Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Measurements of the Neutron Cross Sections of Hydrogen and Deuterium in H{sub 2}O-D{sub 2}O Mixtures Using the Deep Inelastic Neutron-Scattering Technique

We investigated the neutron cross sections of hydrogen and deuterium by means of the deep inelastic neutron-scattering technique in H{sub 2}O-D{sub 2}O mixtures. The interest in this work was to examine the anomalous behavior in the hydrogen neutron cross section reported in the past in similar experiments that raised a yet unsettled controversy. The measurements were made at the Bariloche pulsed neutron source (Argentina) in pure H{sub 2}O and D{sub 2}O, with mixtures of molar concentrations of deuterium of x{sub D}=0.3 and 0.4, at room temperature, under the same experimental conditions as the former experiments. The results are in good agreement with the standard cross sections and are incompatible with the anomalies pointed out.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Magneto-Mechanical Optimization of Cross-Sections for $ \text{cos}(\theta)$Accelerator Magnets

The cross-section design of cos (θ) superconducting magnets is historically developed in a two-step process: initially, the coil geometry is defined on the basis of magnetic optimizations; then, the structure is designed around the coil. The first step searches for the best coil cross-section maximizing the magnetic field, margin, field quality and conductor efficiency. The latter step aims at limiting the coil stresses and deformations. However, the coil design, defined with the initial magnetic optimization, can influence the mechanical behaviour of the magnet, altering, for example, the peak stress during operation. As the critical current is a function of the applied strain, the mechanical implications of the coil cross-section design can limit the achievable performance. In this paper we propose an integrated optimization process that targets the peak stress on the conductor in addition to the magnetic objectives. Here the results are presented for a sample high-field Nb 3 Sn dipole: a 4-layer design aiming at ultimate conductor performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical models, cross sections, and numerical approximations used in MCNP and GEANT4 Monte Carlo codes for photon and electron absorbed fraction calculation

Purpose: Radiopharmaceutical applications in nuclear medicine require a detailed dosimetry estimate of the radiation energy delivered to the human tissues. Over the past years, several publications addressed the problem of internal dose estimate in volumes of several sizes considering photon and electron sources. Most of them used Monte Carlo radiation transport codes. Despite the widespread use of these codes due to the variety of resources and potentials they offered to carry out dose calculations, several aspects like physical models, cross sections, and numerical approximations used in the simulations still remain an object of study. Accurate dose estimate depends on the correct selection of a set of simulation options that should be carefully chosen. This article presents an analysis of several simulation options provided by two of the most used codes worldwide: MCNP and GEANT4. Methods: For this purpose, comparisons of absorbed fraction estimates obtained with different physical models, cross sections, and numerical approximations are presented for spheres of several sizes and composed as five different biological tissues. Results: Considerable discrepancies have been found in some cases not only between the different codes but also between different cross sections and algorithms in the same code. Maximum differences found between the two codes are 5.0% and 10%, respectively, for photons and electrons.Conclusion: Even for simple problems as spheres and uniform radiation sources, the set of parameters chosen by any Monte Carlo code significantly affects the final results of a simulation, demonstrating the importance of the correct choice of parameters in the simulation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Technical Note: Contrast solution density and cross section errors in inhomogeneity-corrected dose calculation for breast balloon brachytherapy

Purpose: Recent recommendations by the American Association of Physicists in Medicine Task Group 186 emphasize the importance of understanding material properties and their effect on inhomogeneity-corrected dose calculation for brachytherapy. Radiographic contrast is normally injected into breast brachytherapy balloons. In this study, the authors independently estimate properties of contrast solution that were expected to be incorrectly specified in a commercial brachytherapy dose calculation algorithm. Methods: The mass density and atomic weight fractions of a clinical formulation of radiographic contrast solution were determined using manufacturers' data. The mass density was verified through measurement and compared with the density obtained by the treatment planning system's CT calibration. The atomic weight fractions were used to determine the photon interaction cross section of the contrast solution for a commercial high-dose-rate (HDR) brachytherapy source and compared with that of muscle. Results: The density of contrast solution was 10% less than that obtained from the CT calibration. The cross section of the contrast solution for the HDR source was 1.2% greater than that of muscle. Both errors could be addressed by overriding the density of the contrast solution in the treatment planning system. Conclusions: The authors estimate the error in mass density and cross section parameters used by a commercial brachytherapy dose calculation algorithm for radiographic contrast used in a clinical breast brachytherapy practice. This approach is adaptable to other clinics seeking to evaluate dose calculation errors and determine appropriate density override values if desired.

60 APPLIED LIFE SCIENCES↗

Analysis of the cross section for {sup 232}Th photofission in the subbarrier energy region

A theoretical analysis of the most detailed experimental data on the subbarrier fission of {sup 232}Th is performed. The energy dependences of the components of the cross sections for photofission through specific channels characterized by the quantum numbers J{sup {pi}K} are obtained on the basis of previously measured total photofission cross sections and angular distributions of fission fragments. A theoretical analysis of the subbarrier photofission of {sup 232}Th is performed on the basis of the results obtained for these components. This analysis relies on the one-dimensional fission model within which one assumes a three-humped structure of the fission barrier and introduces damping in the second and third wells by including an imaginary part in the potential used. Values are selected for the parameters of the fission barriers and are compared with similar data from other studies. It is shown that the energy dependences of the photofission cross sections in question can be described adequately.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isotopic dependence of the cross section for the induced fission of heavy nuclei

The cross sections for the induced fission of {sup 211-223}Ra, {sup 203-211}Rn, and {sup 221-231}Th nuclei undergoing peripheral collisions with {sup 208}Pb nuclei are calculated on the basis of the statistical model. The role of the N = 126 neutron shell is studied. The level density in excited nuclei is determined within the Fermi gas model and a model that takes into account the collective enhancement of the level density. The inclusion of a particle-hole excitation in addition to a collective Coulomb excitation makes it possible to obtain a satisfactory description of experimental cross sections for the fission of radium isotopes. The calculated ratios of the cross sections for the induced fission of {sup 236}U ({sup 237}U) and {sup 238}U ({sup 239}U) nuclei agree with experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross section for the production of compound nuclei in pBi interaction at energies in the range 20-100 MeV

A method for determining the cross section for compound-nucleus formation, {sigma}{sub CN}, in nuclear reactions initiated by protons of energy in the range 20-100 MeV is proposed. The method is based on measuring cross sections for the yield of isotopes maximally remote from the target nucleus. The applicability of the method is illustrated by applying it to the reaction {sup 209}Bi(p, xn), which is considered by way of example. Data obtained for the cross section {sigma}{sub CN} are compared with the results of calculations performed on the basis of the intranuclear-cascade model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross sections and barriers for nuclear fission induced by high-energy nucleons

The cross sections for the fission of {sup 232}Th, {sup 235,238}U, {sup 237}Np, and {sup 239}Pu target nuclei that was induced by 20- to 1000-MeV neutrons and protons were calculated. The respective calculations were based on the multiconfiguration-fission (MCFx) model, which was used to describe three basic stages of the interaction of high-energy nucleons with nuclei: direct processes (intranuclear cascade), equilibration of the emerging compound system, and the decay of the compound nucleus (statistical model). Fission barriers were calculated within the microscopic approach for isotopic chains formed by 15 to 20 nuclei of the required elements. The calculated fission cross sections were compared with available experimental data. It was shown that the input data set and the theoretical model used made it possible to predict satisfactorily cross section for nuclear fission induced by 20- to 1000-MeV nucleons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparative analysis of cross sections of residual nuclei on separated tin isotopes at a beam energy of protons and deuterons 3.65 GeV/nucleon

The cross sections of residual nuclei in the separated tin isotopes ({sup 112}Sn, {sup 118}Sn, {sup 120}Sn, and {sup 124}Sn), irradiated with proton and deuteron beams with energy 3.65 GeV/nucleon, are investigated. Parametrization by ten parametric semi-empirical formula was conducted with the aim of determining the total cross sections and analyzing the measurement results. The dependence of total inelastic cross sections on the mass number of the target and the structure of the incoming particle was investigated via the comparison of the obtained data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New results of measurement of cross sections for electron-positron annihilation to hadrons with the SND detector at VEPP-2000

A survey of preliminary results of experiments with the SND detector at the VEPP-2000 e{sup +}e{sup −} collider in the energy range of √s = 1000–2000 MeV MeV is presented. The cross sections for the processes e{sup +}e{sup −} → π{sup 0}π{sup 0}γ, e{sup +}e{sup −} → π{sup +}π{sup −}π{sup 0}π{sup 0}, e{sup +}e{sup −} → π{sup +}π{sup −}π{sup 0}, e{sup +}e{sup −} → π{sup +}π{sup −}η, and e{sup +}e{sup −} → pp̄ were measured. The measured cross sections agree with the results of earlier measurements but have a higher precision. The cross section for the process e{sup +}e{sup −} → ηγ in the energy range extending from 1.4 to 2 GeV was measured for the first time. The ratio G{sub E}/G{sub M} for the neutron was measured for the first time in the timelike region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross section for the reaction {sup 115}In(γ, γ′){sup 115m} In in the region of the E1 giant resonance

The cross section for the reaction {sup 115}In(γ, γ′){sub 115m}In was measured for photon energies in the range of E{sub γ} ≅ 4–46 MeV. The parameters of the peak in this cross section near the threshold for the reaction {sup 115}In(γ, n), (E{sub γ}){sub (γ,n)}{sup thr}, were refined. It is shown that, in the cross section for the reaction {sup 115}In(γ, γ′){sup 115m}In at Eγ ∼ 27 MeV, there is no second peak for which δ{sub II}{sup int} would exceed about 0.2δ{sub I}{sup int} for the peak at E{sub γ} ∼ (E{sub γ}){sub (γ,n)}{sup thr}. The possibility of employing this reaction both in studying photonuclear reaction physics and in monitoring bremsstrahlung photons in gamma-activation studies was examined.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

New data on cross sections for partial and total photoneutron reactions on the isotopes {sup 91,94}Zr

Experimental data on {sup 91,94}Zr photodisintegration that were obtained in a beam of quasimonoenergetic annihilation photons by the method of neutron multiplicity sorting are analyzed. It is found that the cross sections for the (γ, 1n), (γ, 2n), and (γ, 3n) reactions on both isotopes do not meet the objective data-reliability criteria formulated earlier. Within the experimental–theoretical method for evaluating partial-reaction cross sections that satisfy these criteria, new data on the cross sections for the aforementioned partial reactions, as well as for the (γ, sn) = (γ, 1n) + (γ, 2n) + (γ, 3n) +... total photoneutron reaction, are obtained for the isotopes {sup 91,94}Zr.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the e{sup +}e{sup –} → ηπ{sup +}π{sup –} cross section in the center-of-mass energy range 1.22–2.00 GeV with the SND detector at the VEPP-2000 collider

In the experiment with the SND detector at the VEPP-2000 e+e– collider the cross section for the process e{sup +}e{sup –} → ηπ{sup +}π{sup –} has been measured in the center-of-mass energy range from 1.22 to 2.00 GeV. Obtained results are in agreement with previous measurements and have better accuracy. The energy dependence of the e{sup +}e{sup –} → ηπ{sup +}π{sup –} cross section has been fitted with the vector-meson dominance model. From this fit the product of the branching fractions B(ρ(1450) → ηπ{sup +}π{sup –})B(ρ(1450) → π{sup +}π{sup –}) has been extracted and compared with the same products for (ρ(1450) → ωΠ{sup 0} and (ρ(1450) → π{sup +}π{sup –} decays. The obtained cross section data have been also used to test the conservation of vector current hypothesis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Taking into Account the Centre-of-Mass Correlations in the Cross Sections for Elastic Scattering of Intermediate Energy Protons on the Exotic Nuclei {sup 6}He and {sup 8}He

We calculate the differential cross sections for proton elastic scattering on the exotic halo nuclei {sup 6}He and {sup 8}He at energies around ~0.7 GeV at the momentum transfers squared up to 0.30 (GeV/c){sup 2} and investigate the influence of the nucleon centre-of-mass correlations on the calculated cross sections. In particular, we show that the approximate account of the centre-of-mass correlations used previously considerably overestimates the cross sections at high values of the momentum transfer.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Model-Free Parametrization of Cross Sections for Cumulative Pion Production on Nuclei in Terms of Stavinsky’s Scale Variable x

A model-free parametrization of invariant differential cross sections for cumulative pion production on nuclei ofmass number in the range of A = 2–210 in the backward hemisphere is obtained in the representation of Stavinsky’s scale variable x on the basis of cross sections available in the literature that were measured for several nuclei and several values of the angle θ at proton-beam energies in the range of E{sub 0} = 9–10 GeV. The use of this parametrization in its applicability region makes it possible to calculate pion-production cross sections in the range of x = 0.25–3.5 to an acceptable degree of precision.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Effect of the Deformation Parameter on the Cross Sections for Reactions: {sup 110}Pd(d,n){sup 111}Ag and {sup 110}Pd(d, 2n){sup 110m}Ag

In this study, we focused on the effects of the deformation parameter on the cross sections. First, the deformation parameters of target nucleus {sup 110}Pd was determined within the interacting boson model (IBM). Later this parameter was used in the TALYS-1.8 code to calculate the cross sections of the {sup 110}Pd(d,n){sup 111}Ag and {sup 110}Pd(d, 2n){sup 110m}Ag reactions. Moreover, other deformation parameters obtained RIPL-3 and TALYS default were used for the cross section calculation. The calculated results were compared with the experimental nuclear reaction data from EXFOR.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Experimental study of the energy dependence of the total cross section for the {sup 6}He + {sup nat}Si and {sup 9}Li + {sup nat}Si reactions

New experimental measurements of the total reaction cross sections for the {sup 6}He + {sup nat}Si and {sup 9}Li + {sup nat}Si processes in the energy range of 5 to 40 A MeV are presented. A modified transmission method based on high-efficiency detection of prompt n–γ radiation has been used in the experiment. A bump is observed for the first time in the energy dependence σ{sub R}(E) at E ∼ 10–30 A MeV for the {sup 9}Li + {sup nat}Si reaction, and existence of the bump in σ{sub R}(E) at E ∼ 10–20 A MeV first observed in the standard transmission experiments is experimentally confirmed for the {sup 6}He + {sup nat}Si reaction. Theoretical analysis of the measured {sup 6}He + {sup nat}Si and {sup 9}Li + {sup nat}Si reaction cross sections is performed within the microscopic double folding model. Disagreement is observed between the experimental and theoretical cross sections in the region of the bump at the energies of 10 to 20 A MeV, which requires further study.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

On the fine structure of spectra of the inelastic-electron-scattering cross section and the Si surface parameter

Reflection electron-energy loss spectra are obtained for a series of Si samples with different crystallographic orientations, prepared under different technological conditions. Using the experimental spectra, the electron energy loss dependences of the product of the mean inelastic free path and differential inelastic electron scattering cross section are calculated. A new technique is suggested for analyzing the spectra of inelastic electron scattering cross section by simulating experimental spectra with the use of the three-parameter Tougaard universal cross section functions. The results of the simulation are used to determine the nature of loss peaks and to calculate the surface parameter.

36 MATERIALS SCIENCE↗