Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nuclear shell model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Connecting ground-state properties of 6 Li to each other and to scattering data

We examine the relationship between the asymptotic normalization coefficient (ANC) of 6 Li and other low-energy observables in the α–deuteron system. Our analysis uses a set of calculations carried out within the ab initio no core shell model with continuum (NCSMC) using a variety of inter-nucleon interactions and basis sizes, and yielding 6 Li deuteron separation energies between 1.3 and 1.8 MeV (Hebborn et al 2022 Phys. Rev. Lett. 129 042503). These NCSMC calculations show that the square of the ANC is strongly correlated with the separation energy over this range. In this work, we investigate the origin of this correlation using the phenomenological R-matrix, a single-channel potential and a perturbative approach. We show that this correlation occurs because the depth of the α–deuteron central potential changes by only a small relative amount as the separation energy varies. We then investigate if the ANC can be accurately extracted from α–deuteron phase shifts in an ideal case in which low-energy data are available and there are no experimental errors. We find that both R-matrix and Coulomb-modified effective-range theory (CM-ERE) yield extracted ANCs close to, although not exactly equal to, the NCSMC value, provided the extrapolation is constrained by the known position of the bound-state pole and at least three terms are included in the fit function. The R-matrix approach converges faster than the CM-ERE as the number of parameters increases and is also more robust against the inclusion of low-energy and high-energy phase shift data. Finally, our study also shows that a naive quantification of uncertainties by comparing different truncations used in both theories is not accurate, and suggests the accuracy of ANCs extracted from phase shift data needs further investigation.

R-matrix↗

A Multiple Lines of Evidence Approach for Conceptual Site Models in Performance Assessments - 19070

Demonstration of the long-term performance of remediated radioactive waste sites relies on models that evaluate vadose zone and groundwater flow and contaminant transport for thousands of years. Model qualification, verification, and comparisons with data are essential elements to demonstrating the accuracy of long-term performance assessments (PAs). However, comparisons with data are generally limited due to incomplete characterization data and long-time scales. Since PAs support decision making to assure long-term protection of both human health and the environment, a conceptual site model (CSM) is needed to explain the hydrodynamic behavior and account for subsurface heterogeneities in sufficient detail to support confident decisions. In the case of the Waste Management Area (WMA) C PA, where the focus of the effort is on characterizing flow and transport through a thick vadose zone, site-specific data are sparse and larger-scale geologic descriptions are adopted with the risk of losing small scale features that may affect contaminant transport. Features such as horizontal bedding and sloping interfaces between contrasting material types, as well as vertically oriented features such as clastic dikes, may be difficult to delineate from sparse characterization data, but may affect the extent to which contaminants are transported. The PA conducted to identify long-term impacts associated with the closure of the single-shell tank (SST) farm at WMA C adopted an equivalent homogenous medium approach to represent the major stratigraphic units at the site. This approach explicitly represents major stratigraphic units but assigns hydraulic properties that implicitly account for the presence of small-scale heterogeneities and their impact on flow and contaminant transport to the groundwater. The objective of this study is to evaluate the available site-specific and analogue data that can be used to characterize heterogeneity and to assess its impact on fate and transport of contaminants that may lead to different conclusions when compared to the results of the equivalent homogeneous media approach. To this end, a multiple lines of evidence approach was used to construct alternative CSMs based on an evaluation of several types of data. These data include 1) general characteristics and features of the major stratigraphic units from historical descriptions; 2) borehole geologic logs; 3) particle size distribution measurements; 4) moisture content measurements; 5) spectral gamma data; and 6) concentrations of key constituents (i.e., Tc-99) in both the vadose zone and groundwater impacted by past releases. Based on an analysis of the available data, lines of evidence are evaluated for consistency and integrated in a consistent manner into scientifically defensible CSMs. Numerical models are then used to evaluate the impact that the explicit representation of heterogeneities has on contaminant transport. Together, the field data and the numerical modeling results indicate that heterogeneity caused by the small-scale features do not have a significant (i.e. greater than a factor of 2) impact on transport below WMA C relative to peak concentrations and arrival times for potential releases from waste tanks. The results of this study underscore the value of using multiple lines of evidence based on the quantity and quality of available data in developing alternative CSMs and evaluating their relative impact on key transport metrics such as arrival times and peak concentration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Determination of proton and neutron contributions to the 0$^+_{𝑔⁡𝑠}$ → 2$^+_{1}$ excitations in 42 Si and 44 S using inelastic proton scattering in inverse kinematics and intermediate-energy Coulomb excitation

Here, we have measured the 0$^+_{𝑔⁡𝑠}$ → 2$^+_1$ transition in the neutron-rich 𝑁 = 28 isotope 42 Si using the probes of intermediate-energy Coulomb excitation and inelastic proton scattering in inverse kinematics at the Facility for Rare Isotope Beams with beam particle rates of ≈ 5 particles/s. The results of these two measurements allowed us to determine 𝑀 𝑛 /𝑀 𝑝 , the ratio of the neutron and proton transition matrix elements for the 0$^+_{𝑔⁡𝑠}$ → 2$^+_1$ transition. In addition, we have measured the 0$^+_{𝑔⁡𝑠}$ → 2$^+_1$ transition in the isotone 44 S using inverse kinematics inelastic proton scattering. By comparing the 44 S proton-scattering result with a recent intermediate-energy Coulomb excitation result on the same transition, we were able to determine 𝑀 𝑛 /𝑀 𝑝 for the 0$^+_{𝑔⁡𝑠}$ → 2$^+_1$ transition in this nucleus as well. This work strengthens the evidence that 42 Si has a stable quadrupole deformation in its ground state and that 44 S does not. Both conclusions are further supported by shell-model calculations carried out with the FSU interaction.

39 ≤ A ≤ 58↗

FY 2016 Progress Report on the ANL Sodium Draining and Refilling Experiments

The main incentive for utilization of compact diffusion-bonded sodium-to-CO 2 heat exchangers for a Sodium-Cooled Fast Reactor (SFR) with a supercritical carbon dioxide (sCO 2 ) Brayton cycle power converter is the potential for reduction in heat exchanger size and cost relative to traditional shell-and-tube technology. There is an incentive for the designer to reduce the width of the sodium and CO 2 channels as much as possible to realize the greatest size and cost reductions. However, there are practical limits on minimum channel size due to fundamental phenomena particular to sodium and CO 2 . One is that the channel size must be large enough to enable the rapid draining of sodium from the heat exchanger sodium channels in the event that a sodium leak is detected in an intermediate sodium heat transport system loop, in order to rapidly drain the sodium into the loop sodium storage vessel/tank and thereby limit the sodium mass released that could potentially burn if exposed to air. Information about the minimum sodium channel size can only be obtained by actually draining sodium from representative stainless steel sodium channels under prototypical conditions. It is not possible to obtain such information through modeling and simulation or through simulant experiments. The ANL Sodium Draining and Refilling experiment facility has been designed and is being assembled to obtain data on the draining of sodium from compact diffusion bonded sodium-to-carbon dioxide heat exchanger sodium channels including the mass of sodium drained versus time, the mass of sodium retained inside of the channels, and the potential for sodium to bridge the channel, freeze, and form a plug inside the channel versus the channel size. This information is needed to determine the minimum sodium channel size required to meet the requirements for sodium draining without bridges being left inside of the channels. Initial shakedown testing has been initiated using water and glass tubes before transitioning to sodium and stainless steel test sections. For the latter, the test sections will be heated to promote rapid sodium wetting of the stainless steel prior to draining. Testing with sodium will be initiated in FY 2017.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of the Intelligent, Preventive Infrared (IR) Inspection System Housed in Hybrid Robotic Platforms

Robots and robotic systems that are designed for inspection, environmental study, and health and safety aid are becoming an increasing necessity. However, there is a number of challenges that accompany robots that are designed for these specific applications. These challenges include: navigating compact, enclosed spaces, travelling over multiple terrains and large obstacles, using the proper sensing and detection methods to assess an environment, and the use of lightweight and durable materials. The robotic platforms currently in development look at all of these challenges and attempt to overcome them. These designs specific use of hybrid robotic platforms, or platform that utilizes soft and rigid materials, allows for a more flexible platform and makes environments more navigable. To further improve the navigation of the platforms and environmental assessment, a novel infrared detection system is housed in the platforms to create a robot that can be used for the applications listed above and more. Objectives: Further develop two types of robotic platforms that utilize additive manufacturing, soft materials, and rigid materials. Continue the development of an intelligent and inhibitory infrared detection system based on an artificial intelligence (AI) algorithm. Continued study and fabrication of active soft materials designed for both sensing and actuation in hybrid robotic systems. Improve additive manufacturing fabrication to design rigid and semi-rigid components for hybrid robotic platforms. Transformable Wheel Robotic Platform: The chassis, wheels, tires and inspection system housing use different additive manufacturing techniques for fabrication. Continued work with additive manufacturing has lead to studies in metal-based printing and modular design and manufacturing. The new platform design with integrated electrical component printed. This will allow integration of the sensor housing onto the platform. Electrical components are being tested for battery life and performance. To improve this performance, such as integration of Lithium Polymer (LiPo) batteries. Snake Robotic Platform: The main focus of the development has centered around liquid-based soft actuators. That act on the principles of electrostatic and hydraulic actuation. A liquid dielectric sits between two compliant electrodes, contained by a flexible polymer shell. The electrodes and film gradually collapse toward each other from one corner of the electrode to the other. When the electrodes and film close together, a majority of the fluid is pushed into the area not covered by an electrode. A thin layer of the liquid dielectric remains between the electrode. The actuators will be stacked to cause large displacement, and move the linkages. The chassis of this platform uses purely additively manufactured linkages. Intelligent, Preventive IR Inspection System: Development of the AI for the system has lead to using a Scikit-Learn which assists in creating predictive models based on Regression, clustering, classification etc. To improve the infrared thermometry for low emissivity sources, work on the fabrication of a tandem photoconductive infrared thermometer was a main focus. Distance-Voltage-Temperature response data has been collected in the range of 7 cm - 100 cm and 200-400 deg. C. Modifications were made to the existing test bench to have a better control over the data. Automated data collection was realized using a Python code and an Arduino controlled stepper motor to increase the sample rate. A protective enclosure has been built around the setup to minimize the effect of the environment on the measurements. To better predict temperature, different AI models are being optimized. The regression model, LARS showed a high accuracy but had convergence issues and only works for the current test set-up. Results: The Transformable Wheel Robot has developed into a more flexible and modular platform. With the improvements to the current work, effort on the tire or soft gripper design been a large focus. The soft grippers will be interchange able to allow for increased performance in identified terrain types. The development of the liquid-based actuators allows the snake robotic platform to achieve the goals of being flexible and able to navigate confined spaces. However, there is room for improvement. Optimization work is currently being done in COMSOL Multiphysics. With the current IR system set-up the LARS model perfectly predicts the data; however, considering the mobility aspect of the project other models will allow for an optimized system. Testing of other model types is currently being done.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

FY 2017 Progress Report on the Argonne Sodium Draining and Refilling Experiments

The main incentive for utilization of compact diffusion-bonded sodium-to-CO 2 heat exchangers for a Sodium-Cooled Fast Reactor (SFR) with a supercritical carbon dioxide ( s CO 2 ) Brayton cycle power converter is the potential for reduction in heat exchanger size and cost relative to traditional shell-and-tube technology. There is an incentive for the designer to reduce the width of the sodium and CO 2 channels as much as possible to realize the greatest size and cost reductions. However, there are practical limits on minimum channel size due to fundamental phenomena particular to sodium and CO 2 . One is that the channel size must be large enough to enable the rapid draining of sodium from the heat exchanger sodium channels in the event that a sodium leak is detected in an intermediate sodium heat transport system loop, in order to rapidly drain the sodium into the loop sodium storage vessel/tank and thereby limit the sodium mass released that could potentially burn if exposed to air. Information about the minimum sodium channel size can only be obtained by actually draining sodium from representative wetted stainless steel sodium channels under prototypical conditions. It is not possible to obtain such information through modeling and simulation or through simulant experiments. The ANL Sodium Draining and Refilling experiment facility has been designed and is being assembled to obtain data on the draining of sodium from compact diffusion-bonded sodium-to-carbon dioxide heat exchanger sodium channels including the mass of sodium drained versus time, the mass of sodium retained inside of the channels, and the potential for sodium to bridge the channel, freeze, and form a plug inside the channel versus the channel size. This information is needed to determine the minimum sodium channel size required to meet the requirements for sodium draining without bridges being left inside of the channels. Initial shakedown testing has been initiated using water and glass and plastic tubes before transitioning to sodium and stainless steel test sections. For the latter, the test sections will be heated to high temperature to promote rapid sodium wetting of the stainless steel prior to draining. Testing with sodium will be initiated in FY 2018.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Baseline Risk Assessment Supporting Closure at Waste Management Area C at the Hanford Site Washington

The Office of River Protection under the U.S. Department of Energy is pursuing closure of the Single-Shell Tank (SST) Waste Management Area (WMA) C under the requirements of the Hanford Federal Facility Agreement and Consent Order (HFFACO). A baseline risk assessment (BRA) of current conditions is based on available characterization data and information collected at WMA C. The baseline risk assessment is being developed as a part of a Resource Conservation and Recovery Act (RCRA) Facility Investigation (RFI)/Corrective Measures Study (CMS) at WMA C that is mandatory under Comprehensive Environmental Response, Compensation, and Liability Act and RCRA corrective action. The RFI/CMS is needed to identify and evaluate the hazardous chemical and radiological contamination in the vadose zone from past releases of waste from WMA C. WMA C will be under Federal ownership and control for the foreseeable future, and managed as an industrial area with restricted access and various institutional controls. The exposure scenarios evaluated under these conditions include Model Toxics Control Act (MTCA) Method C, industrial worker, maintenance and surveillance worker, construction worker, and trespasser scenarios. The BRA evaluates several unrestricted land use scenarios (residential all-pathway, MTCA Method B, and Tribal) to provide additional information for risk management. Analytical results from 13 shallow zone (0 to 15 ft. below ground surface) sampling locations were collected to evaluate human health impacts at WMA C. In addition, soil analytical data were screened against background concentrations and ecological soil screening levels to determine if soil concentrations have the potential to adversely affect ecological receptors. Analytical data from 12 groundwater monitoring wells were evaluated between 2004 and 2013. A screening of groundwater monitoring data against background concentrations and Federal maximum concentration levels was used to determine vadose zone contamination impacts on groundwater. Waste Management Area C is the first of the Hanford tank farms to begin the closure planning process. The current baseline risk assessment will provide valuable information for making corrective actions and closure decisions for WMA C, and will also support the planning for future tank farm soil investigation and baseline risk assessments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Search for direct production of electroweakinos in final states with one lepton, jets and missing transverse momentum in pp collisions at $\sqrt{s} $ = 13 TeV with the ATLAS detector

Searches for electroweak production of wino-like chargino pairs, ${\overset{\sim }{\chi}}_1^{+}{\overset{\sim }{\chi}}_1^{-}$, and of wino-like chargino and next-to-lightest neutralino, ${\overset{\sim }{\chi}}_1^{\pm }{\overset{\sim }{\chi}}_2^0$, are presented. The models explored assume that the charginos decay into a W boson and the lightest neutralino, ${\overset{\sim }{\chi}}_1^{\pm}\to {W}^{\pm }{\overset{\sim }{\chi}}_1^0$. The next-to-lightest neutralinos are degenerate in mass with the chargino and decay to ${\overset{\sim }{\chi}}_1^0$ and either a Z or a Higgs boson, ${\overset{\sim }{\chi}}_2^0\to Z{\overset{\sim }{\chi}}_1^0$ or $h{\overset{\sim }{\chi}}_1^0$. The searches exploit the presence of a single isolated lepton and missing transverse momentum from the W boson decay products and the lightest neutralinos, and the presence of jets from hadronically decaying Z or W bosons or from the Higgs boson decaying into a pair of b-quarks. The searches use 139 fb –1 of $\sqrt{s}$ = 13 TeV proton-proton collisions data collected by the ATLAS detector at the Large Hadron Collider between 2015 and 2018. No deviations from the Standard Model expectations are found, and 95% confidence level exclusion limits are set. Chargino masses ranging from 260 to 520 GeV are excluded for a massless ${\overset{\sim }{\chi}}_1^0$ in chargino pair production models. Degenerate chargino and next-to-lightest neutralino masses ranging from 260 to 420 GeV are excluded for a massless ${\overset{\sim }{\chi}}_1^0$ for ${\overset{\sim }{\chi}}_2^0\to Z{\overset{\sim }{\chi}}_1^0$. For decays through an on-shell Higgs boson and for mass-splitting between ${\overset{\sim }{\chi}}_1^{\pm }/{\overset{\sim }{\chi}}_2^0$ and ${\overset{\sim }{\chi}}_1^0$ as small as the Higgs boson mass, mass limits are improved by up to 40 GeV in the range of 200–260 GeV and 280–470 GeV compared to previous ATLAS constraints.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Risk and Performance Analyses Supporting Closure of WMA C at the Hanford Site in Southeast Washington

The Office of River Protection under the U.S. Department of Energy (DOE) is pursuing closure of the Single-Shell Tank (SST) Waste Management Area (WMA) C as stipulated by the Hanford Federal Facility Agreement and Consent Order (HFFACO) under federal requirements and work tasks will be done under the State-approved closure plans and permits. An initial step in meeting the regulatory requirements is to develop a baseline risk assessment representing current conditions based on available characterization data and information collected at the WMA C location. The baseline risk assessment will be supporting a Resource Conservation and Recovery Act of 1976 (RCRA) Field Investigation (RFI)/Corrective Measures Study (CMS) for WMA closure and RCRA corrective action. Complying with the HFFACO conditions also involves developing a long-term closure Performance Assessment (PA) that evaluates human health and environmental impacts resulting from radionuclide inventories in residual wastes remaining in WMA C tanks and ancillary equipment. This PA is being developed to meet the requirements necessary for closure authorization under DOE Order 435.1 and Washington State Hazardous Waste Management Act. To meet the HFFACO conditions, the long-term closure risk analysis will include an evaluation of human health and environmental impacts from hazardous chemical inventories along with other performance Comprehensive Environmental Response, Compensation, and Liability Act Appropriate and Applicable Requirements (CERCLA ARARs) in residual wastes left in WMA C facilities after retrieval and removal. This closure risk analysis is needed to needed to comply with the requirements for permitted closure. Progress to date in developing a baseline risk assessment of WMA C has involved aspects of an evaluation of soil characterization and groundwater monitoring data collected as a part of the RFI/CMS and RCRA monitoring. Developing the long-term performance assessment aspects has involved the construction of detailed numerical models of WMA C using the Subsurface Transport Over Multiple Phases (STOMP©) computer code, the development of a technical approach for abstraction of a range of representative STOMP© simulations into a system-level model based on the GoldSim© system-level model software.The STOMP©-based models will be used to evaluate local-scale impacts and closed facility performance over a sufficient range of simulations to allow for development of the system-level model of the WMA C. The GoldSim©-based system-level model will be used to evaluate overall sensitivity of modeled parameters and the estimate the uncertainty in potential future impacts from a closed WMA C facility.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Subcritical Copper-Reflected-α-phase Plutonium (SCRαP) Integral Experiment Design

A Subcritical Copper-Reflected α-phase Plutonium (SCRαP) integral benchmark experiment is proposed where multiplication will be approximated using correlated neutron data from a detector system consisting of {sup 3}He tubes inside polyethylene. Measurements will be performed on various subcritical experimental configurations consisting of a weapons-grade plutonium sphere surrounded by different Cu thicknesses. In addition to the proposed base experimental configurations with Cu, additional configurations are planned with the plutonium ball nested in various thicknesses of interleaved polyethylene spherical shells mixed in with the Cu shells. The polyethylene is intended to provide fast neutron moderation and reflection, resulting in additional measurements with differing multiplication, spectra, and nuclear data sensitivity. The proposed experiments will performed at the National Criticality Experiments Research Center (NCERC). NCERC is home to a 4.5-kg α-phase stainless steel clad plutonium sphere that is referred to as the BeRP (Beryllium-Reflected Plutonium) ball due to its historical use in a beryllium-reflected critical experiment. In 2014, similar subcritical measurements were performed with the BeRP ball surrounded by nickel and tungsten. The nickel-reflected measurements were documented as a benchmark evaluation which was accepted by the International Criticality Safety Benchmark Evaluation Project (ICSBEP). Similar to past measurements, the proposed work will help both identify deficiencies and quantify uncertainties in nuclear data and validate computational methods related to neutron multiplication inference for subcritical benchmark evaluations. Monte Carlo simulations were performed for the preliminary design of a subcritical Copper-Reflected - phase Plutonium (SCRP) integral benchmark experiment. Specifically, MCNP{sup R} version 6 was used to determine the k{sub eff} and associated nuclear data sensitivities for different preliminary configurations (reflector thickness, material type). The final experimental design process will include continuous-energy nuclear data sensitivity analysis. This will help assess the potential impact of this integral measurement as it relates to international efforts to continuously improve current libraries (ENDF, JEFF, JENDL etc) that still tend to over/under-estimate the measured results of integral experiments, sometimes significantly. Deficiencies in underlying nuclear data quantities such as Nubar have been shown to have an effect on inferred values from subcritical measurements as well. The proposed experiments and subsequent computational validation will help identify such deficiencies. It will also help validate new nuclear data evaluations, including one for Cu that was recently performed in the resolved region up to 100 MeV for {sup 65}Cu and {sup 63}Cu which is expected to improve Cu-related benchmark simulation performance. The final experimental design phase will also include simulation results that will incorporate the detectors that will be used for the subcritical measurements. For the benchmark portion of the measurements, the main detectors that are being considered are portable neutron multiplicity counters made up of {sup 3}He tubes embedded in polyethylene and lined with cadmium. These detectors employ a data acquisition system that produces list-mode data (correlated information where each event is listed sequentially) that can be analyzed using the Feynman variance-to-mean method. Other detector systems including SNAP (single {sup 3}He tube embedded in polyethylene), and a high-purity germanium (HPGe) detector are being considered for supplementary measurements only and are not intended to be used for the final benchmark measurements. Decoupling the supplementary detectors from the system eliminates any contribution to the total system multiplication, and greatly simplifies the final computational benchmark model. Therefore, an optimization of the portable neutron multiplicity counter placement in the benchmark measurements will be performed to ensure that there is minimal contribution to the total system multiplication. In addition, new temperature measurement techniques and hardware will be explored. (authors)

42 ENGINEERING↗

Simulation of IST Turbomachinery Power-Neutral Tests with the ANL Plant Dynamics Code

The validation of the Plant Dynamics Code (PDC) developed at Argonne National Laboratory (ANL) for the steady-state and transient analysis of supercritical carbon dioxide (sCO2) systems has been continued with new test data from the Naval Nuclear Laboratory (operated by Bechtel Marine Propulsion Corporation) Integrated System Test (IST). Although data from three runs were provided to ANL, only two of the data sets were analyzed and described in this report. The common feature of these tests is the power-neutral operation of the turbine-compressor shaft, where no external power through the alternator was provided during the tests. Instead, the shaft speed was allowed to change dictated by the power balance between the turbine, the compressor, and the power losses in the shaft. The new test data turned out to be important for code validation for several reasons. First, the power-neutral operation of the shaft allows validation of the shaft dynamics equations in asynchronous mode, when the shaft is disconnected from the grid. Second, the shaft speed control with the compressor recirculation (CR) valve not only allows for testing the code control logic itself, but it also serves as a good test for validation of both the compressor surge control and the turbine bypass control actions, since the effect of the CR action on the loop conditions is similar for both of these controls. Third, the varying compressor-inlet temperature change test allows validation of the transient response of the precooler, a shell-and-tube heat exchanger. The first transient simulation of the compressor-inlet temperature variation Test 64661 showed a much slower calculated response of the precooler in the calculations than the test data. Further investigation revealed an error in calculating the heat exchanger tube mass for the PDC dynamic equations that resulted in a slower change in the tube wall temperature than measured. The transient calculations for both tests were done in two steps. The first step was done in the same fashion as the FY15 IST analysis, where the CR valve position and the turbine-compressor shaft speed were specified through the PDC input based on the test values. On the second step, the turbine-compressor shaft dynamics equations were invoked by specifying that the shaft is disconnected from the grid. In addition, the CR valve control was used to control the shaft speed, based on the turbine bypass control logic already implemented in the PDC. For the shaft power balance, the friction (windage) loss is calculated based on the shaft balance at the steady-state conditions and is assumed to be scaled to the third power of shaft speed in the transient. Both the steady-state and transient simulations of both tests showed good agreement with the test data. The only significant difference was the turbine performance, which was not predicted as well as it was in the previous IST simulation, resulting in the prediction of a somewhat different flow split between the two turbines. This flow split difference is believed to be the result of not addressing the recent turbine modifications in the model. In addition, the full simulation of the turbine-compressor speed variation Test 65261-P with shaft speed control showed greater a difference with the test data later in the transient than the other test. Further analysis of the results revealed that this difference is most likely due to scaling the shaft windage losses only with the shaft speed and ignoring its dependency on the fluid density in the shaft cavity. Based on the results of steady state and transient calculations of the Tests 64661 and 65216-P, several areas of future improvements for the PDC simulation of the IST are identified.

42 ENGINEERING↗

Modeling Interfaces to Support Low-Level Waste Disposal System Performance Assessments - 20366

In low-level waste (LLW) disposal sites, interfaces between cementitious materials, used as waste forms and/or engineered barriers, and the surrounding soil or backfill material are often encountered. Reactions across these interfaces may lead to chemical and structural alteration of the cementitious and backfill materials that may ultimately affect long-term performance. For example, the ingress of carbon dioxide from soil gas into a waste tank concrete shell at the Hanford Site or Savannah River Site (SRS) or a low-level waste disposal vault at SRS leads to carbonation of cement hydration products (e.g. portlandite, calcium-silicate hydrate or C-S-H, and ettringite). The result of carbonation is a decrease in pH in the cement paste portion of the tank wall or vault concrete structure that could ultimately lead to de-passivation of the embedded structural steel and, eventually, to cracking. Cracking can lead to increased ingress of water into the structure, corresponding increased release of constituents of concern, and to subsequent increased transport of these constituents to the surrounding environment. The mobility of trace constituents (e.g., radionuclides of concern) in waste forms may increase in response to changes in pH, pore structure, and mineralogical gradients. Depletion of portlandite results in subsequent decalcification of C-S-H that leads to changes in the cement strength and may lead to structural failure. At the boundary between waste forms and concrete vaults, the migration of sulfate ions from the salt waste form (e.g., the saltstone waste form used for LLW disposal at the Savannah River Site in Saltstone Disposal Units, or SDUs) into the barrier or vault concrete has been predicted to result in expansive mineral phase formation (or 'sulfate attack'). Expansive mineral formation could result in cracking and potential loss of structural integrity in the vault concrete. In the performance assessment (PA) for the SRS SDUs, prediction of both the carbonation and sulfate attack fronts are critical to assessing the long-term performance of these LLW disposal vaults. A general purpose geochemical reactive transport model has been developed in LeachXS/ORCHESTRA to evaluate typical interfaces for LLW disposal environments, including SDUs at SRS. The model may be used to predict the long-term performance of interfaces between cementitious materials and saltstone or backfill materials with respect to primary phases by considering mass transport, cement chemistry, geochemical speciation, and multi-ionic diffusion over interfaces between different materials. The present study compares the performance and interactions between vault concrete and saltstone waste form for a representative SDU scenario. The materials were characterized using pH-dependence leaching test (EPA 1313) and semi-dynamic transport tests (EPA 1315) with test results used to parameterize the interface model. The development of a credible inter model provides an important basis for supporting future PAs where carbonation and sulfate attack are important aging and degradation mechanisms. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Final Report on Development of Microwave Resonant Cavity Transducer for Fluid Flow Sensing: Development of Microwave Cavity Flow Meter for Advanced Reactor High Temperature Fluids

We are investigating a microwave resonant cavity transducer for flow sensing in the vessel of a high temperature fluid advanced reactor (AR), such as a molten salt cooled reactor (MSCR) or a sodium fast reactor (SFR). This transducer is a hollow metallic cylindrical cavity, with one of the flat walls of the cylinder flexible enough to undergo microscopic deflection due to dynamic fluid pressure. Membrane deflection leads to a shift in the microwave resonant frequency, which can be detected with a spectrum analyzer. We have developed a continuum electromechanics model of the microwave resonant cavity transducer performance. The deflection of the membrane is calculated using equations from the theory of plates and shells for deflection of radially constrained thin circular disk under uniform load. The microwave frequency shift is calculated using the equations from the microwave cavity perturbation theory. The transducer model was validated with proof-of-concept experimental data of water flow sensing with a Brass 360 right circular cylinder with 22.2mm diameter and 203µm thick wall. The cavity was excited through a subwavelength hole in TE 011 mode with resonant frequency f ≈ 17.8GHz. Subsequently, we have performed a preliminary proof-of-principle test of flow sensing in high temperature liquid sodium in environment. For this test, we have developed a cylindrical resonator with the same dimensions as for the Brass 360 cavity. The resonator for high temperature liquid sodium test was machined from stainless steel 316 and electroplated with silver on the interior surfaces. We have also developed and insertion probe consisting of a 50cm WR-42 brass waveguide enclosed in a protective SS316 tube. The cavity was excited through a subwavelength hole on the side of the wall of the cylinder in the TE 011 mode with resonant frequency f ≈ 17.8GHz. The liquid sodium setup consists of a cylindrical vessel with a center feed line, where a transducer inserted through the top cap of the vessel measures velocity of the impinging liquid jet. The sodium flow sensing study was performed in a liquid sodium vessel at 340°C temperature and ambient pressure. The flow rate was changed by varying sodium pump power, and a frequency shift of several hundred kHz was observed. The transducer was removed after 70 days of testing. No visual damage was observed, and the electromagnetic response remained the same. As a calibration experiment, we have assembled a water vessel with a center feed, and with dimensions similar to those of the liquid sodium setup. Water flow sensing was performed before and after liquid sodium test. The responses in both cases are similar and agree with COMSOL computer simulations. Because long-term (multi-year) experimental tests of transducer resilience to harsh environment are not practical, we have developed a probabilistic model of creep to estimate transducer resilience to the harsh environment. The probabilistic model considers diffusion creep under the condition of high temperature and low stress, where the stress and temperature are allowed to be random variables with Gaussian distributions. Using the probabilistic model, we estimate inelastic membrane deflections due to creep for several temperature ranges. We conclude that for temperatures less than 650°C, creep has negligible long-term effect on the transducer performance.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Level structure of light neutron-rich La isotopes beyond the 𝑁 = 82 shell closure

Here, the high spin excited states of Lanthanum isotopes 140–143 La, above the 𝑁 = 82 closed shell, were populated in fission reactions. The prompt 𝛾-ray transitions were measured using two complementary methods: (a) in coincidence with the isotopically identified fragments produced in the fission of the 238 U + 9 Be system using the Variable Mode Spectrometer (VAMOS++) and the Advanced Gamma Tracking Array (AGATA) spectrometer, and (b) high statistics threefold 𝛾−𝛾−𝛾 and fourfold 𝛾−𝛾−𝛾−𝛾 coincidence data from the spontaneous fission of 252 Cf using the Gammasphere. This work reports the first identification of a pair of parity doublet structures in 143 La and the new high spin level structure in 140–142 La from prompt 𝛾-ray spectroscopy. The level structures are interpreted in terms of the systematics of neighboring odd-𝑍 nuclei above the 𝑍 = 50 shell closure and large-scale shell model calculations. The present results indicate the presence of stable octupole deformation in 143 La. The excitation energy pattern and their comparison with neighboring isotones, moving away from the 𝑁 = 82 closed shell, point towards a transition from single-particle structures to an alternating parity rotational band structure in the La isotopic chain.

Navin, A. [Centre National de la Recherche Scienti↗

Search for triple Higgs boson production in the 6⁢𝑏 final state using 𝑝⁢𝑝 collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A search for the production of three Higgs bosons (𝐻⁡𝐻⁡𝐻) in the $b\bar{b}b\bar{b}b\bar{b}$ final state is presented. The search uses 126 fb −1 of proton-proton collision data at $\sqrt{s}$ =13 TeV collected with the ATLAS detector at the Large Hadron Collider. The analysis targets both nonresonant and resonant production of 𝐻⁡𝐻⁡𝐻. The resonant interpretations primarily consider a cascade decay topology of 𝑋 →𝑆⁢𝐻 → 𝐻⁡𝐻⁡𝐻 with masses of the new scalars 𝑋 and 𝑆 up to 1.5 and 1 TeV, respectively. In addition to scenarios where 𝑆 is off-shell, the nonresonant interpretation includes a search for Standard Model 𝐻⁡𝐻⁡𝐻 production, with limits on the trilinear and quartic Higgs self-coupling set. No evidence for 𝐻⁡𝐻⁡𝐻 production is observed. An upper limit of 59 fb is set, at the 95% confidence level, on the cross section for Standard Model 𝐻⁡𝐻⁡𝐻 production.

Artificial neural networks↗

Development of a Preliminary Performance Assessment to Support Single-Shell Tank Waste Retrieval - 19446

A preliminary Performance Assessment (PA) of Single-Shell Tank (SST) Waste Management Area A-AX (WMA A-AX) located at DoE's Hanford Site in southeastern Washington is being conducted to satisfy the requirements of the Hanford Federal Facility Agreement and Consent Order (HFFACO), as well as other Federal and State requirements of closure plans and permits. The WMA A-AX PA effort is assessing the fate, transport, and impacts of radionuclides and hazardous chemicals within residual wastes left in tanks, ancillary equipment, and facilities in their assumed closed configuration, and the subsequent risks to humans into the far future. WMA A-AX includes the 241-A Tank Farm (A Farm), the 241-AX Tank Farm (AX Farm), and the ancillary equipment associated with each Farm. There are six underground SSTs in A Farm, and four underground SSTs in AX Farm. Each of these SSTs have a storage capacity of 1,000,000 gallons. A complex waste transfer system of ancillary equipment supported the transfer and storage of waste within WMA A-AX SSTs. This ancillary equipment includes transfer lines, catch tanks, diversion boxes, vaults, valve pits, and other miscellaneous structures. This paper emphasizes the development of the PA effort focused on radiological impacts to meet the requirements for a closure authorization under DOE Order 435.1. Lessons learned from retrieval and development of a recently completed PA of the nearby Waste Management Area C (WMA C) led to the decision to develop a preliminary PA for WMA A-AX prior to initiation of retrieval efforts so that a site-specific risk management capability could be available to support anticipated retrieval decisions. The technical approach for the PA analysis includes developing both a process-level model using site-specific hydrogeological data, as well as a system-level model. The system model is being developed to facilitate uncertainty and sensitivity analyses being conducted in the PA effort. Preliminary results of the DOE Order 435.1 PA are evaluating potential impacts to the groundwater and air pathways to determine radiation exposure once radionuclides are released to the environment from residual waste after closure of the tank farm. To meet other analysis requirements in DOE Order 435.1, the PA effort must also evaluate potential radiological impacts from inadvertent intruder scenarios into the closed WMA A-AX facility. The results of the PA evaluation will be compared to performance objectives and measures in the DOE Order 435.1 to support retrieval and eventual closure decisions at WMA A-AX. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Influences of shock imprinting on mix in a 3D-printed porous media

Mixing of materials in porous media can cause a significant impact on fusion yield as previously demonstrated by the National Ignition Facility (NIF) MARBLE Campaign. Initially, the reactants are separated, with deuterium in the lattice struts and a tritium gas fill in the voids. Lattice parameters such as the strut thickness and relative pitch, provide a control for the mix parameters in the experiment. Los Alamos National Laboratory’s (LANL) BOSQUE project looks to better understand how the mix of the reactants and shell materials impact the fusion burn and resultant yield on various laser platforms. xRAGE’s Eulerian hydrodynamics and adaptive mesh refinement (AMR) provide the unique ability to study the impacts of multiscale features of complex lattice structures. This modeling provides the ability to measure shock front variations as the wave progress’ through a given media. Initial conditions of the lattice are essential to accurately model mix and burn measured by experiment. By varying the initial orientation and densities of these lattice regions the early time dynamics of how the shock is launched into the system is changed and advocates for the study of resulting effects. In this work, we will study the sensitivities of shock effects in varying 3D printed geometric systems and how these shocks alter the structure and mix in the lattice. We will discuss both preliminary experimental results and simulations to help plan and constrain future experiments where we will study the impact of different lattice geometries and lattice bulk densities. This work concludes with the relative impacts of lattice geometries on shock speeds at different bulk densities and the resultant mix widths due to those shock interactions. We see agreement with theory at the higher end of our bulk density study, however, as we approach lower bulk density systems the dynamics of these interactions begin to change.

2 Photon Polymerization↗

High Fidelity CFD Simulations Supporting the KP-FHR

Kairos Power, LLC, is developing its version of the Fluoride-cooled High-temperature Reactor, the KP-FHR. The design uses a pebble bed core with fluoride salt as a coolant. The pebbles used in the KP-FHR have a diameter of 4 cm, with a shell fuel region where TRISO particles are embedded. A Pebble bed core design is adopted by several Gen IV reactors, They boast many benefits, such as fuel integrity, highly efficient heat transfer, and passive safety. However, it is challenging to accurately predict temperature and flow inside a pebble bed. Traditional approaches use the porous media model, which regards the pebble bed as a continuous medium, but with different temperature fields representing different levels, such as the fluid temperature, pebble surface temperature, and pebble center temperature. Empirical heat transfer correlations are adopted to calculate the heat transfer coefficient between different phases. However, empirical correlations are usually validated with experimental data, which usually lacks detail inside the pebble bed. The available experimental data is also generally at a high Reynolds number, which falls outside of the conditions of KP-FHR. Explicit computational fluid dynamics (CFD) simulations of randomly packed pebble beds have only become feasible recently. This is thanks to the rapid development of computational power and scalable algorithms. In this work, we used the Spectral Element Method (SEM) CFD code NekRS to simulate the randomly packed pebble bed in a cylindrical container. NekRS, which is the GPU variant of Nek5000, but refactored to utilize the computational power of GPUs using the OCCA library to run on hybrid architecture high performance computing systems. It was initially developed with the libParamunal library, but truncated and tuned for large-scale turbulence simulation. As a result, the SEM reaches higher precision with the same degrees of freedom by using a high-order Lagrange polynomial basis distributed on Gauss-Lobatto-Legendre quadrature inside each element, compared to lower-order methods, such the Finite Volume Method and Finite Element Method. The report is divided into five parts. We start with a general discussion of the pebble bed reactor, along with a specific investigation into the KP-FHR. The second part presents the numerical methodology. In the third part, we study a modular pebble bed with 1741 pebbles in a container of 7 pebble-diameter radius. Beyond LES simulations done by NekRS, we also leveraged the thermal radiation model in OpenFOAM to study heat transfer under no-forced-flow scenarios. Then, in the fourth part we simulated a pebble bed similar to the size of the Hermes Test Reactor. The total number of pebbles is in these simulations is 34,374. The container radius is 14 pebble-diameters. Finally, the report concludes in part five, with a discussion of future work.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗