Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

A Two-Stage Physical-Based Model for Predicting Flow Stress of As-cast TiAl Alloy Under Hot Deformation Conditions

The hot deformation behavior of Ti-30Al-4.2Mn-4.5Nb-0.2B alloy was investigated using the isothermal compression experiment at temperatures of 1020-1200 °C and strain rates of 0.001-1 s{sup −1}. The flow stress was sensitive to the deformation parameters like temperature and strain rate, which decreases with the increase in temperature and decrease in strain rates. Based on the true stress-true strain data, a two-stage physical-based model was proposed to describe the flow stress curve of as-cast TiAl alloy during hot deformation process. For establishing the model, at first, the flow curves of dynamic recovery (DRV) were modeled by employing stress-dislocation relation and adjusting dislocation annihilation coefficient Ω. Then, the flow curves of dynamic recrystallization (DRX) were modeled by considering the dynamic softening behavior into Avrami equation. Finally, the flow curves in the entire deformation stages could be described by embedding the predicted data of DRV model (i.e., flow stress before the critical strain) into the predicted data by DRX model (i.e., flow stress after the critical strain). The critical strain for initiation of DRX was determined by the double-differentiation method. To evaluate the applicability and effectiveness of DRX kinetics equation, the DRX curves were calculated and were consistent with the microstructure observation. Comparison between the experimental and predicted data shows that the proposed physical-based model can well forecast the flow stress under a wide working domain.

36 MATERIALS SCIENCE↗

Atomic intercalation to measure adhesion of graphene on graphite

The interest in mechanical properties of layered and 2D materials has reemerged in light of device concepts that take advantage of flexing, adhesion and friction in such systems. Here we provide an effective measurement of the nanoscale elastic adhesion of a graphene sheet atop highly ordered pyrolytic graphite (HOPG) based on the analysis of atomic intercalates in graphite. Atomic intercalation is carried out using conventional ion sputtering, creating blisters in the top-most layer of the HOPG surface. Scanning tunneling microscopy coupled with image analysis and density functional theory are used to reconstruct the atomic positions and the strain map within the deformed graphene sheet, as well as to demonstrate subsurface diffusion of the ions creating such blisters. To estimate the adhesion energy we invoke an analytical model originally devised for macroscopic deformations of graphene. This model yields a value of 0.221 ± 0.011 J/m -2 for the adhesion energy of graphite, which is in surprisingly good agreement with reported experimental and theoretical values. This implies that macroscopic mechanical properties of graphene scale down to at least a few nanometers length. The simplicity of our method, compared to the macroscale characterization, enables analysis of elastic mechanical properties in two-dimensional layered materials and provides a unique opportunity to investigate the local variability of mechanical properties on the nanoscale.

36 MATERIALS SCIENCE↗

Predicting Deformation of Parts from HP Printers due to Sintering with Modeling and Simulation (CRADA NFE-18-07363)

This work proposes to leverage Oak Ridge National Laboratory’s (ORNL) sintering simulation software developed at the Manufacturing Demonstration Facility to 1) investigate the deformation of sintered parts and 2) to develop fast surrogate-based optimization methods for HP Inc. This includes the development of ORNL’s software on HP systems, integration and testing with HP part geometries and material properties, the development of surrogate models based on the results of the simulation, and modifications to the software based on feedback from HP. The expected impacts of this work are a drastic reduction in print costs, an increase in printer throughput, and the identification of novel, possibly exotic materials for 3D printing. This work will also decrease the time to market for HP’s print technology by decreasing the amount of resources and type dedicated to physical testing.

42 ENGINEERING↗

SU-E-T-428: Feasibility Study of 4D Image Reconstruction by Organ Motion Vector Extension Based On Portal Images

Purpose: To develop and to test a method to generate a new 4D CT images of the treatment day from the old 4D CT and the portal images of the day when the motion extent exceeded from that represented by plan CTs. Methods: A motion vector of a moving tumor in a patient may be extended to reconstruct the tumor position when the motion extent exceeded from that represented by plan CTs. To test this, 1. a phantom that consists of a polystyrene cylinder (tumor) embedded in cork (lung) was placed on a moving platform with 4 sec/cycle and amplitudes of 1 cm and 2 cm, and was 4D-scanned. 2. A 6MV photon beam was irradiated on the moving phantoms and cineEPID images were obtained. 3. A motion vector of the tumor was acquired from 4D CT images of the phantom with 1 cm amplitude. 4. From cine EPID images of the phantom with the 2 cm amplitude, various motion extents (0.3 cm, 0.5 cm, etc) were acquired and programmed into the motion vector, producing CT images at each position. 5. The reconstructed CT images were then compared with pre-acquired “reference” 4D CT images at each position (i.e. phase). Results: The CT image was reconstructed and compared with the reference image, showing a slight mismatch in the transition direction limited by voxel size (slice thickness) in CT image. Due to the rigid nature of the phantom studied, the modeling the displacement of the center of object was sufficient. When deformable tumors are to be modeled, more complex scheme is necessary, which utilize cine EPID and 4D CT images. Conclusion: The new idea of CT image reconstruction was demonstrated. Deformable tumor movements need to be considered in the future.

60 APPLIED LIFE SCIENCES↗

A neural network‐enhanced reproducing kernel particle method for modeling strain localization

Abstract Modeling the localized intensive deformation in a damaged solid requires highly refined discretization for accurate prediction, which significantly increases the computational cost. Although adaptive model refinement can be employed for enhanced effectiveness, it is cumbersome for the traditional mesh‐based methods to perform while modeling the evolving localizations. In this work, neural network‐enhanced reproducing kernel particle method (NN‐RKPM) is proposed, where the location, orientation, and shape of the solution transition near a localization is automatically captured by the NN approximation via a block‐level neural network (NN) optimization. The weights and biases in the blocked parameterization network control the location and orientation of the localization. The designed basic four‐kernel NN block is capable of capturing a triple junction or a quadruple junction topological pattern, while more complicated localization topological patters are captured by the superposition of multiple four‐kernel NN blocks. The standard RK approximation is then utilized to approximate the smooth part of the solution, which permits a much coarser discretization than the high‐resolution discretization needed to capture sharp solution transitions with the conventional methods. A regularization of the NN approximation is additionally introduced for discretization‐independent material responses. The effectiveness of the proposed NN‐RKPM is verified by a series of numerical verifications.

Baek, Jonghyuk↗

The transient behavior of weldpools with a deformed free surface

Transient heat transfer, fluid flow and phase change in a weldpool with a deformed free surface are modeled using a two-dimensional coordinate transfornmation. The theoretical approach makes it possible to accurately model high Marangoni number flows even when the free surface is not horizontal. The method is used to examine the role of surface deformation and surface tension forces in controlling weld penetration during cathode spot welding of steel and aluminum. The calculated flow fields, temperature distributions and weldpool shapes are consistent with experimental findings, and are in reasonable agreement with previously published modeling efforts.

Thompson, M. E.↗

Gravity-driven deformation of the crust on Venus

Intense horizontal deformation features are observed on the surface of Venus despite the apparent absence of terrestrial-style plate tectonics. High surface temperature, low erosion rate, and regions of elevated terrain suggest that gravity spreading may be responsible for some of these features. Gravity spreading on the Earth is known to cause extensive deformation in certain thin-skinned tectonic regions, where the uppermost layers become detached along a decollement. While the high pore pressures and soft sedimentary rocks frequently observed along decollements on the Earth are not plausible for Venus, temperature induced regions of ductile deformation may exist. Simple viscous models of gravity spreading above a ductile region of the crust are developed to examine the effects of rheology, thermal gradient, surface slope and crustal thickness on deformation. For a reasonable range of parameters, the models show that surface-slope-driven ductile deformation at relatively shallow depths in the crust is possible and may be capable of detaching the uppermost rigid portion of the crust, resulting in horizontal translation.

Smrekar, Suzanne↗

Solving puzzles in deformed JT gravity: phase transitions and non-perturbative effects

Recent work has shown that certain deformations of the scalar potential in Jackiw-Teitelboim gravity can be written as double-scaled matrix models. However, some of the deformations exhibit an apparent breakdown of unitarity in the form of a negative spectral density at disc order. We show here that the source of the problem is the presence of a multi-valued solution of the leading order matrix model string equation. While for a class of deformations we fix the problem by identifying a first order phase transition, for others we show that the theory is both perturbatively and non-perturbatively inconsistent. Aspects of the phase structure of the deformations are mapped out, using methods known to supply a non-perturbative definition of undeformed JT gravity. Some features are in qualitative agreement with a semi-classical analysis of the phase structure of two-dimensional black holes in these deformed theories.

2D gravity↗

Concurrent multiscale modeling of microstructural effects on localization behavior in finite deformation solid mechanics

The heterogeneity in mechanical fields introduced by microstructure plays a critical role in the localization of deformation. In order to resolve this incipient stage of failure, it is therefore necessary to incorporate microstructure with sufficient resolution. On the other hand, computational limitations make it infeasible to represent the microstructure in the entire domain at the component scale. Here, the authors demonstrate the use of concurrent multiscale modeling to incorporate explicit, finely resolved microstructure in a critical region while resolving the smoother mechanical fields outside this region with a coarser discretization to limit computational cost. The microstructural physics is modeled with a high-fidelity model that incorporates anisotropic crystal elasticity and rate-dependent crystal plasticity to simulate the behavior of a stainless steel alloy. The component-scale material behavior is treated with a lower fidelity model incorporating isotropic linear elasticity and rate-independent J 2 plasticity. The microstructural and component scale subdomains are modeled concurrently, with coupling via the Schwarz alternating method, which solves boundary-value problems in each subdomain separately and transfers solution information between subdomains via Dirichlet boundary conditions. In this study, the framework is applied to model incipient localization in tensile specimens during necking.

36 MATERIALS SCIENCE↗

Calibration of elastoplastic constitutive model parameters from full-field data with automatic differentiation-based sensitivities

Here, we present a framework for calibration of parameters in elastoplastic constitutive models that is based on the use of automatic differentiation (AD). The model calibration problem is posed as a partial differential equation-constrained optimization problem where a finite element (FE) model of the coupled equilibrium equation and constitutive model evolution equations serves as the constraint. The objective function quantifies the mismatch between the displacement predicted by the FE model and full-field digital image correlation data, and the optimization problem is solved using gradient-based optimization algorithms. Forward and adjoint sensitivities are used to compute the gradient at considerably less cost than its calculation from finite difference approximations. Through the use of AD, we need only to write the constraints in terms of AD objects, where all of the derivatives required for the forward and inverse problems are obtained by appropriately seeding and evaluating these quantities. We present three numerical examples that verify the correctness of the gradient, demonstrate the AD approach's parallel computation capabilities via application to a large-scale FE model, and highlight the formulation's ease of extensibility to other classes of constitutive models.

42 ENGINEERING↗

A nonlinear elasto-plastic bond model for the discrete element modeling of woody biomass particles

This work presents an experiment-informed, semi-empirical, elasto-plastic bond model for the discrete element modeling of woody biomass particles. The model renders nonlinear plastic deformation of materials when subjected to compression/tension, bending, and twisting, essential for accurately simulating the behavior of biomass in comminution. The model is implemented in an open-source DEM package LIGGGHTS and is assessed in a number of verification tests. The model is applied to simulate the fracturing test of notched loblolly pine blocks. Reduced bond strength is prescribed to the weak planes along the growth rings. It is found that the square-root formulation for describing the elasto-plastic normal bond contact delivers the best agreement with the experimental data over its linear and quadratic counterparts. Furthermore, the model predicts a strong anisotropic behavior of wood blocks with regard to the grain orientations, indicating that the cutting angle should be an important attribute for the optimization of biomass comminution.

42 ENGINEERING↗

Understanding the mechanisms of amorphous creep through molecular simulation

Significance The individual and collective molecular displacements in an amorphous solid undergoing plastic deformation are simulated by an atomistic method that allows incremental motions to be observed over a time window of fractions of seconds. Because the timescale matches well with the conditions of experimental measurements, simulation details provide dynamical evidence for the fundamental mechanisms of amorphous creep. In particular, knowledge of the interplay between diffusion (flow) and mechanical deformation processes enables us to explain the stress and temperature behavior of the experimental data as well as the validity of model descriptions of molecular mechanisms in terms of spatially and temporally heterogeneous fluctuations.

42 ENGINEERING↗

Global Assessment of Volcanic Debris Hazards from Space

Hazard (slope stability) assessment for different sectors of volcano edifices was successfully obtained from volcanoes in North and South America. The assessment entailed Hyperion images to locate portions of the volcano that were hydrothermally altered to clay rich rocks with zones that were also rich in alunite and other minerals. The identified altered rock zones were field checked and sampled. The rock strength of these zones was calculated from the field and laboratory measurements. Volcano modeling utilizing the distinct element method and limit equilibrium technique, with the calculated strength data was used to assess stability and deformation of the edifice. Modeling results give indications of possible failure volumes, velocities and direction. The models show the crucial role hydrothermally weak rock plays in reducing the strength o the volcano edifice and the rapid identification of weak rock through remote sensing techniques. Volcanoes were assessed in the Cascade Range (USA), Mexico, and Chile (ongoing).

Watters, Robert J.↗

Study of Advanced Occupant Models to Quantify Injury Risk for eVTOL Vehicles

Urban transportation is currently evolving from traditional ground-based vehicles (cars, taxis, and buses) to include air-based electric vertical take-off and landing (eVTOL) vehicles which can be utilized for on-demand transportation, cargo transport, and emergency services. These new eVTOL vehicles are designed to be small, lightweight, and able to operate autonomously without user intervention. Safety is a big part of eventual eVTOL adoption, however gaps in the consideration of safety features exist. Anthropomorphic test devices (ATDs) are used in aerospace crashworthiness standards to quantify occupant injury risk and develop improved safety designs for emergency landing situations, but the ATDs currently used in aircraft certification requirements were developed many decades ago. Developments have occurred over the years involving ATD technology, which includes a host of newer and more biofidelic ATDs such as the Test Device for Human Occupant Restraint (THOR). Increased computing power has also allowed for detailed computational human body models (HBMs) to be created, such as the Global Human Body Model Consortium (GHBMC). This study aims to assess the capability of both HBMs and new ATD designs to identify injury mechanisms within eVTOL relevant emergency landing conditions. Finite element (FE) analysis was used to expand upon full-scale and seat level impact testing conducted by researchers at the National Aeronautics and Space Administration (NASA) to look at effects of occupant model configurations on prediction of injury. The GHBMC HBM and THOR ATD models were simulated in the seat level test conditions to characterize differences between these advanced assessment tools and traditional ATDs in the isolated seat loading environment. Results identified key differences in the responses from each of the models utilized and compared their impact response in head, neck, and spinal injury metrics. The THOR model identified potential risks for head injuries due to head impacts on the seat, however it predicted lower spinal loads than the other occupant surrogates. The GHBMC showed distinctly different biomechanical responses compared to the ATD. The GHBMC model is much more deformable than the ATDs and it exhibited higher distribution of forces and increased sensitivity to the duration of acceleration pulses. Both models incorporated into this study identified key mechanisms for injury that should be considered for passenger safety in the development of these novel aircraft. In addition, this study demonstrated the value of FE modeling for running a variety of complex human surrogates to identify potential injury mechanisms for consideration in regulation and development of new aircraft. Continued research in this field to improve validation these models will only lead to safer aircraft and more comprehensive safety measures.

Crashworthiness↗

Study of Advanced Occupant Models to Quantify Injury Risk for eVTOL Vehicles

Urban transportation is currently evolving from traditional ground-based vehicles (cars, taxis, and buses) to include air-based electric vertical take-off and landing (eVTOL) vehicles which can be utilized for on-demand transportation, cargo transport, and emergency services. These new eVTOL vehicles are designed to be small, lightweight, and able to operate autonomously without user intervention. Safety is a big part of eventual eVTOL adoption, however gaps in the consideration of safety features exist. Anthropomorphic test devices (ATDs) are used in aerospace crashworthiness standards to quantify occupant injury risk and develop improved safety designs for emergency landing situations, but the ATDs currently used in aircraft certification requirements were developed many decades ago. Developments have occurred over the years involving ATD technology, which includes a host of newer and more biofidelic ATDs such as the Test Device for Human Occupant Restraint (THOR). Increased computing power has also allowed for detailed computational human body models (HBMs) to be created, such as the Global Human Body Model Consortium (GHBMC). This study aims to assess the capability of both HBMs and new ATD designs to identify injury mechanisms within eVTOL relevant emergency landing conditions. Finite element (FE) analysis was used to expand upon full-scale and seat level impact testing conducted by researchers at the National Aeronautics and Space Administration (NASA) to look at effects of occupant model configurations on prediction of injury. The GHBMC HBM and THOR ATD models were simulated in the seat level test conditions to characterize differences between these advanced assessment tools and traditional ATDs in the isolated seat loading environment. Results identified key differences in the responses from each of the models utilized and compared their impact response in head, neck, and spinal injury metrics. The THOR model identified potential risks for head injuries due to head impacts on the seat, however it predicted lower spinal loads than the other occupant surrogates. The GHBMC showed distinctly different biomechanical responses compared to the ATD. The GHBMC model is much more deformable than the ATDs and it exhibited higher distribution of forces and increased sensitivity to the duration of acceleration pulses. Both models incorporated into this study identified key mechanisms for injury that should be considered for passenger safety in the development of these novel aircraft. In addition, this study demonstrated the value of FE modeling for running a variety of complex human surrogates to identify potential injury mechanisms for consideration in regulation and development of new aircraft. Continued research in this field to improve validation these models will only lead to safer aircraft and more comprehensive safety measures.

Crashworthiness↗

Simulations of Stress-induced Twinning and De-twinning: a Phase-field Model

Twinning in metals is a major plastic deformation mode. Here we present a phase-field model to describe twin formation and evolution in a polycrystalline FCC metal under loading and unloading. The model assumes that the twin nucleation, growth and de-twinning is a process of partial dislocation nucleation and slip on successive habit planes. Stacking fault energies, energy pathways ( surfaces), critical shear stresses for the formation of stacking faults, and dislocation core energies are used to construct the thermodynamic model. The simulation results demonstrate that the model is able to predict the nucleation of twins and partial dislocations as well as the morphology of the twin nuclei, and reasonably to describe twin growth and interaction. The twin microstructures at grain boundaries are in agreement with experimental observation . It is found that de-twinning occurs during unloading in performed simulations. However, strong dependence of twin structure evolution on loading history is observed.

36 MATERIALS SCIENCE↗

A Fusion of Geothermal and InSAR Data with Machine Learning for Enhanced Deformation Forecasting at the Geysers

The Geysers geothermal field in California is experiencing land subsidence due to the seismic and geothermal activities taking place. This poses a risk not only to the underlying infrastructure but also to the groundwater level which would reduce the water availability for the local community. Because of this, it is crucial to monitor and assess the surface deformation occurring and adjust geothermal operations accordingly. In this study, we examine the correlation between the geothermal injection and production rates as well as the seismic activity in the area, and we show the high correlation between the injection rate and the number of earthquakes. This motivates the use of this data in a machine learning model that would predict future deformation maps. First, we build a model that uses interferometric synthetic aperture radar (InSAR) images that have been processed and turned into a deformation time series using LiCSBAS, an open-source InSAR time series package, and evaluate the performance against a linear baseline model. The model includes both convolutional neural network (CNN) layers as well as long short-term memory (LSTM) layers and is able to improve upon the baseline model based on a mean squared error metric. Then, after getting preprocessed, we incorporate the geothermal data by adding them as additional inputs to the model. This new model was able to outperform both the baseline and the previous version of the model that uses only InSAR data, motivating the use of machine learning models as well as geothermal data in assessing and predicting future deformation at The Geysers as part of hazard mitigation models which would then be used as fundamental tools for informed decision making when it comes to adjusting geothermal operations.

Yazbeck, Joe (ORCID:0000000302235260)↗

Thermomechanical Modeling of Copper

The plastic deformation of metals is a dissipative process. Some fraction of the plastic work is converted to heat which, given the temperature dependent response of metals, produces a thermal-mechanical coupling. In various cases, for instance when the loading is dynamic, this interaction can impact the resulting response of a material and/or system. Thus, appropriately capturing the heat generation from plastic work is necessary for various solid mechanics analysis. Determination of the fraction of work converted to heat has been long studied. Recent developments have demonstrated that the fraction is not constant but depends on various state variables. Resolving these features requires combined modeling and experimental studies. To this end, 304L stainless steel – a poor thermal conductor – was recently subjected to such an investigation. Advanced modeling capabilities were deployed to assess novel thermomechanically coupled experiments. As a complement to that study, in the current work a similar investigation is performed on copper – a good thermal conductor – to assess performance on the opposite end of the spectrum. The current document discusses these modeling efforts.

36 MATERIALS SCIENCE↗