SEARCH · Engineering Papers

Results for “ray trace”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Design of an imaging microscope for soft X-ray applications

An imaging soft X-ray microscope with a spatial resolution of 0.1 micron and normal incidence multilayer optics is discussed. The microscope has a Schwarzschild configuration, which consists of two concentric spherical mirrors with radii of curvature which minimize third-order spherical aberration, coma, and astigmatism. The performance of the Stanford/MSFC Cassegrain X-ray telescope and its relevance to the present microscope are addressed. A ray tracing analysis of the optical system indicates that diffraction-limited performance can be expected for an object height of 0.2 mm.

Hoover, Richard B.↗

NASA NTRS1990

The ionosphere as a focusing lens - A case study involving simultaneous type III solar radio storm measurements from the ISIS 1 and 2 and ISEE 3 satellites

The possibility of using terrestrial ionospheric focusing to improve the directivity of electric dipoles on space missions has been investigated by comparing simultaneous observations of a solar radio storm by the ISIS 1 and ISIS 2 spacecraft, in near earth orbit, and the ISEE 3 spacecraft located beyond the magnetosphere. To this end, a three-dimensional ray tracing in a spherically stratified ionosphere has been carried out for conditions appropriate to the observations by the ISIS spacecraft of a solar radio storm in September 1983. The procedure allows Poynting flux spectral densities measured on ISIS to be converted to spectral densities well outside the ionosphere where they can be compared directly with simultaneous observations on ISEE 3. The results demonstrate good agreement over their common observing frequency range (1-2 MHz).

James, H. G.↗

NASA NTRS1989

Image defects from surface and alignment errors in grazing incidence telescopes

The rigid body motions and low frequency surface errors of grazing incidence Wolter telescopes are studied. The analysis is based on surface error descriptors proposed by Paul Glenn. In his analysis, the alignment and surface errors are expressed in terms of Legendre-Fourier polynomials. Individual terms in the expression correspond to rigid body motions (decenter and tilt) and low spatial frequency surface errors of mirrors. With the help of the Legendre-Fourier polynomials and the geometry of grazing incidence telescopes, exact and approximated first order equations are derived in this paper for the components of the ray intercepts at the image plane. These equations are then used to calculate the sensitivities of Wolter type I and II telescopes for the rigid body motions and surface deformations. The rms spot diameters calculated from this theory and OSAC ray tracing code agree very well. This theory also provides a tool to predict how rigid body motions and surface errors of the mirrors compensate each other.

Saha, Timo T.↗

NASA NTRS1990

Optical modeling for dynamics and control analysis

This paper presents a coordinate-free ray-trace analysis of optical beam trains consisting of mirrors, lenses and reference surfaces. The analysis leads to optical models that can be directly integrated with standard structure and control models for integrated instrument design, analysis and simulation. This capability is required for a coming generation of spaceborn optical instruments which use controlled optical elements supported by flexible structures. New results include analytic formulas for optical sensitivities as functions of structural and control geometric parameters. An example problem calculates a linear (small-motion) optical model, derives optical gains for small- and large-angle controlled mirrors, and shows the propagation of a wavefront.

Redding, David C.↗

NASA NTRS1990

Source of O mode radio emissions from the dayside of Uranus

During the inbound trajectory toward Uranus, the Planetary Radio Astronomy instrument on Voyager 2 observed narrow-band smooth (n-smooth) emission at frequencies centered near 60 kHz and O-mode emission (the dayside source) in a frequency range narrowly confined around 160 kHz. Assuming empirical models of the plasma density for the dayside magnetosphere of Uranus, and using cold plasma theory together with observational constraints, ray-tracing calculations are performed to determine the source location of the O-mode emission. The dayside source appears to originate along magnetic field lines with a footprint near the north magnetic pole. Sources of nightside high-frequency broadband smooth (b-smooth) emission observed by Voyager after encounter are believed to exist near the conjugate footprint of these same field lines. This would indicate that the particle population supplying the free energy source has energies at least as high as a few keV.

Menietti, J. D.↗

NASA NTRS1989

Simulations of light scattering in planetary rings

The current status of efforts to model light scattering in the Uranian and Saturnian rings is briefly reviewed, with an emphasis on the treatment of thin, vertically warped, or clumpy rings. Consideration is given to observations of an opposition surge in the rings (indicating that they are physically thick) and possible reasons for the failure of classical models to predict the forward-scattering characteristics of the B and inner A rings of Saturn, the quadrupole brightness variations in the A ring, the increase in reflectivity with optical depth in the A and B rings, the increase in brightness with solar and observer angle in the B ring, and systematic brightness variations in images of the inner Cassini division. It is pointed out that some of these discrepancies are eliminated by the use of a ray-tracing simulation code which determines the singly scattered light from a layer one or many particles thick.

Dones, L.↗

NASA NTRS1990

Volumetric imaging of space debris using sun microsystem's TAAC-1 application accelerator board

Analysis of space debris requires the researcher to have a three-dimensional spatial framework and understanding. By using computers to image and display the space debris volumes, the researcher is provided with an added visual analysis tool. This paper describes volumetric visualization of space debris. Two imaging approaches are used. The first method visualizes the cube faces of the volumetric image. The second method uses a ray-tracing technique to display surfaces within the volume. Three examples of space debris volumes are described.

Luetkemeyer, Kelly G.↗

NASA NTRS1990

Mutual coupling between circular apertures on an infinite conducting ground plane and radiating into a finite width slab

The problem of electromagnetic coupling between two horns is of interest for the Microwave Reflectometer Ionization Sensor (MRIS) that will be used in the Aeroassist Flight Experiment (AFE). Laboratory measurements of mutual coupling between conical horns (using a flat metallic reflector to simulate a critically dense plasma outside) have shown a strong dependence on the finite dimensions of the shuttle tile over the apertures. Since both, the dielectric tile and the plasma outside the tile reflect microwaves, a study should be done to isolate the two mechanisms so that the MRIS reentry flight data can be interpreted correctly. Once the coupling due to the tile itself is determined then the location of the critial electron number density layers can be determined. As a first attempt to tackle this problem the Geometrical Theory of Diffraction was used to modify the existing solution to mutual coupling between apertures with infinite dielectric sheets. By using the equivalent current method, aperture theory to determine the radiated fields inside the dielectric tiles, and ray tracing the contributions to mutual coupling were determined. Results from two cases with different tile thicknesses have indicated that the main contribution to mutual coupling is due to diffraction from the bottom and top (back and front) wedges.

Christodoulou, Christos↗

NASA NTRS1990

Meteorological effects on long-range outdoor sound propagation

Measurements of sound propagation over distances up to 1000 m were carried out with an impulse sound source offering reproducible, short time signals. Temperature and wind speed at several heights were monitored simultaneously; the meteorological data are used to determine the sound speed gradients according to the Monin-Obukhov similarity theory. The sound speed profile is compared to a corresponding prediction, gained through the measured travel time difference between direct and ground reflected pulse (which depends on the sound speed gradient). Positive sound speed gradients cause bending of the sound rays towards the ground yielding enhanced sound pressure levels. The measured meteorological effects on sound propagation are discussed and illustrated by ray tracing methods.

Klug, Helmut↗

NASA NTRS1990

A noise assessment and prediction system

A system has been designed to provide an assessment of noise levels that result from testing activities at Aberdeen Proving Ground, Md. The system receives meteorological data from surface stations and an upper air sounding system. The data from these systems are sent to a meteorological model, which provides forecasting conditions for up to three hours from the test time. The meteorological data are then used as input into an acoustic ray trace model which projects sound level contours onto a two-dimensional display of the surrounding area. This information is sent to the meteorological office for verification, as well as the range control office, and the environmental office. To evaluate the noise level predictions, a series of microphones are located off the reservation to receive the sound and transmit this information back to the central display unit. The computer models are modular allowing for a variety of models to be utilized and tested to achieve the best agreement with data. This technique of prediction and model validation will be used to improve the noise assessment system.

Olsen, Robert O.↗

NASA NTRS1991

Microwave landing system modeling with application to air traffic control

Compared to the current instrument landing system, the microwave landing system (MLS), which is in the advanced stage of implementation, can potentially provide significant fuel and time savings as well as more flexibility in approach and landing functions. However, the expanded coverage and increased accuracy requirements of the MLS make it more susceptible to the features of the site in which it is located. An analytical approach is presented for evaluating the multipath effects of scatterers that are commonly found in airport environments. The approach combines a multiplane model with a ray-tracing technique and a formulation for estimating the electromagnetic fields caused by the antenna array in the presence of scatterers. The model is applied to several airport scenarios. The reduced computational burden enables the scattering effects on MLS position information to be evaluated in near real time. Evaluation in near real time would permit the incorporation of the modeling scheme into air traffic control automation; it would adaptively delineate zones of reduced accuracy within the MLS coverage volume, and help establish safe approach and takeoff trajectories in the presence of uneven terrain and other scatterers.

Poulose, M. M.↗

NASA NTRS1991

LDEF geometry/mass model for radiation analyses

A 3-D geometry/mass model of Long Duration Exposure Facility (LDEF) was generated to aid in the interpretation of ionizing radiation experiments relative to the influence of varying shielding distributions around the dosimetry, and to allow more definitive calculations and comparisons with the measured data. This model takes into account the major individual structural members of the LDEF spacecraft, the mass in each experiment tray, and, for selected trays containing ionizing radiation dosimetry, major parts within the tray are modeled. The geometry/mass model, together with a ray tracing algorithms, was programmed for use both as a stand alone code in determining 3-D shielding distributions at dosimetry locations, and as a geometry module that can be interfaced with radiation transport codes.

Colborn, B. L.↗

NASA NTRS1989

Spectral calibration analysis of the airborne oceanographic lidar

Efforts were concentrated on the spectral resolution of the Airborne Oceanographic Lidar (AOL). This year's work was targeted towards the analysis of calibration techniques to enable the AOL to measure absolute radiances of both passive and active modes of operation. Absolute spectral calibration of the AOL is necessary in order to fully understand and monitor the sensitivity and stability of the total system. Calibration is also needed to obtain valid surface truth data, with which to improve the accuracy of satellite-borne oceanic color scanners. In particular, accurate measurements of oceanic chlorophyll concentrations rests upon reliable irradiance calibrations of both laser induced and solar induced chlorophyll fluoresence. An analysis was performed on the spectral calibration methods used by the AOL. The optical path of the instrumentation was examined to study how the radiance from a calibration sphere was influenced. Ray tracing analysis was performed, including the Cassegrain-telescope optics. It was determined that the calibration radiance was significantly effected by optical-defocusing, due to close positioning of the calibration sphere with respect to the telescope. Since the multi-mode usages of the AOL require varying altitudes and trajectories, a computational algorithm was developed to compensate for image distortions of the telescope optics. Secondary mirror blockage, secondary vignetting, and beam divergence was determined, in order to account for the actual amount of calibrated flux received at the spectral sensors.

Rousey, Carlton E.↗

NASA NTRS1991

Relationship of optical coating on thermal radiation characteristics of nonisothermal cylindrical enclosures

A numerical ray tracing technique was applied to simulate radiation propagating from various non-isothermal cylindrical cavities to determine the effect of optical coating (surface emissivity). In general, the analysis showed that the optical coating and temperature within a cavity have a significant effect on emitted radiation based on cavity dimension. Temperature thresholds were found to exist where the same optical coating may either reduce or increase cavity performance (apparent emissivity). Parametric values of apparent emissivity results are presented over a wide range of variables to correlate cylindrical cavity radiation for non-uniform cavity emissivity values. A universal curve was developed to aid in selecting wall emissivity values for design considerations.

Baumeister, Joseph F.↗

NASA NTRS1990

Design and analysis of multilayer x ray/XUV microscope

The design and analysis of a large number of normal incidence multilayer x ray microscopes based on the spherical mirror Schwarzschild configuration is examined. Design equations for the spherical mirror Schwarzschild microscopes are summarized and used to evaluate mirror parameters for microscopes with magnifications ranging from 2 to 50x. Ray tracing and diffraction analyses are carried out for many microscope configurations to determine image resolution as a function of system parameters. The results are summarized in three publication included herein. A preliminary study of advanced reflecting microscope configurations, where aspherics are used in place of the spherical microscope mirror elements, has indicated that the aspherical elements will improve off-axis image resolution and increase the effective field of view.

Shealy, David L.↗

NASA NTRS1990

Instantaneous Io flux tube as the source of Jovian DAM - Possible second harmonic emissions

To determine if the source of the Jovian Io-dependent DAM (decametric) emission is along the instantaneous Io flux tube (IIFT), the results of ray-tracing calculations are compared with radio emission data obtained by the Planetary Radio Astronomy instruments on Voyager 1 and 2. RX mode gyroemission at frequencies near the local gyrofrequency and sources along field lines within the active sector between 150 and 270 deg longitude are assumed. The results indicate good agreement with the observations if the source is within 20 deg of the IIFT, but the maximum gyrofrequency of the model magnetic field is smaller than the observed maximum frequency of the DAM for the assumed active field line. While errors in the magnetic-field model coupled with emission at large Doppler shift might explain this discrepancy, a more natural explanation is that the higher-frequency component of the DAM is due to second-harmonic gyroemission.

Menietti, J. D.↗

NASA NTRS1989

En route noise test preliminary results

Preliminary results are reported from ground measurements of noise emitted by a full-scale advanced single-rotation turbofan model mounted on the wing of the NASA Lewis Propfan Test Assessment aircraft during test flights in October 1987. The procedures and instruments employed in the test program are described, and the data are presented in tables. The repeatability of the measurements is shown to be good within one test day, with day-to-day variations attributed to cross-wind convection. Fair agreement is found between these measurements and the predictions of ray-tracing models.

Willshire, William L., Jr.↗

NASA NTRS1990

Effects of off-axis radiation on reflective concentrating systems for space power

Off-axis incident radiation, resulting from misalignment of a concentrator relative to incident solar flux, can potentially result in high flux concentrations at positions other than the design focal point. It is suggested that the impact of these concentrations should be considered when choosing materials and thermal control strategies for structures adjacent to the concentrator. A numerical (ray tracing) analysis of the effects of off-axis radiation on the proposed solar concentrator for the Space Station Freedom is performed. The magnitude and position of the reflected flux peaks are identified for a matrix of off-axis angles and target distances. The principles of geometric optics are presented to illustrate that the results of the numerical study are justified, and these results are explained in terms of these basic optical principles. A method that allows prediction of the reflected flux field for a generalized parabolic reflective concentrating system is presented.

Campbell, J. S.↗