Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “layered materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Strontium-84 Enrichments in Presolar Grains Provide First Evidence of p -process Nucleosynthesis in Core-collapse Supernovae

This study reports detection of rare p-process isotopes within presolar grains. Presolar grains are relic dust grains from dying stars. These microscopic dust particles are found in primitive solar system materials. Their distinct isotopic compositions record the nucleosynthetic processes in their parent stars and the Galactic chemical environment in which these stars formed. We studied presolar graphite grains of high-density type from the Murchison meteorite and found five grains with subgrains that show enrichments in 84 Sr compared to the solar abundance. 84 Sr is the neutron-deficient isotope of strontium that can be produced in the deep oxygen-rich interior of high-mass stars that end their lives as core-collapse supernovae. The observed 84 Sr excesses cannot be produced in low-mass asymptotic giant branch stars, the source of most high-density presolar graphites found in meteorites. High-density graphites with embedded 84 Sr excesses are, instead, compatible with a core-collapse supernovae origin. The graphite subgrains condensed from carbon-rich materials in the outer layers of core-collapse supernovae, where 84 Sr was destroyed by neutron captures during hydrostatic evolution of the stars and their final explosion. Based on current theoretical stellar models, a few percent of contribution from the inner regions of core-collapse supernovae, which are enriched in p-process nuclides, to the outer carbon-rich regions is the most likely explanation for the observed enrichment of 84 Sr in the subgrains of the high-density graphites. In this study, we present the first observational evidence that core-collapse supernovae produce and eject isotopes made by the p-process.

Astronomy and AstroPhysics↗

Apparatus and method for coating bulk quantities of solid particles

An apparatus and method is described to coat small and large quantities of solid particles using atomic layer deposition, with increased material utilization and decreased cycle times. The resulting higher coating efficiency ALD process is achieved by a controlled pressure differential acting across a rotating porous vessel that contains a plurality of solid particles. The apparatus is comprised of two coaxial cylindrical porous vessels with a means for one to rotate, and a two stage rotary feedthrough with a specialized hollowed out shaft, which enables both rotation of the vessel and reactant, purge, and product gas transport across a particle bed that undergoes mixing.

36 MATERIALS SCIENCE↗

Foil-based additive manufacturing system and method

An additive manufacturing system, method of manufacturing, and fabricated part. The system uses a material joining laser system to join together foil sheets to form a metal part. The material joining laser system can be configured to join adjacent foil sheets together in a substantially uniform manner. The manufacturing system also includes a material removal system that removes material from selected locations of the foil sheets to shape the foil sheets to correspond with selective slices of the part. The material removal system can be a laser system, such as a laser system configured to remove material from a foil sheet without removing material from an underlying layer. One embodiment involves the manufacture of amorphous alloy components.

Tsai, Hai-Lung↗

Two-terminal electronic charge resistance switching device

A two-terminal memory device and methods for its use are provided. In the device, a bottom electrode is electrically continuous with a first operating terminal, and a control gate electrode is electrically continuous with a second operating terminal. A stack of insulator layers comprising a hopping conduction layer and a tunnel layer is contactingly interposed between the bottom electrode and the control gate electrode. The tunnel layer is thinner than the hopping conduction layer, and it has a wider bandgap than the hopping conduction layer. The hopping conduction layer consists of a material that supports electron hopping transport.

Marinella, Matthew↗

Direct synthesis of high-aspect ratio zeolite nanosheets

An example material includes a planar layer of MFI zeolite. The planar layer has a thickness in a range between 4 nm and 10 nm for at least 70% of a basal area of the planar layer. In one embodiment, the planar layer includes an embedded particle of an MFI zeolite.

Tsapatsis, Michael↗

A Machine Learning-Assisted Framework to Control Thermally Anisotropic Building Envelopes in Residential Buildings

To curb the energy consumption of buildings and their related CO2 emissions, Oak Ridge National Laboratory (ORNL) has developed the thermally anisotropic building envelope (TABE) —a multi-layer design comprising insulation materials and metal foils connected to thermal loops. In this study, a machine learning-assisted framework was developed to control the TABE in residential buildings to reduce the computation load for future optimal rule-based control and application. First, a 2D finite element model was established in COMSOL to calculate the hourly heat flux through exterior walls installed with the TABE. Then, TABE wall heat fluxes were simulated for various given indoor and outdoor boundary conditions, as well as thermal loops fluid temperatures and flow rates. Since the finite element simulations are computationally expensive, an artificial neural network (ANN) was then trained to use as a proxy of the finite element (COMSOL) modeling. Finally, the trained ANN model was coupled with the EnergyPlus model to predict the energy consumption of a US Department of Energy prototype single-family house installed with the TABE. An optimal simple rule-based control was determined from predefined rules for a case study. The results demonstrate that the developed machine learning–assisted framework can reduce 99.9% of the computation time while efficiently managing residential building energy for installed TABE walls.

Shen, Zhenglai↗

Coated fuel pellets with enhanced water and steam oxidation resistance

Disclosed herein is a method comprising coating a fissile, uranium-containing ceramic material with a water-resistant layer, the layer being non-reactive with the fissile, uranium-containing ceramic material. The coating is applied to a surface of the fissile, uranium-containing ceramic material. Also disclosed is a fuel for use in a nuclear reactor.

Lahoda, Edward J.↗

Artificial photosynthetic devices utilizing polariton antennas

An organic photovoltaic device comprises a substrate, a reflector positioned over the substrate, a first electrode positioned over at least a first portion of the reflector, a polaritonic antenna layer positioned over a second portion of the reflector different from the first portion, electrically connected to the first electrode, and at least one unit reaction cell positioned over at least part of the first electrode, the at least one unit reaction cell comprising a heterojunction layer comprising a donor material and an acceptor material, positioned over the first electrode, and a second electrode positioned over the heterojunction, wherein the polaritonic antenna and the reflector are configured to convert incoming photonic energy to polaritons. A method of fabricating an organic photovoltaic device is also disclosed.

Hou, Shaocong↗

Fundamental Path Optimization Strategies for Extrusion-based Additive Manufacturing

Extrusion-based additive manufacturing processes begin with a software program, called a slicer, that generates layer geometry and fits toolpaths to each layer to define where material is to be extruded or deposited. Before the toolpaths are output as g-code for the additive manufacturing system to execute, the toolpaths should be optimized. Many complex optimization approaches using graph theory, Chinese postman problem, and other complex mathematical models exist, but these approaches are rarely used in daily printing operations and are not available through common slicing programs such as Cura and PrusaSlicer. Instead, path planning and optimization typically revolves around simpler, fully automated approaches such as inside out and next closest. This paper will explore the fundamental optimization strategies for toolpath planning and document a new implementation, available via open-source slicing software, that allows for greater control of the path planning process.

Roschli, Alex [ORNL] (ORCID:0000000213084632)↗

OLED with hybrid emissive layer

A hybrid emissive layer and OLED incorporating the same are provided. The hybrid emissive layer includes a first material having a triplet state energy level T1 H and a singlet state energy level S1 H , a second material having a triplet state energy level T1 F and a singlet state energy level S1 F ; and a third material having a triplet state energy level T1 P and a single state energy level S1 P , where T1 F $\geqslant$ T1 H ; S1 F $\leqslant$ S1 H ; and T1 P < T1 H

Thompson, Mark E.↗

System and method for atomic layer deposition of rare-earth oxides on optical grade materials for laser gain media

A method is disclosed for doping a quantity of powder particles. A container having a central chamber is initially charged with a quantity of powder particles. A quantity of precursor is sublimed to form a heated precursor. A quantity of carrier gas is mixed with the precursor to form a mixture of heated precursor/carrier gas. The central chamber is charged with the heated precursor/carrier gas and then moved to cause interaction of the powder particles with the heated precursor/carrier gas to form a first monolayer coating on the powder particles. The heated precursor/carrier gas is then removed from the central chamber and the central chamber is charged with a O2/O3 gas under a plasma. The central chamber is then further moved to produce interaction of the O2/O3 gas with the first monolayer coating on the powder particles to modify the first monolayer coating to create a different, single monolayer coating forming an oxide coating on the powder particles.

Miller, John S.↗

Mechanical properties of freestanding few-layer graphene/boron nitride/polymer heterostacks investigated with local and non-local techniques

van der Waals two-dimensional materials and heterostructures combined with polymer films continue to attract research attention to elucidate their functionality and potential applications. This study presents the fabrication and mechanical testing of 2D material heterostacks, consisting of few-layer boron nitride and graphene heterostructures synthesized via chemical vapor deposition, capped with a polymethyl methacrylate layer and suspended across ∼200 μm wide trenches using a combined wet–dry transfer method. The mechanical characterization of the heterostacks was performed using two independent approaches: (a) non-local testing with a custom-built tensile testing platform and (b) local load–displacement testing employing atomic force microscopy probes, complemented by finite element simulations. Both approaches provided new results, which are in good agreement with each other. Overall, our findings offer new insights into a combined load capacity in complex multi-material two-dimensional systems, and can contribute to advancing micro and nano-scale device designs and implementations.

Lespasio, Marcus↗

A Generic Sacrificial Layer for Wide-Range Freestanding Oxides with Modulated Magnetic Anisotropy

Freestanding oxide nanomembranes have promising applications because of their novel electronic states and flexible crystalline structures. Several materials have been developed as sacrificial layers to exfoliate thin films from substrates via wet-etching. However, these materials face great challenges in terms of either complicated crystalline structures or corrosive solutions. Herein, a new sacrificial material, SrCoO 2.5 , is presented, which can be coherently grown with wide-range strains and crystalline orientations and is also soluble in eco-friendly solutions such as acetic acid, vinegar, and even carbonated drinks. With SrCoO 2.5 as the sacrificial layer, high-quality freestanding ferromagnetic SrRuO 3 membranes are achieved from wide-range epitaxial strains and different crystalline orientations. By investigating the evolution of the magnetic properties of these samples, it is discovered that epitaxial strain causes a distinct modification of the magnetic anisotropy of (001) pc -oriented SrRuO 3 samples, while its influence on the (110) pc and (111) pc samples is insignificant. This study not only demonstrates the freestanding SrRuO 3 as a promising material for flexible spintronic devices, but also offers a great opportunity to engineer a wide range of strained and oriented complex oxides for novel freestanding electronics using this newly developed sacrificial material.

36 MATERIALS SCIENCE↗

Octahedral rotations in Ruddlesden-Popper layered oxides under pressure from first principles

The combination of reduced dimensionality and tunable structural distortions in layered perovskite oxides makes these materials ideal platforms for designing novel properties and functionalities. One example is hybrid improper ferroelectricity in n = 2 Ruddlesden-Popper oxides, where the combination of a layered crystal structure and rotations of the metal-oxide octahedra break symmetry and induce a polarization. Precisely controlling the octahedral rotation distortions, for example by the application of hydrostatic pressure, provides a pathway to tune and optimize the properties of these materials. Here we combine group theoretic methods, density functional theory calculations, and Landau theory analysis to investigate how octahedral rotations respond to pressure in the hybrid improper ferroelectrics Sr 3 Zr 2 O 7 , Ca 3 Ti 2 O 7 , and Sr 3 Sn 2 O 7 . We find that factors that are known to control the pressure response of ABO 3 perovskites—the formal charge of the A- and B-site cations, tolerance factor, and B-site chemistry—also impact the pressure response of these layered perovskites. We also show that coupling between the octahedral rotation and strain order parameters plays a key role in determining the overall pressure response. Despite some similarities, we find that these layered perovskites display a distinct pressure response compared to their ABO 3 perovskite analogs. By identifying trends and underlying mechanisms that control octahedral rotations in Ruddlesden-Popper oxides under pressure, this work lays the foundation for tailoring the structure and properties of these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stackable electronics enabled by freestanding 2d and 3d materials

In this talk, I will discuss about our unique strategy to isolate wafer-scale 2D materials into monolayers and stack them into a heterostructures by using a layer-resolved splitting (LRS) technique [1,2]. This technique enables my group at MIT to explore unprecedented wafer-scale 2D heterodevices. While 2D heterostructures promise interesting futuristic devices, the performance of 2D material-based devices is substantially inferior to that of conventional 3D semiconductor materials. However, 3D materials exist as their bulk form, thus it is challenging to stack them together for heterostructures. Obviously, conformal coating of such single-crystalline bulks on 3D features is impossible. My group at MIT has recently invented a 2D materials-based layer transfer (2DLT) technique that can produce single-crystalline freestanding membranes from any compound materials including III-V, III-N, and complex oxides [3,4]. This technique is based on remote epitaxy of single-crystalline films on graphene followed by peeling from graphene. Stacking of freestanding 3D material membranes will enable unprecedented 3D heterostructures whose performance is expected to be superior to that of 2D heterostructures. I will talk about our group’s effort on 3D heterostructures as well as 2D-3D mixed heterostructured devices [5].

Kim, Jeehwan↗

Water soluble barrier coatings for washout tooling for a composite layup

A washout tooling for a composite layup is provided. The washout tooling comprises a casting mold having an exterior surface. The casting mold comprises a particulate material and a water-soluble binder. The casting mold is adapted to break down in the presence of an aqueous solution. The washout tooling further comprises a water-soluble coating layer overlying the exterior surface. The water-soluble coating layer is adapted to break down in the presence of an aqueous solution. The washout tooling further comprises a curable composite layer overlying the water-soluble coating layer. The water-soluble coating layer minimizes contact between the particulate material and the curable composite layer.

Saito, Tomonori↗

Alumina–Titania Nanolaminate Condensers for Hot Programmable Catalysis

Nanolaminates composed of thin alternating layers of Al2O 3 and TiO 2 (ATO) were engineered by using atomic layer deposition as the dielectric material for a Pt-on-carbon catalytic condenser. Investigation assessed synthesis parameters including the deposition temperature, Al 2 O 3 and TiO 2 layer thicknesses, total number of layers, and a capping Al 2 O 3 layer on the maximum charge accumulation in the Pt catalyst. The highest capacitance ATO configuration demonstrated a specific capacitance of ∼1200 nF/cm 2 with working voltages of ±5 V, enabling the storage of 4 × 10 13 electrons or holes per cm 2 at room temperature. The ATO devices exhibited enhanced capacitance at elevated temperatures of up to 400 °C, suggesting the suitability of these materials for high-temperature applications. Adsorption of carbon monoxide on the Pt/C-ATO device characterized by grazing incidence infrared spectroscopy showed changes in the surface binding energy of 13.1 ± 0.8 kJ/mol for an applied external voltage bias of ±1 V.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The transient properties of 2D magnets: from mechanical exfoliation to ultrafast optical spectroscopy of CrX 3 materials

The discovery of two-dimensional (2D) systems hosting intrinsic long-range magnetic order represents a seminal achievement, adding to the already diverse array of physics supported by layered van der Waals (vdW) materials. This finding has spurred great interest among the research community, with efforts aimed at uncovering their fundamental properties and light- matter interactions. A prototypical example of a 2D magnetic material is Crl 3 , where the strong relationship between crystalline structure and magnetic order, along with strong light- matter interactions, provide a promising platform to explore the nature of couplings between magnetism and the other degrees of freedom at the 2D limit. In this report, we highlight our efforts involving the use of time-resolved magneto-optical Kerr effect (TR-MOKE) spectroscopy to probe the magnetization and vibrational dynamics of Crl 3 . These measurements reveal evidence of strong exchange-mediated coupling between lattice vibrations and spin oscillations. Additionally, we discuss our related efforts to explore other material from the Chromium trihalide family through mechanical exfoliation to support subsequent optical spectroscopy investigations.

36 MATERIALS SCIENCE↗