SEARCH · Engineering Papers

Results for “slip”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

All sources NASA NTRS DOE OSTI

NASA NTRS1987

AUTOPLAN - A PC-based automated mission planning tool

A PC-based automated mission and resource planning tool, AUTOPLAN, is described, with application to small-scale planning and scheduling systems in the Space Station program. The input is a proposed mission profile, including mission duration, number of allowable slip periods, and requirement profiles for one or more resources as a function of time. A corresponding availability profile is also entered for each resource over the whole time interval under study. AUTOPLAN determines all integrated schedules which do not require more than the available resources.

Paterra, Frank C.↗

NASA NTRS1987

Tectonics of the Nazca-Antarctic plate boundary

A new bathymetric chart of part of the Chile transform system is constructed, based mainly on an R/V Endeavor survey from 100 deg W to its intersection with the East Ridge of the Juan Fernandez microplate. A generally continuous lineated trend can be followed through the entire region, with the transform valley being relatively narrow and well-defined from 109 deg W to approximately 104 deg 30 min W. The fracture zone then widens to the east, with at least two probable en echelon offsets to the south at 104 deg and 102 deg W. Six new strike-slip mechanisms along the Chile Transform and one normal fault mechanism near the northern end of the Chile Rise, inverted together with other plate-motion data from the eastern portion of the boundary, produce a new best-fit Euler pole for the Nazca-Antarctic plate pair, providing tighter constraints on the relative plate motions.

Anderson-Fontana, Sandra↗

NASA NTRS1988

The effects of longitudinal roughness elements upon the turbulent boundary layer

Velocity profiles and bursting statistics were measured in the presence of cylindrical longitudinal roughness elements (LREs) and compared to similar work by Johansen and Smith (1986). An algorithm was devised to detect low speed streaks (LSS) from the hot-wire rake data, allowing an estimation of the LREs' ability to reduce spatial randomness of the sublayer structure. The velocity profiles agree with Johansen and Smith's result that the effects of the LREs are felt only for y(+) less than about 15. The analysis of the bursting statistics and LSS algorithm output shows that the flow relaxes back to a flat plate boundary layer between the LREs. A crude first approximation is that the LREs simply impose the no-slip boundary condition at an elevation equivalent to their diameter. While the LREs might serve as a nucleation site for the LSS, spatial randomness of the structure is affected only very close to the LREs.

Blackwelder, R. F.↗

NASA NTRS1988

Dynamic shear of granular material under variable gravity conditions

This paper describes some experiments with granular materials which recently have been conducted aboard the NASA KC-135 aircraft during variable gravity maneuvers. The main experimental apparatus consisted of a small drum containing granular material which was rotated slowly while the angle assumed by the slip surface with respect to the horizontal was observed and recorded photographically. Conventional wisdom has held that this 'dynamic angle of response' was a material constant, independent of (among other things) gravitational level. The results presented here are quite contrary, suggesting instead an angle that varies with the reciprocal of the square root of gravity. This finding may have important consequences on the understanding of many active processes in Planetary Geology involving granular materials and may provide qualitative confirmation of some of the theoretical predictions of modern models of granular shear flows.

White, B. R.↗

NASA NTRS1987

Eruptions of Pavlof Volcano and their possible modulation by ocean load and tectonic stresses

Data pertaining to the basic features (such as the volume of erupted materials and the rate of mass ejection) of the eruptions of the Pavlof Volcano, Alaska, and the accompanying seismicity were related to other geophysical data, including atmospheric pressure, earth and ocean-load tides, long-period sea level, and ground tilt. A significant correlation was found between the eruptions of the volcano and yearly nontidal variations in sea level, that possibly resulted from ocean loading; volume changes beneath the volcano due to ocean loading were calculated to be from 0.02 to 2 times eruption volumes. It is suggested that the volcano acts as a long-period volume strain meter, with lava being preferentially erupted when strain beneath the volcano is compressive. No eruptions occurred during the period of 1978-1980, when tilt, seismic data, and sea level data indicated that a deep aseismic slip may have occurred. Models of this aseismic event predict a volume increase beneath the volcano that might have compensated strain from magma injection.

Mcnutt, S. R.↗

NASA NTRS1988

Bilateral topographic symmetry patterns across Aphrodite Terra, Venus

Topographic profiles have been obtained across Aphrodite Terra to test for bilateral symmetry of the type associated with thermal boundary layer topography at divergent plate boundaries on earth. In addition to a broad bilateral symmetry at a range of angles across Aphrodite Terra, detailed bilateral symmetry is noted within domains between linear discontinuities in directions parallel to the strike of the discontinuities. The results suggest that western Aphrodite Terra is similar to terrestrial oceanic divergent plate boundary environments, and that the cross-strike discontinuities are analogous to oceanic fracture zones rather than strike-slip faults.

Crumpler, L. S.↗

NASA NTRS1987

The microstructure and tensile properties of extruded melt-spun ribbons of iron-rich B2 FeAl

The microstructure of extruded rods of iron-rich FeAl(B2-structure), as characterized by TEM, SEM, optical microscopy and x-ray diffractometry, consisted of elongated grains with a 111-line fibre texture containing a high dislocation density. Numerous oxide particles were found, mostly in lines which reflected the matrix flow during extrusion. In addition, some large inclusions were present. Tensile testing of annealed, relatively dislocation-free specimens as a function of increasing temperature found increasing ductility up to 900K, above which a ductility drop occurred accompanied by a change in fracture mode, from transgranular cleavage to intergranular fracture. The yield strength, which was independent of temperature up to 800K (at about 500MPa), also decreased rapidly as diffusion became more important. The predominant slip vector changed from 111-line to 100-line around 700K.

Baker, I.↗

NASA NTRS1988

Anisotropic constitutive modeling for nickel base single crystal superalloys using a crystallographic approach

A micromechanical model based on crystallographic slip theory was formulated for nickel-base single crystal superalloys. The current equations include both drag stress and back stress state variables to model the local inelastic flow. Specially designed experiments have been conducted to evaluate the effect of back stress in single crystals. The results showed that (1) the back stress is orientation dependent; and (2) the back stress state variable in the inelastic flow equation is necessary for predicting anelastic behavior of the material. The model also demonstrated improved fatigue predictive capability. Model predictions and experimental data are presented for single crystal superalloy Rene N4 at 982 C.

Stouffer, D. C.↗

NASA NTRS1988

Geodetic measurement of deformation east of the San Andreas Fault in Central California

The shear strain rates in the Diablo Range of California have been calculated, and the slip rate along the Calaveras and Paicines faults in Central California have been estimated, on the basis of triangulation and trilateration data from two geodetic networks located between the western edge of the Great Valley and the San Andreas Fault. The orientation of the principal compressive strain predicted from the azimuth of the major structures in the region is N 25 deg E, leading to an average shear strain value that corresponds to a relative shortening rate of 4.5 + or - 2.4 mm/yr. It is inferred that the measured strain is due to compression across the fold of this area. The hypothesized uniform, fault-normal compression within the Coast Ranges is not supported by these results.

Sauber, Jeanne↗

NASA NTRS1988

Primitive numerical simulation of circular Couette flow - Carrousel wind tunnel nonturbulent solutions

The azimuthal-invariant, three-dimensional cylindrical, incompressible Navier-Stokes equations are solved to steady state for a finite-length, physically realistic model. The numerical method relies on an alternating-direction implicit scheme that is formally second-order accurate in space and first-order accurate in time. The equations are linearized and uncoupled by evaluating variable coefficients at the previous time iteration. Wall grid clustering is provided by a Roberts transformation in radial and axial directions. A vorticity-velocity formulation is found to be preferable to a vorticity-streamfunction approach. Subject to no-slip, Dirichlet boundary conditions, except for the inner cylinder rotation velocity (impulsive start-up) and zero-flow initial conditions, nonturbulent solutions are obtained for sub- and supercritical Reynolds numbers of 100 to 400 for a finite geometry where R(outer)/R(inner) = 1.5, H/R(inner) = 0.73, and H/Delta-R = 1.5. An axially-stretched model solution is shown to asymptotically approach the one-dimensional analytic Couette solution at the cylinder midheight. Flowfield change from laminar to Taylor-vortex flow is discussed as a function of Reynolds number. Three-dimensional velocities, vorticity, and streamfunction are presented via two-dimensional graphs and three-dimensional surface and contour plots.

Hasiuk, Jan↗

NASA NTRS1988

The numerical simulation of transonic separated flow about the complete F-16A

The thin-layer, Reynolds-averaged, Navier-Stokes equations are used to simulate the transonic viscous flow about the complete F-16A fighter aircraft. These computations demonstrate how computational fluid dynamics (CFD) can be used to simulate turbulent viscous flow about realistic aircraft geometries. A zonal grid approach is used to provide adequate viscous grid clustering on all aircraft surfaces. Zonal grids extend inside the F-16A inlet and up to the compressor face while power on conditions are modeled by employing a zonal grid extending from the exhaust nozzle to the far field. A simple solution adaptive grid procedure is used on the wing surface and good agreement with experimental data is obtained. Computations for the F-16A in side slip are also presented.

Flores, Jolen↗

NASA NTRS1988

Navier-Stokes structure of merged layer flow on the spherical nose of a space vehicle

Hypersonic merged layer flow on the forepart of a spherical surface of a space vehicle has been investigated on the basis of the full steady-state Navier-Stokes equations using slip and temperature jump boundary conditions at the surface and free-stream conditions far from the surface. The shockwave-like structure was determined as part of the computations. Using an equivalent body concept, computations were carried out under conditions that the Aeroassist Flight Experiment (AFE) Vehicle would encounter at 15 and 20 seconds in its flight path. Emphasis was placed on understanding the basic nature of the flow structure under low density conditions. Particular attention was paid to the understanding of the structure of the outer shockwave-like region as the fluid expands around the sphere. Plots were drawn for flow profiles and surface characteristics to understand the role of dissipation processes in the merged layer of the spherical nose of the vehicle.

Jain, A. C.↗

NASA NTRS1988

Friction of ice

Frictional sliding experiments were performed on saw-cut samples of laboratory-made polycrystalline water ice, prepared in the same way as the material used by Kirby et al. (1987) in ice deformation experiments. The data show that the maximum frictional stress is a function of the normal stress but is not measurably dependent on temperature or sliding rate over the ranges covered in these experiments (77-115 K and 0.0003-0.03 mm/s, respectively). The sliding behavior was invariably stick slip, with the sliding surfaces exhibiting only minor gouge development. In samples with anomalously low strength, a curious arrangement of densely packed short vertical fractures was observed. The results of these experiments were applied to a model of near-surface tectonic activity on Ganymede, one of Jupiter's icy moons. The results indicate that a global expansion on Ganymede of 3 linear percent will cause extensional movement on preexisting faults at depths to 7 + or - 3 km.

Beeman, M.↗

NASA NTRS1988

Stagnation flow field analysis for an aeroassist flight experiment vehicle

Continuum methods are used to analyze the stagnation flow field of the aeroassist flight experiment (AFE) vehicle. For the lower altitude portion of an AFE trajectory, the viscous shock-layer equations are employed. At higher altitudes, the full Navier-Stokes equations with chemical nonequilibrium and surface slip are used. Particular attention is given to the effect of surface catalyticity on surface heating, electron number density, and flow field structure.

Gupta, Roop N.↗

NASA NTRS1988

Particle-laden weakly swirling free jets - Measurements and predictions

A theoretical and experimental investigation of particle-laden, weakly swirling, turbulent free jets was conducted. Glass particles, having a Sauter mean diameter of 39 microns with a standard deviation of 15 microns, were used. A single loading ratio of 0.2 was used in the experiments. Measurements are reported for three swirl numbers, ranging from 0.0 to 0.3. The measurements included mean and fluctuating velocities of both phases, and particle mass flux distributions. Measurements were compared with predictions from three types of multiphase flow analysis: locally homogeneous flow (LHF); deterministic separated flow (DSF); and stochastic separated flow (SSF). For the particle-laden jets, the LHF and DSF models did not provide very satisfactory predictions. The LHF model generally overestimated the rate of decay of particle mean axial and angular velocities with streamwise distance, due to the neglect of particle inertia. The LHF model predictions of particle mass flux also showed poor agreement with measurements due to the assumption of no-slip between phases. The DSF model also performed quite poorly for predictions of particle mass flux, because turbulent dispersion of the particles was neglected. The SSF model, which accounts for both particle inertia and turbulent disperison of the particles, yielded reasonably good predictions throughout the flow field for the particle-laden jets.

Bulzan, Daniel L.↗

NASA NTRS1989

Pulse-Population Modulation For Induction Machines

Low-frequency synthesizer developed to provide low-frequency waveform by synthesis from high-frequency power system. Waveform assembled by allowing conduction of discrete half cycles of high-frequency carrier. Frequency of synthesized wave controlled by pulse pattern. By controlling relationship between slip and stator frequencies, one operates induction motor either as motor or generator. Such bidirectional energy transducer used as starter/generator for engine, or as servo-mechanism for control of acceleration and deceleration. Other advantages include operation under controlled voltage-to-frequency ratios to maintain high-efficiency and high power factor, and no reflection of low-frequency noise into 20-kHz distribution bus.

Hansen, Irving G.↗

NASA NTRS1989

Digital Signal Processor For GPS Receivers

Three innovative components combined to produce all-digital signal processor with superior characteristics: outstanding accuracy, high-dynamics tracking, versatile integration times, lower loss-of-lock signal strengths, and infrequent cycle slips. Three components are digital chip advancer, digital carrier downconverter and code correlator, and digital tracking processor. All-digital signal processor intended for use in receivers of Global Positioning System (GPS) for geodesy, geodynamics, high-dynamics tracking, and ionospheric calibration.

Thomas, J. B.↗

NASA NTRS1987

AUTOPLAN: A PC-based automated mission planning tool

Paterra, Frank C.↗