Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “importance sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Discovery and Analysis of Rare High-Impact Failure Modes using Adversarial RL-Informed Sampling

Adaptive learning agents have tremendous potential to handle critical tasks currently performed by humans. Unfortunately, due to their complexity, it can be difficult to verify that these learning agents do not have critical failure modes. Standard verification and validation methods often do not apply directly to learning agents and Monte Carlo methods have difficulty covering even a small fraction of the state space, especially in multiagent systems or over long time horizons. To overcome this difficulty, we demonstrate an adaptive stress-testing method based on reinforcement learning of correlations that raise the probability of failure. This approach has three key properties: (1) it is able to find rare failure modes with far greater sample efficiency than Monte Carlo methods, (2) it can estimate the true probability of a failure mode despite the inherent bias in the learning method, and (3) it is capable of learning and resampling compact representations of multimodal failure spaces. These properties are important in practice as we need to find disparate failure modes while accounting for their actual relevance. This is a significant advantage over traditional adaptive stress testing methods that give abstract likelihoods of particular failure instances, but cannot estimate the probability of a broader failure mode. We test our algorithm on a simple problem from the aviation domain where an autonomous aircraft lands in gusty wind conditions. The results suggest that we can find failure modes with far fewer samples than the Monte Carlo approach and simultaneously estimate the probability of failure.

Validation↗

Discovery and Analysis of Rare High-Impact Failure Modes using Adversarial RL-Informed Sampling

Adaptive learning agents have tremendous potential to handle critical tasks currently performed by humans. Unfortunately, due to their complexity, it can be difficult to verify that these learning agents do not have critical failure modes. Standard verification and validation methods often do not apply directly to learning agents and Monte Carlo methods have difficulty covering even a small fraction of the state space, especially in multiagent systems or over long time horizons. To overcome this difficulty, we demonstrate an adaptive stress-testing method based on reinforcement learning of correlations that raise the probability of failure. This approach has three key properties: (1) it is able to find rare failure modes with far greater sample efficiency than Monte Carlo methods, (2) it can estimate the true probability of a failure mode despite the inherent bias in the learning method, and (3) it is capable of learning and resampling compact representations of multimodal failure spaces. These properties are important in practice as we need to find disparate failure modes while accounting for their actual relevance. This is a significant advantage over traditional adaptive stress testing methods that give abstract likelihoods of particular failure instances, but cannot estimate the probability of a broader failure mode. We test our algorithm on a simple problem from the aviation domain where an autonomous aircraft lands in gusty wind conditions. The results suggest that we can find failure modes with far fewer samples than the Monte Carlo approach and simultaneously estimate the probability of failure.

Validation↗

Designing an Optimal Ensemble Strategy for GMAO S2S Forecast System

The NASA Global Modeling and Assimilation Office (GMAO) Sub-seasonal to Seasonal (S2S) prediction system is being readied for a major upgrade. An important factor in successful extended range forecasting is the definition of the ensemble. Our overall strategy is to run a relatively large ensemble of about 40 members up to 3 months (focusing on the sub-seasonal forecast problem), after which we sub-sample the ensemble, and continue the forecast with about 10 members (up to 12 months). Here we present the results of our testing of various ways to generate the initial perturbations and the validation of a stratified sampling approach for choosing the members of the smaller ensemble. For the initialization of the ensemble we propose a combination of lagged and burst initial conditions. To generate perturbations for the burst ensemble members we used scaled differences of pairs of analysis states (chosen randomly from the corresponding season) separated by 1-10 days. We consider perturbing separately the atmosphere and the ocean, or both. By varying the separation times between the analysis states, we are able to produce perturbations that resemble well-known modes of variability. Focusing on the ENSO SST indices, we found that all types of perturbations are important for the ensemble spread with, however, considerable differences in the timing of the impacts on spread for the atmospheric and oceanic perturbations.Our initial (larger) ensemble size was determined so as to maximize the skill of predicting some of the leading modes of boreal winter atmospheric modes (namely the NAO, PNA and AO). Since it is not feasible for us to run with the larger ensemble beyond about 3 months, we employ a stratified sampling procedure that identifies the emerging directions of error growth to subset the ensemble. By comparing the results from the stratified ensemble with that of the randomly sampled ensemble of the same size, we find that the former provides substantially better estimates the mean of the original large ensemble.

Borovikov, Anna↗

The sensitivity of relative toxicity rankings by the USF/NASA test method to some test variables

Pyrolysis temperature and the distance between the source and sensor of effluents are two important variables in tests for relative toxicity. Modifications of the USF/NASA toxicity screening test method to increase the upper temperature limit of pyrolysis, reduce the distance between the sample and the test animals, and increase the chamber volume available for animal occupancy, did not significantly alter rankings of relative toxicity of four representative materials. The changes rendered some differences no longer significant, but did not reverse any rankings. The materials studied were cotton, wool, aromatic polyamide, and polybenzimidazole.

Hilado, C. J.↗

Carbon-14 ages of Allan Hills meteorites and ice

Allan Hills is a blue ice region of approximately 100 sq km area in Antarctica where many meteorites have been found exposed on the ice. The terrestrial ages of the Allan Hills meteorites, which are obtained from their cosmogenic nuclide abundances are important time markers which can reflect the history of ice movement to the site. The principal purpose in studying the terrestrial ages of ALHA meteorites is to locate samples of ancient ice and analyze their trapped gas contents. Attention is given to the C-14 and Ar-39 terrestrial ages of ALHA meteorites, and C-14 ages and trapped gas compositions in ice samples. On the basis of the obtained C-14 terrestrial ages, and Cl-36 and Al-26 results reported by others, it is concluded that most ALHA meteorites fell between 20,000 and 200,000 years ago.

Fireman, E. L.↗

DA white dwarf effective temperatures determined from IUE Lyman-alpha profiles

The Lyman-alpha profiles of 12 DA white dwarfs have been obtained with the International Ultraviolet Explorer Satellite. Analysis of these profiles provides an improved, uniform, and relatively bias-free measure of effective temperature for these stars over the range 20,000-60,000 K. Simultaneous estimates of surface gravity yield a mean gravity of log g = 7.96 for the entire sample, with the hottest stars tending to have the lowest gravities. A significant exception to this trend occurs in the case of the gravitation of HZ 43. An important by-product of this work has been the determination of a correction to IUE fluxes over the 1150-1350 A range.

Holberg, J. B.↗

The multicomponent structure of bulges

The morphology of disk galaxies is usually described by two major components, the centrally concentrated spheroidal component, called the bulge, and an oblate disk. The ratio of there contribution to the total luminosity - the bulge-to-disk ratio - is one of the parameters characterizing the Hubble sequence. Following de Vaucouleurs (1948), for most galaxies the radial distribution of the outer spheroid is fairly well described by the r exp 1/4 law I(r)=I(sub 0) exp(-(alpha)r), whereas the radial luminosity distribution of the disk follows an exponential law: I(r)=I(sub 0) exp(-alpha(r exp 1/4)) (Freeman 1970), with r the radial distance from the center. I(sub 0) and alpha are characteristic constants for each individual galaxy. Parameters for the structural properties of these components give important constraints for models of the formation and evolution of galaxies. Therefore we have tried to decompose disk and bulge components from high S/N CCD observations of a sample of edge-on disk galaxies. A common procedure for the decomposition is to model one component in a region where it dominates and subtract it from the combined light distribution. This technique was successfully carried out e.g. by van der Kruit & Earl (1981, 1982) and Wakamatsu & Hamabe (1984, 1989). Here we present two more examples of bulge-dominated edge-on SO galaxies, namely ESO 506-G33 and NGC 7123, which show an additional small and concentrated central component besides disk and 'bulge'.

Dettmar, Ralf-Juergen↗

The violent environment of the origin of life - Progress and uncertainties

Dating of terrestrial fossils and returned lunar samples reveals that the origin of life on Earth occurred not in a quiescent, peaceful environment, but rather in a violent, impact-ridden one. This realization has important consequences. On the one hand, sufficiently large and fast impactors can erode planetary atmospheres, and the very largest of these may have sterilized the surface of the Earth. In this regard, deep-sea hydrothermal vents become especially interesting for the history of early life, as they provide an environment protected against all but the greatest impact devastation. At the same time, impactors would have been delivering key biogenic elements (such as carbon and nitrogen) to Earth's surface, and (with much greater difficulty) intact organic molecules as well. Estimates of the various sources of prebiotic organics suggest that the heavy bombardment either produced or delivered quantities of organics comparable to those produced by other energy sources. However, substantial uncertainties exist. After reviewing the current understanding of the role of the heavy bombardment in the origins of life, a number of remaining key uncertainties are considered, and attempts are made to both quantify their magnitude and point to means of resolving them.

Chyba, Christopher F.↗

Atomic data from the iron project. 3: Rate coefficients for electron impact excitation of boron-like ions: Ne VI, Mg VIII, Al IX, Si X, S XII, Ar XIV, Ca XVI and Fe XXII

Collison strengths and maxwellian averaged rate coefficients have been calculated for the 105 transitions among all 15 fine structure levels of the 8 LS terms 2s(sup 2) 2 P(P-2(sup 0 sub 1/, 3/2)), 2s2p(sup 2)(P-4(sub 1/2,3/2,5/2), D-2(sub 3/2, 5/2), S-2(sub 1/2), P-2(sub 1/2, 3/2)), 2p(sup 3)(S-4(sup 0)(sub 3/2), D-2(sup 0 sub 3/2, 5/2), P-2(sup 0 sub 1/2, 3/2)) in highly- charged B-like Ne, Mg, Al, Si, S, Ar, Ca and Fe. Rate coefficients have been tabulated at a wide range of temperatures, depending on the ion charge and abundance in plasma sources. Earlier work for O IV has also been extended to include the high temperature range. A brief discussion of the calculations, sample results, and comparison with earlier works is also given. While much of the new data should be applicable to UV spectral diagnostics, the new rates for the important ground state fine structure transition P-2(sup 0 sub 1/2)-P-2(sup 0 sub 3/2) should result in significant revision of the IR cooling rates in plasmas where B-like ions are prominent constituents, since the new rate coefficients are generally higher by several factors compared with the older data.

Zhang, Hong Lin↗

Preflight and postflight microbiological results from 25 space shuttle crews

Clinical-microbiological investigations are an important aspect of the crew health stabilization program. To ensure that space crews have neither active nor latent infections, clinical specimens, including throat and nasal swabs and urine samples, are collected at 10 days (L-10) and 2days (L-2) before launch, and immediately after landing (L+0). All samples are examined for the presence of bacteria and fungi. In addition, fecal samples are collected at L-10 and examined for bacteria, fungi and parasites. This paper describes clinical-microbiological findings from 144 astronauts participating in 25 Space Shuttle missions spanning Space Transportation System (STS)-26 to STS-50. The spectrum of microbiological findings from the specimens included 25 bacterial and 11 fungal species. Among the bacteria isolated most frequently were Staphylococcus aureus, Enterobacter aerogenes, Enterococcus faecalis, Escherichia coli, Proteus mirabilis and Streptococcus agalactiae. Candida albicans was the most frequently isolated fungal pathogen.

Pierson, Duane L.↗

Ignition and combustion of bulk metals under elevated, normal and reduced gravity conditions

This research effort is aimed at providing further insight into this multi-variable dependent phenomena by looking at the effects of gravity on the ignition and combustion behavior of metals. Since spacecraft are subjected to higher-than-1g gravity loads during launch and reentry and to zero-gravity environments while in orbit, the study of ignition and combustion of bulk metals at different gravitational potentials is of great practical concern. From the scientific standpoint, studies conducted under microgravity conditions provide simplified boundary conditions since buoyancy is removed, and make possible the identification of fundamental ignition mechanisms. The effect of microgravity on the combustion of bulk metals has been investigated by Steinberg, et al. on a drop tower simulator. However, no detailed quantitative work has been done on ignition phenomena of bulk metals at lower or higher-than-normal gravitational fields or on the combustion characteristics of metals at elevated gravity. The primary objective of this investigation is the development of an experimental system capable of providing fundamental physical and chemical information on the ignition of bulk metals under different gravity levels. The metals used in the study, iron (Fe), titanium (Ti), zirconium (Zr), magnesium (Mg), zinc (Zn), and copper (Cu) were selected because of their importance as elements of structural metals and their simple chemical composition (pure metals instead of multi-component alloys to avoid complication in morphology and spectroscopic studies). These samples were also chosen to study the two different combustion modes experienced by metals: heterogeneous or surface oxidation, and homogeneous or gas-phase reaction. The experimental approach provides surface temperature profiles, spectroscopic measurements, surface morphology, x-ray spectrometry of metals specimens and their combustion products, and high-speed cinematography of the heating, ignition and combustion stages of the metal specimen. This paper summarizes the results obtained to date from experiments conducted under normal and high-gravity conditions.

Abbud-Madrid, Angel↗

[Research Programs Conducted by the University of Virginia]: Aquarius - Part 1

The hydrological cycle and the source of water vapor within the Amazon River Basin have important implications on questions of global thermal transport and regional ecological and socioeconomic sustainability. A three tiered approach taking advantage of satellite imagery, tipping buckets, and isotopic storm sampling at three basin sites was used to examine different aspects of regional meteoric water. By combining these techniques, it was possible to correlate observed storm structure with rain rates and intrastorm variations.

Fuentes, Jose↗

Experimental Study of Arcing on High-Voltage Solar Arrays

The main obstacle to the implementation of a high-voltage solar array in space is arcing on the conductor-dielectric junctions exposed to the surrounding plasma. One obvious solution to this problem would be the installation of fully encapsulated solar arrays which were not having exposed conductors at all. However, there are many technological difficulties that must be overcome before the employment of fully encapsulated arrays will turn into reality. An alternative solution to raise arc threshold by modifications of conventionally designed solar arrays looks more appealing, at least in the nearest future. A comprehensive study of arc inception mechanism suggests that such modifications can be done in the following directions: 1) To insulate conductor-dielectric junction from a plasma environment (wrapthrough interconnects); 2) To change a coverglass geometry (overhang); 3) To increase a coverglass thickness; 4) To outgas areas of conductor-dielectric junctions. The operation of high-voltage array in LEO produces also the parasitic current power drain on the electrical system. Moreover, the current collected from space plasma by solar arrays determines the spacecraft floating potential that is very important for the design of spacecraft and its scientific apparatus. In order to verify the validity of suggested modifications and to measure current collection five different solar array samples have been tested in a large vacuum chamber. Each sample (36 silicon based cells) consists of three strings containing 12 cells connected in series. Thus, arc rate and current collection can be measured on every string independently, or on a whole sample when strings are connected in parallel. The heater installed in the chamber provides the possibility to test samples under temperature as high as 80 C that stimulates the LEO operational temperature. The experimental setup is described below.

Vayner, Boris↗

Factors Related to Successful Engineering Team Design

The perceptions of a sample of 49 engineers and scientists from NASA Langley Research Center toward engineering design teams were evaluated. The respondents rated 60 team behaviors in terms of their relative importance for team success. They also completed a profile of their own perceptions of their strengths and weaknesses as team members. Behaviors related to team success are discussed in terms of those involving the organizational culture and commitment to the team and those dealing with internal team dynamics. The latter behaviors included the level and extent of debate and discussion regarding methods for completing the team task and the efficient use of team time to explore and discuss methodologies critical to the problem. Successful engineering teams may find their greatest challenges occurring during the early stages of their existence. In contrast to the prototypical business team, members on an engineering design share expertise and knowledge which allows them to deal with task issues sooner. However, discipline differences among team members can lead to conflicts regarding the best method or approach to solving the engineering problem.

Nowaczyk, Ronald H.↗

AQUARIUS: A Passive/Active Microwave Sensor to Monitor Sea Surface Salinity Globally from Space

Salinity is important for understanding ocean dynamics, energy exchange with the atmosphere and the global water cycle. Existing data is limited and much of the ocean has never even been sampled. Sea surface salinity can be measured remotely by satellite and a three year mission for this purpose called AquariudSAC-D has recently been selected by NASA's Earth System Science Pathfinder (ESSP) program. The objective is to map the salinity field globally with a spatial resolution of 100 km and a monthly average accuracy of 0.2 psu. The mission, scheduled for launch in 2008, is a partnership of the United States National Aeronautics and Space Agency (NASA) and the Argentine Comision National de Actividades Epaciales (CONAE).

LeVine, David↗

Hydrothermal Processes and Mobile Element Transport in Martian Impact Craters - Evidence from Terrestrial Analogue Craters

Hydrothermal alteration and chemical transport involving impact craters probably occurred on Mars throughout its history. Our studies of alteration products and mobile element transport in ejecta blanket and drill core samples from impact craters show that these processes may have contributed to the surface composition of Mars. Recent work on the Chicxulub Yaxcopoil-1 drill core has provided important information on the relative mobility of many elements that may be relevant to Mars. The Chicxulub impact structure in the Yucatan Peninsula of Mexico and offshore in the Gulf of Mexico is one of the largest impact craters identified on the Earth, has a diameter of 180-200 km, and is associated with the mass extinctions at the K/T boundary. The Yax-1 hole was drilled in 2001 and 2002 on the Yaxcopoil hacienda near Merida on the Yucatan Peninsula. Yax-1 is located just outside of the transient cavity, which explains some of the unusual characteristics of the core stratigraphy. No typical impact melt sheet was encountered in the hole and most of the Yax-1 impactites are breccias. In particular, the impact melt and breccias are only 100 m thick which is surprising taking into account the considerably thicker breccia accumulations towards the center of the structure and farther outside the transient crater encountered by other drill holes.

Newsom, H. E.↗

Experimental Study of Arcing on High-voltage Solar Arrays

The main obstacle to the implementation of a high-voltage solar array in space is arcing on the conductor-dielectric junctions exposed to the surrounding plasma. One obvious solution to this problem would be the installation of fully encapsulated solar arrays which were not having exposed conductors at all. However, there are many technological difficulties that must be overcome before the employment of fully encapsulated arrays will turn into reality. An alternative solution to raise arc threshold by modifications of conventionally designed solar arrays looks more appealing, at least in the nearest future. A comprehensive study of arc inception mechanism [1-4] suggests that such modifications can be done in the following directions: i) to insulate conductor-dielectric junction from a plasma environment (wrapthrough interconnects); ii) to change a coverglass geometry (overhang); iii) to increase a coverglass thickness; iiii) to outgas areas of conductor-dielectric junctions. The operation of high-voltage array in LEO produces also the parasitic current power drain on the electrical system. Moreover, the current collected from space plasma by solar arrays determines the spacecraft floating potential that is very important for the design of spacecraft and its scientific apparatus. In order to verify the validity of suggested modifications and to measure current collection five different solar array samples have been tested in large vacuum chamber. Each sample (36 silicon based cells) consists of three strings containing 12 cells connected in series. Thus, arc rate and current collection can be measured on every string independently, or on a whole sample when strings are connected in parallel. The heater installed in the chamber provides the possibility to test samples under temperature as high as 80 C that simulates the LEO operational temperature. The experimental setup is described below.

Vayner, Boris↗

Optical Coatings and Surfaces in Space: MISSE

The space environment presents some unique problems for optics. Components must be designed to survive variations in temperature, exposure to ultraviolet, particle radiation, atomic oxygen and contamination from the immediate environment. To determine the importance of these phenomena, a series of passive exposure experiments have been conducted which included, among others, the Long Duration Exposure Facility (LDEF, 1985- 1990), the Passive Optical Sample Assembly (POSA, 1996- 1997) and most recently, the Materials on the International Space Station Experiment (MISSE, 2001 - 2005). The MISSE program benefited greatly from past experience so that at the conclusion of this 4 year mission, samples which remained intact were in remarkable condition. This study will review data from different aspects of this experiment with emphasis on optical properties and performance.

Stewart, Alan F.↗