Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mixed conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Mixed Tin-Titanium Oxides by Atomic Layer Deposition on Planar Substrates: Physical and Electronic Structure

Ternary atomic layer deposition of Sn-doped TiO x (Sn:TiO x ) and Ti-doped SnO x (Ti:SnO x ) was performed using tetrakisdimethylamidotitanium (IV) and tin(IV) with water at 150 °C on (1 0 0) Si and quartz substrates. The physical structure of the films was investigated using scanning electron, atomic force, and Kelvin probe force microscopies as well as spectroscopic ellipsometry, Raman spectroscopy, and X-ray diffraction. All as-deposited films are amorphous and possessed flat and conformal topographies with low surface roughness (<1 nm). Annealed Sn:TiO x and Ti:SnO x crystallize into the tetragonal anatase TiO 2 and cassiterite SnO 2 structures, respectively, without large variations to the film topography. The chemical composition of the as-deposited and annealed films was investigated through X-ray photoelectron spectroscopy. While dopants are homogenously mixed, the ternary ALD to form Sn:TiO x and Ti:SnO x surprisingly does not follow the rule of mixtures, despite similarities in both the growth rates of binary SnO x and TiO x and the precursors used. This finding is also supported by spectroscopic ellipsometry. Here, we postulate the deviation from the rule of mixtures is due to non-ideal surface chemistry of the binary ALD of SnO x . The optical bandgap of all films was quantified by the Tauc analysis and the valence band position was investigated by valence band X-ray photoelectron spectroscopy. Intra-bandgap states above the valence band maximum were observed for as-deposited Ti:SnO x and Sn:TiO x and ascribed to 5 s states from Sn 2+ ions. The presence of these intra-bandgap states induces enhanced visible absorption and bathochromic shifts to the apparent bandgap for all as-deposited films. Annealing the films removes the intra-bandgap states and increases the optical bandgap. Simplified band diagrams created using the data available demonstrated that the conduction and valence band positions did not vary between the positions of pure TiO 2 or SnO 2 with monotonic increases to the dopant incorporation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

RidgeAlloy: A high pressure die casting alloy that captures the approaching wave of automotive body sheet scrap

Oak Ridge National Laboratory (ORNL) has recently launched an effort to economically expand the North American aluminum supply chain by designing and developing a new family of Al-Mg-Si-Fe-Mn structural die cast aluminum alloys that can be made from up to 100% mixed 5xxx and 6xxx series automotive post-consumer sheet scrap and do not require heat treatment. The goal is to develop an alloy capable of capturing the approaching scrap wave of aluminum sheet intensive vehicles (in the 2030’s) into integrated structural high pressure die castings, rather than down-cycling these high-grade sheet alloys into non-structural castings. ORNL discovered a significant gap in the commercial thermodynamic databases that were unable to predict the trends of a key primary intermetallic phase as a function of composition. Experiments were performed to correct this gap and to create a unique, corrected quaternary database for Al-Mg-Si-Fe. High throughput computational methods, including solidification simulations, were used to identify a composition volume capable of avoiding this embrittling primary intermetallic phase, even at higher Fe + Si contents. Laboratory scale castings validated the thermodynamic and solidification predictions and resulted in lab-cast alloys with little primary intermetallic, and which met or exceeded structural casting properties requirements for yield strength and ductility. An accelerated demonstration of an HPDC automotive part was conducted in collaboration with two U.S. small businesses. Ingots made from 100% recycled 5xxx and 6xxx series scrap (plus Fe) were used to die cast one variant of this new family of Al-Mg-Si-Fe-Mn alloys (with high Si + Fe content) into a mid-sized HPDC structural-type automotive component. The HPDC alloy demonstration part showed good properties (especially ductility) and good castability for a complex component.

Plotkowski, Alex [ORNL] (ORCID:0000000154718681)↗
DOE OSTI2023

Mechanism and kinetic study of rare earth extraction from allanite by direct acid leaching

Direct acid leaching was conducted to recover rare earth elements (REEs) from an allanite ore assaying 9,861.4 ppm of REEs. The effects of operational variables such as acid type, sulfuric acid (H 2 SO 4 ) concentration, temperature, solid/liquid (S/L) ratio, and particle size on the total REE (TREE) recovery were systematically examined. The REE mineralogy and the involved leaching mechanisms were investigated by microscopic characterization and residue re-leaching tests. It was found that approximately 80% of REEs was extracted using 1 M H 2 SO 4 at 75 °C for 2 h. Increasing temperature significantly improved the REE extraction, while changing acid type, H 2 SO 4 concentration, and particle size did not. The TREE recovery also gradually decreased at higher S/L ratios. The low fraction of Si leached (<4.0%) suggested that the extraction did not significantly alter the crystal structure of the dominant mineral. The leaching kinetics of REEs were fast within the first 10 min, followed by a much slower stage (i.e., 10-120 min). The kinetic modeling results showed that each stage may be controlled by both chemical reaction and diffusion (i.e., mix control). The activation energies for REE leaching using 1 M H 2 SO 4 in the 0-10 min and 10-120 min were determined to be 20.3 and 10.8 kJ/mol, respectively. Finally, the residue re-leaching results suggested that the fast leaching kinetics at the beginning may be explained by the preferential decomposition of metamict allanite rather than the formation of silica gel, while the following slower leaching stage was due to the dissolution of difficult-to-leach REE-bearing minerals such as well-crystallized allanite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Using the Carbon Capture Simulation Initiative (CCSI) Tool to Design the Experiments in the Parametric Campaign of a Novel Compact Absorber for Carbon Capture

Gas absorption towers with structured packing and solvent have been used for Carbon Dioxide (CO 2 ) Capture for about many decades. To overcome process limitations and practical disadvantages for CO 2 capture from the stationary emitter (e.g. NG and coal power plant), many new designs have been proposed and explored at the various scales in the last decade with aim of either low energy penalty or low capital cost. To reduce the size of the absorption tower and hence the total cost of CO 2 capture, the University of Kentucky Center for Applied Energy Research Center (UK CAER) has designed and built a novel CO 2 capture absorption tower or Compact Absorber, integrated into an existing large-bench scale CO 2 capture unit. The Compact Absorber has three sections. The top of the column is a fogging section where the solvent is sprayed through a nozzle producing droplets flowing downward in a co-current fashion with the flue gas. The center of the column is a frothing section where the solvent and flue gas flow through regenerative frothing screens designed by Industrial Climate Solutions, Inc. The bottom of the column is a typical structured packing section were the flue gas and solvent flow in a counter-current fashion. The parametric campaign will be conducted in order to optimize the operating parameters for CO 2 capture including liquid/gas ratio, lean loading, and temperature, liquid residence time. A simulated flue gas with 14% CO 2 will be used along with a UK CAER developed proprietary solvent. The 100-hour parametric campaign is designed using a statistical approach of the Sequential Design of Experiments (sDOE). sDOE is one of the CCSI tools that provides an adaptive statistical approach for designing future experiments based on the results of previous experiments. Application of a typical DOE provides the user with the minimum number of experiments required to get the same data, but sDOE allows the user to make an informed choice of experiments based on the results of previous experiments. The complete absorption column has been constructed and has been partially commissioned. Initial data has been collected by operating using the fogging section and the frothing section. The fogging section produces solvent droplets of about 100 μm sauter mean diameter and as small as 25 μm using a hydraulic nozzle by BETE. The frothing section produces bubbles of about 5mm with high mixing of solvent promoting the higher mass transfer from gas to liquid. The absorber reaches the capture efficiency of about 50% with only two sections in operation. Based on the current results, it can be deduced that increasing the solvent feed temperature and including the packed section for absorption the capture efficiency will increase further. Initial data will be collected using all three sections of the absorber and will be used for sDOE. Non-Uniform Space Filling model of sDOE will be used to prioritize the input conditions resulting into maximum capture efficiency. sDOE is performed using the platform called Framework Optimization, Quantification of Uncertainty, and Surrogates (FOQUS). The method and results demonstrating the progress of the parametric campaign from the initial set of experiments to the final stage of obtaining optimized parameters using sDOE tool will be presented in detail.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

New High-Entropy Perovskite Oxides with Increased Reducibility and Stability for Thermochemical Hydrogen Generation

This project aims to design, synthesize, and test a transformative class of High-Entropy Perovskite Oxides (HEPOs) as redox oxides to enable thermochemical hydrogen generation with improved stability, kinetics, and efficiency. These developed HEPOs are expected to demonstrate improved kinetics with oxygen surface exchange coefficient ( k > 7.5×10 -4 cm/s) in Budget Period (BP) 1, retain its structural stability in a broad range of oxygen non-stoichiometry (Δδ > 0.15) at a low operating reduction temperature of T red < 1400°C in BP 2, and deliver a H 2 yield of over 400 µmol per gram of oxide and high stability with less than 20% degradation after at least 50 cycles in BP 3. This project is feasible due to the unique thermodynamic properties (simultaneously increased reducibility and phase stability) and kinetic characters (stability against particle coarsening and potentially enhanced oxygen transport and surface reaction kinetics) of such HEPOs, and it is enabled by a unique active learning computational design approach. Computational studies have been conducted to investigate the oxygen vacancy formation in complex perovskite systems. * Accurate prediction of V O .. concentration with disordered A-site cations in Fe-based high-entropy perovskite oxides * Combined MC/DFT computation elucidates the mechanism of Co preference on the redox due to the strain introduced by local distortion. In this project, we explored a large number (~150) of perovskite compositions, which are listed in Tables 2 – 4). * All perovskite specimens have been synthesized through a high-throughput high-energy ball milling process, followed by the conventional sintering process. * XRD, SEM/EDS and TGA were performed to confirm the crystal structure, phase homogeneity and oxygen non-stoichiometry for compositionally complex perovskite oxides (CCPOs). * 110 compositions show single-phase from XRD * Unusual aliovalent doping effects in medium-entropy perovskite compositions. * V-shape relation between Δδ vs. x (La 1-x Sr x )(Mn 1/3 Fe 1/3 Ti 1/3 )O 3 * The highest reported hydrogen production for the CCPOs made in this project ( T re = 1350 ºC 30 min, T Ox = 1100 ºC 30 min) * B-site mixing (La 0.8 Sr 0.2 )(Mn 0.2 Fe 0.2 Co 0.4 Al 0.2 )O 3 : 89.97 ± 2.73 mmol H2 /mol oxide (395 ± 10 μmol/g oxide ) (i) No phase transformation during reactions when Co molar ratio is less than 61% (ii) Balance between intrinsic kinetics (oxygen surface exchange) and thermodynamics (oxygen non-stoichiometry) (iii) Preference of Co identified by in-situ XPS * A-site mixing (La 1/6 Pr 1/6 Nd 1/6 Gd 1/6 Ba 1/6 Sr1/6)MnO 3 : 98.48 mmol H2 /mol oxid e (~415 μmol/g oxide )

08 HYDROGEN↗
DOE OSTI2022

Collective effect of thermal plumes on temperature fluctuations in a closed Rayleigh–Benard convection cell

Here, we report a systematic study of the collective effect of thermal plumes on the probability density function (PDF) P(δT) of temperature fluctuations δT(t) in turbulent Rayleigh-Benard convection. By decomposing δT(t) into four basic fluctuation modes associated with single and multiple warm and cold plumes and a turbulent background, we derive an analytic form of P(δT) based on the convolutions of the five independent modes. To test the derived form of P(δT) in the multiple-plume regions, where the thermal plumes are heavily populated, we conduct time series measurements of temperature fluctuations in two convection cells; one is a vertical thin disk and the other is an upright cylinder of aspect ratio unity. For a given normalized position in most regions of the convection cell, all of the measured PDFs P(δT) for different Rayleigh numbers fall onto a single master curve, once δT is normalized by its rms value σ T . It is found that the measured P(δT / σT ) at different locations along the symmetric horizontal and vertical axes of the convection cells can all be well described by the derived form of P(δT / σT ). The fitted values of the parameters associated with the number of plumes in multiple plume clusters and their relative strengths and degrees of intermittency are closely linked to the spatial distribution of thermal plumes and local dynamics of the large-scale circulation in a closed convection cell. Our work thus provides a unified theoretical approach for understanding scalar PDFs in a turbulent field, which is very useful not only for the present study but also for the study of many turbulent mixing problems of practical interest.

42 ENGINEERING↗
DOE OSTI2021

Hotel Room Computational Fluid Dynamics to Investigate Airborne Pathogen Dispersal Patterns

A hotel room unit consisting of a bedroom and bathroom was modelled using computational fluid dynamics (CFD) to investigate airborne pathogen dispersal patterns. The full-scale model includes a ‘typical’ hotel room configuration, furniture, and vents. The air sources and sinks include a bathroom vent, a heating, ventilation, and cooling (HVAC) unit located in the bedroom, and a ½” gap at the bottom of the entry door. In addition, the entry door and window can be opened or closed, as desired. Three key configuration simulations were conducted: 1) both the bathroom vent and HVAC were on, 2) only the HVAC was on, and 3) only the bathroom vent was on. If the HVAC air is from a fresh, clean source, or passes through a high-efficiency filter/UV device, then the first configuration is the safest, as contaminated air is highly reduced. The second configuration is also safe, but does not benefit from the outsourcing of potentially-infected air, such as contaminated air flowing through an ineffective filter. The third configuration should be avoided, as the bathroom vent causes air to flow from the hallway, which can be of dubious origin. The CFD simulations also showed that recirculation and swirling regions tend to accumulate the largest concentrations of heavier airborne particles, pathogens, dust, etc. These regions are associated with the largest turbulence kinetic energy (TKE) , and tend to occur in areas with flow recirculation and corners. Therefore, TKE presents a reasonable metric to guide the strategic location of pathogen mitigation devices. The simulations show complex flow patterns with distinct upper and lower flow regions, swirling flow, and significant levels of turbulent mixing. These simulations provide intriguing insights that can be applied to help mitigate pathogen aerosol dispersal, generate building design guidelines, as well as provide insights for the strategic placement of mitigation devices, such as ultraviolet (UV) light, supplemental fans, and filters.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Lithiation Gradients and Tortuosity Factors in Thick NMC111-Argyrodite Solid-State Cathodes

Achieving high energy density in all-solid-state lithium batteries will require the design of thick cathodes, and these will need to operate reversibly under normal use conditions. We use high-energy depth-profiling X-ray diffraction to measure the localized lithium content of Li 1-x Ni 1/3 Mn 1/3 Co 1/3 O 2 (NMC111) through the thickness of 110 μm thick composite cathodes. The composite cathodes consisted of NMC111 of varying mass loadings mixed with argyrodite solid electrolyte Li 6 PS 5 Cl (LPSC). During cycling at C/10, substantial lithiation gradients developed, and varying the NMC111 loading altered the nature of these gradients. Microstructural analysis and cathode modeling showed this was due to high tortuosities in the cathodes. This was particularly true in the solid electrolyte phase, which experienced a marked increase in tortuosity factor during the initial charge. Our results demonstrate that current distributions are observed in sulfide-based composites and that these will be an important consideration for practical design of all-solid-state batteries.

25 ENERGY STORAGE↗
DOE OSTI2025

Machine protection system for coherent electron cooling experiment

The coherent electron cooling (CeC) experiment employs a 15 MeV electron beam with up to a few milliamperes current which is capable of destroying the vacuum equipment or intercepting beam diagnostics. The high-current beam can be delivered to two different dumps. RF systems include normal conducting and superconducting cavities which also require protection from abnormal conditions. In this paper, we describe in detail the design and operation of the machine protection system for the CeC accelerator.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Systematic Validation of Ensemble Cloud-Process Simulations using Polarimetric Radar Observations and Simulator over the NASA Wallops Flight Facility

The BiLateral Operational Storm-Scale Observation and Modeling (BLOSSOM) project was initiated to establish a long-term supersite to improve understanding of cloud physical states and processes as well as to support satellite and climate model programs over the WFF site via a bilateral approach of storm-scale observations and process modeling. This study highlights a noble systematic validation framework of the BLOSSOM ensemble cloud-process simulations through mixed-phase, light-rain, and deep-convective precipitation cases. The framework consists of creating a domain-shifted ensemble of large-scale forcing datasets, and configuring and performing cloud-process simulations with three different bulk microphysics schemes. Validation uses NASA S-band dual-POLarimetric radar (NPOL) observations in the form of statistical composites and skill scores via a polarimetric radar simulator and newly developed CfRad Data tool (CfRAD). While the simulations capture the overall structures of the reflectivity composites, polarimetric signals are still poorly simulated, mainly due to a lack of representation of ice microphysics diversity in shapes, orientation distributions, and their complex mixtures. Despite the limitation, this new ensemble-based validation framework demonstrates that 1) no particular forcing or microphysics scheme outperforms the rest and 2) the skill scores of coarse- and fine-resolution ensemble simulations with different domain-shifted forcing and microphysics schemes are highly correlated with each other with no clear improvement. On the other hand, this suggests that coarse-resolution ensemble simulations are relevant for selecting the best meteorological forcing and microphysics scheme before conducting computationally demanding large eddy simulations (LESs) in support of aircraft and satellite instrument development as well as cloud-precipitation-convection parameterizations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Examining the vertical heterogeneity of aerosols over the Southern Great Plains

Abstract. Atmospheric aerosols affect the global energy budget by scattering and absorbing sunlight (direct effects) and by changing the microphysical structure, lifetime, and coverage of clouds (indirect effects). Both aerosol direct and indirect effects are affected by the vertical distribution of aerosols in the atmosphere, which is further influenced by a range of processes, such as aerosol dynamics, long-range transport, and entrainment. However, many observations of these processes are based on ground measurements, limiting our ability to understand the vertical distribution of aerosols and simulate their impact on clouds and climate. In this work, we examined the vertical heterogeneity of aerosols over the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) using data collected from the Holistic Interactions of Shallow Clouds, Aerosols and Land Ecosystems (HI-SCALE) campaign. The vertical profiles of meteorological and aerosol physiochemical properties up to 2500 m above are examined based on the 38 flights conducted during the HI-SCALE campaign. The aerosol properties over the SGP show strong vertical heterogeneity and seasonal variabilities. The aerosol concentrations at the surface are the highest due to strong emissions at ground level. In general, the mode diameter of aerosols during summer (∼ 100 nm) is larger than that during spring (∼ 30 nm), a result of enhanced condensational growth due to enriched volatile organic compounds in summer. The concentration of aerosols below 30 nm in the boundary layer (BL) (e.g., below 1000 m) during spring is higher than that during summer, a result of the stronger new particle formation (NPF) events due to the reduced condensation sink in spring. In the BL, the size of the aerosols gradually increases with altitude due to condensational growth and cloud processing. However, the chemical composition of the aerosols remained similar, with organics and sulfates representing 59.8 ± 2.2 % and 22.7 ± 2.1 %, respectively, of the total mass in the BL. Through the vertical profiles of aerosol properties, we observed NPF events in the upper BL during 7 out of 38 research flights, where the newly formed particles continue to grow as they are mixed down to the surface. There is also an indication that deep convection brings aerosols from the free troposphere (FT) to the surface, where they grow to contribute to the cloud condensation nuclei (CCN). Overall, the vertical heterogeneity of aerosols over the SGP is influenced by aerosol dynamics (new particle formation, growth, and cloud processing) and transport processes (mixing in the BL, long-range transport, entrainment, and convective downward transport). Case studies showing the influence of these factors are discussed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Incentivizing Cold-Climate Efficiency in Juneau (Final Report)

This is the final technical report for the DOE EERE BTO project Incentivizing Cold-Climate Efficiency in Juneau. The project implemented a community energy campaign to deploy heat pumps and efficiency for residents of Juneau, in Southeast Alaska. The project helped Juneau make progress towards its renewable energy goal of reaching 80% renewable energy for space heating by 2045. The Incentivizing Cold-Climate Efficiency in Juneau (ICE-Juneau) project began in 2020 and concluded three years later in 2023. During that time, a group of implementation partners and a research advisory team instituted a beneficial electrification campaign to promote energy savings and carbon reduction in residences of Juneau, Alaska. The campaign, Thermalize Juneau, focused on the installation of single head ductless mini-split heat pumps along with other efficiency upgrades. Thermalize Juneau was the first campaign of its kind in Alaska. After several months of planning, registration opened to the public in early 2021, and over the course of six months 164 participants enrolled. Campaign staff provided education to homeowners on heat pumps and efficiency, and each participant received a one-on-one heat pump assessment using a custom Microsoft Excel-based calculator that estimated energy savings for their residence based on building characteristics and past utility bills. Participants could also obtain a free energy audit from one of the two local energy auditors to further inform their decision. A heat pump installer, electrician, and builder were selected via a competitive RFP process. Participants who felt ready to install a heat pump or other efficiency upgrades received a site visit and custom quote from each of these contractors free of charge, and if they still felt energy upgrades were right for them, could move forward with an individual contract. Participants received a $400 heat pump installation rebate, offered by the installer if 40 heat pump installations occurred through the campaign. Overall, the campaign facilitated 75 heat pump installations (including participants that went with another contractor or heat pump model) and 30 efficiency upgrades (including participants that went with another builder or did DIY upgrades). The campaign created 3 new jobs as the heat pump installer hired an administrative assistant and two apprentices over the course of the campaign. It also helped Juneau work toward achieving its renewable energy goal of 80% renewable energy for space heating by 2045 by upgrading houses from fuel oil to heat pumps powered by the hydropower electric grid. Researchers conducted four surveys to inform Thermalize Juneau and future energy campaigns. The first surveyed existing and prospective heat pump owners in Juneau to identify barriers the campaign could address and inform recruitment efforts. Entry and exit surveys provided information on participant demographics, goals, outcomes, and suggestions for improving future campaigns. And a final survey of community members who had not participated in Thermalize Juneau gave insight on ways future campaigns could include a greater diversity of participants so they could realize similar benefits. Researchers also used pre-campaign energy modeling to predict energy savings, which was then compared to the savings estimated through aggregation of heat pump assessments and energy audits, and later to actual energy savings of 10 participants who installed a heat pump and were able to provide complete energy use data sets. In addition to energy savings, and to assist the electric utility in future planning efforts, researchers analyzed the overall change in electric use across participants with energy data and heat pump installations. They also completed a life cycle cost analysis, showing positive net present values for those displacing a fuel oil appliance, and a more mixed case for those switching from electric baseboard. This project proved the feasibility of energy campaigns, with a goal of beneficial electrification, in cold, remote locations. The Thermalize Juneau team compiled a Guidebook to Thermalize Campaigns, available online. In addition to documenting what occurred in Alaska’s first thermalize campaign, it provides tips and resources for other communities wishing to implement a similar program.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Density Functional Theory Study of Controllable Optical Absorptions and Magneto-Optical Properties of Magnetic CrI 3 Nanoribbons: Implications for Compact 2D Magnetic Devices

A chromium triiodide (CrI 3 ) monolayer has an interesting ferromagnetic ground-state. In this work, we calculate band structures and magnetic moments of tensile-strained and bent zigzag CrI 3 nanoribbons with density functional theory. The edge iodine atoms form flat low-lying conduction bands and couple with chromium atoms ferromagnetically, while the non-edge iodine atoms weakly couple antiferromagnetically. Narrow CrI 3 nanoribbons have two locally stable magnetic moment orientations, namely out-of-plane and in-plane (along the nanoribbon periodic direction) configurations. This enables four magnetization states in CrI 3 nanoribbons, including two out-of-plane ones (up and down) and two in-plane ones (forward and backward along the nanoribbon periodical direction), increasing the operating controllability. Based on the one-dimensional Ising spin chain model, the spin correlation length of the narrow CrI 3 nanoribbon is estimated as about 10 Å at its estimated Curie temperature of 27 Kelvin, which is lower than the measured 45 Kelvin of the monolayer CrI 3 . The optical absorption and magneto-optical properties of CrI 3 nanoribbons are investigated with many-body perturbation GW-BSE (Bethe-Salpeter equation), including magnetic dichroism, Faraday and magneto-optical Kerr effects. Here, the low-energy dark excitons are mainly from transitions between electrons and holes with unlike spins and are non-Frenkel-like, while the bright excitons have mixed spin configurations. The intrinsic lifetime of excitons can be over one nanosecond, suitable for quantum information processes. Tensile strains and bending manifestly modulate the absorption spectra and magneto-optical properties of CrI 3 nanoribbons within a technologically important photon energy-range of ~1.0-2.0 eV. The CrI 3 nanoribbons can be used in 1D or 2D magnetic storage nanodevices, tunable magnetic optoelectronics, and spin-based quantum information controls.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Numerical study of proppant transport and settling processes in fractures

Reservoir stimulation by creating hydraulically conductive fractures is the key step for enabling enhanced geothermal systems (EGS). The effectiveness of stimulation is significantly influenced by the deposition of proppant inside induced fractures. The transportation and settling of proppant in a propagating fracture is controlled by a multitude of operational and physical parameters, including the fracturing fluid rheology, injection rate, proppant concentration, fracture length/aperture evolution, proppant size/density/shape, etc. A numerical tool that robustly and efficiently accounts for all important attributes can facilitate the design and optimization of reservoir stimulation. This study presents the novel computational tool ELK (ELectrical fracKing) developed for the numerical simulation of proppant-fluid mixture circulation in a fractured geothermal reservoir. We enriched the MOOSE-based PorousFlow module with a suite of equations to consider the fluid-proppant mixture with particle-particle/fluid interactions, which include gravitational settling, particle convection, particle hampering, and strong density and viscosity contrasts. The computational tool is validated by comparing the predicted proppant bed evolution against two different laboratory scale experiments of proppant transport in a fixed aperture channel. Further parameter studies were performed, and the modeling results show that the proppant deposition is determined by the mixing characteristics and settling of the particles from the slurry. Concentration-dependent density and viscosity lead to an inhomogeneous distribution of the proppant, particle collision, and enhanced settling at the bottom of the fractures. Preliminary coupling with dynamic fracture propagation shows promising results and will be further developed to simulate hydraulic stimulation at high fidelity.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Fiscal Year 2022. Filtration of Hanford Tank 241-AP-101 Supernatant at 16 °C

Bench-scale filtration testing of ~9 liters of supernatant from Hanford waste tank 241-AP-101, chilled to 16 °C, was conducted using a backpulse dead-end filter (BDEF) filtration system equipped with a feed vessel and a Mott inline filter Model 6610 (Media Grade 5) in the hot cells of the Radiochemical Processing Laboratory at Pacific Northwest National Laboratory. This was done to assess the performance of the anticipated third feed to the Tank Side Cesium Removal (TSCR) system. The as-received samples were diluted to the target sodium concentration and transferred to 1.5-liter polyethylene bottles and held at 16 °C for approximately 1 week prior to filtration. The feed was filtered through the BDEF system at a targeted flux of 0.065 gpm/ft 2 to match the prototypic operation of the TSCR system. During filtration, the differential pressure required to effect filtration at 0.065 gpm/ft 2 increased little over the filtration campaign and never reached 2 psid (the TSCR action limit). This indicates that the TSCR filter should perform well when processing AP-101 supernatant. After completing filtration of the AP-101 feed, the filter was cleaned. Solids concentrated from the backpulse solutions displayed sodium nitrate-type phases, aluminum and silicon phases reported as cancrinite or nitrate-cancrinite, a mixed chromium-aluminum oxide, iron oxides, and Ca-bearing phases (calcite). Scanning electron microscopy analyses showed that the average particle size was 0.5 micron.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Influence of Antarctic and Greenland Continental Shelf Circulation on High‐Latitude Oceans in E3SM

The science objectives of this project are to simulate and understand the impacts of both deep-basin warm-water intrusions and land-ice melt on the continental shelf circulations and sea-ice distributions around the margins of Greenland and Antarctica. As well, the role of subsurface ocean heat from the Atlantic on declining sea-ice cover in the Arctic is explored. Mesoscale processes and fine bathymetry are implicated in cross-shelf property transports around both Greenland and Antarctica. Therefore, we configured and ran an atmospheric reanalysis-forced global ocean/sea-ice simulation on a grid that reduces from 8 km at the Equator to 2 km at the poles (UH8to2) with 60 vertical levels. It was produced using the Energy Exascale Earth System Model ‘‘HiLAT’’ code (E3SMv0-HiLAT) that uses the Parallel Ocean Program (POP) and CICE5 as its ocean and sea-ice components, respectively. Two main UH8to2 simulations were carried out: one for 1975-2009 and the other for July 2016-2020 after it was initialized from a 1/25° data-assimilative ocean/sea-ice prediction system ocean/sea-ice state. The UH8to2 is not coupled to an active land-ice model. Rather, land-ice melt is represented by observationally informed freshwater fluxes (FWFs). Short (multi-year) UH8to2 simulations were conducted to understand sensitivities when Greenland ice sheet (GrIS) melt is released only at the ocean surface or when it is distributed over the upper water column in accordance with fjord melt plume behavior; these cases were compared with a no GrIS melt case. West Greenland continental shelf currents were fastest in the vertical distribution case and an increase in baroclinic conversion at the shelf break associated with increased eddy kinetic energy was found relative to the surface release case. Further, salinity is lower and meltwater volume greater in the eastern Labrador Sea in the vertical distribution case. For the Arctic, the veracity of the UH8to2 was evaluated for 2017-2020 using available observations. Simulated seasonal sea-ice thickness and concentration are realistic, but the ice is unrealistically thin in the central and eastern Arctic in the fall. Comparisons of vertical sections of ocean temperature, salinity, and buoyancy collected from Ice-Tethered Profilers (ITPs) in the eastern Arctic in the fall and winter of 2019/2020 and co-located/concurrent UH8to2 fields show the stratification over the top 100 m of the water column is too low in the model, the simulated mixed layer too deep, and the simulated subsurface Atlantic Water (AW) too warm; these biases may contribute to the sea-ice biases. A model intercomparison study using the UH8to2 and a forced 1/25° regional Arctic ocean/sea-ice (uses the HYbrid Coordinate Ocean Model and CICE5) simulation further investigates the relationship between AW and sea-ice in the eastern Arctic. The models show a mesoscale-rich pulse of Atlantic Water extending into the eastern basin that reaches maximum intensity in late winter of 2018, after which it decreases in strength. Concurrent and co-located sea-ice melt or the inhibition of sea-ice growth is seen and is attributed to halocline mesoscale eddies doming into the mixed layer with convection bringing this heat into the vicinity of the sea-ice.

58 GEOSCIENCES↗
DOE OSTI2020

Aging of Concrete for the Evaluation of Repair Materials to Protect the Walls of the HCAEX Tunnel at Savannah River - 20301

H-Canyon, located in the Savannah River site, is a unique facility for chemical reprocessing of plutonium, highly-enriched uranium, and other radioactive materials. The exhaust gases of the H-Canyon are sent through the H-Canyon Exhaust (HCAEX) tunnel for contamination removal. Robotic inspections of the tunnel revealed significant degradation of the reinforced concrete structure that was associated with acid attack, and could compromise the structural stability of the tunnel. Thus, the identification and evaluation of potential repair materials that could be applied on the degraded walls to mitigate and prevent further degradation is of significant interest to the Department of Energy and the Savannah River representatives. This research effort has been divided into two phases: 1) Development and evaluation of aged concrete under accelerated aging conditions (which is the focus of this paper) and 2) Evaluation of potential repair materials applied on aged and non-aged concrete under simulated aggressive conditions. In order to develop and evaluate concrete samples exposed to accelerated aging conditions in simulated aggressive environments, a literature review of the HCAEX tunnel was conducted that included 1) characterization and extent of the concrete damage, 2) environmental conditions inside the tunnel and 3) primary deterioration mechanisms. In addition, potential coatings and/or repair materials for degraded concrete surfaces exposed to aggressive environments (primarily acidic) were selected from the literature review and the most common testing and measurements for evaluating acid attack phenomena, erosion, etc. were reviewed. From the literature review findings, a preliminary bench-scale test plan for the concrete aging was developed, including accelerated aging tests with aggressive conditions (acid fumes, humidity, etc.). Concrete samples were exposed to the aging accelerated conditions (e.g. immersion in acid solutions) and visual inspection, mass loss and pH change (acid solution) were recorded over time. Correlations between the visual inspection, mass loss and pH changes results and the aging time or the aging conditions were developed. Specimens submitted to the highest acid concentration showed the fastest and most intense degradation. The type of coarse aggregate (limestone) used for the concrete seemed to be the cause of the fastest aging observed, compared to the cement paste. The research findings created the foundation for the ongoing investigation, in which new concrete samples with a mix design similar to the HCAEX tunnel will be tested and will serve as the substrate for testing the selected coatings and /or repair materials. In this paper, the literature review and preliminary results from the aging tests are provided. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

Tuning Optical and Electrical Properties of Vanadium Oxide with Topochemical Reduction and Substitutional Tin

Vanadium oxides are widely tunable materials, with many thermodynamically stable phases suitable for applications spanning catalysis to neuromorphic computing. The stability of vanadium in a range of oxidation states enables mixed-valence polymorphs of kinetically accessible metastable materials. Low-temperature synthetic routes to, and the properties of, these metastable materials are poorly understood and may unlock new optoelectronic and magnetic functionalities for expanded applications. In this work, we demonstrate topochemical reduction of α-V 2 O 5 to produce metastable vanadium oxide phases with tunable oxygen vacancies (>6%) and simultaneous substitutional tin incorporation (>3.5%). The chemistry is carried out at low temperature (65 °C) with solution-phase SnCl 2 , where Sn 2+ is oxidized to Sn 4+ as V 5+ sites are reduced to V 4+ during oxygen vacancy formation. Despite high oxygen vacancy and tin concentrations, the transformations are topochemical in that the symmetry of the parent crystal remains intact, although the unit cell expands. Band structure calculations show that these vacancies contribute electrons to the lattice, whereas substitutional tin contributes holes, yielding a compensation doping effect and control over the electronic properties. The SnCl 2 redox chemistry is effective on both solution-processed V 2 O 5 nanoparticle inks and mesoporous films cast from untreated inks, enabling versatile routes toward functional films with tunable optical and electronic properties. The electrical conductance rises concomitantly with the SnCl 2 concentration and treatment time, indicating a net increase in density of free electrons in the host lattice. This work provides a valuable demonstration of kinetic tailoring of electronic properties of vanadium–oxygen systems through top-down chemical manipulation from known thermodynamic phases.

36 MATERIALS SCIENCE↗