) may be an alternative cost-saving option for potential A-USC turbine repair, laser direct deposition was explored to fabricate the H282 alloy with minimal defects. The electro-codeposited Tribaloy coating was also applied to the AM H282 substrate to demonstrate the viability of the coating process in improving the surface finish of AM alloys. Both high-temperature oxidation performance and solid particle erosion (SPE) resistance of model alloys and electro-codeposited coatings were evaluated. About 25 model alloys with various Cr/Mo ratios and reactive element levels, as well as partial substitution of Mo with Nb were evaluated with regard to their oxidation resistance in both air and pure steam at 760-800°C. Compositions based on Ni(Co)-20Cr-18Mo-2.6Si-0.6Y (wt.%) showed significantly improved oxidation resistance over the baseline T400-C. Based on the alloy development results, three generations of new Tribaloy coatings (Gen-1, Gen-2, and Gen-3) with various Mo/Cr contents and Y levels were prepared via electro-codeposition and their microstructure/performance were evaluated. Outstanding air and steam oxidation resistance was achieved for the Gen-2 and Gen-3 coatings. Furthermore, while the SPE resistance of the coatings depended on many factors such as temperature, environment, erodent, velocity and impact angle, the coated samples exhibited similar or better SPE resistance compared to the H282 substrate when magnetite was used as erodent (which is a realistic erodent in A-USC steam turbines). The new Tribaloy coatings also had good long-term compatibility with the H282 alloy substrate. The two large-sized rotating barrels were designed, constructed, and employed to coat dummy HP blades. Uniform coating thickness and microstructure were achieved at various blade locations. Also, a preliminary techno-economic analysis of the proposed coating process was conducted to quantify the cost-effectiveness and to assess the commercial viability of the corrosion- and erosion-resistant coatings. It is estimated that a cost reduction of ~30% could be achieved with the electro-codeposition coating process over the state-of-the-art high velocity oxygen fuel (HVOF) thermal spray. Compared to the leading Tribaloy coating technologies such as HVOF and plasma transfer alloying, electro-codeposition based process has advantages such as low-cost process equipment, uniform deposition even for complex shapes, low levels of contaminants/porosities, reduction of powder waste, and potentially better surface finish and longer turbine service life. The Phase 1 study has demonstrated that it is feasible to develop an electro-codeposited Tribaloy coating with balanced corrosion and erosion properties, even though additional research efforts such as further coating process scale-up and longer-term performance evaluation under realistic A-USC conditions are clearly needed.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2017

Anaerobic digestion of solid agroindustrial waste in semi-continuous mode: Evaluation of mono-digestion and co-digestion systems

Highlights: • Agroindustrial waste were co-digested with an artificial organic fraction. • Variations in organic loading rate and hydraulic retention time were studied. • Sequential feeding of the substrates based on their seasonality was investigated. • Co-digestion resulted in higher methane yields compared with mono-digestion. • Applying sequential feeding led to a more equilibrated system operation. - Abstract: The present study aimed at investigating the anaerobic digestion of four agroindustrial waste, namely cotton gin waste, winery waste, olive pomace and juice industry waste, in semi-continuous mode, conducting mono-digestion and co-digestion assays, using an artificial organic fraction sample as co-substrate. These assays were divided into two groups, in which different conditions were applied. Group I investigated the variation in two operational parameters, i.e. the organic loading rate (OLR) and the hydraulic retention time (HRT), while in Group II, the assays were fed with different substrates in a sequential order. Results showed more elevated specific methane yields for co-digestion assays compared with mono-digestion assays. Maximum yields were achieved at an OLR of 1.0 gVS/(L·d) and a HRT reduced to half of the initial. Further reduction of the HRT coupled to an increase of the OLR generally caused a significant decrease of specific methane yields, as well as one case of severe overloading, i.e. the mono-digestion of juice industry waste, which resulted in instability and ultimately system failure. Sequential feeding with different substrates led to a more equilibrated operation, especially for co-digestion systems, with higher specific methane yields being observed during the phases corresponding to winery waste and juice industry waste substrates. Overall more positive results were obtained in the cases in which the latter substrates were fed to the reactors at process startup.

09 BIOMASS FUELS↗
DOE OSTI2014

Synthesis and hydration behavior of calcium zirconium aluminate (Ca{sub 7}ZrAl{sub 6}O{sub 18}) cement

Calcium zirconium aluminate (Ca{sub 7}ZrAl{sub 6}O{sub 18}) cements were prepared by solid state reaction and polymeric precursor methods, and their phase evolution, morphology, and hydration behavior were investigated. In polymeric precursor method, a nearly single phase Ca{sub 7}ZrAl{sub 6}O{sub 18} was obtained at relatively lower temperature (1200 °C) whereas in solid state reaction, a small amount of CaZrO{sub 3} coexisted with Ca{sub 7}ZrAl{sub 6}O{sub 18} even at higher temperature (1400 °C). Unexpectedly, Ca{sub 7}ZrAl{sub 6}O{sub 18} synthesized by polymeric precursor process was the large-sized and rough-shaped powder. The planetary ball milling was employed to control the particle size and shape. The hydration behavior of Ca{sub 7}ZrAl{sub 6}O{sub 18} was similar to that of Ca{sub 3}Al{sub 2}O{sub 6} (C3A), but the hydration products were Ca{sub 3}Al{sub 2}O{sub 6}·6H{sub 2}O (C3AH6) and several intermediate products. Thus, Zr (or ZrO{sub 2}) stabilized the intermediate hydration products of C3A.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantification and prediction of solidification textures under additive manufacturing conditions

Crystallographic textures are a major determinant of the macroscale anisotropic properties of polycrystalline metallic alloys produced in a wide range of additive manufacturing (AM) processes. Here, we introduce a statistical method that can accurately quantify the degree of orientational order of textures despite the large random fluctuations in the orientation of individual grains inherent in AM processes. The method, demonstrated for laser and resolidification of AlSi thin films, extends Z-scoring to a dynamical regime to assess the statistical significance of observed textures compared to randomly generated ones at different stages of solidification. We further show that, combined with phase-field modeling, this method can be used to infer fundamental anisotropic properties of the solid-liquid interface that are essential for texture prediction, and are compared here to the results of atomistic simulations. In addition, phase-field modeling reveals that, even at rapid AM solidification rates, the observed 〈110〉-dominated textures in the AlSi thin films are controlled predominantly by the anisotropy of the interface free-energy and sheds light on the physical mechanism of grain competition. These results significantly enhance both the existing tools for the quantification and prediction of AM crystallographic textures and our basic understanding of their formation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Pinning ångström-size solid ionic channels for rare-earth element separation

High-purity rare-earth elements are essential for modern technologies, yet current solvent extraction processes are energy-intensive and environmentally harmful because of inadequate selectivity and ligand toxicity. Although combining size exclusion and binding affinity can improve lanthanide separation, the role of long-range confinement remains underexplored. Here we report lanthanide separation in aqueous systems using extremely confined manganese oxide solid ionic channels with optimized layer spacing. Different lanthanides induce distinct solid-state phase transformations in manganese oxide, creating a strong driving force for separation. Two lanthanide groups, differing by ~1.4 Å in spacing, were identified and confirmed to be stable by density functional theory. The narrower confinement of heavier Group II lanthanides improves cross-group separation by increasing the dehydration barrier for lighter Group I lanthanides without inducing strong binding. Here, we further developed a strategy to pin the confinement dimensions and enhance same-group separation, increasing enrichment factors for La–Nd and La–Pr pairs from 1.6 ± 0.1 and 1.5 ± 0.1 to 5.4 ± 0.1 and 4.2 ± 0.1, respectively.

Chemical engineering↗
DOE OSTI2025

Cobalt–niobium co-doping of indium oxide: structural and adsorption/catalytic properties for CO 2 valorization

The co-doping of the indium oxide structure with cobalt and niobium is attempted using a microemulsion method to produce high-surface-area, mesoporous, functional materials. The co-doping leads to a major nanometric bixbyite oxide phase, with both cations occupying cation positions and affecting the size and shape of the oxide entities. For specific cobalt to niobium atomic ratios, the presence of a second surface phase is encountered. Such a surface phase corresponds to an ill-defined indium hydroxide-type phase. The coexistence of the two phases is a unique phenomenon associated with the presence of both cations, which play a decisive role in promoting the CO 2 adsorption capability of the solids, as well as the valorization of the molecule under dual heat–light excitation. The co-doping of indium oxide thus appears to be a unique way to intensify the analogous thermal (classical) catalytic process for the elimination/valorization of carbon dioxide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Structure and Hardness of Ceramics Produced through High-Temperature Nitridation of Titanium Foil

We have studied the variation in the phase composition, elemental composition, and microstructure of rolled titanium samples during thermal annealing in a nitrogen atmosphere at 1300, 1500, 1700, and 2000°C. The results demonstrate that the nitridation process can yield compact titanium nitride-based ceramics or TiN/TiN{sub x}/α-Ti〈N〉 heterostructures. X-ray diffraction data for the near-surface region of the samples before and after nitridation and those for cross-sectional fracture surfaces of heterostructures are used to infer orientation relationships between the TiN phase and α-Ti〈N〉 solid solution. Scanning electron microscopy results for cross-sectional fracture surfaces indicate that complete nitridation of the samples leads to the formation of a three-layer microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Implementation and Re nement of a Comprehensive Model for Dense Granular Flows

Dense granular ows are ubiquitous in both natural and industrial processes. They manifest three di erent ow regimes, each exhibiting its own dependence on solids volume fraction, shear rate, and particle-level properties. This research project sought to develop continuum rheological models for dense granular ows that bridges multiple regimes of ow, implement them in open-source platforms for gas-particle ows and perform test simulations. The rst phase of the research covered in this project involved implementation of a steady- shear rheological model that bridges quasi-static, intermediate and inertial regimes of ow into MFIX (Multiphase Flow with Interphase eXchanges - a general purpose computer code developed at the National Energy Technology Laboratory). MFIX simulations of dense granular ows in hourglass-shaped hopper were then performed as test examples. The second phase focused on formulation of a modi ed kinetic theory for frictional particles that can be used over a wider range of particle volume fractions and also apply for dynamic, multi- dimensional ow conditions. To guide this work, simulations of simple shear ows of identical mono-disperse spheres were also performed using the discrete element method. The third phase of this project sought to develop and implement a more rigorous treatment of boundary e ects. Towards this end, simulations of simple shear ows of identical mono-disperse spheres con ned between parallel plates were performed and analyzed to formulate compact wall boundary conditions that can be used for dense frictional ows at at frictional boundaries. The fourth phase explored the role of modest levels of cohesive interactions between particles on the dense phase rheology. The nal phase of this project focused on implementation and testing of the modi ed kinetic theory in MFIX and running bin-discharge simulations as test examples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Prototype Development, Testing, and Modeling for a Solar Light-Trapping Planar-Cavity Particle Receiver (LTPCR)

Many applications for concentrating solar thermal power (CSP) technologies of high efficiency power cycles or thermochemical processes require higher operating temperatures and alternative heat transfer media. Inert solid particles for next-generation CSP and reactive gas and/or solid media for solar thermochemical processes are common options; however, these have significantly lower heat transfer capabilities than thermal oil, molten salt, or molten metal media. Conventional solar receivers operating temperatures >700 degrees Celsius face challenges including thermal performance and thermal-mechanical issues. To overcome these limitations, we have developed a novel light-trapping, planar-cavity receiver (LTPCR) that can heat solid-phase media within an enclosed receiver while maintaining a high aperture solar flux concentration for high efficiency. This paper presents progress on design, fabrication, and testing of a 100 kWt prototype receiver to demonstrate the LTPCR operability and its commercial feasibility.

14 SOLAR ENERGY↗
DOE OSTI2015

Chemical composition, microstructure, and hygroscopic properties of aerosol particles at the Zotino Tall Tower Observatory (ZOTTO), Siberia, during a summer campaign

In this study we describe the hygroscopic properties of accumulation- and coarse-mode aerosol particles sampled at the Zotino Tall Tower Observatory (ZOTTO) in Central Siberia (61° N; 89° E) from 16 to 21 June 2013. The hygroscopic growth measurements were supplemented with chemical analyses of the samples, including inorganic ions and organic/elemental carbon. In addition, the microstructure and chemical composition of aerosol particles were analyzed by X-ray micro-spectroscopy (STXM-NEXAFS) and transmission electron microscopy (TEM). A mass closure analysis indicates that organic carbon accounted for 61 and 38% of PM in the accumulation mode and coarse mode, respectively. The water soluble fraction of organic matter was estimated to be 52 and 8% of PM in these modes. Sulfate, predominantly in the form of ammoniated sulfate, was the dominant inorganic component in both size modes: ~ 34% in the accumulation vs. ~ 47% in the coarse mode. The hygroscopic growth measurements were conducted with a filter-based differential hygroscopicity analyzer (FDHA) over the range of 5–99.4% RH in the hydration and dehydration operation modes. The FDHA study indicates that both accumulation and coarse modes exhibit pronounced water uptake approximately at the same RH, starting at ~ 70%, while efflorescence occurred at different humidities, i.e., at ~ 35% RH for submicron particles vs. ~ 50% RH for supermicron particles. This ~ 15% RH difference was attributed to higher content of organic material in the submicron particles, which suppresses water release in the dehydration experiments. The kappa mass interaction model (KIM) was applied to characterize and parameterize non-ideal solution behavior and concentration-dependent water uptake by atmospheric aerosol samples in the 5–99.4% RH range. Based on KIM, the volume-based hygroscopicity parameter, κ v , was calculated. The κ v, ws value related to the water soluble (ws) fraction was estimated to be ~ 0.15 for the accumulation mode and ~ 0.36 for the coarse mode, respectively. The obtained κ v, ws for the accumulation mode is in good agreement with earlier data reported for remote sites in the Amazon rain forest (κ v ≈ 0.15) and a Colorado boreal forest (κ v ≈ 0.16). We used the Zdanovskii–Stokes–Robinson (ZSR) mixing rule to predict the chemical composition dependent hygroscopicity, κ v, p . The obtained κ v, p values overestimate the experimental FDHA-KIM-derived κ v, ws by factors of 1.8 and 1.5 for the accumulation and coarse modes, respectively. This divergence can be partly explained by incomplete dissolution of the hygroscopic inorganic compounds resulting from kinetic limitations due to a sparingly soluble organic coating. The TEM and STXM-NEXAFS results indicate that aged submicron (>300 nm) and supermicron aerosol particles possess core-shell structures with an inorganic core, and are enriched in organic carbon at the mixed particle surface. The direct FDHA kinetic studies provide a bulk diffusion coefficient of water of ~ 10 −12 cm 2 s −1 indicating a semi-solid state of the organic-rich phase leading to kinetic limitations of water uptake and release during hydration and dehydration cycles. Overall the present ZOTTO data set, obtained in the growing season, has revealed a strong influence of organic carbon on the hygroscopic properties of the ambient aerosols. The sparingly soluble organic coating controls hygroscopic growth, phase transitions, and microstructural rearrangement processes. The observed kinetic limitations can strongly influence the outcome of experiments performed on multi-second time scales, such as the commonly applied HTDMA (Hygroscopicity Tandem Differential Mobility Analyzer) and CCNC (Cloud Condensation Nuclei Counter) measurements.

54 ENVIRONMENTAL SCIENCES↗