Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “lifetime”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Significant Improvements to Si Calendar Lifetime Using Rapid Electrolyte Screening via Potentiostatic Holds

Silicon-based lithium-ion batteries exhibit severe time-based degradation resulting in poor calendar lives. This has been identified as the major impediment towards commercialization with cycle life considered a solved issue through nanosizing and protective coatings allowing over 1000 cycles of life to be achieved. In this work, rapid screening of sixteen electrolytes for calendar life extension of Si-rich systems (70 wt% Si) is performed using the voltage hold (V-hold) protocol. V-hold significantly shortens the testing duration over the traditional open circuit voltage reference performance test allowing us to screen electrolytes within a span of two months. We find a novel ethylene carbonate (EC) free electrolyte formulation containing lithium hexafluorophosphate (LiPF 6 ) salt, and binary solvent mix of fluoroethylene carbonate (FEC), ethyl methyl carbonate (EMC) that extends calendar life of Si cells as compared to conventional EC based electrolyte. Our coupled experimental-theoretical analysis framework provides a decoupling of the parasitic currents during V-hold, allowing us to extrapolate the capacity loss to predict semiquantitative calendar lifetimes. Subsequently, cycle aging and oxidative stability tests of the EC free system also show enhanced performance over baseline electrolyte.

25 ENERGY STORAGE↗

The Solid Electrolyte Interphase Dispersion Can Predict Cycle and Calendar Lifetimes in Silicon Anodes for Lithium-Ion Batteries

The solid electrolyte interphase (SEI) plays a critical role in lithium-ion battery (LIB) anodes. It is responsible for passivating the reactive surface of lithiated anodes against degradation of the electrolyte which enables long cycle and calendar lifetimes for LIBs. This role is especially important in high energy density anodes like silicon, that undergo massive volumetric changes during electrochemical cycling. The mechanism by which the SEI performs this role, however, is not clear which makes designing an SEI to passivate silicon anodes impossible. Through decades of research, dozens of chemical species have been identified within the SEI ranging from inorganic solids to polymeric coatings all of which simultaneously exist in a 'mosaic' composition at the anode surface. This mosaic creates a highly dispersive environment in which electrostatic screening of the anode surface from the electrolyte is not always complete. Here, we present an electrochemical technique to directly test the dispersion at the anode surface. We use this technique to screen more than 20 different electrolytes against silicon anodes and find correlations between both the cycle life and calendar life. The insights from this study offer a new framework to think about the SEI and a rapid screening method to test novel electrode/electrolyte combinations.

battery↗

2019 CSP Lifetime data CESL015 DE-EE0001556

Data set for project to model the lifetime of structural alloys in supercritical carbon dioxide at 700°-800°C. The mass change data is provided for oxidation in 500-h cycles and 10-h cycles in 0.1 and 30 MPa. After exposure, oxide thickness and depth of internal oxidation were measured at intervals from 1-10 kh. Four alloys were studied: Sanicro 25 (stainless steel) and Ni-based alloys 625, Haynes 282 and Inconel 740H.

14 SOLAR ENERGY↗

GPU Lifetimes on Titan Supercomputer: Survival Analysis and Reliability

George Ostrouchov, Don Maxwell, Rizwan Ashraf, Mallikarjun Shankar, and James Rogers. 2020. GPU Lifetimes on Titan Supercomputer: Survival Analysis and Reliability. In Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis (SC '20). Association for Computing Machinery, New York, NY, USA. Data and code for SC20 paper about Titan GPU reliability analysis: https://github.com/olcf/TitanGPULife. Includes R code to generate graphics for paper and additional analyses. See code/README for instructions. Includes original Titan GPU reliability data on over 100,000 collective hours of operation: data/titan.gpu.history.txt - history data, data/titan.service.txt - service nodes for exclusion. Includes output data files produced by code/TitanGPUmodel.Rmd: data/gc_full.csv - cleaned up data (see paper and R code); data/gc_summary_loc.csv - one record per GPU (variables: SN, time, nlife, nloc, last, col, row, cage, slot, node, max_loc_events, time_max_loc, dbe, dbe_loc, otb, otb_loc, out, batch, days, years, dead, dead_otb, dead_dbe) (see paper and R code). Includes .Rmd analysis document as TitanGPUmode.html. Includes Python code to process data/gc_full.csv into graphics from time-between-failure analyses: See code/tbf-analyses/README for instructions.

42 ENGINEERING↗

Efficient general method for numerically modeling laser pulse propagation, overlap, and lifetime effects in amplifiers

An efficient numerical time-dependent general method is developed to address incoherent pulse overlap and lifetime effects in laser amplifiers. The alternating propagation-population laser energetics method (APPLE) has been validated against a semi-discrete coupled rate equation numerical method (SDRE) and analytic formalisms in bounding cases. APPLE is based on decoupled rates applied to a time-dependent framework where both space-time-dependent populations and pulse energetics are consistently updated in each time step. A significant advantage of APPLE lies in its conceptual simplicity, ease of implementation, and relatively small computational cost. SDRE tracks the populations through coupled rates and uses the method of lines to discretize the hyperbolic partial differential transport equations allowing for use of ordinary differential equation solvers. With reasonably sized mesh, we report both energetic and power pulse shape relative differences on the order of one percent between the models over a large range of initial conditions.

47 OTHER INSTRUMENTATION↗

Optical damage performance of conductive widegap semiconductors: spatial, temporal, and lifetime modeling

The optical damage performance of electrically conductive gallium nitride (GaN) and indium tin oxide (ITO) films is addressed using large area, high power laser beam exposures at 1064 nm sub-bandgap wavelength. Analysis of the laser damage process assumes that onset of damage (threshold) is determined by the absorption and heating of a nanoscale region of a characteristic size reaching a critical temperature. We use this model to rationalize semi-quantitatively the pulse width scaling of the damage threshold from picosecond to nanosecond timescales, along with the pulse width dependence of the damage threshold probability derived by fitting large beam damage density data. Multi-shot exposures were used to address lifetime performance degradation described by an empirical expression based on the single exposure damage model. A damage threshold degradation of at least 50% was observed for both materials. Overall, the GaN films tested had 5-10 × higher optical damage thresholds than the ITO films tested for comparable transmission and electrical conductivity. This route to optically robust, large aperture transparent electrodes and power optoelectronics may thus involve use of next generation widegap semiconductors such as GaN.

36 MATERIALS SCIENCE↗

A Project Lifetime Approach to the Management of Induced Seismicity Risk at Geologic Carbon Storage Sites

The geologic storage of carbon dioxide (CO 2 ) is one method that can help reduce atmospheric CO 2 by sequestering it into the subsurface. Large-scale deployment of geologic carbon storage, however, may be accompanied by induced seismicity. We present a project lifetime approach to address the induced seismicity risk at these geologic storage sites. This approach encompasses both technical and nontechnical stakeholder issues related to induced seismicity and spans the time period from the initial consideration phase to postclosure. These recommendations are envisioned to serve as general guidelines, setting expectations for operators, regulators, and the public. They contain a set of seven actionable focus areas, the purpose of which are to deal proactively with induced seismicity issues. Although each geologic carbon storage site will be unique and will require a custom approach, these general best practice recommendations can be used as a starting point to any site-specific plan for how to systematically evaluate, communicate about, and mitigate induced seismicity at a particular reservoir.

58 GEOSCIENCES↗

Electron Bombardment of ZnTe EO Bunch Charge Detector for Signal Lifetime Studies in Radiation Environment

Electro-optic detection of bunch charge distribution utilizing the nonlinear Pockel's and Kerr effect of materials has been implemented at various facilities as a method of passive detection for beam preservation throughout characterization. Most commonly, the inorganic II-VI material ZnTe is employed due to it's strong Pockel's EO effect and relatively high temporal resolution (~90 fs). Despite early exploration of radiation damage on ZnTe in exploration of semi-conductor materials in the 1970's, full characterization of EO response over radiation lifetime has yet to be performed. The following poster presents a method for ZnTe crystal characterization studies throughout radiation exposure at various energies and dosages by analyzing the changes in index of refraction including bulk uniformity, and THz signal response changes.

Williams, J.↗

Quantum efficiency and lifetime study for negative electron affinity GaAs nanopillar array photocathode

Recent studies showed significant improvement in quantum efficiency (QE) by negative electron affinity (NEA) GaAs nanopillar array (NPA) photocathodes over their flat surface peers, particularly at 500 ─ 800 nm waveband. However, the underlying physics is yet to be well understood for further improvement in its performance. In this report, NEA GaAs NPA photocathodes with different dimensions were studied. The diameter of the nanopillars varied from 200 ─ 360 nm, the height varied from 230 ─ 1000 nm and the periodicity varied from 470 ─ 630 nm. The QE and photocathode lifetime were measured. Mie-resonance enhancement was observed at tunable resonance wavelengths. Simulations was also performed to understand the mechanism of photo-absorption and possible ways to further improve the photocathode performance to meet the stringent requirement of the electron sources in large scale electron accelerators. **Acknowledgement** Authored by Jefferson Science Associates, LLC under U.S. DOE contract no. DE-AC05-06OR23177. The U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce this manuscript for U.S. Government purposes. *mrahm008@odu.edu

Rahman, M.↗

Lifetime extension of legacy CEBAF LLRF hardware

A significant portion of the Low-Level Radio Frequency (LLRF) hardware in Jefferson Lab’s CEBAF is from the original construction of the facility using 1980’s CAMAC technology. Of the fifty-three zones in CEBAF, thirty-six of them are legacy hardware. The age of the legacy system has led to difficulties in maintaining the hardware due to parts going obsolete without suitable drop in replacements. Continued operation of the legacy system is required as the installation of LLRF 3.0 systems is costly and cannot be completed in a short period of time with the available resources. The most pressing failure in the legacy system was a failing buffer card, which is responsible for communication between the EPICs network and individual RF control modules. A new buffer card was designed as a transparent, drop in, replacement so that upgrades are simply a matter of swapping the existing legacy hardware. This buffer card upgrades a single point failure component and promises to extend the operable lifetime of CEBAF’s legacy systems.

Accelerator Physics↗

Proton beam lifetime increase with 10- and 12-pole correctors in the Relativistic Heavy Ion Collider

10- and 12-pole correctors were installed in a number of machines and are also considered for future machines. In the Relativistic Heavy Ion Collider (RHIC) 10- and 12-pole correctors exist to correct for the detrimental effects of magnetic field errors in the interaction region magnets. These field errors in conjunction with beam-beam effects and parameter modulations dominate the beam lifetime in polarized proton operation. During the 2009 polarized proton run 10- and 12-pole correctors were set through an iterative procedure, and used for the first time operationally in one of the beams. We report on the procedure to set these high-order multipole correctors, compare the found values with calculated ones, estimate the effect of the new corrector settings on the integrated luminosity, and calculate the effect of both the calculated and experimentally found corrector strengths on the dynamic aperture.

43 PARTICLE ACCELERATORS↗

U-Nb Aging and Lifetime Prediction: Assessment for 2012

Aging models and lifetime predictions for U-6Nb alloys were updated. As in previous reports, aging was quantified using quasi-static mechanical properties taken from specimens artificially aged up to 5 years.

36 MATERIALS SCIENCE↗

Proton beam lifetime increase with 10- and 12-pole correctors in the Relativistic Heavy Ion Collider

10- and 12-pole correctors were installed in a number of machines and are also considered for future machines. In the Relativistic Heavy Ion Collider (RHIC) 10- and 12-pole correctors exist to correct for the detrimental effects of magnetic field errors in the interaction region magnets. These field errors in conjunction with beam-beam effects and parameter modulations dominate the beam lifetime in polarized proton operation. During the 2009 polarized proton run 10- and 12-pole correctors were set through an iterative procedure, and used for the first time operationally in one of the beams. We report on the procedure to set these high-order multipole correctors, compare the found values with calculated ones, estimate the effect of the new corrector settings on the integrated luminosity, and calculate the effect of both the calculated and experimentally found corrector strengths on the dynamic aperture.

43 PARTICLE ACCELERATORS↗

Final Report on Reliability and Lifetime Prediction

This document highlights the important results obtained from the subtask of the Goodyear CRADA devoted to better understanding reliability of tires and to developing better lifetime prediction methods. The overall objective was to establish the chemical and physical basis for the degradation of tires using standard as well as unique models and experimental techniques. Of particular interest was the potential application of our unique modulus profiling apparatus for assessing tire properties and for following tire degradation. During the course of this complex investigation, extensive relevant information was generated, including experimental results, data analyses and development of models and instruments. Detailed descriptions of the findings are included in this report.

Gillen, Kenneth T.↗

Recovery Act: Low-Cost, Highly Lambertian Reflector Composite For Improved LED Fixture Efficiency and Lifetime

The overall objective of the program was to demonstrate a 98% or greater reflective, highly diffuse, low-cost composite material that significantly improves luminaire efficiency, is able to withstand 50,000 hours or greater luminaire operation under expected LED system thermal and environmental operating extremes and meets the cost targets required to be an effective commercial solution for the Solid State Lighting industry. This project met most of the goals defined and contributed to the understanding of high reflectance, white coatings. Research under this program increased the understanding of coatings development using particle size reduction techniques and preparation of coating solutions with a broad range of particle types. The research explored scale-up of coating systems and generated understanding of processing required for high volume manufacturing applications. The work demonstrated how coating formulation and application technique can translate to material durability and LED system lifetime. The research also demonstrated improvements in lighting efficiency to be gained using high reflectance white coatings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Battery Lifetime Analysis and Simulation Tool (BLAST) Documentation

The deployment and use of lithium-ion (Li-ion) batteries in automotive and stationary energy storage applications must be optimized to justify their high up-front costs. Given that batteries degrade with use and storage, such optimizations must evaluate many years of operation. As the degradation mechanisms are sensitive to temperature, state-of-charge (SOC) histories, current levels, and cycle depth and frequency, it is important to model both the battery and the application to a high level of detail to ensure battery response is accurately predicted. To address these issues, the National Renewable Energy Laboratory (NREL) has developed the Battery Lifetime Analysis and Simulation Tool (BLAST) suite. This suite of tools pairs NREL’s high-fidelity battery degradation model with a battery electrical and thermal performance model, application-specific electrical and thermal performance models of the larger system (e.g., an electric vehicle), application-specific system use data (e.g., vehicle travel patterns and driving data), and historic climate data from cities across the United States. This provides highly realistic long-term predictions of battery response and thereby enables quantitative comparisons of varied battery use strategies.

25 ENERGY STORAGE↗

Natural Radionuclides and Isotopic Signatures for Determining Carbonaceous Aerosol Sources, Aerosol Lifetimes, and Washout Processes

This is the final technical report. The project description is as follows: to determine the role of aerosol radiative forcing on climate, the processes that control their atmospheric concentrations must be understood, and aerosol sources need to be determined for mitigation. Measurements of naturally occurring radionuclides and stable isotopic signatures allow the sources, removal and transport processes, as well as atmospheric lifetimes of fine carbonaceous aerosols, to be evaluated.

54 ENVIRONMENTAL SCIENCES↗