Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “identifiability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Cleanroom Microbes Survive Drying, Vacuum, and Proton Irradiation

Introduction : The goal of planetary protection at NASA is to mitigate the risk of contaminating sensitive target bodies with biological life. While many cleaning procedures have been put in place to reduce bioburden on spacecraft, microbes are experts at evolving to survive harsh conditions. Specifically, the dry, low-nutrient environment of a cleanroom (commonly used for assembly of spacecraft) can represent an environment where extremophiles can survive. Methods : Scientists at NASA MSFC wished to gather a snapshot of the microbial population within a variety of cleanrooms on site. A study was undertaken to collect air, surface, and floor samples from clean-rooms and isolate unique morphologies. From this study, 95 isolates were collected and saved in a microbial library. About 86% of these were identified at least to a genus level. Following identification, 24 microbes were selected, based on a literature review, as potential extremophiles. These were grown in liquid cultures, diluted to a set optical density, washed with water, and then applied to a sterilized Kapton coupon. Droplets were allowed to dry overnight in a biosafety cabinet. Coupons were then installed in a pelletron and pumped down to high vacuum (~1E-6 Torr). Samples were then subjected 100 keV protons at a fluence of 2x10 15 p+/cm 2 up to 4x10 15 p+/cm 2 . Following exposure, samples were returned to the microbiology lab where they were pro-cessed by submerging in water, vortexing, and then plating either droplets or spread plates. Recovery data collected was qualitative with a ranking or +, minor, or – for growth. Some selected radiotolerant strains were sequenced using the Illumina sequencing platform. The resulting genomes were annotated with the Rapid Annotations using Subsystems Technology (RAST) server and analyzed for conserved and unique stress response relevant genomic signatures to identify clues related to specific tolerances. Results and Discussion : After five rounds of proton radiation, we narrowed our isolates to five, non-spore forming bacteria that demonstrated survival: Arthrobacter koreensis, Paenarthrobacter nitroguajacolicus, Mycetocola manganoxydans , and an Erwinia sp. Furthermore, we exposed these four microbes to 254 nm wavelength light at an intensity of 80 W/m 2 at a distance of ~18 cm for 10 minutes. Only A. koreensis demonstrated survival following UV exposure. Finally, we performed whole genome sequencing on the four strains to look for genetic markers of stress resistance. When we compared the genomes of the four strains, we found that genes coding for GGDEF and EAL domains with PAS/PAC sensors were only found in A. koreensis . These domains, modulated by PAS/PAC sensors, are hypothesized to facilitate survival under drying, desiccation, and proton irradiation. Drying and Desiccation : PAS domains sense hydration changes and modulate GGDEF and EAL domain activity to adjust c-di-GMP levels, enhancing resistance to desiccation. For instance, in Pseudomonas aeruginosa , the PAS domain of RbdA modulates activity under varying hydration conditions, affecting stress responses [1]. Proton Irradiation : Proton irradiation causes oxidative stress, leading to ROS generation. PAS domains detect this stress and modulate GGDEF and EAL domains to manage oxidative stress responses. In Shewanella , EAL domain proteins modulated by PAS sensors help bacteria adapt to extreme conditions [2]. These genes upregulate other stress response genes, protecting membrane function, protein stability, DNA repair, and antioxidant defenses. The modulation of c-di-GMP by PAS domains is crucial for bacterial adaptation to stress conditions, enabling dynamic physio-logical adjustments [3]. Understanding these mechanisms provides insights into bacterial stress responses and strategies for controlling bacterial growth [4]. Conclusions : These findings indicate that clean-rooms harbor extremophile microbes that may be able to survive conditions in deep space. Furthermore, while we identified certain stress-response genes that may be at least partly responsible for the phenotypes observed in this study, there are likely unidentified genes or characteristics about A. koreensis , and other bacteria, that may allow them to survive in harsh environments. Future studies will focus on identifying these unknown genes and characteristics, further elucidating the mechanisms of extremophile survival and potentially informing the development of new biotechnologies for space exploration and other extreme environments.

Chelsi Cassilly↗
NASA NTRSDate not supplied

NASA’s Top Human System Research and Technology Needs for Mars

NASA is working with industry and international partners to return humans to the Moon and to eventually enable humans to explore Mars. Within NASA, several organizations work together to identify, prioritize, fund, execute, and operationalize the research and technology development (R&TD) that will be necessary to enable crew health and performance (CHP) during these future missions. These organizations include flight programs, the Health and Medical Technical Authority (HMTA), the Human Research Program, the Space Technology Mission Directorate, System Capability Leadership Teams, and other organizations, many of which existed for several years prior to the creation of the Moon-to-Mars (M2M) Program Office in 2023. A variety of constructs, vocabularies, and processes exist for managing risks and supporting strategic planning across these organizations. For example, M2M objectives, program risks, human system risks, human research gaps, capability gaps, and envisioned futures are all constructs currently used within NASA to identify and prioritize R&TD needs. These strategic planning constructs are evolving to allow M2M objectives and R&TD investments to be aligned and traced at a detailed level. A recognized need exists among stakeholder organizations to identify and communicate the highest CHP R&TD priorities in a unified and digestible way that addresses the perspectives of NASA’s CHP community. To achieve this, the HMTA arranged a series of discussions with representatives of NASA’s CHP community, during which the 8 highest priority CHP capabilities that will enable human missions to Mars, referred to as the “top human system capability needs for Mars”, were identified. The list includes Earth-independent human operations; Mars-duration food system; Mars-duration effects on human physiology; risk mitigations for vehicle atmospheres; computational injury and anthropometric models; exploration exercise countermeasures; individual variability in responses to spaceflight; and sensorimotor countermeasures. Existing tools and processes for strategic planning and risk management were evaluated, as well as the technical practicalities, cost, and schedule feasibility associated with potential R&TD investments in different capability need areas. This capability needs report is not owned by any one NASA organization and does not replace existing strategic or program planning processes; rather it aims to complement and inform them with a unified set of community generated priorities. These top capability needs will be re-evaluated periodically based on R&TD progress and the evolving M2M architecture.

technology gaps↗
NASA NTRSDate not supplied

Benchmarking Computational Tools for Calling SNPs and Indels in Complex Microbial Populations

The NASA BioNutrients missions seek to understand the suitability of microorganisms for bioproduction during space flight. One topic of interest is the stability of microbial genomes during long-term ambient storage and subsequent rehydration and growth. To address these questions, samples from 8 species were flown to ISS for 5 years of desiccated storage at ambient temperature (Stasis Packs) and 2 species were packaged along with powdered media inside a bioreactor system to allow hydration and growth in microgravity (Production Packs). For both systems, Whole Genome Sequencing (WGS) of the DNA extracted from the returned samples and paired ground controls will be conducted to identify changes in genome stability due to time, storage conditions and growth in space. Across the technical replicates, ground controls, 10 timepoints, and multiple experimental conditions, ~300 samples have been selected for initial analysis with WGS sequencing to 100x coverage. A flexible and resource efficient mutation calling pipeline is needed to process this large dataset and allow for comparisons between species. Many bioinformatics tools for calling Indels and Single Nucleotide Variants (SNVs) are designed for use with pure isolates, where true variations from the reference genome are expected to dominate the reads aligning to the location of mutation. In contrast, DNA from the Stasis Pack (SP) samples was collected directly after recovery from desiccated storage and the Production Pack (PP) samples were collected after fermentation. In this context, reads with mutations are expected to be less frequent than reads that align with the reference genome, as each sample will include multiple lines of cells. Thus, BioNutrients samples are expected to be similar to samples from cancer cell or “pooled” sequencing approaches. In preparation for the analysis of the BioNutrients samples, we have tested three mutation calling tools (GATK for Microbes, BreSeq and DiscoSNP) designed for complex samples. A challenge of validating mutation identification pipelines is a lack of “Ground Truth” datasets, especially for complex samples. To compare these three tools, we sought to identify mutations in pre-existing WGS data collected from populations of Chlamydomonas reinhardtii that were exposed to UV mutagenesis and growth in LEO as part of the Space Algae-1 mission. Here we present a summary of these tools against the analysis originally conducted using the CRISP tool. Critical metrics are compared such as runtime, the number of SNPs, the number and size of Indels, and patterns of transversion and transitions identified by each tool are reported. By sharing these benchmarking results collected in support of the BioNutrients mission, we aim to guide others seeking to identify SNVs in similarly complex microbial samples.

Biology↗
NASA NTRSDate not supplied

Technology Readiness Assessment for Stirling Power Convertor

Stirling-based power conversion system could represent a critical enabling technology for future NASA missions, offering significantly enhanced power efficiency over traditional thermoelectric systems. To ensure the successful infusion of this technology into deep space and planetary surface missions, a rigorous evaluation of its maturity and associated risks is essential. The objective of this Technology Readiness Assessment (TRA) is to determine the current technology readiness level (TRL) of the Stirling power convertor and identify key technical risks and challenges associated with its maturation and potential infusion into a targeted flight system. The evaluation process will rigorously follow the NASA TRA procedure: (1) determining the requirements that underpin the design, function, and performance; (2) finding and listing all new technology elements (NTEs) and critical technology elements (CTEs); (3) identifying the level of integration assumed for the assessment; and (4) assessing the TRL for each NTE and CTE. The overall subassembly TRL will then be determined via a roll-up using the “weakest link” criterion, culminating in a final (5) assessment of risks to further progression of maturity. This paper will present the results of a comprehensive technology readiness assessment (TRA) conducted on the Stirling-based dynamic power conversion subassembly, excluding the radioisotope heat source. The paper will also describe a detailed breakdown of the TRL roll-up and a matrix of identified risks and recommended mitigation paths, along with identified key technical risks and challenges to achieve the required long-duration performance. Key Words: Radioisotope Power Conversion, Technology Readiness Assessment

Radioisotope Power Conversion↗
NASA NTRSDate not supplied

Phosphate Textural Diversity in CI Chondrites and C-Type Asteroids

Introduction: Apatite, Ca 5 (PO 4 ) 3 (CL/F/OH-), is a ubiquitous phosphate found throughout the solar system, including the most primitive solids, CI-chondrites [1,2] and related samples of carbonaceous asteroids Ryugu [3] and Bennu [4], returned by JAXA’s Hayabusa2 and NASA’s OSIRIS-REx missions, respectively. Apatite in these primitive solids is found as individual grains or mineral clusters and has been inferred to form from the hydrothermal sequence during cooling of their respective parent body or bodies. To better understand the formation history and reworking of these early phosphates we have undertaken a highly coordinated study of phosphate microstructures, geochemistry and U/Pb geochronology from a suite of CI meteorites and carbonaceous asteroid samples. These data have identified novel phosphate microstructures and complex relationships across a suite of apatite grains from the early solar system, indicating multiple episodes of growth and modification on the CI parent body(ies). Methods: Samples of CI chondrites, Alais, Ivuna, Orgueil, Oued Chebeika 002, Yamato (Y) 82162, Y980115, Y980134, and two chips of Hayabusa2 Ryugu particles (A0262 and C0263) have been acquired for analysis. The bulk texture of the samples were first scanned by X-ray Computed Tomography (XCT) using the Nikon XT H 320 within the XFACT facility at NASA JSC or the Xradia 620 Versa at the UTCT facility. Based on the identification of petrofabrics or features of interest from the XCT data, samples were chipped, oriented, potted in epoxy and thick sections were prepared. After anhydrously polishing the samples with silicon carbide and dry diamond powder down to 1 µm, the samples were ion polished using a Hitachi ArBlade. Energy dispersive Xray spectrometry (EDS) maps were collected to ID phosphates of interest using a JEOL 7900F SEM. The internal microstructures of identified phosphates were then mapped by electron backscatter diffraction (EBSD) using the JEOL 7900F. Based on the EDS and EBSD data, domains of interest were targeted for quantitative chemical analyses using a JEOL 8530 EPMA. Subsequently, in situ U-Pb and 207 Pb/ 206 Pb ages will be collected using a Cameca ims1290 secondary ion mass spectrometer at UCLA across a range of microstructures. Results: Apatite grains are ubiquitous throughout the CI chondrites and carbonaceous asteroid materials, found as individual grains, disseminated clusters or grain aggregates. Apatite grains are associated with serpentine, magnet-ite, and/or carbonate. Of particular interest, we have identified individual and aggregate polycrystalline grains ex-hibiting an internal ‘honeycomb’ texture (Fig. 1). Some of these grains appear overprinted by subsequent alteration while others remain unaltered. Apatite halogen sites are dominated by the missing component, assumed to be OH, and F, comparable to published values from Bennu, Ryugu and CM-chondrites [3-5]. However, the Yamato CI-like meteorites show a broader range of Cl values, and one grain from Alais is dominated by CL. Summary: Apatite growth features indicate a protracted and complex growth history, consistent with precipitation from an evolving fluid system. The ‘honeycomb’ texture identified in some CI meteorites is, to the best of our knowledge, the first report of such a microstructure in meteoritic phosphate. The microtextures and zoning will guide subsequent age analyses, to better constrain the formation and reworking of phosphate in CI(-like) materials. Acknowledgments: We thank the National Institute of Polar Research, Japan for samples of Y82162, 980115 and 980134 meteorites, ASU’s Buseck Center for Meteorite Studies for samples of Ivuna and Alais meteorites, and JAXA curation for chips of Ryugu material. This work was funded by NASA ROSES LARS grant 24-LARS24-0014. References: [1] Morlok et al., 2016, GCA 70:5371-5394. [2] Alfin g et al., 2019, Geochemistry 79:125532. [3] Nakamura et al. (2022) Science 379:1-15. [4] Seifert et al. (2026) MAPS 61:504-521. [5] Piralla et al. (2021) MAPS 56:809-828.

CI chondrites↗
NASA NTRS2026

Performance Optimization for Lunar Extravehicular Activity Readiness (POLAR) Study: Methods Paper

To better understand which aspects of physical fitness may be most related to performance during Lunar surface operations and thereby help to inform the current NASA fitness standards, much can be learned from fields encompassing the “tactical athlete.” Other physically demanding professions such as law enforcement, military, or rescue professionals often require candidates to meet occupationally-relevant fitness standards. The determination of such standards is a multistep process, including both objective and subjective measures, to determine tasks essential to occupational performance and identify the minimal fitness profile needed to meet physical demands of the job. Notably, fitness is only one component which may contribute to the demands of astronaut selection, flight assignment, and occupational performance. Utilizing a framework to systematically determine which domains of fitness most contribute to relevant job tasks can aid in the refinement of current NASA-STD-3001 fitness standards. Therefore, NASA’s Exercise Physiology & Countermeasures Laboratory conducted the Performance Optimization for Lunar Extravehicular Activity Readiness (POLAR) study to identify and examine a comprehensive list of fitness tests (including NASA-STD-3001 assessments: 1-Repetition Maximum [1-RM] bench press and deadlift) and determine preliminary relationships between identified fitness parameters and novel Artemis-relevant tasks to help inform future investigations for the continued development of aerobic and muscular fitness standards for surface EVAs. This was accomplished through 1) a review of the literature relating fitness assessments to simulated or real EVA performance to identify fitness tests that are most correlated with simulated EVA task performance; 2) a task analysis following a modified framework for physical employment standards development to down select mission critical tasks; and 3) development and pilot testing of a novel, portable Artemis-relevant EVA task circuit to relate to a battery of fitness assessments. The current report describes the methodology used to complete the task analysis, EVA task circuit development, and the pilot study.

Nicole C Strock↗
NASA NTRS1972

Space tug propulsion system failure mode, effects and criticality analysis

For purposes of the study, the propulsion system was considered as consisting of the following: (1) main engine system, (2) auxiliary propulsion system, (3) pneumatic system, (4) hydrogen feed, fill, drain and vent system, (5) oxygen feed, fill, drain and vent system, and (6) helium reentry purge system. Each component was critically examined to identify possible failure modes and the subsequent effect on mission success. Each space tug mission consists of three phases: launch to separation from shuttle, separation to redocking, and redocking to landing. The analysis considered the results of failure of a component during each phase of the mission. After the failure modes of each component were tabulated, those components whose failure would result in possible or certain loss of mission or inability to return the Tug to ground were identified as critical components and a criticality number determined for each. The criticality number of a component denotes the number of mission failures in one million missions due to the loss of that component. A total of 68 components were identified as critical with criticality numbers ranging from 1 to 2990.

Boyd, J. W.↗
NASA NTRS1972

Remote sensing of soils, land forms, and land use in the northern great plains in preparation for ERTS applications

Research to determine the optimum time or season for obtaining imagery to identify and map soil limitations was conducted in the proposed Oahe irrigation project area in South Dakota. The optimum time for securing photographs or imagery is when the soil surface patterns are most apparent. For cultivated areas similar to the study area, May is the optimum time. The fields are cultivated or the planted crop has not yet masked soil surface features. Soil limitations in 59 percent of the field of the flight line could be mapped using the above criteria. The remaining fields cannot be mapped because the vegetation or growing crops do not express features related to soil differences. This suggests that imagery from more than one year is necessary to map completely the soil limitations of Oahe area by remote sensing techniques. Imagery from the other times studied is not suitable for identifying and mapping soil limitations of Oahe area by remote sensing techniques. Imagery from the other times studied is not suitable for identifying and mapping soil limitations because the vegetative cover masked the soil surface and does not reflect soil differences.

Frazee, C. J.↗
NASA NTRS1972

Transient flow and heating characteristics in a pinched plasma column.

The generation of axial flow and heating of an argon plasma in a pinched plasma column of a pulsed, linear z-pinch device was examined experimentally and analytically. Transient (about 5 microsec) axial pressure profiles identify three characteristic periods in the column history. These include (1) strong axial pressure asymmetry indicative of plasma streaming, (2) isotropic, rapidly rising plasma pressure indicative of plasma heating, and (3) column breakup. An efficient conversion of radial collapse to axial streaming velocity is identified. Mechanisms for such an effect and subsequent heating are evaluated; significance to transients in pulsed plasma accelerators is identified.

York, T. M.↗
NASA NTRS1972

Rocket spectroscopy of zeta Orionis.

Analysis of a spectrum of zeta Ori extending from 922 to 1453 A with approximately 0.8 A resolution recorded at rocket altitudes. All lines used in existing models of stellar atmospheres appear in the recorded spectrum with the exception of those masked by telluric N2 or strong P Cygni-type profiles and by an O V line at 1371.29 A. Fifteen multiplets of subordinate lines have been reliably identified, indicating an approximate range of excitation from 0 to 50 eV. Transitions in C III (1176 A), N III (991 A), N V (1239, 1243 A), O VI (1032, 1038 A), Si IV (1394, 1403 A), S IV (1063, 1074 A), and S VI (933, 944 A) have been observed as P Cygni-type profiles presumably arising in a circumstellar envelope. The degree of ionization, transitions present, and mean radial velocities are all consistent with viewing the envelope as a hot (about 100,000 K), rarefied plasma in which collisional ionization is important. Interstellar lines in C I (1277, 1280 A), C II (1036, 1334 A), N I (1134-1135 A), N I (1200-1201 A), N II (1084-1086 A), O I (1302, 1305 A), Si II (1190, 1193 A), Si II (1260 A), and Si II (1304 A) have been definitely identified. Other transitions in Ar II, S I, C I, and Fe II are tentatively identified. The equivalent width of the L alpha line is found to be 10.4 plus or minus 1.6 A, corresponding to a columnar density of 2.0 plus or minus 0.7 x 10 to the 20th per cu cm.

Smith, A. M.↗
NASA NTRS1972

The light ion trough, the main trough, and the plasmapause

Extensive observations of mid-latitude depletions in electron and total ion density by both direct and indirect techniques, have prompted numerous studies of the possible association between these troughs, observed in the F-region, the topside ionosphere, and the plasmapause. One basic problem arises, in that while the plasmapause was detected as a global phenomenon both by VLF and ion composition measurements, the electron and ion density troughs were identified primarily as nightside features. This problem, as well as the difficulty in explaining various inconsistencies in relating the position of the plasmapause and the ionization trough, is explained by a close examination of the ion composition. In particular, ion composition results from the polar orbiting OGO satellites identify the persistence of a pronounced light ion trough in H(+) and He(+) identified by order of magnitude decreases in the light ion concentrations.

Taylor, H. A., Jr.↗
NASA NTRS1972

Afar and ERTS-1 imagery

The author has identified the following significant results. The excellent ERTS-1 imagery of the Afar region of Ethiopia permits a preliminary revision to the analysis of the structures of this triple-rift junction, and also revisions to the outcrops of some lithological formations. The fault-belts of the Afar floor can now be mapped in fine detail. The Danakil horst is identified to be limited on its western side against Afar by a major fault-line, and it seems unlikely that the horst is the exposed, easterly portion of a west-dipping sialic block underlying all northern Afar. The Salt Plain appears to be a true graben. The Ethiopian plateau-Afar margin consists of a series of right-offset sectors, the offsets being marked by silicic volcanic centers. The nature of these offsets is related to the vexed question of cross-rift faulting. Such faulting is identifiable on the ERTS-1 imagery, both on the Afar floor, and in the monoclinally warped western margin. The significance of this faulting, though subordinate to the tensional faults of the fault-belts, awaits elucidation.

Mohr, P. A.↗
NASA NTRS1972

Evaluation of remote sensing in control of pink cotton bollworm

The author has identified the following significant results. This investigation is attempting to evaluate the use of a satellite in monitoring the cotton production regulation program of the State of California as an aid in controlling pink bollworm infestation in the southern deserts of California. Color combined images of ERTS-1 multispectral images simulating color infrared are being used in crop identification. The status of each field is mapped from the imagery and is then compared to ground surveys taken at the time of each ERTS-1 overflight. Correlation has been to date 100%. A computer analysis will be performed to compare field status with the crop calendar in order to identify crops. Correlation is expected to be 80 to 90%. Cotton fields, because of their state regulated season which is exactly coincident with no other crop, are expected to be easily identified.

Lewis, L. N.↗
NASA NTRS1972

Identification of phenological stages and vegetative types for land use classification

The author has identified the following significant results. Two procedures for examining ERTS-1 imagery were investigated in cooperation with the photographic services section. Positive, 10X enlargements were produced of spectral bands 4, 6, and 7, for a portion of photo 1033-21020. Adequate detail remained to recognize physical features such as streams, glaciers, ice, and snow. Also the entire image was studied using transparencies produced by the 3M color-key process. A combination of three complementary color combinations produced visually recognizable shades apparently indicating vegetation differences. Also lakes and glacial streams of sufficient size, ice and snow, and drainage patterns can be recognized. A need is indicated for oblique low level color aerial photography in the vicinity of identifiable terrain features to assist in the positive location of vegetative communities appearing in the analysis process. In the primary areas of concern to this project identifiable manmade features are conspicuous by their absence. In image 1049-20505 band 7 produced distinct tonal differences on a mountain slope to river bottom gradient.

Branton, C. I.↗
NASA NTRS1972

Identification, definition and mapping of terrestrial ecosystems in interior Alaska

The author has identified the following significant results. A reconstituted color infrared image covering the western Seward Peninsula was used for identifying vegetation types by simple visual examination. The image was taken by ERTS-1 approximately 1120 hours on August 1, 1972. Seven major colors were identified. Four of these were matched with four units on existing vegetation maps: bright red - shrub thicket; light gray-red - upland tundra; medium gray-red - coastal wet tundra; gray - alpine barrens. In the bright red color, two phases, violet and orange, were recognized and tentatively ascribed to differences in species composition in the shrub thicket type. The three colors which had no map unit equivalents were interpreted as follows: pink - grassland tundra; dark gray-red - burn scars; light orange-red - senescent vegetation. It was concluded that the image provides a considerable amount of information regarding the distribution of vegetation types, even at so simple a leval of analysis. It was also concluded that sequential imagery of this type could provide useful information on vegetation fires and phenologic events.

Anderson, J. H.↗
NASA NTRS1972

Survey of the seasonal snow cover of Alaska

The author has identified the following significant results. The delineation of the transient snow cover can generally be made directly from any of the RBV of MSS images. On many glaciers, however, there seems to be a relatively small difference between the reflectivities of snow and ice in the visible portion of the spectrum (corresponding to MSS bands 4 and 5). On the other hand, the reflectivity is distinctly lower for ice than for snow in the near infrared (MSS bands 6 and 7). By applying the sensors of the latter spectral bands the position of the transient snowline, indicative of the mass balance, can in many cases be determined with what appears to be a satisfactory accuracy. This circumstance should prove especially useful in studies of regional variations of glacier mass balances. It had been found that the effect of winds early in the fall seasons can be seen on the arctic slope when a light dusting of snow is present. Winds channeled by topography redistribute the snow and actually remove it from regions. After freeze up has occurred and a continuous snow cover exists it is possible to identify open water reaches on streams flowing through the region. Such cases are identifiable on the ERTS images especially on the MSS 7 images.

Weller, G. E.↗
NASA NTRS1972

Evaluation of feasibility of mapping seismically active faults in Alaska

The author has identified the following significant results. A previously unmapped seismically active fault has been identified in south-central Alaska on the basis of ERTS-1 imagery. It can be traced for at least 120 km. An unmapped fault was found on the northwest flank of Mt. Sanford that is apparently a reverse fault. A large scale, seismically active fracture system has been identified in central Alaska on the basis of MSS imagery. The system consists of two sets of fractures which intersect at an angle of about 55 degrees. The dominant feature of the system is the Minook Creek fault, on which an earthquake of magnitude 6.5 occurred on October 29, 1968. A possible related feature is a 60 km long lineament near the Toklat River north of Mt. McKinley. These areas are all moderately seismically active. Focal mechanism studies of the 1968 earthquake revealed that left-lateral displacement had occurred on the Minook Creek fault due to compressive stress. A similarly oriented direction of compressive stress could be responsible for the entire fracture system.

Gedney, L. D.↗
NASA NTRS1973

Automated thematic mapping and change detection of ERTS-A images

There are no author-identified significant results in this report. This investigation is concerned with the development of automated interpretation techniques for the recognition and identification of earth resources. The resources will be identified by using both multispectral and spatial signatures. Ground truth data and aircraft underflight photography will be used to train the recognition algorithms. The data processed will be RBV and MSS images acquired by ERTS-1 satellite, over six test sites located in the vicinities of: Phoenix, Arizona; Weslaco, Texas; Cascade Mountains, Washington; New Orleans, Louisiana; Salt Lake City, Utah; and Salton Sea, California. The processed data will be thematic maps of resources consisting of annotated and outlined images. The seasonal changes of hydrologic and agricultural resources will also be identified. The results are expected to be applicable to a future automatic system of resource inventory and management.

Gramenopoulos, N.↗