Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “process modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Geometric Model for a Parametric Study of the Blended-Wing-Body Airplane

A parametric model is presented for the blended-wing-body airplane, one concept being proposed for the next generation of large subsonic transports. The model is defined in terms of a small set of parameters which facilitates analysis and optimization during the conceptual design process. The model is generated from a preliminary CAD geometry. From this geometry, airfoil cross sections are cut at selected locations and fitted with analytic curves. The airfoils are then used as boundaries for surfaces defined as the solution of partial differential equations. Both the airfoil curves and the surfaces are generated with free parameters selected to give a good representation of the original geometry. The original surface is compared with the parametric model, and solutions of the Euler equations for compressible flow are computed for both geometries. The parametric model is a good approximation of the CAD model and the computed solutions are qualitatively similar. An optimal NURBS approximation is constructed and can be used by a CAD model for further refinement or modification of the original geometry.

Mastin, C. Wayne↗
NASA NTRS2020

An assessment of Earth's climate sensitivity using multiple lines of evidence

We assess evidence relevant to Earth's equilibrium climate sensitivity per doubling of atmospheric CO2, characterized by an effective sensitivity S . This evidence includes feedback process understanding, the historical climate record, and the paleoclimate record. An S value lower than 2 K is difficult to reconcile with any of the three lines of evidence. The amount of cooling during the Last Glacial Maximum provides strong evidence against values of S greater than 4.5 K. Other lines of evidence in combination also show that this is relatively unlikely. We use a Bayesian approach to produce a probability density (PDF) for S given all the evidence, including tests of robustness to difficult‐to‐quantify uncertainties and different priors. The 66% range is 2.6‐3.9 K for our Baseline calculation, and remains within 2.3‐4.5 K under the robustness tests; corresponding 5‐95% ranges are 2.3‐4.7 K, bounded by 2.0‐5.7 K (although such high‐confidence ranges should be regarded more cautiously). This indicates a stronger constraint on S than reported in past assessments, by lifting the low end of the range. This narrowing occurs because the three lines of evidence agree and are judged to be largely independent, and because of greater confidence in understanding feedback processes and in combining evidence. We identify promising avenues for further narrowing the range in S , in particular using comprehensive models and process understanding to address limitations in the traditional forcing‐feedback paradigm for interpreting past changes.

Climate↗
NASA NTRSDate not supplied

ES2Vec: Earth Science Metadata Suggestions and Analogical Reasoning

As the volume of text-based Earth science research grows, it is increasingly possible to discover latent relationships in the literature. However, traditional methodologies are restricted by limited computational capabilities and intractable problem spaces. Advancements in natural language processing (NLP) have allowed us to use an extensive Earth science corpus to create a domain-specific word vector model, Es2Vec, which we have used to surface latent relationships between Earth science concepts and generate improved keyword tags. Earth science metadata keyword assignment is a challenging problem. Dataset curators select appropriate keywords from the Global Change Master Directory (GCMD) set of keywords. The keywords an are integral part of the search and discovery of these datasets. Hence, the selection of keywords is crucial to increasing the discoverability of datasets. Utilizing machine learning techniques, we provide users with automated keyword suggestions to complement manual selection. We trained a machine learning model that leverages the semantic embedding ability of Word2Vec models to process abstracts and suggest relevant keywords. A user interface tool we built to assist data curators in the assignment of such keywords is also described.

word vectors↗
NASA NTRS2021

Informing Improvements in Freeze/Thaw State Classification Using Subpixel Temperature

Freeze/thaw (FT) processes at the earth’s surface can have a considerable effect on global carbon, energy, and hydrologic cycles. Therefore, an accurate representation of FT is valuable to adequately monitor and model these processes. In this study, we assess the relationship between satellite-based FT products and modeled surface and soil temperatures over North America. In addition, hourly land surface temperature (LST) from the Geostationary Operational Environmental Satellite (GOES) system is also compared to FT classifications. Utilizing the higher spatial resolution temperatures (5 km), we assess subgrid-scale variability and its relationship to coarser microwave FT classifications (>25 km). We also examine product agreement and subpixel characteristics across the land cover, climate, and topography. FT classifications are shown to vary widely depending on these variables, leading to an ambiguous definition of frozen and thawed states. Our results suggest that current products can characterize FT transitions with consistent subfreezing surface characteristics in far northern regions (>50 °N). However, uncertainty associated with FT classifications is shown to increase considerably as latitude decreases. Our results also suggest that fractional FT products, utilizing data inputs, such as LST, would provide a considerable improvement in mountainous regions with high intergrid cell heterogeneity, in regions characterized by ephemeral FT events (i.e., regions <40 °N), as well as during freeze and thaw onset periods. This study also provides insight to improving the representation of surface FT state by providing a clearer definition of the subpixel scale temperature characteristics that govern existing frozen classifications.

Earth observing systems↗
NASA NTRS2022

Effects of Increasing the Category Resolution of the Sea Ice Thickness Distribution in a Coupled Climate Model on Arctic and Antarctic Sea Ice Mean State

Many modern sea ice models used in global climate models represent the subgrid-scale heterogeneity in sea ice thickness with an ice thickness distribution (ITD), which improves model realism by representing the significant impact of the high spatial heterogeneity of sea ice thickness on thermodynamic and dynamic processes. Most models default to five thickness categories. However, little has been done to explore the effects of the resolution of this distribution (number of categories) on sea-ice feedbacks in a coupled model framework and resulting representation of the sea ice mean state. Here, we explore this using sensitivity experiments in CESM2 with the standard 5 ice thickness categories and 15 ice thickness categories. Increasing the resolution of the ITD in a run with preindustrial climate forcing results in substantially thicker Arctic sea ice year-round. Analyses show that this is a result of the ITD influence on ice strength. With 15 ITD categories, weaker ice occurs for the same average thickness, resulting in a higher fraction of ridged sea ice. In contrast, the higher resolution of thin ice categories results in enhanced heat conduction and bottom growth and leads to only somewhat increased winter Antarctic sea ice volume. The spatial resolution of the ICESat-2 satellite mission provides a new opportunity to compare model outputs with observations of seasonal evolution of the ITD in the Arctic (ICESat-2; 2018–2021). Comparisons highlight significant differences from the ITD modeled with both runs over this period, likely pointing to underlying issues contributing to the representation of average thickness.

Madison M. Smith↗
NASA NTRS1974

A multiprocessor computer simulation model employing a feedback scheduler/allocator for memory space and bandwidth matching and TMR processing

A computer simulation model for a multiprocessor computer is developed that is useful for studying the problem of matching multiprocessor's memory space, memory bandwidth and numbers and speeds of processors with aggregate job set characteristics. The model assumes an input work load of a set of recurrent jobs. The model includes a feedback scheduler/allocator which attempts to improve system performance through higher memory bandwidth utilization by matching individual job requirements for space and bandwidth with space availability and estimates of bandwidth availability at the times of memory allocation. The simulation model includes provisions for specifying precedence relations among the jobs in a job set, and provisions for specifying precedence execution of TMR (Triple Modular Redundant and SIMPLEX (non redundant) jobs.

Bradley, D. B.↗
NASA NTRS1999

Prototype Tool Support for SEI Process and Risk Knowledge

We have developed a prototype of tool support for risk assessment that uses selected components of the Software Engineering Institute (SEI) information, specifically: Capability Maturity Model (CMM) process activities, CMM process goals and the SEI taxonomy of software project risks.

risk management risk assessment SEI CMM software r↗
NASA NTRS2001

Inferring Instantaneous, Multivariate and Nonlinear Sensitivities for the Analysis of Feedback Processes in a Dynamical System: Lorenz Model Case Study

A new approach is presented for the analysis of feedback processes in a nonlinear dynamical system by observing its variations. The new methodology consists of statistical estimates of the sensitivities between all pairs of variables in the system based on a neural network modeling of the dynamical system. The model can then be used to estimate the instantaneous, multivariate and nonlinear sensitivities, which are shown to be essential for the analysis of the feedbacks processes involved in the dynamical system. The method is described and tested on synthetic data from the low-order Lorenz circulation model where the correct sensitivities can be evaluated analytically.

Aires, Filipe↗
NASA NTRS2022

Soil Moisture Estimation in South Asia via Assimilation of SMAP Retrievals

A soil moisture retrieval assimilation framework is implemented across South Asia in an attempt to improve regional soil moisture estimation as well as to provide a consistent regional soil moisture dataset. This study aims to improve the spatiotemporal variability of soil moisture estimates by assimilating Soil Moisture Active Passive (SMAP) near-surface soil moisture retrievals into a land surface model. The Noah-MP (v4.0.1) land surface model is run within the NASA Land Information System software framework to model regional land surface processes. NASA Modern-Era Retrospective Analysis for Research and Applications (MERRA2) and Global Precipitation Measurement (GPM) Integrated Multi-satellitE Retrievals (IMERG) provide the meteorological boundary conditions to the land surface model. Assimilation is carried out using both cumulative distribution function (CDF)-corrected (DA-CDF) and uncorrected SMAP retrievals (DA-NoCDF). CDF matching is applied to correct the statistical moments of the SMAP soil moisture retrieval relative to the land surface model. Comparison of assimilated and model-only soil moisture estimates with publicly available in situ measurements highlights the relative improvement in soil moisture estimates by assimilating SMAP retrievals. Across the Tibetan Plateau, DA-NoCDF reduced the mean bias and RMSE by 8.4 % and 9.4 %, even though assimilation only occurred during less than 10 % of the study period due to frozen (or partially frozen) soil conditions. The best goodness-of-fit statistics were achieved for the IMERG DA-NoCDF soil moisture experiment. The general lack of publicly available in situ measurements across irrigated areas limited a domain-wide direct model validation. However, comparison with regional irrigation patterns suggested correction of biases associated with an unmodeled hydrologic phenomenon (i.e., anthropogenic influence via irrigation) as a result of SMAP soil moisture retrieval assimilation. The greatest sensitivity to assimilation was observed in cropland areas. Improvements in soil moisture potentially translate into improved spatiotemporal patterns of modeled evapotranspiration, although limited influence from soil moisture assimilation was observed on modeled processes within the carbon cycle such as gross primary production. Improvement in fine-scale modeled estimates by assimilating coarse-scale retrievals highlights the potential of this approach for soil moisture estimation over data-scarce regions.

Jawairia Ahmad↗
NASA NTRS1973

A model of the human in a cognitive prediction task.

The human decision maker's behavior when predicting future states of discrete linear dynamic systems driven by zero-mean Gaussian processes is modeled. The task is on a slow enough time scale that physiological constraints are insignificant compared with cognitive limitations. The model is basically a linear regression system identifier with a limited memory and noisy observations. Experimental data are presented and compared to the model.

Rouse, W. B.↗
NASA NTRS1986

Coupled ice-ocean dynamics in the marginal ice zones Upwelling/downwelling and eddy generation

This study is aimed at modeling mesoscale processes such as upwelling/downwelling and ice edge eddies in the marginal ice zones. A two-dimensional coupled ice-ocean model is used for the study. The ice model is coupled to the reduced gravity ocean model through interfacial stresses. The parameters of the ocean model were chosen so that the dynamics would be nonlinear. The model was tested by studying the dynamics of upwelling. Wings parallel to the ice edge with the ice on the right produce upwelling because the air-ice momentum flux is much greater than air-ocean momentum flux; thus the Ekman transport is greater than the ice than in the open water. The stability of the upwelling and downwelling jets is discussed. The downwelling jet is found to be far more unstable than the upwelling jet because the upwelling jet is stabilized by the divergence. The constant wind field exerted on a varying ice cover will generate vorticity leading to enhanced upwelling/downwelling regions, i.e., wind-forced vortices. Steepening and strengthening of vortices are provided by the nonlinear terms. When forcing is time-varying, the advection terms will also redistribute the vorticity. The wind reversals will separate the vortices from the ice edge, so that the upwelling enhancements are pushed to the open ocean and the downwelling enhancements are pushed underneath the ice.

Hakkinen, S.↗
NASA NTRS1998

Choosing Meteorological Input for the Global Modeling Initiative Assessment of High Speed Aircraft

The Global Modeling Initiative (GMI) science team is developing a three dimensional chemistry and transport model (CTM) to be used in assessment of the atmospheric effects of aviation. Requirements are that this model be documented, be validated against observations, use a realistic atmospheric circulation, and contain numerical transport and photochemical modules representing atmospheric processes. The model must also retain computational efficiency to be tractable to use for multiple scenarios and sensitivity studies. To meet these requirements, a facility model concept was developed in which the different components of the CTM are evaluated separately. The first use of the GMI model will be to evaluate the impact of the exhaust of supersonic aircraft on the stratosphere. The assessment calculations will depend strongly on the wind and temperature fields used by the CTM. Three meteorological data sets for the stratosphere are available to GMI: the National Center for Atmospheric Research Community Climate Model (CCM2), the Goddard Earth Observing System Data Assimilation System (GEOS DAS), and the Goddard Institute for Space Studies general circulation model (GISS). Objective criteria were established by the GMI team to identify the data set which provides the best representation of the stratosphere. Simulations of gases with simple chemical control were chosen to test various aspects of model transport. The three meteorological data sets were evaluated and graded based on their ability to simulate these aspects of stratospheric measurements. This paper describes the criteria used in grading the meteorological fields. The meteorological data set which has the highest score and therefore was selected for GMI is CCM2. This type of objective model evaluation establishes a physical basis for interpretation of differences between models and observations. Further, the method provides a quantitative basis for defining model errors, for discriminating between different models, and for ready re-evaluation of improved models. These in turn will lead to a higher level of confidence in assessment calculations.

Douglas, A. R.↗
NASA NTRS1999

Choosing Meteorological Input for the Global Modeling Initiative Assessment of High Speed Aircraft

The Global Modeling Initiative (GMI) science team is developing a three dimensional chemistry and transport model (CTM) to be used in assessment of the atmospheric effects of aviation. Requirements are that this model be documented be validated against observations, use a realistic atmospheric circulation, and contain numerical transport and photochemical modules representing atmospheric processes. The model must also retain computational efficiency to be tractable to use for multiple scenarios and sensitivity studies. To meet these requirements, a facility model concept was developed in which the different components of the CTM are evaluated separately. The first use of the GMI model will be to evaluate the impact of the exhaust of supersonic aircraft on the stratosphere. The assessment calculations will depend strongly on the wind and temperature fields used by the CTM. Three meteorological data sets for the stratosphere are available to GMI: the National Center for Atmospheric Research Community Climate Model (CCM2), the Goddard Earth Observing System Data Assimilation System (GEOS DAS), and the Goddard Institute for Space Studies general circulation model (GISS). Objective criteria were established by the GMI team to identify the data set which provides the best representation of the stratosphere. Simulations of gases with simple chemical control were chosen to test various aspects of model transport. The three meteorological data sets were evaluated and graded based on their ability to simulate these aspects of stratospheric measurements. This paper describes the criteria used in grading the meteorological fields. The meteorological data set which has the highest score and therefore was selected for GMI is CCM2. This type of objective model evaluation establishes a physical basis for interpretation of differences between models and observations. Further, the method provides a quantitative basis for defining model errors, for discriminating between different models, and for ready re-evaluation of improved models. These in turn will lead to a higher level of confidence in assessment calculations.

Douglass, A. R.↗
NASA NTRSDate not supplied

Tracking the Hunga Tonga-Hunga Ha’apai Eruption Stratospheric Aerosol and Trace Gas Plumes Using Machine Learning

On January 15, 2022, the Hunga Tonga-Hunga Ha’apai (hereafter, Hunga Tonga) submarine volcano had an explosive eruption that thrusted ash, gases, and water vapor through the troposphere into the stratosphere and mesosphere. Previous studies manually tracked the aerosol and trace gas plumes over time across different positions in the southern hemisphere. Using data retrieved from low earth orbiting satellite instruments (e.g., OMPS, OMI, and CALIPSO), this research demonstrates how open-source machine learning (ML) models, like Meta’s Segment Anything Model (SAM), with prompt engineering can perform automatic plume tracking following the Hunga Tonga eruption. This extensible methodology, and modular data processing and modeling pipeline using NASA Earthdata and Openscapes, establishes a framework for systematically and rapidly studying extreme events, including volcanic eruptions and large-scale wildfires. By combining advanced machine learning techniques, such as SAM’s zero-shot learning, with large volumes of remote sensing data, this work demonstrates how AI and open science can accelerate research and generate actionable results. The tools and technologies presented here can help translate earth science to action from NASA’s current and future Earth observing satellite missions (e.g., the Atmosphere Observing System (AOS)), and assist researchers and stakeholders in understanding, mapping, and responding to natural disasters and extreme events in a changing world.

David M. Giles↗
NASA NTRS2010

J-2X Test Articles Using FDM Process

This viewgraph presentation gives a brief history of the J-2X engine, along with detailed description of the material demonstrator and test articles that were created using Fused Deposition Modeling (FDM) process.

Anderson, Ted↗
NASA NTRS1998

On-Line Robust Modal Stability Prediction using Wavelet Processing

Wavelet analysis for filtering and system identification has been used to improve the estimation of aeroservoelastic stability margins. The conservatism of the robust stability margins is reduced with parametric and nonparametric time- frequency analysis of flight data in the model validation process. Nonparametric wavelet processing of data is used to reduce the effects of external disturbances and unmodeled dynamics. Parametric estimates of modal stability are also extracted using the wavelet transform. Computation of robust stability margins for stability boundary prediction depends on uncertainty descriptions derived from the data for model validation. The F-18 High Alpha Research Vehicle aeroservoelastic flight test data demonstrates improved robust stability prediction by extension of the stability boundary beyond the flight regime. Guidelines and computation times are presented to show the efficiency and practical aspects of these procedures for on-line implementation. Feasibility of the method is shown for processing flight data from time- varying nonstationary test points.

Brenner, Martin J.↗
NASA NTRS1977

Chemical compositions of the moon, earth, and eucrite parent body

Model compositions of the moon and earth were calculated on the assumption that these planets had experienced chondrite-like nebular fractionation processes. The model correctly predicts the abundance ratios of certain volatile/refractory element pairs (e.g., Cd/Ba, Ga/La, Sn/Th, and Pb/U), the density of the moon, and the major rock types. The model is also used to reconstruct the composition of the parent eucrite body, which resembles the moon except for a lower content of refractory elements.

Anders, E.↗
NASA NTRS1983

Analysis and correlation of the test data from an advanced technology rotor system

Comparisons were made of the performance and blade vibratory loads characteristics for an advanced rotor system as predicted by analysis and as measured in a 1/5 scale model wind tunnel test, a full scale model wind tunnel test and flight test. The accuracy with which the various tools available at the various stages in the design/development process (analysis, model test etc.) could predict final characteristics as measured on the aircraft was determined. The accuracy of the analyses in predicting the effects of systematic tip planform variations investigated in the full scale wind tunnel test was evaluated.

Jepson, D.↗