Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “limited data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Compliance measurements.

The uses of compliance measurements in linear fracture mechanics are discussed as a technique for determining the crack-extension force vs load, specimen dimensions, and elastic constants. Some practical examples of application are given, including specimen and transducer descriptions, experimental procedure, instrumentation, calculations, measurement precautions, friction effects, and data reduction. The limitations and advantages of compliance measurements are discussed. It is pointed out that good results can be obtained by the compliance method when its measurement precision is not lower than that required for Young's modulus.

Bubsey, R. T.↗

Kinetics of CO2 production on Venus.

Consideration of theoretical limits and experimental data for the kinetics of the reaction quartz plus calcite yields wollastonite plus CO2 supports the concept of a short-term quasi-equilibrium state for the atmosphere of Venus. These data indicate that the time scale of this reaction and of any competing CO2 producing reaction may be as short as several hundred years or less at the inferred Venus surface temperatures.

Mueller, R. F.↗

Effect of configuration variation on externally blown flap noise

The sensitivity of flap interaction noise to variations in engine-under-the-wing externally blown flap geometry was investigated with a large cold-flow model. Both 2- and 3-flap wing sections (7-ft chord) with trailing flap angles up to 60 deg were employed. Exhaust nozzles included coaxial, plug, and 8- and 13-inch diameter conical configurations. These nozzles were tested at two positions below the wing. The effects of these geometry variations on noise level, directivity, and spectral shape are summarized in terms of exhaust flow parameters evaluated at the nozzle exit and at the flap impingement station. The results are also compared with limited flap noise data available from tests using real engines.

Dorsch, R. G.↗

Correlations and linkages between the sun and the earth's atmosphere: Needed measurements and observations

A summary of needed measurements and observations is reported to identify the sequence of processes leading from change in solar input to change in tropospheric circulation and weather. Changes in the solar electromagnetic radiation have to be carefully monitored since variations over the solar cycle are small (less than one percent). It is suggested that changes in the ionization at the Pfotzer maximum could influence the formation of thunderstorms by changing the electric potential gradient. This could be checked by measuring the global atmospheric electric field. As an example of spacecraft observations, a worldwide distribution plot of nocturnal thunderstorms compiled from OSO-5 data shown; no obvious correlation with solar data had been found, but the time span of the data is rather limited and more sophisticated observation techniques could be used. Continuous and careful monitoring is recommended of the input of electromagnetic and particle radiation into the earth's atmosphere ozone distributions in the region above 30 km, and wind systems in the mesosphere and lower thermosphere. In addition, special phenomena suspected to be important in the causal chain, such as cirrus cloud formation at high latitudes and thunderstorm activity, should be monitored on a global basis.

Kellogg, W. W.↗

Check out of rebuilt optical cross-beam units

Preliminary evaluations of limited cross beam data taken with the rebuilt optical cross beam units at the Gun Barrel Hill Test Site of ESSA are presented. The evaluations were made using the analogue Princeton Time Correlator. A study of these evaluations indicates that the rebuilt units are performing satisfactorily. However, there are indications that, in order to obtain useful information from the cross-correlations, it is essential to make judicious choices of computation time and frequency band pass filtering for the analysis of the data.

Huff, L. L.↗

U.S. view of human problems to be addressed for long duration space flights

The Russian and American space programs have consisted of several thousands of hours of exposure of man to the space environment. In spite of numerous biological phenomena of adaptation observed, the space travellers have displayed, after their return, no enduring pathological effect. Although the usable data remain too limited to reflect fully the effects of space flight, it is possible to sketch the biological responses in the absence of gravity and to define the work bases for the future. Beyond its basic physiological effects, weightlessness has operational consequences in the daily life of the astronauts. These consequences will be still more evident during missions of long duration. The conclusions drawn in flight as well as on the ground are reviewed, and future requirements concerning prolonged flights are outlined. The gaps in actual knowledge are discussed and solutions are suggested. The problems of habitability are considered, particularly those which remain at present without satisfactory solutions: psychological responses to a confined life, cleaning, hygiene, and used material.

Berry, C. A.↗

Effect of configuration variation on externally blown flap noise

The sensitivity of flap interaction noise to variations in engine-under-the-wing externally blown flap geometry was investigated with a large cold-flow model. Both two- and three-flap wing sections (7-ft chord) with trailing flap angles up to 60 deg were employed. Exhaust nozzles included coaxial, plug, and 8- and 13-in.-diam conical configurations. These nozzles were tested at two positions below the wing (19-1/4 and 29-1/4 in.). The effects of these geometry variations on noise level, directivity, and spectral shape are summarized in terms of exhaust flow parameters evaluated at the nozzle exit and at the flap impingement station. The results are also compared with limited flap noise data available from tests using real engines.

Dorsch, R. G.↗

Scanning thermal plumes

Over a three-year period 800 thermal line scans of power plant plumes were made by an airborne scanner, with ground truth measured concurrently at the plants. Computations using centered finite differences in the thermal scanning imagery show a lower bound in the horizontal temperature gradient in excess of 1.6 C/m. Gradients persist to 3 m below the surface. Vector plots of the velocity of thermal fronts are constructed by tracing the front motion in successive thermal images. A procedure is outlined for the two-point ground calibration of a thermal scanner from an equation describing the scanner signal and the voltage for two known temperatures. The modulation transfer function is then calculated by input of a thermal step function and application of digital time analysis techniques using Fast Fourier Transforms to the voltage output. Field calibration tests are discussed. Data accuracy is limited by the level of ground truth effort chosen.

Scarpace, F. L.↗

Preliminary analysis of 15 GHz scintillations on an ATS-5 satellite-to-ground path

Although the ATS 5 satellite failed to de-spin, a rather intricate analysis procedure allows the extraction of scintillation information at spectral rates from 20 to 60 Hz, as well as below 0.5 Hz. The procedure has been applied to 15.3 GHz signals. Distributions and spectra were obtained for a limited amount of data, representing a variety of meteorological conditions. A definite correlation of scintillation strength and variability with rainfall is apparent. The data analysis is continuing.

Levis, C. A.↗

Correlations by the entrainment theory of thermodynamic effects for developed cavitation in venturis and comparisons with ogive data

A semi-empirical entrainment theory was employed to correlate the measured temperature depression, Delta T, in a developed cavity for a venturi. This theory correlates Delta t in terms of the dimensionless numbers of Nusselt, Reynolds, Froude, Weber and Peclet, and dimensionless cavity length, L/D. These correlations are then compared with similar correlations for zero and quarter caliber ogives. In addition, cavitation number data for both limited and developed cavitation in venturis are presented.

Billet, M. L.↗

Effect of heating method on stress-rupture life

The effect of radiant(furnace), resistance(electric current), burner(hot gas stream), and a combination of resistance and burner heating on intermediate time (100 to 300 hr) stress-rupture life and reduction of area was evaluated. All heating methods were studied using the nickel-based alloy Udimet 700 while all but burner heating were evaluated with the cobalt-based alloy Mar-M 509. Limited test results of eight other superalloys were also included in this study. Resistance heated specimens had about 20 to 30 percent of the stress-rupture life of radiant heated specimens. The limited burner heating data showed about a 50 percent life reduction as compared to the radiant heated tests. A metallurgical examination gave no explanation for these reductions.

Bizon, P. T.↗

An optimal smoothing algorithm for Viking spacecraft attitude determination

A fundamental requirement for ground analysis of onboard attitude control systems is the determination of the time evolution of spacecraft angular orientation and velocity, and of external torques acting on the spacecraft. However, at times, there are limitations on the data received on the ground, and essential but missing variables must be estimated. This paper contains a description of the design and implementation of an algorithm for angular position, velocity, and torque estimation. The algorithm has been used to analyze the performance of the Viking Orbiter attitude control system. Typical results of this analysis are presented.

Rodriguez, G.↗

RPV application of a globally adaptive rate controlled compressor

A globally adaptive image compression structure is introduced for use in a tactical RPV environment. The structure described would provide an operator with the flexibility to dynamically maximize the usefulness of a limited and changing data rate. The concepts would potentially simplify system design while at the same time improving overall system performance.

Rice, R. F.↗

Future use of digital remote sensing data

Users of remote sensing data are increasingly turning to digital processing techniques for the extraction of land resource, environmental, and natural resource information. This paper presents the results of recent and ongoing research efforts sponsored, in part, by NASA/Marshall Space Flight Center on the current uses of and future needs for digital remote sensing data. An ongoing investigation involves a comprehensive survey of capabilities for digital Landsat data use in the Southeastern U.S. Another effort consists of an evaluation of future needs for digital remote sensing data by federal, state, and local governments and the private sector. These needs are projected into the 1980-1985 time frame. Furthermore, the accelerating use of digital remote sensing data is not limited to the U.S. or even to the developed countries of the world.

Spann, G. W.↗

Searches for correlated X-ray and radio emission from X-ray burst sources

The NRAO Green Bank interferometer has been used to monitor MXB 1730-335 and MXB 1837+05 during periods when 68 X-ray bursts were detected by X-ray observations. No significant radio emission was detected from these objects, or from MXB 1820-30 and MXB 1906+00, which emitted no bursts throughout the simultaneous observations. The data place upper limits on radio emission from these objects in the 2695 and 8085 MHz bands.

Johnson, H. M.↗

Reaping the space investment

By 1999 operational space systems will be implemented routinely on a worldwide scale in many areas vital to human survival and life quality. Geosynchronous-based monitoring and observation will be extensively used. The Shuttle era will bring in the capability to allow monitoring and identifying pollution sources which fail to stay within required limits. Remotely sensed data over land masses will provide needed facts on renewable and nonrenewable earth resources. New instruments and techniques will have been developed to provide geologists with clues to the declining number of deposits of fuels and minerals. Also, practical methods for predicting earthquakes will have been elaborated by 1999. Communications will see implementation of many of the technological goals of 1978.

Calio, A. J.↗

Analysis of long-term ionizing radiation effects in bipolar transistors

The ionizing radiation effects of electrons on bipolar transistors have been analyzed using the data base from the Voyager project. The data were subjected to statistical analysis, leading to a quantitative characterization of the product and to data on confidence limits which will be useful for circuit design purposes. These newly-developed methods may form the basis for a radiation hardness assurance system. In addition, an attempt was made to identify the causes of the large variations in the sensitivity observed on different product lines. This included a limited construction analysis and a determination of significant design and processes variables, as well as suggested remedies for improving the tolerance of the devices to radiation.

Stanley, A. G.↗