Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pressure gradient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Representation of turbulent shear stress by a product of mean velocity differences

A quadratic form in the mean velocity for the turbulent shear stress is presented. It is expressed as the product of two velocity differences whose roots are the maximum velocity in the flow and a cutoff velocity below which the turbulent shear stress vanishes. Application to pipe and channel flows yields the centerline velocity as a function of pressure gradient, as well as the velocity profile. The flat plate, boundary-layer problem is solved by a system of integral equations to obtain friction coefficient, displacement thickness, and momentum-loss thickness. Comparisons are made with experiment.

Braun, W. H.↗
NASA NTRS1977

Investigation of supersonic turbulent boundary-layer separation on a compression ramp by an integral method

An investigation was made to determine the feasibility of using a boundary layer integral method to study the separation of a turbulent boundary layer on a two dimensional ramp at supersonic speeds. The numerical calculations were made for a free stream Mach number of 3, a Reynolds number of 10 million, and over a ramp angle range from 0 deg to 30 deg. For ramp angles where no flow separation was indicated, theoretical calculations were in reasonable agreement with experimental data except for a somewhat belated rise in pressure. For larger ramp angles, where separation was present, the investigation produced results that were not in agreement with experiment or with results calculated by time dependent Navier-Stokes methods. This apparently was true because no provision had been made for a proper shock boundary layer interaction where strong normal pressure gradients are induced within the boundary layer under the shock independent of surface curvature effects.

Patel, D. K.↗
NASA NTRS1976

Improved interactive calculation procedure for supersonic flows

An interactive numerical procedure has been developed for supersonic viscous flows (either two-dimensional or axisymmetric configurations). The flow field is divided into two regions: (1) an inner region which is highly viscous and mostly subsonic, and (2) an outer region where the flow is supersonic and in which viscous effects are small, but not negligible. This paper presents a detailed description of: I. Outer Region - numerical solution obtained by applying the method of characteristics to a system of equations which includes viscous and conduction transport terms only normal to the streamlines; II. Inner Region - treated by a system of equations of the boundary-layer type that includes higher order effects, such as longitudinal and transverse curvature and normal pressure gradients (equations are coupled and solved simultaneously in physical coordinates, using an implicit finite-difference scheme); III. Interactive Procedure - in the interaction mode, the two regions are coupled iteratively along a matching line, where the Mach number is of the order of 1.2.

Tassa, Y.↗
NASA NTRS1977

A critique of some recent second-order turbulence closure models for compressible boundary layers

Computations based on two recently developed second-order turbulence closure models are compared with a series of boundary-layer experiments and with predictions of these experiments using an algebraic mixing length model. One of the models employs an eddy viscosity, whereas the other evaluates components of the Reynolds stress tensor. For flat plates, the computations are compared with the van Driest skin-friction transformation to assess the handling of compressibility. For boundary layers in pressure gradients, four experiments at Mach 4 and one at Mach 6.7 are used as the bases for comparison. In general, both models represent mean velocities and skin friction reasonably well, but represent the turbulence shear stress less accurately.

Rubesin, M. W.↗
NASA NTRS1977

Experiments on transonic and supersonic turbulent boundary-layer separation

Results of experimental investigations into turbulent boundary-layer behavior under the influence of pressure gradients and with separation are presented for transonic and supersonic flow fields. In the transonic case, an axisymmetric model was implemented consisting of an annular circular arc bump affixed to a circular cylinder aligned with the flow direction. For the supersonic separation study, an oblique shock wave impinging on the wind tunnel wall boundary layer was employed to cause separation. The mean streamwise and normal velocity components as well as the respective turbulence intensities were obtained with a two-color frequency shifted laser velocimeter.

Bachalo, W. D.↗
NASA NTRS1977

Features of a separating turbulent boundary layer in the vicinity of separation

Laser anemometer measurements using a directionally sensitive system were obtained for a nominally two-dimensional separating turbulent boundary layer produced by an adverse pressure gradient. An airfoil-type flow was generated in which the flow was accelerated and then decelerated until separation. The results include the skin friction, mean velocity profiles, turbulent shear stresses and intensities, spectra, dissipation rate, turbulent/non-turbulent interfacial intermittency, and eddy speeds.

Simpson, R. L.↗
NASA NTRS1977

An experimental estimate of the O/+/-O resonant charge transfer cross section, collision frequency, and energy transfer rate

The resonant-charge-transfer cross section dominates the interaction between neutral and ionized atomic oxygen at temperatures greater than several hundred degrees Kelvin. This cross section is of direct importance to F-region studies of ion diffusion, ion thermal balance, and neutral atmospheric winds and pressure gradients, since it determines collision frequencies and energy and momentum transfer rates. However, the uncertainty in this cross section is roughly 25-40%. Incoherent-scatter measurements allow determination of the product of the atomic oxygen concentration multiplied by the cross section. If present-day atmospheric models are accepted as statistically representative of F-region atomic oxygen concentrations experimental (aeronomical) data presented indicate that the resonant-charge-transfer cross section is about 1.3 times greater than the value presently in general use, though in excellent agreement with the only other available (laboratory) experimental value. This revised cross section has obvious implications for thermospheric studies.

Carlson, H. C.↗
NASA NTRS1977

A novel concept for subsonic inlet boundary-layer control

A self-bleeding method for boundary layer control is described and tested for a subsonic inlet designed to operate in the flowfield generated by high angles of attack. Naturally occurring surface static pressure gradients are used to remove the boundary layer from a separation-prone region of the inlet and to reinject it at a less critical location with a net performance gain. The results suggest that this self-bleeding method for boundary-layer control might be successfully applied to other inlets operating at extreme aerodynamic conditions.

Miller, B. A.↗
NASA NTRS1977

A critical evaluation of invariant second-order closure models for subsonic boundary layers

Computations based on several second-order turbulence models, including full Reynolds stress and two-equation models, are compared with a number of boundary-layer experiments. In general, the models represent the data reasonably well, with skin friction tending to be somewhat overpredicted in the far downstream region of the adverse pressure gradient experiments. A discussion of the behavior of the ARAP full Reynolds stress model in predicting the components of the Reynolds stress tensor is given. It is concluded that compatibility at the wall may necessitate the use of more than one length scale.

Rubesin, M. W.↗
NASA NTRS1977

A length-scale model for developing turbulent flow in a rectangular duct

A three-dimensional mixing length model is proposed for modeling local Reynolds stress behavior in rectangular ducts of arbitrary aspect ratio. The model is applicable to both developing and fully-developed flows, and can be applied to other 90-degree corner flows with mild streamwise pressure gradients. Comparisons between theory and experiment show that all components of the Reynolds stress tensor are modeled reasonably well, both in the vicinity of a corner and in two-dimensional regions away from the corner.

Gessner, F. B.↗
NASA NTRS1977

Theory of viscous transonic flow over airfoils at high Reynolds number

This paper considers viscous flows with unseparated turbulent boundary layers over two-dimensional airfoils at transonic speeds. Conventional theoretical methods are based on boundary layer formulations which do not account for the effect of the curved wake and static pressure variations across the boundary layer in the trailing edge region. In this investigation an extended viscous theory is developed that accounts for both effects. The theory is based on a rational analysis of the strong turbulent interaction at airfoil trailing edges. The method of matched asymptotic expansions is employed to develop formal series solutions of the full Reynolds equations in the limit of Reynolds numbers tending to infinity. Procedures are developed for combining the local trailing edge solution with numerical methods for solving the full potential flow and boundary layer equations. Theoretical results indicate that conventional boundary layer methods account for only about 50% of the viscous effect on lift, the remaining contribution arising from wake curvature and normal pressure gradient effects.

Melnik, R. E.↗
NASA NTRS1977

Gravitational effects on chemically reacting laminar boundary layer flows over a horizontal flat plate

A theoretical study of the chemically reacting laminar boundary layer flow over a horizontal flat plate with gravitationally induced buoyant force is presented. A diffusion flame sheet model was used to describe the combustion process. The effects of gravity on the purely force convection flow can be characterized by a dimensionless coordinate quantity, which is involved in the generation of the governing equations. A numerical solution of the zero and first order governing equations subject to the appropriate physical boundary conditions was obtained. It is shown that the cross stream buoyancy induced body force acts effectively to produce a streamwise pressure gradient in the fluid adjacent to the plate surface. It is concluded that buoyancy plays an important role in boundary layer diffusion flames.

Lavid, M.↗
NASA NTRS1979

Static-pressure probe for small geometries

Contoured pressure probe with static orifices located near tip is more effective than conventional probes in taking measurements in small high-Reynolds number geometries such as nozzles or flow inlets. Probe is less sensitive to pressure gradients and off axis variations in flow directions over short distances.

Pinckney, S. Z.↗
NASA NTRS1977

Reducing secondary losses by blowing cold air in a turbine

Local blowing on the profile suction side of the turbine guide wheel blades can be effective in preventing the propagation of secondary flows that is, the transport of casing and hub boundary layers by pressure gradients. Some preliminary results on how the blowing should be accomplished in order to influence the secondary flows in the desired manner are given. The effectiveness of blowing is demonstrated. Blowing is also seen to be more effective than using boundary layer slots as far as diminishing losses in the rim zones is concerned.

Koschel, W.↗
NASA NTRS1977

Investigation of compressible vortex flow characteristics

The nature of intense air vortices was studied and the factors which determine the intensity and rate of decay of both single and pairs of vortices were investigated. Vortex parameters of axial pressure differential, circulation, outflow rates, separation distance and directions of rotation were varied. Unconfined vortices, generated by a single rotating cage, were intensified by an increasing axial pressure gradient. Breakdown occurred when the axial gradient became negligible. The core radius was a function of the axial gradient. Dual vortices, generated by two counterrotating cages, rotated opposite to the attached cages. With minimum spacing only one vortex was formed which rotated in a direction opposite to the attached cage. When one cage rotated at half the speed of the other cage, one vortex formed at the higher speed cage rotating in the cage direction.

Muirhead, V. U.↗
NASA NTRS1977

Injection of coal by screw feed

The use of the screw feeder for injecting solids through a 20 to 30 psi barrier is common practice in the cement making industry. An analytical extrapolation of that design, accounting for pressure holding characteristics of a column of solids, shows that coal can be fed to zones at several hundred psi with minimal or no loss of gas. A series of curves showing the calculated pressure gradient through a moving column of solids is presented. Mean particle size, solids velocity, and column length are parameters. Further study of this system to evaluate practicality is recommended.

Fisher, R.↗
NASA NTRS1977

Calculation of three-dimensional compressible turbulent boundary layers

From comparisons of high speed data with low speed closure procedures using variable mean density, there does not appear to be any appreciable influence of compressibility upon turbulent shear stress modeling in compressible turbulent boundary layers, even for extreme cases such as Mach 14 to 20 with a change in density across the layer of up to a factor of 100. Other evidence of apparent lack of compressibility caused new physics which may alter the shear stress for the compressible boundary layer cases including: (1) fluctuation Mach number was generally less than 1; (2) the shear stress distribution through the boundary layer was not a function of Mach number for zero pressure gradient flows; (3) the Morkovin hypothesis was valid up to Mach 5 (based on fluctuation data); (4) profile N power was not a function of Mach number, at least up to Mach 10; and (5) the nondimensional burst period was approximately the same as that for low speed.

Source record↗
NASA NTRS1977

Atmospheric model development in support of SEASAT. Volume 3: Prediction models

As part of the SEASAT program of NASA, a set of four hemispheric, atmospheric models are developed. The four models use a polar stereographic grid in the horizontal and a sigma coordinate in the vertical. Conservation forms of the difference equations are integrated using either a fifteen or four minute time step on a 381 km or 127 km grid (at 60 deg N) for the 63 x 63 or 187 x 187 models respectively. A nonlinear pressure smoother is used along with momentum and temperature diffusion to help control computational noise. The horizontal boundary conditions are insulated slippery walls. Centered time differencing with time averaging of the pressure gradient force term in the momentum equations is used. Robert time filtering on of the temperature and moisture solutions is used for computational stability. The moisture and heat source/sink terms are modeled. Terms representing evaporation and large scale condensation, sensible heat exchange, parameterized cumulus convection and precipitation, and solar and terrestrial radiation are included. Initialization of the models is based on a pattern conservation technique to obtain objective analysis of the state parameter structure from the surface to 50 mb.

Wellck, R. E.↗