Inductive Pulsed Plasma Thruster Model with Time-Evolution of Energy and State Properties
No abstract available
Polzin, K. A.↗
SEARCH · Engineering Papers
Results for “plasma properties”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Structure and properties of Jupiter's magnetoplasmadisc
Voyager 1 plasma-wave observations have revealed the existence of an earthlike continuum radiation trapped in Jupiter's magnetospheric cavity at frequencies below the solar-wind plasma frequency. This radiation serves as an accurate diagnostic of the local electron number density throughout most of Jupiter's outer magnetosphere and yields information regarding the gross configuration of the magnetoplasmadisk as well as its kinematical properties. Magnetic-field observations are used to construct radial profiles of plasma pressure, density, and temperature from 20-80 Jupiter radii in the early-morning plasma sheet, along with plasma-sheet crossings and estimated thicknesses. The study suggests that hot protons (about 10 keV) are the dominant constituents of the plasma sheet (average thickness about 4.2 Jupiter radii) out to 80 Jupiter radii, beyond which centrifugal effects take over and distort the sheet toward the rotational equator.
Barbosa, D. D.↗
Space-resolved spectra of laser-produced plasmas in the XUV
The design and imaging properties of an XUV (extreme ultraviolet, 200-550 A) normal-incidence slitless spectrograph, the spectrum obtained from laser-generated plasmas, and the monochromatic plasma images are described. The electron temperature of the plasmas, electron density as a function of position in the plasma, and the thickness of material penetrated by the laser pulse are determined. Elements from Z = 6 to Z = 28 were investigated, in addition to Nb. Secondary plasma-emission regions were observed 2-3 mm from the flat (thick or thin) targets. Time-integrated photographs of the expanding plasmas were recorded by the slitless spectrograph. A technique for obtaining time-resolved images of the plasmas in picosecond time intervals is proposed, and problems in the design of a stigmatic XUV spectrograph are discussed.
Feldman, U.↗
Carbon dioxide as working gas for laboratory plasmas
Measurements with a RF probe, retarding potential analyzer and mass spectrometer in a laboratory plasma tank were performed using the gases CO2, N2, A and He in order to compare their properties as working gases for laboratory plasma production. The overall result of that CO2 leads to higher plasma densities at lower neutral-gas pressures as well as to a larger Maxwellian component of the electron population, while the electron temperature is lower than that when N2, A and He are used.
Kist, R.↗
Monte carlo method for the calculation of transport properties in a low-density ionized gas
Monte Carlo method for calculation of transport properties in low density ionized gas - application to plasma physics
MONTE CARLO METHOD↗
An explicit, energy-conserving particle-in-cell scheme
We present an explicit temporal discretization of particle-in-cell schemes for the non-relativistic Vlasov equation that results in exact energy conservation when combined with an appropriate spatial discretization. The scheme is inspired by a simple, second-order explicit scheme that conserves energy exactly in the Eulerian context. We show that direct translation to particle-in-cell does not result in strict conservation, but derive a simple correction based on an analytically solvable optimization problem that recovers conservation. While this optimization problem is not guaranteed to have a real solution for every particle, we provide a correction that makes imaginary values extremely rare and still admits $\mathcal{O}$(10 –12 ) fractional errors in energy for practical simulation parameters. We present the scheme in both electrostatic – where we use the Ampère formulation – and electromagnetic contexts. With an electromagnetic field solve, the field update is most naturally linearly implicit, but the more computationally intensive particle update remains fully explicit. Here, we also show how the scheme can be extended to use the fully explicit leapfrog and pseudospectral analytic time-domain (PSATD) field solvers. The scheme is tested on standard kinetic plasma problems, confirming its conservation properties.
Energy conservation↗
Spheroidization of Nd–Fe–B particles
Spherical powders are required for many advanced manufacturing techniques due to their inherent requirement of flowability, either within feed tubes or during powder spreading. As advanced manufacturing of magnets continues to develop, new production methods for feedstocks are also sought. Plasma spheroidization is a high-yield method to produce spherical Nd–Fe–B powders from irregularly shaped particles, with advantages including high throughput and a well-controlled size distribution. Highly spherical Nd–Fe–B powders with large scale production (i.e., kg) have been demonstrated using an inductively coupled thermal plasma system; however, the magnetic properties of the output powder display significant degradation. The coercivity was decreased from the initial 8 kOe (636 kA/m) of the as-received to 0.7 kOe (55 kA/m) for spheroidized powders. Microstructural investigation reveals 6% Nd depletion caused by the extreme temperatures of the plasma, leading to the formation of low-coercivity α-Fe and a subsequent decrease in energy product. In conclusion, post-spheroidization heat treatments with Nd can partially mitigate the coercivity degradation, increasing to 1.7 kOe (135 kA/m), potentially offering a pathway toward spherical powders for a range of applications.
36 MATERIALS SCIENCE↗
Exploring the influence of bulk viscosity of QCD on dilepton tomography
The collective behavior of hadrons and of electromagnetic radiation in heavy-ion collisions has been widely used to study the properties of the quark-gluon plasma (QGP). Indeed this collectivity, as measured by anisotropic flow coefficients, can be used to constrain the transport properties of QGP. The goal of this contribution is to investigate the influence of the specific bulk viscosity (ζ/s) on dilepton production, both at Relativistic Heavy-Ion Collider and Large Hadron Collider energies. We explore the sensitivity of dileptons to dynamical features that bulk viscosity induces on the evolution of a strongly interacting medium, and highlight what makes them a valuable probe in the pursuit to also constrain ζ/s.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Observation of Isolated Structures of the Low Latitude Boundary Layer with the INTERBALL/Tail Probe
We analyze the structure of magnetospheric transients observed at the dusk-side low-latitude magnetopause with the Interball Tail Probe. Ion and magnetic field measurements are used to investigate one particular transient in more detail. This transient has distinct non-symmetric structure with the plasma characteristics and the flow properties of the leading part of the transient being quite different from those in the trailing part of the transient. The region separating these two parts corresponds to the change of the sign in the B(n) component. These observations support an earlier conclusion that some plasma irregularities within the Low Latitude Boundary Layer (LLBL), formed as a result of sporadic reconnection, disconnect from the magnetopause, propagate and dissipate in the magnetosphere, and form what we call Disconnected Magnetosheath Transfer Events (DMTEs).
Vaisberg, 0. L.↗
Space-Time Structured Plasma Waves
Electrostatic waves play a critical role in nearly every branch of plasma physics from fusion to advanced accelerators, to astro, solar, and ionospheric physics. The properties of planar electrostatic waves are fully determined by the plasma conditions, such as density, temperature, ionization state, or details of the distribution functions. Furthermore we demonstrate that electrostatic wave packets structured with space-time correlations can have properties that are independent of the plasma conditions. For instance, an appropriately structured electrostatic wave packet can travel at any group velocity, even backward with respect to its phase fronts, while maintaining a localized energy density. These linear, propagation-invariant wave packets can be constructed with or without orbital angular momentum by superposing natural modes of the plasma and can be ponderomotively excited by space-time structured laser pulses like the flying focus.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Controlled photo-discharge of dust in a complex plasma
One of the limitations in studying dusty plasmas is that many of the important properties of the dust (like the charge) are directly coupled to the surrounding plasma conditions rather than being determined independently. The application of high-intensity ultraviolet (UV) sources to generate discharging photoelectric currents may provide an avenue for developing methods of controlling dust charge. Careful selection of the parameters of the UV source and dust material may even allow for this to be accomplished with minimal perturbation of the background plasma. The Auburn Magnetized Plasma Research Laboratory (MPRL) has developed a ‘proof-of-concept’ experiment for this controlled photo-discharging of dust; a high-intensity, near-UV source was used to produce large changes in the equilibrium positions of lanthanum hexaboride ( $\textrm {LaB}_6$ ) particles suspended in an argon DC glow discharge with negligible changes in the potential, density and temperature profiles of the background plasma. The shifts in equilibrium position of the dust are consistent with a reduction in dust charge. Video analysis is used to quantify the changes in position, velocity and acceleration of a test particle under the influence of the UV and Langmuir probes are used to measure the effects on the plasma.
Physics↗
Saturn's Magnetosphere and Properties of Upstream Flow at Titan: Preliminary Results
Using Cassini Plasma Spectrometer (CAPS) Ion Mass Spectrometer (IMS) measurements, we present the ion fluid properties and its ion composition of the upstream flow for Titan's interaction with Saturn's magnetosphere. A 3D ion moments algorithm is used which is essentially model independent with only requirement is that ion flow is within the CAPS IMS 2(pi) steradian field-of-view (FOV) and that the ion 'velocity distribution function (VDF) be gyrotropic. These results cover the period from TA flyby (2004 day 300) to T22 flyby (2006 363). Cassini's in situ measurements of Saturn's magnetic field show it is stretched out into a magnetodisc configuration for Saturn Local Times (SLT) centered about midnight local time. Under those circumstances the field is confined near the equatorial plane with Titan either above or below the magnetosphere current sheet. Similar to Jupiter's outer magnetosphere where a magnetodisc configuration applies, one expects the heavy ions within Saturn's outer magnetosphere to be confined within a few degrees of the current sheet while at higher magnetic latitudes protons should dominate. We show that when Cassini is between dusk-midnight-dawn local time and spacecraft is not within the current sheet that light ions (H, 142) tend to dominate the ion composition for the upstream flow. If true, one may expect the interaction between Saturn's magnetosphere, locally devoid of heavy ions and Titan's upper atmosphere and exosphere to be significantly different from that for Voyager 1, TA and TB when heavy ions were present in the upstream flow. We also present observational evidence for Saturn's magnetosphere interaction with Titan's extended H and H2 corona which can extend approx. 1 Rs from Titan.
Sittler, E. C., Jr.↗
Materials Characterization at Utah State University: Facilities and Knowledge-base of Electronic Properties of Materials Applicable to Spacecraft Charging
In an effort to improve the reliability and versatility of spacecraft charging models designed to assist spacecraft designers in accommodating and mitigating the harmful effects of charging on spacecraft, the NASA Space Environments and Effects (SEE) Program has funded development of facilities at Utah State University for the measurement of the electronic properties of both conducting and insulating spacecraft materials. We present here an overview of our instrumentation and capabilities, which are particularly well suited to study electron emission as related to spacecraft charging. These measurements include electron-induced secondary and backscattered yields, spectra, and angular resolved measurements as a function of incident energy, species and angle, plus investigations of ion-induced electron yields, photoelectron yields, sample charging and dielectric breakdown. Extensive surface science characterization capabilities are also available to fully characterize the samples in situ. Our measurements for a wide array of conducting and insulating spacecraft materials have been incorporated into the SEE Charge Collector Knowledge-base as a Database of Electronic Properties of Materials Applicable to Spacecraft Charging. This Database provides an extensive compilation of electronic properties, together with parameterization of these properties in a format that can be easily used with existing spacecraft charging engineering tools and with next generation plasma, charging, and radiation models. Tabulated properties in the Database include: electron-induced secondary electron yield, backscattered yield and emitted electron spectra; He, Ar and Xe ion-induced electron yields and emitted electron spectra; photoyield and solar emittance spectra; and materials characterization including reflectivity, dielectric constant, resistivity, arcing, optical microscopy images, scanning electron micrographs, scanning tunneling microscopy images, and Auger electron spectra. Further details of the instrumentation used for insulator measurements and representative measurements of insulating spacecraft materials are provided in other Spacecraft Charging Conference presentations. The NASA Space Environments and Effects Program, the Air Force Office of Scientific Research, the Boeing Corporation, NASA Graduate Research Fellowships, and the NASA Rocky Mountain Space Grant Consortium have provided support.
Dennison, J. R.↗
Toward constraint of ionization-potential depression models in a convergent geometry
We demonstrate the value of inner-shell x-ray absorption spectroscopy for dense-plasma atomic physics and explore the coupling between constraint of the thermodynamic state and constraint of ionization-potential depression models. Synthetic K-shell absorption spectra are generated along a radius from a point-like core and analyzed using different ionization-potential depression models. Within this synthetic analysis framework, we identify plasma conditions (T e = 400 eV, ρ = 40g/cm 3 ) accessible by spherical implosions where K-shell absorption spectra discriminate between models if the material temperature is measured to a precision of 20%. The analysis is extensible to a finite-sized core and can be used to guide future studies of ionization-potential depression, informing material and radiative properties of matter in fusion plasmas and stellar interiors.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Welding arc plasma physics
The problems of weld quality control and weld process dependability continue to be relevant issues in modern metal welding technology. These become especially important for NASA missions which may require the assembly or repair of larger orbiting platforms using automatic welding techniques. To extend present welding technologies for such applications, NASA/MSFC's Materials and Processes Lab is developing physical models of the arc welding process with the goal of providing both a basis for improved design of weld control systems, and a better understanding of how arc welding variables influence final weld properties. The physics of the plasma arc discharge is reasonably well established in terms of transport processes occurring in the arc column itself, although recourse to sophisticated numerical treatments is normally required to obtain quantitative results. Unfortunately the rigor of these numerical computations often obscures the physics of the underlying model due to its inherent complexity. In contrast, this work has focused on a relatively simple physical model of the arc discharge to describe the gross features observed in welding arcs. Emphasis was placed of deriving analytic expressions for the voltage along the arc axis as a function of known or measurable arc parameters. The model retains the essential physics for a straight polarity, diffusion dominated free burning arc in argon, with major simplifications of collisionless sheaths and simple energy balances at the electrodes.
Cain, Bruce L.↗
Ion mixing in the plasma sheet boundary layer by drift instabilities
The linear stability properties of collisionless drift instabilities are analyzed in a Harris equilibrium model of the plasma sheet boundary layer (PSBL). The strearmng ions with drift-type instabilities driven in the PSBL are considered. The fluid approximation leads to growth but predicts that the mode width approaches the gyroradius of the energetic ions. Thus an integral equation theory for the modes is developed taking into account that in the PSBL the curvature drift is weak compared with the grad-B drift. The exact wave particle resonance is kept in the nonlocal response functions. Plasma density, temperature, and magnetic gradient drift motions are taken into account. The drift modes produce an anomalous cross-field momentum transport mixing the PSBL ions on the time scale of tens of seconds. A nonlinear simulation is performed which shows the coalescence of the small scale, fast growing modes into large-scale vortices. The relation between these collective modes and plasma sheet transport phenomena is discussed including the comparison with the competing plasma mixing from single-particle stochasticity.
Horton, W.↗
Plasma expansion layer in the Venus inner ionosheath
We present plasma, magnetic field, and electric field data of the Pioneer Venus Orbiter (PVO) showing that the shocked solar wind in the Venus inner ionosheath exhibits flow conditions substantially different from those in the outer ionosheath. In particular, the plasma density is seen to drop significantly to low values within a layer adjacent to, and downstream from, the planet's ionopause. This change is not seen to develop gradually as the PVO moves into that region of space but occurs abruptly across a well-defined transition which extends downstream along the flanks of the Venus ionosheath. We explore the implications that these observations have in regard to the character of the interaction process between the shocked solar wind and the ionospheric plasma. It is argued that the existence of a sharply bounded region in the inner ionosheath within which the plasma density is severely depressed is consistent with the existence of friction at and near the ionopause. Plasma perturbations generated at this latter boundary, and distributed downstream through the ionosheath flow, may be responsible for the change of properties exhibited by the solar wind plasma in the inner ionosheath.
Perez-De-tejada, H.↗
Magnetron sputter deposition of boron carbide in Ne and Ar plasmas
Conventional magnetron sputter deposition of B 4 C uses Ar as the working gas. In this report we explore the magnetron sputter deposition of B 4 C with a Ne plasma, which is expected to exhibit larger sputtering yields than Ar. We study properties of films deposited with different substrate tilt angles with the magnetron source operated in either direct-current (DC) or radio-frequency (RF) mode in an Ar or Ne plasma. Results show that the B 4 C film properties are determined by a combination of sputtering ballistics and effects of the working gas on the plasma discharge and gas phase scattering of depositing species flux. At constant discharge power, deposition rates for Ar and Ne plasmas are similar, which is attributed to balancing effects of a higher ballistic sputtering yield of Ne and lower ion flux to the target. Both depositing B and C neutral species and bombarding ions have higher energies for the case of Ne plasmas. Films deposited with the RF-driven Ne plasma exhibit a uniform non-columnar structure, lowest oxygen impurity content, and highest mass density and mechanical properties at a cost of Ne incorporation and larger compressive residual stress.
36 MATERIALS SCIENCE↗