Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “interferometer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Optical isolation in the LIGO gravitational wave laser detector in transient states

This paper presents a numerical analysis of the degree of optical isolation of the laser source by the Faraday isolator in transient states of the laser interferometer gravitational wave observatory (LIGO) detector. This system may be in transient states where the power of the light reflected from the detector to the laser source can exceed many times the power of the source. The present results can be used to analyse the need for installing an additional active mechanical isolation of the source and to evaluate its response time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Raster scanning and averaging for reducing the influence of speckles in optical coherence tomography

The application of small-angle raster scanning and averaging in the sample arm of the Michelson interferometer in optical coherence tomography (OCT) is described. Raster averaging is used to increase the signal-to-noise ratio and to reduce the speckle noise of the 2D OCT image in diagnostics of surface layers of human skin and subcutaneous blood vessels in vivo. The method allows using low-coherence source of low-power radiation and increasing the depth of human skin coherent probing up to 1.5 - 1.8 mm. The reduction of speckle noise in the obtained OCT image for the first time allowed visualisation of subcutaneous blood vessels at the entire depth of their localisation. (biophotonics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Supersensitive SQUID/magnetostrictor detecting system

It is shown that using the state-of-the-art quantum interferometer (SQUID) with the resolution 10{sup -6} {Phi}{sub 0} Hz{sup -1/2} = 2.07 Multiplication-Sign 10{sup -21} Wb Hz{sup -1/2}, coupled to a magnetostrictor, playing the role of tensomagnetic transducer, it is possible to construct a system for detecting pressure variations with the ultimate sensitivity of 10{sup -13} Pa Hz{sup -1/2} and for measuring specific elongation with the sensitivity of 10{sup -24} Hz{sup -1/2}. The analysis of physical grounds of the inverse magnetostriction effect demonstrates concrete ways to essentially higher efficiency of tensomagnetic conversion. The estimates performed demonstrate the possibility of using the SQUID/magnetostrictor system as a detector of gravitational waves. Other possibilities of using this system for solving both fundamental and applied problems are also considered. (experimental techniques)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Comparison of the coherence properties of superradiance and laser emission in semiconductor structures

The coherence properties of a transient electron - hole state developing during superradiance emission in semiconductor laser structures have been studied experimentally using a Michelson interferometer and Young's classic double-slit configuration. The results demonstrate that, in the lasers studied, the first-order correlation function, which quantifies spatial coherence, approaches unity for superradiant emission and is 0.2 - 0.5 for laser emission. The supercoherence is due to long-range ordering upon the superradiant phase transition. (special issue devoted to the 90th anniversary of n.g. basov)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Longitudinal correlation properties of an optical field with broad angular and frequency spectra and their manifestation in interference microscopy

The results of theoretical and experimental studies of the longitudinal correlation properties of an optical field with broad angular and frequency spectra and manifestations of these properties in interference microscopy are presented. The joint and competitive influence of the angular and frequency spectra of the object-probing field on the longitudinal resolution and on the amplitude of the interference microscope signals from the interfaces between the media inside a multilayer object is demonstrated. The method of compensating the so-called defocusing effect that arises in the interference microscopy using objectives with a large numerical aperture is experimentally demonstrated, which consists in using as a light source in the interference microscope an illuminating interferometer with a frequency-broadband light source. This method of compensation may be used as the basis of simultaneous determination of geometric thickness and refractive index of media forming a multilayer object. (optical fields)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Low-coherence interferometry as a method for assessing the transport parameters in randomly inhomogeneous media

The specific features of using low-coherence interferometric probing of layers in randomly inhomogeneous media for determination of the radiation propagation transport length both in diffuse regime and in the case of optically thin media are discussed. The transport length is determined by the rate of exponential decay of the interference signal with the increase in the path length difference between the light beams in the reference arm of the low-coherence interferometer and in the object arm, containing the probed layer as a diffuse reflector. The results are presented of experimental testing of the discussed approach with the use of layers of densely packed titanium dioxide nanoparticles and polytetrafluoroethylene. (radiation scattering)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser adaptive holographic system for microweighing of nanoobjects

A system for measuring the mass of micro- and nanoobjects based on resonance microweighing using the principles of adaptive holographic interferometry is proposed and experimentally implemented. The sensitive element of the system is a microcantilever to which the objects to be weighted are attached. The eigenoscillations of the microcantilever are excited with a laser pulse. The detection of oscillations is implemented using the adaptive holographic interferometer, the key element of which, the dynamic hologram, is formed in the photorefractive crystal CdTe. The detected variation in mass of the particles, attached to the microcantilever, amounted to (420 ± 9) × 10{sup -12} g, the measurement error being 8.5 × 10{sup -12} g. The sensitivity of the measurement system is 1.7 × 10{sup -12} Hz g{sup -1}. The possibility of increasing the sensitivity of the system by 6.5 × 10{sup 6} times and reducing the mass detection threshold by 1.5 × 10{sup 7} times by microcantilevers of submicron size is experimentally demonstrated. (nanoobjects)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modified sensing element of a fibre-optic current sensor based on a low-eigenellipticity spun fibre

We have proposed and investigated a modified sensing element of a spun fibre current sensor for the case when the beat length of the built-in linear birefringence of the fibre is equal to or less than the spin pitch of its helical structure. The proposed configuration makes it possible to restore the interferometer contrast reduced because of the decrease in the ellipticity of the wavelength-averaged polarisation state of radiation propagating in such spun fibre. The modified sensing element contains two polarisation state converters: one, located at the spun fibre input, produces polarisation with ellipticity equal to the eigenellipticity of the fibre, and the other ensures conversion of the elliptical polarisation to an orthogonal one through mirror reflection at the fibre output. We have also demonstrated that the magneto-optical sensitivity decreases slightly for the analysed spectrum-averaged parameters of the polarisation state of radiation in the spun fibre. Experimental data lend support to the theoretical predictions. (fibre-optic sensors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Frequency modulation of semiconductor disk laser pulses

A numerical model is constructed for a semiconductor disk laser mode-locked by a semiconductor saturable absorber mirror (SESAM), and the effect that the phase modulation caused by gain and absorption saturation in the semiconductor has on pulse generation is examined. The results demonstrate that, in a laser cavity with sufficient second-order dispersion, alternating-sign frequency modulation of pulses can be compensated for. We also examine a model for tuning the dispersion in the cavity of a disk laser using a Gires–Tournois interferometer with limited thirdorder dispersion. (control of radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Gas-dynamic perturbations in an electric-discharge repetitively pulsed DF laser and the role of He in their suppression

The gas-dynamic perturbations in a repetitively pulsed DF laser are studied using a Michelson interferometer. Based on the analysis of experimental data obtained in two experimental sets (working medium without buffer gas and with up to 90% of He), it is concluded that such phenomena as isentropic expansion of a thermal plug, gas heating by shock waves and resonance acoustic waves do not considerably decrease the upper limit of the pulse repetition rate below a value determined by the time of the thermal plug flush out of the discharge gap. It is suggested that this decrease for a DF laser with the SF{sub 6} – D{sub 2} working mixture is caused by the development of overheat instability due to an increased energy deposition into the near-electrode regions and to the formation of electrode shock waves. Addition of He to the active media of the DF laser changes the discharge structure and improves its homogeneity over the discharge gape cross section, thus eliminating the reason for the development of this instability. A signification dilution of the active medium of a DF laser with helium up to the atmospheric pressure allowed us to achieve the limiting discharge initiation frequencies with the active medium replacement ratio K ∼ 1. (active media)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Propagation of polarised light in bent hi-bi spun fibres

The evolution of polarisation states (PS's) of broadband light propagating through a bent optical fibre with a helical structure of its refractive index anisotropy (hi-bi spun fibre) has been studied theoretically and experimentally. It has been shown that there exists a coordinate system of PS's in which the differential Jones matrix can be replaced by a diagonal matrix, which allows the polarisation parameters of the output broadband light to be readily calculated with sufficient accuracy. We have derived a formula for evaluating the magneto-optical sensitivity of a bent spun fibre. An approach has been proposed for restoring the degree of polarisation of light in a bent hi-bi spun fibre and, as a consequence, the visibility (contrast) of the interferometer in a current sensor with a sensing element based on the fibre under consideration. (optical fibres)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of a wide-aperture combined deformable mirror for high-power pulsed phosphate glass lasers

A deformable mirror with the size of 410 × 468 mm controlled by bimorph piezoceramic plates and multilayer piezo stacks is developed. The response functions of individual actuators and the measurements of the flatness of the deformable mirror surface are presented. The study of mirrors with an interferometer and a wavefront sensor has shown that it is possible to improve the surface flatness down to a residual roughness of 0.033 μm (RMS). The possibility of correction of beam aberrations in an ultra-high-power laser using the created bimorph mirror is demonstrated. (letters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser adaptive holographic hydrophone

A new type of a laser hydrophone based on dynamic holograms, formed in a photorefractive crystal, is proposed and studied. It is shown that the use of dynamic holograms makes it unnecessary to use complex optical schemes and systems for electronic stabilisation of the interferometer operating point. This essentially simplifies the scheme of the laser hydrophone preserving its high sensitivity, which offers the possibility to use it under a strong variation of the environment parameters. The laser adaptive holographic hydrophone implemented at present possesses the sensitivity at a level of 3.3 mV Pa{sup -1} in the frequency range from 1 to 30 kHz. (laser hydrophones)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Defect modes of one-dimensional photonic-crystal structure with a resonance nanocomposite layer

We have studied the defect modes of a structure of Fabry – Perot interferometer type, in which the layer separating Bragg mirrors is made of a heterogeneous composite material with metallic nanoscale inclusions. Effective optical characteristics of the nanocomposite material have resonance singularities in the visible region of the spectrum, which are conditioned by the surface plasmon resonance of metallic nanoparticles. It is shown that the spectral profile of the energy bandgap of the photonic structure can be modified by varying the volume fraction and size of nanoparticles. The interrelation of splitting and shift of defect modes with structural parameters of a nanocomposite layer is studied by means of a numerical – graphical method with allowance for the frequency dependences of phases and amplitudes of reflectances in Bragg mirrors. (photonic crystal structures)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of an electrodynamic system consisting of a laser cavity and an external weakly reflecting element

The behaviour of the electromagnetic field in a three-mirror laser cavity is described using the method of integral equations. The results of numerical calculations and experimental studies for particular examples implementing the considered configuration are presented. The conditions for optimal tuning of a laser interferometer-deformograph with a three-mirror cavity are determined. The contribution of the reflected and scattered light and arising additional seismic noises to the resulting error of laser gravitational wave detectors is studied. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Acousto-optic gyrotropic-crystal-based modulator with a rotating polarisation vector

We study the influence of ellipticity of gyrotropic-crystal eigenwaves on the output characteristics of an acousto-optic (AO) modulator based on the interferometer scheme. The schemes of AO modulators are considered, which provide the polarisation vector rotation frequency fn /2, where f is the frequency of the acoustic wave, and n is the integer. Preference is given to the scheme combining cascade and polarisation-independent diffraction. An experimental layout of the AO modulator operating at f = 44.5 MHz is described, the modulation frequency of the output laser light intensity being 89 MHz. The frequency of the electrical signal from the photodetector is equal to 179.5 MHz. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detection of electric current pulses by a fibre-optic sensor using spun fibre

We have studied distinctive features of the response of a fibre-optic current sensor with a spun-fibre sensing loop to short current pulses. It has been shown theoretically that, in a reflective interferometer, the polarisation mode dispersion (PMD) in the sensing spun fibre has no effect on the pulsed output signal of the sensor, in contrast to the PMD in a connecting fibre line. The response of the current sensor to a rectangular pulse has linear edges and its duration is determined by the relationship between the current pulse duration and the light propagation time in the spun fibre. The transition from a linear edge to the maximum sensor response is not accompanied by any transient process. The maximum response amplitude corresponds to the response to an equivalent direct current at a current pulse duration exceeding the light propagation time in the spun fibre. The present calculation results and experimental data agree well for current pulses longer than 300 ns at a light propagation time in the spun fibre of ∼1 μs. (fibre-optic sensors)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation of an electro-optic modulator based on the quantum-confined Stark effect in a two-layer InAlGaAs rib waveguide on an InP substrate

An electro-optic Mach – Zehnder modulator based on the quantum-confinement Stark effect in layered multiple-quantum-well InAlGaAs structures on InP substrate is numerically simulated. The novelty of the modulator design is the use of a two-layer rib optical waveguides, which provide technologically efficient (loss of 1.5 dB per element) coupling of the modulator with optical fibre. It is shown that, changing the electrode width and the distance between two waveguides in two Mach – Zehnder interferometer arms, one can match the impedance of the modulator with an external 50-Ω load and the velocities of microwave and optical waves in the modulator. The results of the study can be used in integrated optics, optical communication, and radiophotonics devices. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗